Won't convert files, unidentifiable error

I am trying to combine word files into one PDF, I've done this many times in the past. Now it says there is an unidentifiable error
I get a message that says "Missibg PDFMaker Files"
Now I get a message that says "network resources unavailable" Error 1706 I need to access "AcroStan.msi" I don't know what any of this means

We don't know that you have malware. I just think it's important that you find out what broke your copy of Acrobat (unless a small child had five minutes alone with the computer, that will do it...)
Most malware is caught by antivirus software, try a scan.

Similar Messages

"Convert file from:" error box

Every time I click on a PDF file to download, the downloads window comes up and shows the download progress, and when the download finishes, a box appears that says "Convert File". In the box it says: Convert file from: then it lists various file types i.e., Text only, MS-DOS Text, Rich Text Format, HTML Document, Single File Web Page, Unicode Text and many more. It is trying to open a PDF file in Microsoft Word. I can't figure out how to change this. Help please?!

That does not sound like Safari behavior. Are you using Safari to download, or another browser such as FireFox?
Edit: Actually, I re-read what you wrote and saw that you said it was trying to open using MS Word. So I think the "convert file" message is coming from Word.
Therefore, I think you have .pdf files currently set to open using MS Word. So after Safari completes the download, it is handing it off to MS Word to open, and MS Words is running and asking how to convert it to one of the formats Word supports.
If the above sounds reasonable based on a lot of assumptions I made, you can try the following. First show any PDF file you already have in a Finder window. Right (Control) click on it, and select +Get Into+. In the Info window, look for +Open with+. In that section, if it currently set to open using Word, select either Preview (default setting) or +Adobe Reader+. Then, click the button below that setting that says +Change All+. This should change the setting so that all PDF files open with whatever app you selected that is not Word.

Won't convert files using Export pdf.

I have installed export pdf and used it successfully over the last two years .My subscription is recorded as paid. When I try to convert i get an error message " An error occurred while trying to access the service"
I tried Adobe support and eventually got referred to an advisor in Asia. Who tried to help but there were difficulties in the conversation. He asked to access my machine and i had to go to a link for Adobe Connect. This just kept hanging. So I was asked not use Mozilla but go to Explorer I did this but explorer would not accept the link and when I said that to my contact he disconnected the phone. Altogether i wasted around 40 minutes on the phone.
As you cannot e mail Adobe it would appear I would have to restart that length process with possibly the same result.
Anyone any ideas?

Hi K nicholls,
Are you using Adobe Reader to access the Export pdf service to convert the file.
If so please update Reader to the latest v 11.0.10 and then check. Also make sure you are signed in with your Adobe ID in Reader.
Can you please also try signing in to the web url: https://cloud.acrobat.com/exportpdf with your Adobe ID and check if you are able to convert the file or not.
Regards,
Rave

CS6 Won't open files - Program Error

When I try to open files in CS6, I get an error "Could not complete your request because of a program error."     I have restarted PS and rebooted the machine.
Running Mac OS 10.6.8
2.8 GHz   Core i7
12 GB Ram
The same files open fine on CS5.

Chris,
There are no log files in the settings folder.
Curt,
I have the "Open in CS6" available in Bridge.   When I open a jpg from Bridge, same PS error. If I open a CR2 in ACR, ACR is fine, but when I tell it "open image" (in ACR), ACR closes, and nothing happens in Photoshop. No message. If I double-click a CR2 image from bridge, I get the PS error.
Howard,
Same error regardless of file type.
Thanks for the help.

Won't copy Files -50 error code?

Hi all,
I connected an usb external hd to my G4 ibook with OS X 10.3.9. I am trying to copy a couple of critical mpeg2 files. The hd is from a pecee xp. The mobo went bad. I just need to copy these mpeg2 video files to my mac. These files can't be replaced. When I try to copy them, it starts great and starts copying as fast as usual then stops after about 30seconds and gives the -50 error that says an unexpected error occured. I REALLY need to get these files to my mac. Did I mention how much I hate pecees! Please if anybody can help I would really appreciate it.
-Tom

Just before your last reply, I took the ext hd and connected it to my other mac, powerbook G4 and tried to copy one of the files to it. It did the same thing, started fine, then stopped and gave the error. I noticed that when it stops, the light on the ext hd holds. So that gave me the idea to try to view one of the files using quicktime on the mac, just leaving the file on the ext hd. It did the same thing. It started to play fine, went a few minutes, then just froze. The ext hd light stayed on hold. I didn't touch it. After about a minute or so, the video would just continue where it left off, and then it would play a few minutes and then freeze, and continue the same cycle. It is a direct usb connection, but it was acting like it was buffering or something. So now I think you have gotten to the root of the problem. I think the ext hd has some type of problem itself. I don't think it is the mac at all. So, I guess I am going to have to give up on getting these files off of it. The thing that is bad is the hd is only a few months old. It is a seagate 120gb, which I bought new. I just wish there was a way to get the copy function on the mac to do the copy and just wait when the hd does it's stalling thing, then resume the copy when the hd stops stalling?

