Won't display graphics, only text

need some help here. safari will only display text no graphics? i cleared the cache, that didn't help. i emptied cookies, that didn't help. i reset safari, that didn't help. all the trouble started after i upgraded to 10.4.5 any help would be great. it doesn't matter what webpage i view it's all the same.
Al Powerbook & iBook G3 500

yuri2k,
Welcome to Apple Discussions.
Since you are new to Discussions you are not aware that you are according to the "Terms of Use," Threadjacking:
Threadjack-To wrongly post a dissimilar issue in an existing discussion, distracting from the true focus of the discussion. If your issue has any significant difference from a similar topic, then you're probably better off posting a new topic to focus attention on your particular issue.
I would not personally use "wrongly," but your question will get the response it deserves without detracting from the original posters question, if you start your own thread.
In this case, I do not know the answer, and since another user on the same network appears to not to have the problem, I suspect that it may be related to "Proxie setting."
Good Luck
;~)

Similar Messages

Itunes doesn't display graphics, only text, has anyone seen this?

Just loaded iTunes 10.5 on Windows...only TEXT is displayed...has anyone seen this?

I have this exact problem, and it occurs on every device I own: iMac, Macbook, iPad, Win 7. The explanation for the issue is that the stylesheet isn't coming over (.CSS).
Because it occurs on every device in my house, I'm assuming there's something in my wireless router configuration that's causing it. I haven't found the issue yet, but I'm digging through my modem configuration to see.
go to either http://192.168.0.1 or http://192.168.1.1
That's your modem's IP address. If you can figure out what's in the configuration that's causing it, please post back.

Safari won't display graphics for some web sites

There are some sites that Safari won't display all of the graphics. For instance, nissanusa.com opens to a blank page with a little "feedback" symbol in the lower right corner. Similarly, the infiniti.com page has some text but no graphics. Both pages open fine on Firefox. There are other pages, but I prefer not to have to switch back and forth between browsers. Am I missing a plug-in that I don't know about?
Phil

Sorry, Guys. Somehow I screwed up when I installed the new Safari with Leopard. I don't remember accessing the preferences for Safari and thought they remained the same as for Safari 2. However, upon checking, I discovered the "enable plug-ins" box unchecked. Checking it solved all of the web site problems.
Peter, Thanks for your response. For informational purposes, on Safari 3, the "enable Flash" button is no longer hidden in the Mime settings tab. Now it's on right on the advanced page of the Quicktime preferences.
Again, sorry for my screw up and thanks for your help!
Phil

Browser won't print website graphics - only text

Does anyone know how to print up web pages so that the graphics on that page will show up and not just the text? I have tried printing with both Firefox and Safari and both refuse to print the graphics. I have a new Epson Color Printer.
Any advice, suggestions would be great.
Thanks.
Patrice

Neither Firefox or Safari have a setting that stops the images on a site from being printed. Therefore there must be a setting with your printer driver that is causing the incorrect output.
As a test, choose to print but from the print dialog, select PDF and save the file. If this PDF has the images, then you know its something to do with the Epson driver.
PaHu
Sorry BD. Looks like we replied at the same time. At least we had the same idea..
Message was edited by: PAHU

Printer won't print pictures, only text

I have an MX452 All-In-One printer. I don't do a lot of printing, and most of what I do is text. Today I tried printing a picture, and everytime I try I get a message stating that the printer is offline. The printer is NOT offline -- I know this because it prints text just fine, even while the "offline" message from the picture is still displayed.
I am going to pick up some ink later today, as the black is a little low, but surely if this were the problem, I wouldn't be getting an offline message...right?
I am using Windows Vista and printing directly from the computer (not from a website), if that's any help.
Thanks for any advice you can offer.

Hi MarkFL,
Since you are able to print text from other programs on your computer, it may be possible that another printer is selected in the Print window of the program that you are printing the pictures from. Please open that program, then go to FILE and select the PRINT option. Please ensure that the printer selected in the window is the PIXMA MX452; if it is, also verify that there is only one PIXMA MX452 printer to choose from in the list. If there is more than one, please try to print by selecting each one. Once the correct printer is selected, please remove the other printers.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My phone won't display contacts only their numbers

My phone isn't displaying contacts names, when I get text or calls only numbers

Thank you, its always something simple

Canvas won't display video, only see black w/ audio

I cannot get the timeline to display video. This happens randomly when insert new clips into the timeline or change the length of current clips in the timeline. I'm working w/ .mp4 video and about half of the footage is SD, but I'm working on an 1080p timeline since I will have 1080p footage. Any thoughts? I'm working w/ a discrete graphics chip so I don't think this is the problem. The canvas works great on my other projects, it's just this one project. I'm lead to believe its the SD, but Ive tried switch the project to an SD timeline and it didn't solve the problem.

