Won"t download on hp notebook windows starter 7

i have windows starter 7 on hp notebook. can't get firefix to download.

Please provide the exact messages you get; "something like" doesn't give us any useful information.

Similar Messages

  • Movie Won't Download - No Error Message - Just Starts Telling Me It'll Be 1000s of Hours

    I actually have this same issue from my iPhone. I didn't know until tonight. After several fruitless emails to Apple support, I removed all my pictures and videos on my iPhone to make room for the movie I bought and after downloading 4.8mb the issue started there too. Here's the initial issue:
    I am running Itunes on my PC Windows XP Home Edition version 2002, running service pac 3. It's a Dell Inspiron 1011, Intel Atom, CPU N270 @1.60Ghz, 0.99 GB of Ram. I have broadband internet with a download speed (according to speedtest.net) of 6.11mbps.
    I purchased The Hobbit: The Desolation of Smaug in SD one night before bed and in the morning (roughly 8 hours later), it had completely downloaded the extras, but the movie itself only downloaded 250kb and told me it had 261 hours remaining to download. However after watching it for a minute or so, one moment it told me it had 50 hrs to go then as many as 600, when I checked a few minutes later, it said 126 hrs remaining and went as high as 64,000 hrs remaining. I'd really love to be able to watch this movie in iTunes on one of my devices. I have another $30 on account that I'd love to use.
    Assistance would be greatly appreciated,
    Geno Allen

    Thanks again - I've had limited success with this.
    Erasing the iPod disk (which, for any other luddites who worry like me, does not delete the OS - just the music data) meant that iTunes could finally find the iPod and restore it. It started syncing and all appeared well...
    ...until, that is, the sync finishes and you hit disconnect. The iPod ejects from iTunes, and shows the 'OK to disconnect' screen with the usual white progress bar.
    When the disconnect progress bar is full, the iPod resets itself, and afterwards has no accessible content on it (0KB free under 'settings'). Which is odd, as when you reconnect it iTunes it syncs OK, as if nothing were wrong (the capacity and disk usage is shown correctly).
    I've tried restoring again since and the pattern happens routinely. It doesn't matter if it's left plugged in during the 'ok to disconnect' screen or unplugged - it resets itself all the same.
    I suspect this is heading towards 'terminal' status but am all ears if there are any other potential solutions!
    Nick

  • Iphone won't download all photos into window photo gallery, downloads old random photos for some reason.

    Hi my iphone has just started to not download the most recent photos but photos from months ago each time in a random order. I cannot down load my most recent photos but can e-mail them. I am using Windows photo gallery or Picture Motion Browser. Any ideas would be great...

    Try to delete the photo cache, described here: http://support.apple.com/kb/TS1314

  • ICloud won't download whole msg to Windows Live Mail 2011 program if pdf attached

    I just posted a message about this but think I posted it in the wrong section, so, am posting again here. Has anyone had this problem? The email arrives in Windows Live Mail 2011 program with the pdf attached but what the sender typed to me in the email is missing.
    This email was generated originally by a mac user who sent it to another mac user with a pdf attached. The second mac user sent it to me  after typing a couple of words asking me to do something with the pdf. I never saw what he typed in - it was hidden. If I clicked Forwardd, then the draft of the forward showed some of his message to me but it was in weird format (lines broken in half, letters missing).  If I clicked Reply, I could not type into the reply.
    I checked iCloud mail. The message was there in the iCloud incoming mail folder, intact, everything visible. So the problem occurs when the IMAP server goes to send the mail on to my computer's email program.  Junk filters are turned off both on the IMAP server and in my email program so that is not part of the problem.
    One thing that occurred to me is that Windows Live Mail 2011 is receiving the email with pdf attached as though the text in the email were a photo or image.
    Has anyone encountered this? Can anyone guess what is wrong? Does anyone know how to fix it?
    I am using an HP Pavilion Laptop with Windows 7 home premium 64 bit.
    Kelliann

    Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
    -- cj

  • FP won't download on PC with Windows 7

    I have tried everything and followed all instructions on support page but nothing is working.  Message says it can't download.  Once I did manage to download but it wouldn't install - said something about not having a file extension.
    Any ideas????????????

    Please provide the exact messages you get; "something like" doesn't give us any useful information.

  • HELP I purchased an album with 2 songs and it won't download

    Help! I purchased an album with 2 songs and it won't download.I have a Windows XP.When i try to download it I get this message:
    There was a problem downloading"the songs i Tryed to download".An unknown error occurred(-50).
    Please check that the connection to the network is active and try again.
    If you know the solution PLEASE help me.

    This link should help, it really applies to any firewall you may use besides McAfee.
    http://docs.info.apple.com/article.html?artnum=93447

  • Computer won't successfully start - stuck at "Login Window Starting"

    Hello, I'm having a problem and would appreciate any help. I recently was trying to uninstall QT 7.4.5 and revert to earlier vers bc 7.3.5 was adversely affecting an app I use. I was unsuccessful so eventually I just reinstalled 7.4.5.
    However, now my computer won't start successfully. The screen gets stuck with a 99% full progress bar and the message "Login Window Starting". It stays at that status indefinitely.
    Any ideas as to how I can get to my desktop? Any help is much appreciated!!!!!

    I would reinstall OS X. If the hard drive is OK you can do this:
    How to Perform an Archive and Install
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • New ipod, started up with Mac but want to download from music from windows?

    Ok, so I got my new 5th gen ipod and started it up with my Mac. However all my music is on my old laptop..windows. Is it possible without restoring the ipod to download my music from windows? By the way I am hopeless and my Mac is 2nd hand so I am not sure if it is MacOS9.2.x. Not that that makes a difference, just so you know. Or will I have to put all my music onto my MAC? Please advise

    Probably the easiest way to use an iPod on both Mac and Windows computers is to format the iPod (using iPod Updater) using the PC. This will force your iPod to use the Windows file system (FAT32) which both the Mac and PC can read from and write to without the help of additional software. Of course then all your software updates for the iPod will have to be done on Windows.

