Won't detect the router.

Hi,
I am trying to install a WRT54G model router. It goes through the setup and all the lights and everything else is correct but when the software tries to detect the router it always says the is cannot detect it. I am able to access the router with 192.168.1.1 so the cables work, but i don' t know what to do at that stage. My computer is running XP if this is an issue. I have no experience with networks. This is my first time installing a router
Thanks

ISP?
•if you're running cable ISP go to MAC ADDRESS clone on the blue tab click enable and click clone your pc's mac - don't forget to save settings
•if you wanna personalize wireless settings go to wireless creat your own network name
•if you want a secured wireless network go to wireless security subtab on the blue bar - i suggest WEP encryption
•then last thing go to status tab and check if you have internet ip address , if yes power cycle modem and router for 1 minute check internet connection after
•if DSL who's the ISP? what's that brand of the modem?

Similar Messages

Setup won't detect the router

Every time i run setup(on both my PCs), it won't recognzie the router. I have all the cables hooked up correctly,and even my USB adapter on my other PC is on the network. The problem is that one cannot access the internet. The router i bought is legal,i purchased it at Wal-Mart. Can someone here help me?

As you are using USB adapter on VISTA Operating System…..try to download the updated drivers ( If available) on http://linksys.com/vista ….. remove the older drivers from programs & features in control panel….check if it works or not.

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. How do I fix?

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. This means I can't use the computer anymore. How do I fix? I tried using the Command+F2 keyboard shortcut, but it doesnt' work. It's possible that since I reinstalled the OS, it still needs to be set up, so there's only a welcome screen (but since I can't see it I'm not sure).

There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit

Computer won't detect WRT54G router

I got the WRT54G router. I plugged the router into the power source, then i plugged the the cable from the modem to the router, then the cable from the computer to the router. All four lights were lit. Then the computer would never detect the router. I tried plugging in and out, and the same problem. All the cable were in the right places. I'm guessing it has to do with my computer itself rather than the router. I have Windows XP

okay...first off check the physical connection, make sure that computer is connected directly to the no. 1 or no. 2 ethernet port of the router...click on start >> run >> cmd >> type ipconfig and hit enter, find out the IP address and try pinging to default gateway...if you are getting any replies, let me know the ISP details, so that i can tell you step by step configuration of the router...

WRT54GS Can not detect the router

We lost the internet connection a few days ago for a couple of hours and since then had to reset the modem and when I try to set up the router with the Easy Link Advisor I get can not detect the router. I am using the router to access the internet and it can't be detected???
I have powered it off enough times and then some and need to get this running to use the laptops.
I am running ver 7 firmware that it came with but I don't know what the exact version I am running or gor that matter where to find it.
Thanks

okay went through the firmware upgrade and installed it through 192.168.1.1 to admin tab and upgrade. it got to the reboot part and hung there for a bit, i hit continue or what ever it said and came back upwith a dns error and page unreachable. version installed is what i downloaded 7.50.5. i am still having the same problem, all the lights are lit that are suppossed to be lit, and i am on the internet and running through the router, and when i go into easylink advisor and start the setup process i have to go through the entire thing including selecting the router (which it should know what router it is) though removing the power cord and waiting and still told that it can not detect the router. i have no idea where to go from here. thanks!

I have a MacBookPro with Yosemite and Safari won't recognize the router after sleep unless I restart the computer.

I have a MacBookPro with Yosemite and Safari won't recognize the router after sleep unless I restart the computer.
OS X 10.10.1.
Safari Version 8.0 (10600.1.25.1)
WiFi router connects with mail but not Safari

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem

IPod no longer detect the router and can't connect to internet

Hey guys, i'm new in the community and thought that you may can help me with a lil' problem.
I bought my iPod one month ago and at first successfully connected to internet, then download the iOS 4.3 and continued working well for a few days 'till it just stop connecting to the web. I searched everywhere and found some things that helped but not solved my problem.
I have all my network data, the IP, Subnet Mask and DNS, the only one that does NOT work is the Router. I even tried putting the numbers myself by Static, but it didn't work.
Can somebody help me or tell me what da **** is goin' on?
By the way, my Internet service is Prodigy Infinitum ('cause i'm Mexican).
Thanks(:

Try:
- Resetting your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering off and then back on your router
- On the iPod reset netwokr settings: Settings>General>Reset>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

Why can't I sync my facebook invitations to my iCal? My Mac Mail won't detect the date/time on the email anymore.

I have been trying to sync my facebook invitations to my iCal and no longer able to do this through my Mac Mail. When I would receive a facebook invitaiton through my comcast email, I used to be able to hover my mouse over the date/time of the invitation and then I could easily "Add to iCal" or "See Date in iCal", but am no longer able to do so. I can still add other invitations, just not the facebook invitations. Any ideas?

You can get your photos off your phone. If they are all in Camera Roll just import them to your new computer (http://support.apple.com/kb/HT4083). If some of them were synced to your iphone from your computer (i.e., in photo library) just use an app like PhotoSync and send them to your new computer wirelessly. For that matter, you can sync your phone with your new computer without losing your data and settings if you carefully follow this guide: https://discussions.apple.com/docs/DOC-3141. Your only issue will be non-purchased music on your phone which is not in your new iTunes library, which will require 3rd party software such as Touch Copy to transfer from your phone to iTunes (or you will have to rip you CDs again to import them).