Quicktime won't open files; gives Error -43 message.

Whenever I try to open file with quicktime I get an error message reading: "Error -43: a file could not be found (files name)" I have tried re-installing and repairing quicktime. Any suggestions? I am runnig windows Vista.

I've expierenced error 43 in the past myself and the only two things that I was aware of that caused it, was having a drive named in a way QT could not recognize, or the number of characters in a file name being limited to 21 or less.
I have never used Adobe Premiere so have no info on that.
But where you indicate a administrator issue which is related to permissions. This link may give you some info on how to navigate Windows permissions. It is in XP but you can look up for whatever OS is on the computer.
http://support.microsoft.com/kb/308421

Trouble Converting Files

I've had many problems with Nokia PC Suite but I won't mention all of them just the ones I've had to deal with recently.
Often, and I'm sure a lot of Nokia users will agree with me, Nokia Music Manager won't convert files. It will say that that particular file format is not supported. I can convert probably most mp3 files to M4A (Mobile Optimised Format 48kb/s) which usually works fine. Some mp3s it won't convert and says it doesn't support that format, yet it has supported all the other mp3s that worked. I know it may be a bitrate problem, but I have a program that can convert a music file to a different bitrate and sometimes when I change the bitrate of the file then it works. However sometimes this doesn't even work. It doesn't even work if I change the conversion settings to different M4A format or bitrate. It will sometimes let me convert it to the lesser quality ACC format which sounds terrible on a phone, like its been recorded with a microphone from the radio speakers.
I've had a lot of problems with converting files but I won't go into them all. The main one which I'm concerned with is why does Nokia Music Manager not convert MANY mp3 files???? When they clearly work and I can clearly play them fine. I've had to do without a lot of good songs on my phone since Nokia Music Manager simply refuses to convert them! I thought surely the updates might have addressed this issue and it's not like it won't convert one or two files out of my whole collection as even this would be acceptable (even if I still didn't know the reason why), but it doesn't convert MANY files. Not most of them, but whenever I want to chuck a bunch of songs onto my phone, chances are there will be at least one or two that will refuse to convert.
OS: Windows Vista Home Premium
Phone: Nokia 6300, connected via Bluetooth
Nokia PC Suite Version: 7.0.9.2
Noka Music Manager Version: 2.0

I think 6300 is a great music player when listened thru a good earphone. It can also play mp3 and wmv format. So, you don't have to convert them. You can listen to mp3's using 6300.
Personally, I agree with a lot of people against converting from one lossy audio to another as it loses audio quality, like mp3 to aac. So, I put in a 2gb card and use at least 128kbps on my mp3s, aac or wmv for really good music. I use Windows Media Player 11 to organize and transfer music files to my 6300 as WMP is great in organizing music files.
Message Edited by lowbatt on 26-Dec-2008 05:16 PM

No PDF file was created because Acrobat encountered an unidentified error.

Product:
Adobe Acrobat 8
Windows XP SP3
Problem:
when user try to combine multiple PDF files into one file from network drives (hence that user have full permissions), received this error:
"Error (file skipped)
No PDF file was created because Acrobat encountered an unidentified error."
Steps taken so far:
- cleared windows temp files
- cleared acrobat temp files
- tried, same error
- ran acrobat repair, tried it out, same error
- made adjustments to "PDF Printer Properties per this article
http://www.experts-exchange.com/Web_Development/Document_Imaging/Adobe_Acrobat/Q_23903725. html
- tried again, no luck.
- removed adobe acrobat and reinstalled it completely from scratch.
- ran updates
- tried again, no luck.
- granted the user full permission access to acrobat folder under program files, still same error
- then, copied files that I need to convert locally to the system and tried to combine them, it worked!
- its not permission issue as I tried the same from my domain admin account and received the error.
- also the user reported that acrobat takes 15 o 20 sec each time opening a file
Any ideas?!
Thanks!

If I change the properties to open as administrator, within the program I can combine pdfs over the network drive.
. I can't drag and drop or combine pdfs from windows explorer and everytime I open acrobat it asks if it can make changes.
So it's still best to copy to c drive in order to use Combine and Portfolio features but would be really nice to use as designed.

Download Helper, even with paid converter upgrade, gives "Invalid Capture File" errors and will not record audio, with "File Creation Error - Unable to rename/copy audio file" Error.

Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
The paid upgrade of "Converter" doesn't work.
Instructive documentation - not very good.
Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
Could use timer tracking of the record process.
Are there operating system limitations? (Have Windows XP Pro)

That is an issue for the developer of that Download Helper.

I used to use the free version of Adobe Reader to convert my publisher files to pdf files. When I was making a booklet for our hockey team, it said I had to buy it. Now I bought it and it won't convert the files. I am ready to throw this computer out the

I used to use the free version of Adobe Reader to convert my publisher files to pdf files. When I was making a booklet for our hockey team, it said I had to buy it. Now I bought it and it won't convert the files. I am ready to throw this computer out the window!! Can you tell me what is the problem? No it does not exceed 100 M. either.

Adobe Reader never converted Publisher files to PDF, for free, never. I suspect you use to have the (paid for) Adobe Acrobat. Sometimes people have Acrobat (more than $300 worth) and install Adobe Reader over the top, losing that valuable software.
That said, if you subscribed to PDF Pack it should do this conversion. What exactly happens now.

I'm getting a 9041 error when trying to convert files to AAC -- any ideas on how to fix it? the files files in iTunes show up as Apple Lossless but i can't put them on my iPod

i'm getting a 9041 error when trying to convert files to AAC -- any ideas on how to fix it? the files files in iTunes show up as Apple Lossless but i can't put them on my iPod

"I have been able to convert to AAC by first converting to AIFF and then to AAC. This is a pan though."
this worked for me.
thanks.

I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files the error message is could not be opened. The movie's file format isn't recognized. " Any help or are they corrupted

I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files, the error message is "could not be opened". The movie's file format isn't recognized. " Any help or are they corrupted?

Sounds to me like the file is probably corrupt. If you had hard drive corruption or damage, that could easily result in recovered files not being fully intact. If you were trying to recover accidentally deleted files, it's possible they might have been partially overwritten before recovering. There are never any guarantees with file recovery.
Without more information on the circumstances that led you to try recovery, it's hard to give advice on what to try from here. You could always try another file recovery tool, like Data Rescue 3. Just be sure you're taking appropriate precautions when doing recovery. See Recovering deleted files.

Firefox crashes and when attempting to launch after the crash it won't and throw and error msg that js.3250 can't be found- but same file is in Mozilla directory. I must then download new 3.6.8 and lose all tabs.

# Question
Firefox crashes and when attempting to launch after the crash it won't launch; throwing an error msg that " js.3250 can't be found" - but same file is in Mozilla directory.
I must then download new 3.6.8 and lose all tabs and history.

I have a similar problem. Recently my FF8 has been crashing a lot. It regularly locks up an entire core of my PC and often just shuts down. It has just done it a moment ago and when it started back up it did the whole "this is embarrassing" thing and asked me if I wanted to reload my tabs. I deselected the one that I was trying to view as I suspected that it may have been the cause (unlikely; it was node4.co.uk) but anyway, let's skip it just in case. Click on the button to restore and up pops my homepage only. So all of my other tabs, which I was using for work incidentally, are gone.
This is not the first time this has happened on FF8. It happened a lot recently on FF6 I think it was (so hard to keep track now, Mozilla) and I switched to Chrome as a result, but it turns out that it crashes even more than FF6 did. FF7 was a vast improvement but FF8 is so unstable/unpredictable for me at the moment that I think I'd rather use IE9 than this. It's driving me mental, clearly! I wish I could kill the process manually and have it retry restoring tabs. Hey, there's an idea Mozilla; give us a menu item that allows us to restore the session to how it started to try again or at the very least get a list of the pages we were looking at. They don't show up in Recently Closed Windows and the Restore Previous Session is greyed out too. Gah! Help!

Just tried to import CD in my iTunes music library, but get this error code "error occurred while converting file. You do not have the privilege to make changes"....any thoughts? Have not tried to change anything- only import CD ??

Just tried to import a new CD into my iTunes music library, but get this error code "error occurred while converting file. You do not have the privilege to make changes"....any thoughts? Have not tried to change anything- only import CD ??

Do you have read& write permissions to your iTunes library?
See this thread: Re: "Error has occurred... You do not have the privilege to make changes."

In 10.7.3 I get a message: error occurred while converting file. You do not have the privilege to make changes.

in Itunes 10.7.3 I get a message: error occurred while converting file. You do not have the privilege to make changes. This just started and I can not import my cds. Any thoughts?

Do you have read& write permissions to your iTunes library?
See this thread: Re: "Error has occurred... You do not have the privilege to make changes."

Won't convert files, unidentifiable error

Similar Messages

Maybe you are looking for