If you need to use a Mac (HFS+) formatted iPod on a Windows PC, you'll need to install some 3rd party software such as XPlay 2.0 (which you can get from MediaFour Software). This will enable your Windows PC to read a Mac-formatted iPod.

  • I will now buy and download adobe Photoshop for windows, but soon I am going to buy a mac. Will I be able to download my Photoshop CC on the new Notebook?

    I will now buy and download adobe Photoshop for windows, but soon I am going to buy a mac. Will I be able to download my Photoshop CC on the new Notebook?

    A creative Cloud membership provides you with the ability to have installations on different platforms, Windows and Mac.  And since you are allowed to have two working installations, you can have one of each.

  • I am trying to download Itunes onto my windows 7 pc and its say that, "Verify that you have sufficient privileges to start system services."

    I am trying to download Itunes onto my windows 7 pc and its say that, "Verify that you have sufficient privileges to start system services." So what do I do because thats all it says and then it gives me three options I can: abort, try again or Ignore. I have tried all three and I still can't download Itunes, so help please!

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Some pdf & doc won't download... tried fixes under 'FF keeps opening many tabs or windows' but none worked... these files open in Safari & Google Chrome.

    Some pdf & doc files won't download. The "You Have Chosen to Open" pop-up appears but when I hit 'Save File", it goes away and the file is not saved. The corrupted files show up in mac download file as .part but don't show up in ff download file. Tried suggestions in "Firefox keeps opening many tabs or windows" on this website but none worked.

    This is most likely Firefox's new "built in" PDF Viewer giving you the trouble.
    First, in Firefox, type "about:config" (minus the quotes) in the address bar. This will open the Firefox configuration file. You'll see a warning. Click that you'll be careful, and open the configurer.
    At the top there is a search bar. Type "js" (again, minus the quotes).
    In the list of results you'll see pdfjsdisabled with a value of "false". Right click it and select Toggle to make it read "true".
    Click Firefox>Preferences and under the Applications tab, scroll down to Adobe Acrobat Document. Click the drop down on the right side and choose "Use Adobe Reader (default)".
    That should take care of it for you.

  • Firefox 3.6.15 won't download (Windows 7)

    Firefox 3.6.15 won't download in Windows7. The download window just runs, don't even connect with the server

    HELP!

  • I have windows 64 and trying to download itunes 10.5, it start downloading but then after it`s almos finish i have a window pup up with error Microsoft ft VC80.CRT,type="win32" etc.Please help.I have windows 7 64

    I have windows 64 and trying to download itunes 10.5, it start downloading but then after it`s almos finish i have a window pup up with error Microsoft ft VC80.CRT,type="win32" etc.Please help.I have windows 7 64

    same here.

  • Help? New iPad2 exchange email was working. Now won't download email and existing emails disappearing - newest disappearing first.  Can connect to web. And my windows computer connects fine to exchange server.  What's going on?

    Help? New iPad2 exchange email was working. Now won't download email and existing emails disappearing - newest disappearing first.  Can connect to web. And my windows computer connects fine to exchange server.  What's going on?

    Actually all are affected, but i manage to solved it running Virtual test version to trace the issue and finally able to fix it. Thanks for asking.
    IT Technician

  • Lync 2010 won't download - error says it requires Windows 7

    Lync 2010 won't download - error says it requires Windows 7 BUT I HAVE WINDOWS 7 !! 
    Very frustrating. After using Lync 2010 for the last year it did an auto-update and at first said it was missing a file. So I uninstalled and reinstalled and now am told that "Only windows XP3, Windows Vista and Windows 7 are supported. Please upgrade
    your PC" But I DO have Windows 7. 
    Yes I know it's old. My new PC is sitting here waiting for me to change over but that can't happen for another month or so as I need more memory in it. In the meantime, I need to get my Lync 2010 working again. 
    Any help is greatly appreciated! 

    Hi,
    This was finally figured out by someone internal to my company, a Lync specialist. This is what the solution was (in I.T. speak - sorry, I'm not I.T.):
    Resolution: Checked and found COE was configured to run on XP SP3 where the minimum requirement is SP3
    He definitely was opening files and checking boxes way beyond my simple "uninstall" and "reinstall".
    Thanks!

Maybe you are looking for

  • I have no idea where to turn now...can someone help me?

    Don't know who to talk to now so this will be long...... sorry: So, in January I went to the Verizon store to either have them fix my Galaxy Mini 4 or maybe upgrade my edge for a new phone. So after looking everything over, I had decided I'd get eith

  • Report on Foreign currency valuation

    Sub:How i can get report from FGCL_FC_VAL Dear gurus, Configuration of foreign currency valuation is done.Only thing is that how i can run said report.I mean what data i should put in said report,so that when i run FGCL_FC_VAL,the system will do auto

  • Connecting to standard TV set?

    Hello, would like to know if anyone has any tips for connecting my powerbook directly to my TV for viewing both commercial DVD (through idvd) and avi files (through VLC) I can get an image and audio (s-out). However, the video window needs to be way

  • A Possible SetInterval Disaster

    Hi All, I have recently used the SetInterval class in flash 8 to help me create a delay before initiating an action However I was told that it is the issue behind several inconsistency or error that I was facing. And after removing it, some of the pr

  • Convert hashmap (containing null values) to hashtable

    hi the following code gives me java.lang.NullPointerException how can i convert a hashmap ( contaiing null values ) to hashtable... ?? and vice versa ?           HashMap hm =new HashMap();           hm.put("1","one");           hm.put("2","two");