Migration won't detect the iMAC..

Hello,
I see a lot of people are having problems once they have selected the files to migrate however I'm not even getting that far. Any ideas as to where am going wrong? I have a Dell Laptop (XP SP 3) and I want to move everything onto my spanking new MacbookPro (purchased today). The Migration assistant in the laptop (which doesn't open automatically after it's been downloaded BTW) opens and says it's waiting for the connection to the Mac, the progress scrolls but it finds nothing.. The Mac however sees the comp and gives me a code but the laptop doesn't ever get that far... They're on the same network (otherwise the mac wouldn't even see the comp right? and I've tried putting an ethernet connection between the two but still no progress)...
So, what should I do? (no technical jargon please :-))
Very frustrated..
Thank you!

Please read and follow the directions in Lion Setup Assistant tips. Because you have already started the iMac and used it I would recommend starting from "Second chance...."
Also I'm guessing you may be new to OS X. If that is correct I would recommend book marking and using:
Switch 101
Mac 101
Find Out How Video tutorials
Finally remember you have 90 days of free telephone support from Apple using the complimentary AppleCare service. You can locate the phone number in your manual or you can use the AppleCare Contact Info link.

My iPhone displays as available in my PC, but my PC won't detect the photos on it. How can I fix this?

See title

A couple of other possibilities:
The CD is dirty / damaged / suffering from "CD Rot" - sometimes CDs may seem to play fine on a CD player (or using the CD-player function of a PC) but will not transfer correctly to a computer - this is the result of the way that CD players auto-correct the datastream from the CD where PCs, when reading the audio CD as data, do not.
Enabling the error correction function in iTunes import may alleviate if not fully resolve this
Use an alternate tool to extract the audio from the CD - Exact Audio Copy is probably the best out there, as it can be configured to attempt multiple reads of every audio sample on a CD to get a consistent result. Then import the resulting files into iTunes.
You don't say whether this is specific to one CD as in the original poster's case, but the "crackling" symptom has affected a significant number of users of the 64-bit version of iTunes 12.1.0.71 - these are mostly addressed in the most recent update (12.1.1.4), but if nothing else works it may be worth trying this alternative installer: iTunes 12.1.1 for Windows (64-bit — for older video cards)

Computer won't detect router

I have a wrt150N with windows xp and road runner internet. all the lights work but install cd and easy link setup won't detect the device. I can use Internet explorer to get onto the net but itunes and avant browser won't work. I changed my router address to 192.168.2.1 but it still won't detect the device. have tried the online chat without sucess. ready to throw this out the window. any help would be greatly appreciated.

Upgrading the Linksys Router's Firmware Question How do I upgrade the Linksys Router’s firmware?
Answer The new firmware adds numerous functions to the router. To setup a Linksys router with a DSL connection you need to perform four steps:
1. Downloading the Firmware
2. Upgrading the Router’s Firmware
3. Completing the Firmware Upgrade
4. Completing the Firmware Upgrade Process
Downloading the Firmware
Step 1:
Before downloading the firmware, make sure your computer has an active Internet connection. If your computer is plugged directly into the router and cannot get online, disconnect your router and plug your computer directly into your cable or DSL modem.
Step 2:
To go to the Linksys download page, click here and verify the model and version number of your Linksys product. For instructions, click the link How to find Model number.
Step 3:
After obtaining the model number of the Linksys router, enter the model number in the Enter Model Number field, then click GO.
Step 4:
Look for Locate Version Number and select the version of the Linksys product from the drop-down menu.
NOTE: In this example, we used WRT54G v.6. The Image may vary depending on the model number of the Linksys product.
Step 5:
After selecting the version, scroll down and look for Downloads For The WRT54G then click Firmware to get the latest firmware.
Step 6:
If you are using Windows XP Service Pack 2 (SP2) and Internet Explorer, you may see a “Pop-up blocked” message in your browser Information Bar. Click the bar and select Temporarily Allow Pop-ups and click Firmware again.
Step 7:
Click Save in the File Download dialog box that appears. Look for the Save As dialog box, choose a location for the file like the Desktop and click Save. When the download is complete, click Close, if prompted.
NOTE: The name of the file may vary depending on the firmware file of your router.
Step 8:
If the firmware file you have downloaded is on a zip format, double-click on the zip file and extract its contents to a single folder or to the Desktop.
NOTE: You will need to use a utility to open and extract files from the ZIP file archive. Popular software to use is WinZip®. To download WinZip®, visit http://www.winzip.com. You can also use the built-in unzipping features of Windows XP to unzip the contents from the archive.
Upgrading the Router’s Firmware
Step 1:
Access the router’s web-based setup page. For instructions, click here.
Step 2:
When the router’s web-based setup page appears, click Administration then Firmware Upgrade.
Step 3:
When the Upgrade Firmware opens, click Browse. Look for the .bin file which contains the files necessary to upgrade the router’s firmware.
NOTE: If the screen on your router’s web-based setup page looks different, click here.
Step 4:
Browse to the location where the firmware files were extracted and select the .bin file. When the file is selected, click Open.
Step 5:
Click .
Step 6:
When the upgrade is complete, the following message will appear.
Step 7:
Click .
Completing the Firmware Upgrade
Step 1:
Close Internet Explorer.
Step 2:
Reset the router. For instructions, click here.
Figure 1: Location of the Reset button of a Linksys BEFW11S4 router.
NOTE: If your router does not look like this, refer to the other images below:
Figure 2: Location of the Reset button of a Linksys WRT54GX router.
Figure 3: Location of the Reset button of a Linksys WRT54GC router.
NOTE: If the image of your router is different from the ones shown above, please consult your router documentation.
Completing the Firmware Upgrade Process
The firmware upgrade is now complete.
You can now use the router's Setup Wizard CD to configure your Internet service and set up your wireless connections.
Related Articles:
Checking the Linksys Router's Firmware
Setting-Up a Linksys Router with DSL Internet
Setting-Up a Linksys Router with Cable Internet
Setting-Up a Linksys Router with a Static IP Account
© 2006 Cisco Systems, Inc. All rights reserved.

