Won't connect to one specific page

My airport express 802.11n firmware 7.4.1 won't connect to www.clubepeugeot.com
tried everything:
-IP
-firmware
-DNS
if a connect the cable modem directly to my macbook i can surf the webpage. Using the aiport all other pages seem to work except this one...

GabrielCR_BR wrote:
My airport express 802.11n firmware 7.4.1 won't connect to www.clubepeugeot.com
Try visiting http://67.210.120.128 (the IP address of that URL). If you can reach the Web site, there's something wrong with the DSN services that your Mac and/or AirPort Express are using.
How is the Express configured? What do you see in "DNS Server(s)" in the Internet panel, "TCP/IP" tab?

Similar Messages

FaceTime won't connect to one specific contact.

I'm having trouble with FaceTime.
I was able to FaceTime my girlfriend 3 nights ago and it worked perfectly fine. After about half an hour however it cut off and ever since then I haven't been able to connect to her. She tells me that she is able to FaceTime all of her other contacts but as soon as she goes to FaceTime me it doesn't work.
The call comes through but when either of us click answer, it stops at connecting and after so long says "so and so is not currently available to FaceTime".
Does anyone know what is causing this problem and how it could be solved?

Hi Tibbles96,
If you are havin issues with FaceTime on your iPhone, either generally or with a specific contact, you may find the troubleshooting steps in the following articles helpful:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
Regards,
- Brenden

When I publish my site on one specific page where i've added {tag_pagecontent} I get the error:Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.

When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
http://www.musicstudentsforhire.co.uk/musicians-samples.html
It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.

I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.

I have a file with 64 pages in it. How do I save and email one specific page out of the file?

I have a file with 64 pages in it. How do I save and email one specific page out of that file?

With nothing but the free Reader? Take a screenshot of the page and email the image.

My macbook pro won't connect to one of my internet connections, it did in the past but not now. Can't be resolved with airport diagnostics. Help would be appreciated

I have tried so many times to resolve the problem and I have no idea what's up. I disconnected my modem and all of a sudden my macbook won't connect ever since. The only way to get on is to use an ethernet cable.

have you tried telling your computer to forget the network and then trying to reconnect it that way?

IMessages won't deliver to one specific contact

Hi there,
I'm having problems with iMessage on my iPhone 4S.
I'm trying to send iMessages to one specific contact - the messages are sending (the progress bar at the top of the messages app completes), but the 'Delivered' notification never comes through. It's most strange, as I was iMessaging this person yesterday without any problems - it's only been a problem since this morning.
I can send/receive iMessages to other contacts without any problems as well, which makes this case even stranger.
I've tried a few suggestions to fix the problem, but so far none of them have worked.
I've turned the phone off and on again multiple times, I've reset my network settings, I've deleted the message thread with this particular contact and started a new one, I've deleted and re-added the contact, and I have turned iMessage off and back on. Nothing has fixed this.
It's not a major problem, but I have to hold down each message and send as a text to this one contact.
I'm not on a contract, don't have phone credit and will run out of free texts soon, so I was wondering if anyone had any suggestions, bar restoring my phone to factory settings - don't really want to go through the effort of putting 13GB of music, photos etc back onto it.
Thanks for your time.

if ur able to message everyone else just fine, AND u have already deleted that person as a contact and restarted the thread with them, then its not ur phone at all. its theirs. and they need to troubleshoot y they are not receiving imessages.

Remote Desktop Connection Times Out With "Can't Connect" From One Specific Computer Only

This is an odd one... I manage several servers from this computer. This particular server, 2012 Essentials, won't allow for remote desktop connections to either the server or attached workstations. I can get into the server's remote web page but when I
attempt a remote desktop connection, it hangs on "Initiating remote connection..." and then times out with the error response that remote desktop can't connect. But... if I attempt the same connections from any other computer, I am able to get in
and utilize remote desktop. Does this mean that there is a certificate issue with the computer unable to connect and if so, how does one remedy this? Or is it some other issue? I've attempted everything within my technical ability to no avail. Any suggestions
are greatly appreciated.

Hi,
Before going further, would you please let me know the RDC version that used in the problematic computer? Was it the same with other computers?
Please temporarily disable firewall and then check if this issue can be solved. Based on your current description, it’s hard to say the root reason of this issue.
So, I suggest that you should check relevant log files and get some clues. It will help us to narrow down and solve your issue.
Hope this helps.
Best regards,
Justin Gu

Lacie disk won't work with one specific mac

we got two mac pros at work, each with an external lacie 1TB drive. now, one of them won't be detected by the mac pro it's normally hooked up to. it just makes a ticking sound every second. however, when i connect it to the other mac pro, it works just fine. any suggestions?

Disconnect and power down the ext HD, zap the PRAM and NVRAM, as described in http://support.apple.com/kb/HT1379 restart, hook up the ext HD, and see if that fixes the issue.