Tom,
Thanks for the reply. Graphics card is NVIDIA GeForce GT 330M 512 MB and was listed on the link provided.
The specific information on the clips are this:
And the project properties are:
Side Note: I can solve the issue if I cut and re-paste the entire project in the timeline. Slightly annoying, but will last unitl I change other clips

HTML links won't display in Dynamic Text Field

I am loading external text files in dynamic text fields on my
webage. These texts contain html links (<a href="page.html"
target="_blank">Click Here</a> and I have "render as HTML"
on and "selectable" off in my dynamic text field. Also, I am
loading a CSS file. Not only do I not have a hand cursor, but I do
not even have any of the text from that piece of html code down.
What is going on with this? Please respond asap, as I have been
struggling with this for a day now. Here is the Actionscript for
loading the CSS:
var flash_css = new TextField.StyleSheet();
flash_css.load("styles.css");
flash_css.onLoad = function(success:Boolean) {
if (success) {
zloc_txt.styleSheet = flash_css;
} else {
trace("Error loading CSS file.");
var zloc_lv:LoadVars = new LoadVars();
zloc_lv.load("zloc.txt");
zloc_lv.onLoad = function(success:Boolean) {
if (success) {
zloc_txt.text = this.content;
} else {
trace("unable to load text file.");
zloc_txt.html = true;
zloc_txt.editable = false;
_global.styles.TextArea.setStyle("backgroundColor" ,
"transparent");
_global.styles.TextArea.setStyle("border styles" , "solid");
Here is a sample of the text file code:
&content=<span class="headline">Northwest Arkansas
Locations</span>
121 Main St.
Russellville, AK 77801
(626) 111-1111<br />
<html><a href="
http://www.mapquest.com"
target="_blank">Click Here for Driving
Directions</a></html><br />
Thanks for the help,
Chuck

The error is here:
zloc_txt.text = this.content;
Even if you rendered the textfield as HTML, you still need to
tell flash that the variable you are inserting is HTML. Therefore
you need to use the htmlText property.
zloc_txt.htmlText = this.content;

Template page won't display on the web.

One of my web pages was saved as a template and won't display graphics when uploaded, just code. It has the extension dwt. I thought probably what I should do is make
an html page copy and use that. I don't know how that is done, or if that would be the best solution. Any help would be appreciated.

You should never publish your Template.dwt file to the web except to have as a backup in case your Template ever becomes corrupted or lost.
Templates are a proprietary DW file type used to create the rest of your site pages. Go to File > New Page from Template. Select your .dwt file and hit create. The resulting new page is a child page based on that main template. Save as index.html (your home page). Repeat with other site pages.
Add editable content to each of your child pages. Everything outside Editable Regions in the template will be populated to all child pages -- very handy for site wide menus, headers, footers and sidebars.
When you edit a template, you must re-publish all child pages based on that template to your server.
For more details on the use of DW Templates, use F1 Help in DW.
Nancy O.

Safari 7 not displaying graphics

I loaded Mavericks a few days ago and have nothing but problems with Safari; it won't display graphics, and as another problem (probably unrelated) won't download help files.

Just found the problem - had inadvertently checked the Disable Images in Develop tab

Layered text and graphic in Word won't display when converted to PDF

I have several simple shapes with text layered in front in my Word document. After they are converted to PDF using Acrobat XI, only the shape will display. I can tell the text is still there, because I can use my cursor tool to select it, but it won't display visually. It looks like it isn't there but it really is. One bit of text is even an internal link, and the link still works but I can't see the text I'm clicking on.
If anyone has any suggestions I'd appreciate it.
Thank you,

Hi Lori - this was perfect! It was an issue with the layers being misordered. I used the Edit Text & Images tool listed under Tools > Content Editing, found the layers, then by right-clicking I was able to bring the text to the front and it all looks great now.
I would like to know why this happened, or if not why, how I could make sure it doesn't happen again. If there's a check box or other setting I could use to remove this problem that would be fantastic.
Thank you so much for pointing me in the right direction!
-Scott

