Won't display thumbnail images in Facebook. I tried fixes, no help.

When I open Facebook all is okay. When I go to "photos" all the thumbnails are blank. I can open them one at a time but the images are filled with black squares. I've tried going to "tools, options, content, etc" several times but no help.

Neither of these "fixes" has changed anything. I also cleared my cache, ran a diagnostic check, and a virus/trojan scan! Either way, firefox 4 is just not working up to my needs! Should, or can I go back to 3.6?

Similar Messages

Safari won't display thumbnail images

Hello everyone. I have encountered a small issue about thumnail images in Safari. At first I thought this is an issue of a specific website but I figured out that it's an issue with my Safari browser. So, as you can see the top screenshot is from Safari which doesn't show thumbnail images and the bottom one is from Chrome which shows thumbnails perfectly. I love to use Safari as my default web browser and I have no plan to change to another web browser. So, is there anyone who can help me address this issue? Thank you in advance!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ $\2$/;H;};/Apple|Genesy|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(awk '/^D/{print $2; exit}' "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=\* || e=; echo $d ${f%_$d*} ${f##*.} "$e"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|Thrott|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test will take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I cannot display google image/sometimes facebook image too using safari 6

I cannot display google image/sometimes facebook image too using safari 6. please help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

JPG won't display in Image box.

Trying to add a logo in JPG format to the top of the form using the Image control, but it won't display the image nor print it. If I use a GIF file it works fine, but looks horrible. I'm new at this, any ideas?

I finally figured it out after posting another frustrating comment to this thread. I can't take the credit, however, as it was quickly solved by Irv Kanode in another thread. I have copied his exact post below. It solved this issue in seconds:
ADOBE SUPPORT REPLY:
Irv Kanode - 4:15pm May 5, 06 PST (#1 of 2)
Check some of your JPEGs for CMYK vs RGB.
Might the ones that fail be CMYK and the ones that work be RGB?
When images don't work are you seeing a broken image icon or...?
Irv
Adobe Support
USER FOLLOWUP TO ADOBE SUPPORT SUGGESTION:
Kurt Wedberg - 5:27pm May 5, 06 PST (#2 of 2)
Irv,
Thanks for the reply. The images that didn't work were CMYK. When I converted to RGB they worked.
The images that didn't work were coming up with random grey scale colors.
Thanks again,
Kurt
Hope this helps everyone!

Photoshop won't open Raw images with my new Camera Canon 6D help! I use Photoshop CS5 extended version.

Hello,
I got a new camera and Photoshop and Lightroom won't open Raw images with my new Camera Canon 6D help! I use Photoshop CS5 extended version. and Lightroom 3

Good news and bad news:
The bad news is that you need CS6 or higher to open 6D RAWs. (The 6D didn't get support until Camera Raw 7.3; 7.0 premiered in CS6.) You can choose to upgrade (I'd recommend skipping CS6 and go straight for CC 2014 for $10/month) *OR*...
...the good news is that the DNG Converter can help you convert your RAWs into DNGs for use in CS5 and Lightroom 3.

My Windows7 computer won't recognize my iPhone4. I've tried all the help tactics.... HELP!

My Windows7 computer won't recognize my iPhone4. I've tried all the help tactics.... HELP!

When you say you have tried all the help tactics I assume you have tried all the things mentioned here
http://support.apple.com/kb/TS1538

Bridge CS3 won't display thumbnails and locks up

Running a Mac G5 Dual 2gHz processors with OS 10.4.11 and 4GB ram...
I started today working with images on an internal drive and all was well until I selected an older external drive. Bridge vers. 2.0.0.975 would not display thumbnails on the older drives and stopped functioning altogether when selecting a different folder or any menu item.
Reinstalled Photoshop and Bridge and folders/thumbs from internal drive still displayed just fine, but still would not display on external drives. Ever since I tried holding down the option key when restarting Bridge, the the problem has spread to the internal drive and now those images will not display.
And yes, I did try upgrading to Bridge 2.1.1.9, but that update never worked at all for me.
I gotta vent here. Bridge CS3 has been a consistent headache from the first day of purchase. Since Bridge CS3 has never worked properly, how can I justify the purchase of Photoshop CS4 upgrade?

