Won't enter hdd recovery mode
I have a Tecra A2-s336 model that won't enter recovery mode when I hold 0 during the power up. It flashes *hdd recover mode* (or something like that, it's really fast) then boots right into window. I've checked the recovery partition and it seems to be fine and "healthy". Is there something else I need to do? I simply want to restore it to factory settings.
Tecra A2-S336
Apparently, your recovery partition is not in good shape.
Can you make recovery discs? See the section Creating Recovery CDs/DVDs on p. 63 of the User's Guide.
Tecra A2 Series User’s Guide
-Jerry
Similar Messages
-
I have a Toshiba Netbook (NB205-N330BL) that will not start. It shows the Toshiba splash screen then goes directly to a command prompt screen, but will not allow you to type anything at the prompt.
I tried entering HDD recovery mode by holding down zero(0) during startup. The netbook will not go beyond the splash screen unless I release the '0' key briefly and press again, then it goes to a command prompt screen with "***** HDD RECOVERY MODE *****" displayed at the bottom of the screen, but will still not allow you to type anything at the prompt and will not respond to any other keys.
Am I doing something wrong? How do I get from there to the warning screen described in the user manual?Hi there lsnowden!
I have a couple of articles here that I believe will help you resolve this issue with your Mac. The first article addresses a few different startup issues that can be solved by using Disk Utility, and can be found here:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
If you only get a grey screen on startup and can't get past that, then you may want to check out this article as well:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
HT201263 What if my ipod touch won't go into recovery mode because it is pw locked?
What if my ipod touch won't go into recovery mode because it is pw locked?
Go into Recovery Mode per the instructions here.
-
McBook 2011 shuts down when want to enter to recovery mode
Hello everybody, I got a problem with my Mcbook `11 recovery mode , I wanna enter to recovery mode but it gets shut down before I do. there is no problem when OS starts up but for recovery mode I have this problem.
I appreciate your help. Thank UAfter toyin around a bit more, I managed to attempt to mount the boot dmg on the RHD. The follow happened:
This confims to me that my boot dmg is corrupted. However I wanted to rule away the option of the firmware password, and hence mounted the dmg with no verification. Using this I was able to sucessfully remove the firmware password. After rebooting I got indeed not prompted for a password when holding alt. The problem with my RHD however persisted. -
currently at ios 7.1.. suddenly my iPhone entered into recovery mode without any reasons.. i tried using iTunes restore the iPhone.. after the process finished... I still stuck at recovery mode. any idea?
i have tried to restore via itunes as i would have usually, half way through i get an error code 3194 pop up.....and yes i do back up.
Thanks for your help but i've already tried this a couple of times. -
OS X Lion 10.8.2 won't boot into recovery mode
Help! OS X Lion 10.8.2 won't boot into recovery mode, I get a grey screen, the apple icon and the spinning symbol...Does anyone have any suggestions?
Have a MacBook Pro (2009) and had no problems until upgrading to LIon from Snow Leopard... thanks!Hi there - thanks very much for your suggestion, it did reboot eventually but took a long time to get there.
I've have run Disk Utility. After Verifying the disk it said it needed Repairing - so tried doing that and got the message " Error: Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files" I have got Time Machine but haven't backed-up since Dec 12...Can I use "Restore" to copy the MBP HD to an external HD and then re-install Lion? -
Ipad 2 3g and wifi asked for update. would not let me do it via the update within the ipad, so I went and do it via computer and now I am stuck on recovery mode, it won't let me get off recovery mode. I keep getting different errors.....any idea?
the ipad could not be restored. an unknown error ocurred (1)
-
Ipod Won't Go into Recovery Mode
I tried holding down the home button as I am plugging it up to my computer, and I keep holding it after I get it in waiting for the Recovery Mode Icon to Pop up. But all it does is go to the home screen as if I turned it on. Help.
- Try these instructions:
Recovery Mode
- Try using this program
RecBoot: Easy Way to Put iPhone into Recovery Mode -
My iPod touch won't go into recovery mode
I have a first generation iPod touch, with a slightly broken home button (I have to press it really hard to work).I had just erased the memory off of it, and it had rebooted. As it starts up, it keeps getting stuck on a screen with an Apple logo, wth a loading circle below. The circles spins for a few seconds and then stops. I have tried hard reset (home and power button). I have also tried home and power button for ten seconds, and then just home button for ten seconds. I have tried that numerous times, while in iTunes, and while out of it. I really need some help, as it has no warranty left, so I cannot return it.
Thanks in return,
P.S I really would apprecciate any help.This program my place the iPod in recovery mode:
RecBoot iPod-1.0.2-Mac-Jaxov.zip - File Shared from Box.net - Free Online File Storage -
HT201263 what happens if my iphone won't go into recovery mode?