Dynamic text won't display

I don't know if this is a bug. I have a movie that contains a
dynamic text. When I run it, the text displays fine. But when the
said movie is run through another movie clip (using loadMovie), the
dynamic text won't display. Any ideas why? Thank you.

dongzky wrote:
> Actually, there was no code involved. The dynamic text,
with borders around it,
> I tried to put a value for testing. It works fine when
run. But when called
> by another movie clip, although the movie with the
dynamic text still loads,
> the text won't display anymore. Even the borders were
gone.
Than again, it's a bug on your end :)
Dynamic text is a text container, it's to be use with
dynamically given data, from
source file or variable string on timeline. It's not meant to
be for regular text
display. You need to use Static text. The fact that you can
see it it's just flash
being tolerant but it only lasts for as long as the movie is
getting more complex.
You can get away with somethings even tho you should not be
using them, does not
mean they will work all the way. Dynamic text, as said above
is for text that comes
to flash from outside source and this is when it works best.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

My iPhone 5 won't display smart text options.

My iPhone 5 won't display smart text. It did when I initially downloaded the new OS, now those options don't appear at all. Did I click something to make them disappear?
I went into Settings to see if there was a component of it within Messages. I don't see anything.
Thoughts please.....
Thanks much
Ginger

Awwww......that's it....the dash! I tapped it. Tried to drag it up/down and it didn't move. Now I swiped and it's back!
So I need to remember to drag up/down and now swipe.....
Thanks much!
Ginger

Why are most websites only displaying code like text?

Almost all of the web sites that I frequent have began displaying code like text on a blank white background. Some sites still have hyperlinks and images here and there with random text, but others are fully blank with what appears to be the code of the website showing. I wasn't able to access this web site until I tried multiple times and it magically worked, but others are still not working. The only sites that I have tested that have worked from the start are Google related sites (Gmail, Google, Youtube). My yahoo email is inaccessible, which is an important email for me and all other sites that i frequent are inaccessible. One major thing to note is that the sites are also inaccessible on Internet Explorer. This would typically lead you to believe that the problem lies with your connection in some way. I have reset my router/modem and it had no effect. I also have ran CCleaner and have deleted temp files, cookies, and caches. I have tried running Mozilla in safe mode with add-ons disabled as well. My malware protection and antivirus protection find no issues after completing full scans. One last thing to note is that, on both Firefox and IE, certain sites allow to me to access the homepage, such as yahoo, but once I attempt to check my mail the random display of code appears. On IE it simply says that the site cannot be displayed once I click to check my mail. Gmail works perfect on the other hand. The only things that I have done during this time are:
Setup a LogMeIn account (Hamachi) and connected my PC to their service
Downloaded and began using Malewarebytes software to remove malware that I had picked up
Other than those two things it has been the same usual actions on my PC. Could the malware that I had still be effecting me somehow even though it was found/deleted? Is my router to blame even though resetting it does not help? After all the things I have tried, what could it be?

What is the content type of those pages if you check that via Tools > Page Info > General?
Is that text/html as it should be or text/plain as your screenshot would suggest?
You can also check the Net log via the Web Console (Web Developer > Web Console;Ctrl+Shift+K)
*https://developer.mozilla.org/en/Tools/Web_Console
*https://developer.mozilla.org/en/Using_the_Web_Console
This can be a problem with your firewall that modifies the server response headers if the settings in Firefox are correct.
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox
*https://support.mozilla.org/kb/Basic+Troubleshooting
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that works.

Firefox page images do not display only text and links

New desktop (not this one) with windows 8.1 Pro, Firefox 29, Norton Internet security. When I go to many of the Firefox pages images do not display, only text and links. This is true for the "get add-ons" page. I can search for add-ons, but when I try to install one, the installation fails. Is there a security setting in windows or NIS that is blocking Firefox images and installations? The Firefox installation went smoothly without error. Other sites do not have this problem.

Wow! I never would have thought of that! My time settings were incorrect when I set up the PC, and I thought I set them. I did have the day, date, and time set correctly. But I did not have AM/PM set right. So, I was off by 12 hours. I corrected it and, voila, all works well.
I'm so happy now, because I can now get all the security extensions I've grown to love:
- NoScript
- Ghostery
- Better Privacy
- Adblock Plus
You guys are great! Thank you so much for your help.

Won't display graphics, only text

Similar Messages

Maybe you are looking for