Won't connect to one website

I have a 2009 Mac Book Pro. Last couple of days, our internet connection has been slow. Today, it crashes for awhile and when it returns, I cant get the one website I need to load on any of my browsers (Chrome, Safari, Firefox). I cleared caches, restarted, all for nothing. And, my wife's computer, 3 feet away, same IP address, connects just fine. Any ideas? I'm not entirely sure this is a Mac issue but I'm stumped. Every other website (including other sites I manage on the same server) loads fine.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

How can I save one specific page from a .pdf file into it's own .pdf file?

I've got this 4 page pdf file, and I need to save just one page from it. I know that there's the option of using the select tool and doing a copy/paste to an image file, but I'm trying to keep it as a .pdf and I can't seem to figure it out. Any help would be much appreciated.

Perhaps this solutions workability will depend a lot on what type and generation of PDF you got and the tech built into the program suggested....
But ! (never-the-less)
You could try to see if the "Free PDF to Word Doc Converter version 1.1" will work for you....
I know it will not get you a single page .PDF but if the program works you could get a .Doc of which you might have the possibility to save a single page after editing it !(?)

Sqlplus won't connect w/o specification

I have defined
ORACLE_SID=MYDB
Which is defined as a remote database in my tnsnames file.
SQLPlus will only connect when I
Enter user-name: sparks@mydb
If I don't include that:
Enter user-name: sparks
Enter password: ********
ERROR:
ORA-12545: Connect failed because target host or object does not exist
How can I make that work w/o having to specify the database?
=== Al

Not to nit-pick, but it depends on the shell you're using.
csh syntax is
set SOME_ENVIRONMENT blah
whereas bourne shell syntax (including bash) is
SOME_ENVIRONMENT=blah
export SOME_ENVIRONMENT
With bash (and maybe ksh) you can shorten this to one line with:
export SOME_ENVIRONMENT=blah
=== Al

I'm getting "The connection has timed out" when I try to connect to one specific website. I can connect to the site using Internet Explorer. Help?

As suggested by Firefox, I cleared my history and cache. I also downloaded and ran one of the Firefox recommended malware applications. I also removed Firefox from my firewall and then added it back as suggested by Firefox. I have no problem accessing the site using Internet Explorer.

Thanks jscher2000. Yes, in Safe Mode I was able to go the site. I read the possible ways that Firefox suggests to try to fix the problem, i.e., go through all my extensions to find the problem or reset Firefox to the original factory settings. Where do you suggest I go from here?

TS3276 Mail 6.0 won't connect to one of my accounts, only since upgrade to OSX 7

My Mail account fails to connect and it prompts me for my password which fails to resolve the problem. This has only occurred since my upgrade to OS X 10.7. I have verified all of the accccount settings (by comparing them to my iPad Mail account setting which still works). Is there a glitch in Mail 6.0? I have a 2011 MPB 15" 2.0 GHz 4/500 with Snow Leopard. Thanks.

I'm sorry if I sounded glib or insulting to you. That was not my intent. Ssince I initiated this inquiry I have shut off my MBP, left it alone for about 3 hours and when I returnned to it, it worked fine.
As for the test procedure, The top light was green (Connected to internet), the second line was red ( comcast.net unable to connect to this server) the third light was green (iCloud connection and login succesful) and the last line was red (smtp.comcast.com could not login to server).
I hope I haven't wasted your time but this has been occurring to me intermittently since I upgraded to OS 10.8.
I appreciate your time.

Ichat won't connect with one computer; others fine

I was able to video iChat with my parents (new intel iMac, X.5.2) with no problems previously. Now, we cannot video or audio chat. The interesting thing is that I can video chat with others and my parents can video chat with others, just not with each other. We were even able to video chat via a 3-way chat a few days ago that a third party initiated and invited us both in. But if we try to chat with each other, no connection. IMing works, but that is it. I have checked that no users are blocked on both computers. Since both computers have internet access and iChat capability with other computers, I don't think it has to do with firewalls!?! Both computers use WideOpenWest cable as their ISP. Another user that my parents can iChat with is also a WideOpenWest customer. Weird! Any thoughts? Thanks!

Hi
First have you all set the Quicktime streaming setting, goto sys prefs/quicktime/streaming/streaming speed, set to 1.5mbps(
In ichats prefs click on video and change bandwidth limit to 500.
Restart iChat.
Tony

Mail won't connect to one

In the last day Mail will not connect to my Comcast mail account (but it will connect to a different account I have). I have double-checked my settings and everything looks as it should. I have tried the Safe Boot and deleting the two files from the Library as suggested in other posts, but with no positive results. Any thoughts or suggestions would be greatly appreciated.
I don't if these issues are related, but I'm also having trouble accessing secure web sites with Safari:
http://discussions.apple.com/thread.jspa?threadID=2041491&tstart=0
I am able to access these same sites via Firefox.

Hi Bryon, and a warm welcome to the forums!
On the Safari problem, (since I don't go there often I'll try answering here).
Open System Preferences>Network>Configure>Proxies Tab, make sure none are set, like for HTTPS, especially.
Mulling the Mail problem until I hear on Safari problem!

Won't connect to one specific page

Similar Messages

Maybe you are looking for