My MBP won't detect a projector even when I reboot the system.

I can connect to a monitor, so I know the adapter and cable are working, and my old HP will connect to the projector so I know it's not the projector, but my MBP will not even detect that a projector is connected.. I have tried multiple projectors as well. I am using a VGA cable with the apple adapter. I have read old threads, but there doesn't seem to be anything recent, and it seems like people were able to find the projector after restarting the system. I have tried all of the various displays sizes and colors; I have tried connecting the cables in various orders as one person said this worked for them, I have tried turning off the computer first, then connecting everything, I have tried connecting everything then restarting, but my computer just won't detect the projector(s). Any thoughts?

You can ignore those instructions. Adobe has what I believe is an easier way to install Flash by using the manual installers. See the Adobe troubleshooting guide - http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

My computer won 't recognize the airport extreme base

I have an imac connected to the airpot extreme base and works fine, but both my powerbook and ibook won't detect the airport extreme base. I used to have an airport express and all three computers co-existed in harmony.
I've tried every setting and still the base goes undetected. The only way that the powerbook can detect the base is by going through the router, but can't go wireless. What am I doing wrong?

BarbQ, Welcome to the discussion area!
Try configuring the AirPort Extreme base station (AEBS) so that it is using a channel between 1 and 11.
Configure the AEBS so that the SSID (network name) IS broadcast.
As ALpianoman suggested, ensure that the AEBS is configured to work at 2.4 GHz and in an 802.11g compatible mode.

Computer won't detect audigy

Greetings all:
I looked for a while in the forum, but did not find this question, so here goes:
I purchased an audigy 2zs platinum 0 months ago and had no problems until a month ago when I had to reformat and reinstall windows (one of my sata raid dri'ves died/fried). The windows install was on a new dri've, so there are no residual drivers from the previous install (to my knowledge - but I have tried to install it a few times now). Now windows xp home will not detect the audigy 2zs at all. It does detect the midi/game port on the card. I have also been able to use the firewire port on the card. It just won't detect the card, and I have had to revert to the onboard sound. It will only recognize the card as a "pci audi device" and not as a "audigy 2zs" like it did when I first bought it.
I like the zs, plus the front i/o bay is handy. Any thoughts on this problem? I have already tried a different pci slot with the same result. Is there a way to force the driver install? Is there a residual driver I am missing? Could the card be fried?
Here is my setup:
p4(478) 2.8 ghz, asus p4p800 dlx, ati aiw 9800 pro, audigy 2zs platinum, old-fashioned ide ata hd for now.
Thanks, Christopher

I think you may have misunderstood. If you do it that way and navigate to the windows CD then yes, it will install the windows driver. But i meant the Creative CD. If you install the basic CREATIVE card driver you should then be able to install all the other software. But the basic driver should sound no different than with the software except that the software allows you to EQ it and such.
Your problem as i understand is that windows DOES recognise there is a device there, but doesn't know where the driver is. So you need to manually navigate to the basic driver on the CD and once thats installed use the CD to install the software.
Also, i don't see why you can't just uninstall the unknown device in device manager, then without rebooting install from the creative CD as you normally would. In other words, the reason trying to install from the CD as normal isn't working right now is because of the unknown device in device manager. Some kind of conflict between that and windows knowing what to do with the CD install when you try that. So uninstalling the device first then doing a normal instal may also work.

Itunes won't detect ipod...

Hey all. I previously installed my ipod on my computer with all the software and it was working fine. It was working perfectly. I decided to return it to get a smaller version, but before I did that, I had to restore the factory settings. I later decided to keep the current ipod, but now itunes won't detect the ipod. I tried reinstalling the software numerous times and it didn't work. I also plugged it into a different usb port like the manual suggests but it still doesn't work. Can anyone please help? thanks.

i love you whoever posted the thread in this link!!!!!!http://discussions.apple.com/thread.jspa?threadID=299830&tstart=90

Won't detect the router.

Similar Messages

Maybe you are looking for