Hey Jim
Good it worked, seem to remember that there have been problems with some users and the auto update feature from Adobe?
Whenever I used Bridge CS3 for a week or 6 to 8 (I also work with it a lot and and also large amount of files) trouble was coming up and I just delete the plist and cache file and restarted with option to refresh prefs. I don't use the cache for archive purpose and usual work with one main folder. After finished I move the files to specific folders without caching those so after deleting cache I only need to recache a few folders and was able to work flawlessly for a certain period.
I must say that Bridge CS4 is more stable and is working also very nice and again better compared to the prior version.
For system maintenance I use Disk Warrior every now and then but Cocktail on a daily basis, scheduled automatically after an also time scheduled auto start up of system and some apps. Cocktail is cheap and easy, :-)
see also: http://www.maintain.se/cocktail/index.php

Displaying thumbnail images in another panel when it mouse clicked

hi,
I am using JAI, what i am trying to do is i am decoding the tiff file and creating thumbnail of that images and adding thumbnail images to one panel and enlarged images to another panel using DisplayJAI. Now when i will click i thumbnail images on left panel then that image should be display to another panel on right side. Adding both panel to JSplit panel.
I have no idia how to do it, i tried to do in different way but not able to do that. I hope anybody can give me the hints about this.
Thanks

i am adding thumbnail of all images in left panel and enlarged view of each thumbnail is added in right panel , and what i require that when i click thumbnail in left side it's corresponding enlarged image should be visible, suppose in right panel page no. 1 is visible and when i click thumbnail of 13 page in left panel that should be in viewport of right panel.You should put your right panel inside a JScrollPane and call [scrollRectToVisible() |http://java.sun.com/javase/6/docs/api/javax/swing/JComponent.html#scrollRectToVisible(java.awt.Rectangle)] from your panel. You can put the rectangles corresponding to enlarged images in a hash map with the keys being some unique attribute of your thumbnails in left panel. That will help in getting the rectangle to make visible, real fast. Or, you can just put the rectangles in some array indexed according to the thumbnails in left panel.
I also want to hide the left panel, i think it's possible by Frame.Yes it is possible, but you said you have both your panels in a split pane, so maybe you can use its setDividerLocation() function to hide your left panel.
Thanks!

Displaying thumbnail images inline with a report

Hi,
I have a table with data and one column which is a text image filename. This image file resides on another server. I currently have a cgi that takes the image filename as a parameter and returns the image be viewed in a browser. I've been able to create a report where the image file name was a hyperlink that opens the image in the browser. I've also been able to create a static html page that can display the image inline with the APEX page, but the html is hardcoded.
My desire is to have the thumbnail appear inline with the report in its own column. Is this possible? I've seen it in some demos, but the images were stored in the database or the database servers filesystem.

Yes, it is possible.
I did just that.
Here what I did
SQL> desc dept
Name Null? Type
DEPTNO NOT NULL NUMBER(2)
DNAME VARCHAR2(14)
LOC VARCHAR2(13)
PICS VARCHAR2(20)
PICS hold the file name of the image, I name my thumbnail and the picture with the same name but store in different directories under HTTPHOME/images, name pics and thumbail
I created an interactive report in APEX
select
"DEPTNO",
"DNAME",
"LOC",
'<img src="#IMAGE_PREFIX#thumbnail/'||"PICS"||'" border="0">' AS PIC_LINK
from "DEPT"
In the interactive report attribute, I set the "DISPLAY TEXT AS" for PIC_LINK as "Standard Report Column"
If you are using XDB, you need to re-copy you images(This part I don't like) to database every time you change/add/delete an image.
If you are using HTTP server, then that it is.
I am looking for a way to dynamically show the thumbnail with providing an image file in APEX. So,that I don't have to use 2 files
--John

Never saw Safari doing this before! Won't display some images !!! *** ??

So I am using Safari for quite some time. All of a sudden, in the middle of the day, Safari won't display all the images on any given web page. For example, I go to flickr.com and see that half the photos on the page wont load. The status indicator says that Safari is done trying to load the page, yet half it is empty. Resetting, and then restarting Safari does nothing to help the situation.
I really want to like Safari but am bewildered by all the problems it has (massive memory leaks, CPU runs at 100% every other day).
But not showing photos is too much!
See this > http://farm4.static.flickr.com/3026/24292326189cfa374007o.jpg
Message was edited by: iAyan

I, myself am not crazy about Firefox, because it's a resource hog. Safari on the other side is simple, neat and clean. I have uninstalled the Apple Updater that gets installed with the Safari installation and that ensures that Safari doesn't give me any hassles.
It is just this image problem that I am experiencing at the moment. I really hope that someone can resolve this before the final release of Firefox 3.