I tried to update to the new software, but for some reason it did not complete the install and has left my phone in a state of "plug phone into itunes". I have tried getting my phone into restore mode, using the instructions on the Apple site, and it is still in "plug into itunes" mode and itunes still does not detect the phone. Without going to an Apple store on superbowl sunday, can anyone help me?
Try to restore it from DFU mode as follows:
Reboot your computer
Disable your antivirus and firewall
Connect the USB cable to a USB port directly on your computer, not a hub - do not connect the other end of the cable yet
Launch iTunes, making sure you have the latest version (11), or at least 10.7
Hold the HOME and SLEEP buttons on your iPhone for EXACTLY 10 seconds, until the screen goes black, then release the SLEEP button but continue holding the HOME button - If an Apple logo appears you have held too long; do it again
Connect the cable to the phone while holding HOME
iTunes should recognize a phone in Recovery mode. When it does release the HOME button and wait
Don't touch your computer or phone until the restore completes or you get an error message; ignore any other displays or messages on the phone.
If you get an error message post it for analysis. Include the error number. -
My I phone 4 has put itself into recovery mode and I cannot now restore it. I have plugged it into I Tunes about 10 times and every time it starts to restore then comes up with the message Corrupted file start again. Please help.
Try restoring as a new device first.
-
IPod won't enter DFU/Recovery, won't connect to iTunes and is locked out.
The iPod for some reason does not connect to iTunes even in Recovery mode, I locked myself out to the point that I need to connect to iTunes
Hello GlitchedPanda,
Thanks for using Apple Support Communities.
Please follow the article below to troubleshoot this issue of your iPod not being recognized by iTunes.
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
Take care,
Alex H. -
IPad stuck on loading screen, won't move to recovery mode.
I tried to restore my iPad but it got stuck on the loading screen and it didn't change for 6 hours. I tried restarting it a couple of times - it showed me the normal apple logo but then it went back to the loading screen. The computer doesn't respond to the iPad and i hadn't been able to put in on recovery mode.
How do i turn my iPad back on? I don't mind stuff being deleted.Hi zafr1212,
Welcome to the Support Communities! The resource below will provide the steps to put your iPad into recovery mode.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT201263
Use recovery mode
You might need to use recovery mode to restore your device in these cases:
iTunes doesn't recognize your device or says it's in recovery mode.
You see the Apple logo onscreen for several minutes with no progress bar.
You see the Connect to iTunes screen.
Learn what to do if you see the progress bar onscreen for several minutes.
To put your device into recovery mode, follow these steps:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.Get more help
Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
If you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
Last Modified: Nov 7, 2014
I hope this information helps ....
- Judy -
My iPad won't stay in recovery mode
I have an iPad 2 I forgot my password and no longer have the desktops used to sync my pad. I am trying to restore my iPad with my new computer but my pad will not stayin recovery mode. It keeps going back to the screen that ask for my password....
Force iPad into Recovery Mode
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times. -
The macbook extremaly slow when entering to recovery mode
Hi all.
I have a macbook pro mid 2010 with 10.8.5 on it
When I go to recovery mode, a computer begin to be super slow.
Also after each update what I made, I get a kernel_task 100% cpu usage, and must found and delete file macbookpro_7.1.plist
Is this any solution for this issue?
Thanks.http://support.apple.com/kb/TS3694#hardware
Maybe you are looking for
-
Doesn't feed paper. color laserjet pro mfp m177fw
I just bought the Color Laserjet Pro MFP M177fw. I removed all the packing as instructed in the installation guide. While initializing the printer makes a strange noise. When I try to print it gives me a message to load paper. No matter how much pape
-
Naming clips within a sequence
Help, I'm stuck! I've created a sequence from a subclip and would like to assign a different name to each clip within the sequence. Changing one clip affect all the others. I have tried all the options described in the editing workshop book by Tom Wo
-
Apps in "purchased" are not mine!
Many apps are showing up in my "purchased" apps for iPhone and iPad which I am certain I have not downloaded. Has this happened to anyone else? Also, is there any way to find out from apple the IP screws where these were downloaded from, or perhaps t
-
CS 5. Will it work with Mac OS 10.10.1?
Will it work with Mac OS 10.10.1? If not what is the latest version of Mac OS it would work correctly with? The most recent version of the Mac OS is 10.10.1 (Yosemite). Do not wish to update if it will affect my ability to use CS 5. Thanks,
-
I have Snow Leopard ver.10.6.8 and I have uninstalled iwork, because I don't have the equation writer on pages. So I re install it from the iwork's disk and when I tried to open any of the Apps, the system told me " check with the developer to make