Create a page to display thumbnail images

I would like to create a Gallery Page on our web site to
display lots of images of our sports club members doing sport.
Ideally it would be lots of thumbnails which can be selected
to view in a larger box on the page.
Can anyone give me an idiot's guide to doing this. I don't
use CSS, just HTML and images (jpg usually)
thanks in advance
frankieirishman

In addition to the above-mentioned batch process, it might
also be a good idea to protect your images with a watermark,
especially if you plan to display your images in a private website
gallery.
This is easily accomplished in Fireworks -
check
out this tutorial. It shows you how to teach Fireworks to
automatically scale down your images and apply a watermark on them,
using only your Fireworks History panel.

IPhoto won't display thumbnails

I performed a clean install of OS X, and when I copied over the pictures I had backed up iPhoto wouldn't display thumbnails. Old photos have no thumbnails at all, new photos will show thumbnails if I scroll around quickly, but return to blanks if I stop. If I edit a picture, the thumbnail will show until I quit iPhoto. I've tried rebuilding the library and thumbnails.
I have have a MacBook Pro from late 2009, iPhoto '09 version 8.1.2 (424).

How did you bring back the pictures after the clean install? Did you use Migration Assistant in the restoring of your files? If so know that MA has a history of not handling iPhoto library very well. So if you did use MA see if you can do a manual copy of the backup library to the Pictures folder on your Mac. Then launch iPhoto and go from there.
If you didn't use MA then try the following: make a temporary, duplicate copy of your library and apply the three fixes in order as necessary.
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
2 - delete iPhoto's cache file,, Cache.dbt, that is located in your Home/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
If that doesn't help try the following: make a temporary, duplicate copy of the library and try the two fixes below in order as needed:
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library.
Select the options identified in the screenshot.
Fix #3
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

IDVD won't create thumbnail images in slide shows

In a slide show, the window that used to show the photos in a slide show no longer renders thumbnails in the list or grid views. The status at the top of the window just sits there and spins forever, with the text "Creating thumbnail images...." Anyone know of a workaround?

Neither of these "fixes" has changed anything. I also cleared my cache, ran a diagnostic check, and a virus/trojan scan! Either way, firefox 4 is just not working up to my needs! Should, or can I go back to 3.6?

Column View won't display some images downloaded by browser

I have used the "Preview" in Column View to display images for some time and some images downloaded to folders will never display. The wheel just spins in the display area and CMD-i doesn't display the image either. If I open the image in the Preview application it displays! There is no detectable difference in the files that do and don't display in Col. View. I can get any image to show up by opening a graphic application and doing a "Save As" to reprocess the image and replace the balky one. But, this is not right that I should have to do this. I cannot determine whether a downloded image is going to have a problem or not as some from the same websites are OK sometimes and some are not. I had the problem with OS 10.2.8 too. Changing from iCab to Safari does not help.

ACK!!!! Cancel all that because it happens using Firefox too. I have NO IDEA what in the world is happening to my system that would cause web pages to load incompletely.
What a drag.

Looking for best way to display thumbnail images

i am new to dreamweaver. I can get my thumbnail images to
open, but I want them to open in a new window and preferably one
that is sized according to the picture. how do i do that?

James Shook wrote:
> I just haven't seen any sites lately
> that use pop-ups specifically requested by the viewer.
Really? I see them all the time. Random examples I just found
now:
https://www.econsumer.equifax.com/otc/showmyequifax.ehtml :
click on the
"Terms of Use" link at bottom of page.
http://www.portlandonline.com/
: click the "Disclaimer & Privacy Policy"
link at very bottom of page.
http://naturemade.com/UserAccount/uar_reward.asp?tab=Rewards
: click on
the "Forgot your password?" link next to Go button.
and my own
http://sethshulman.com/seth_shulman_bio.php
: you'll see
icons indicating which links will open in a new window.
http://www.platinummtb.com/team.htm
: click on the team image.
I think popup windows are in fact used quite frequently,
often to good
effect.
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Won't display thumbnail images in Facebook. I tried fixes, no help.

Similar Messages

Maybe you are looking for