Won't Export All

Hello,
I'm fairly new to FCE and I'm trying to export a sequence which is only 32 seconds long. For some reason, it stops at the frame 16;07. I've rendered all the clips prior to exporting. I'm currently trying to export to a .wmv file with Flipformac, but I've tried exporting to other quicktime conversions with the same result. I've even tried setting an In and Out point at the beginning and end. My sequence is made up of another sequence on V1 and a Title3D on V2.
Does anyone have ideas as what I could be doing wrong?
Thanks,
Lawrence

Sorry Guys,
I'm working on several problems here, trying to get a quick animation into Powerpoint for windows. I've just tried again to export to a Quicktime and it exported the whole thing. So maybe it's just my flipformac plugin that's the problem. Still, if anyone has any suggestions, please let me know.
Lawrence

Similar Messages

Aperture won't export all photos to Mail

Most of the time, Aperture won't export all my chosen photos to Mail. If I chose 8 photos, it may only export 4 of them and no matter what I do, nothing changes. Tried it on Entourage and it was exactly the same. Size is not the issue, I'm sending them in small sizes and the total attachment is about 1 MB. Anyone had this issue and know what to do? I do have NIK plug ins installed if that helps any.

I would suggest you do a library repair to see if that clears it up.
See Aperture 3: Troubleshooting Basics

Lightroom 4 won't export all my files and doesn't notify which ones it didn't

I have a large library and one day i wanted to make sure that none of the files were corupt so I thought of an idea to export my entire library to see if i get a notification if any of my files didn't export. I could then check on those files to see whats wrong. But trying to export that many images caused lightroom to crash so I exported by year instead. Some years were fine, but others like 2011 for example, out of 13906 images, only 9824 exported. I would be ok with that if lightroom notified me which images didn't export. Normaly, when i try to export images that are ofline, lightroom will tell me which ones didn't export and say that they can't be found. How am i supposed to find those 4000 images that didnt export if i don't know what there file names are? I tried exporting the previews as a catalog and all 13906 exported fine. I updated my dng previews and I even genereated new standard sized previews as well. I also ckecked for missing images under Library/Find Missing Photos, and there were none missing. Here are the type of files i was trying to export: DNG: 13017, jpeg: 9, PSD: 61, TIFF: 819. None were videos.
Please Help!

Thanks for your reply. I don't necesarily think I have corrupt files, but i want o make sure i don't so that when i do a back up, the corupt file doesn't replace the good ones on my backup drive. I have over 100,000 images in my library and there is absolutely no way that i am going to scroll through all of those to look for an exclamation point. I wish lightroom could scan my whole library for any questionalable files.
I have tried to export known corrupt files where I could see an exclamation point or a large purples band, or both, and they don't export. Thats why i wanted to export my whole library to see if i can find any of those. But lightroom notifies me when they cant export. I don't know why it doenst say anyting now. Im glad you mentioned about the stacking, i didn't know about that, however, i don't used stacking, so that is not the issue. There might be 10 or 20 that i accidentally stacked, but not 4000.

Exporting ePub won't export all pages

I am trying to create an epub document that is 95% images (children's book). The images are placed inline and not dropped in like images would normally be. When I export the document and open it in iBooks I only get 1/2 of the pages exported. Not sure what is going on. get a formatting error when I export the epub, but I can figure out what is causing the error. Any ideas?

donny,
How exactly did you fix this problem? I am having the exact same issue (also trying to put one of my daughter's books into the iPad via Pages), and like you, I don't get all of the pages. I have Pages '09 4.1, and working on a MacBook Pro (2010 vintage). I have spent days trying to get this project sorted. I started with iBook, but the Apple ibook ePub like standard does not support the page turning function. I downloaded Pages last night and have this problem now. BTW, I tried to create a second book with a whole new set of images, and got the same problem (although on a different page number).
Any help would be appreciated, as my daughter is growing up fast.

Exporting: iPhoto won't show all edits and modifications when exporting

Hi there,
A problem recently cropped up in my iPhoto album.
I'm using at 12" PowerBook G4, 1.5GHz, 250GB HD / 1.25GB RAM / OS 10.5.6 / iPhoto 8.0.2 (iPhoto '09). My iPhoto library contains 29,654 photos and 333 movies in 474 events and measures 119.2GB, including content since 1999. It's stored on a LaCie external FireWire drive.
The problem I'm experiencing is as follows:
Certain photos, no matter how I export them, be it via the +File -> Export+ command (to +File Export+ or Facebook (having installed the plug-in) or by dragging-and-dropping from iPhoto to the Finder, will not export with all (or sometimes any) of my edits (a.K.a., enhancements,changes or adjustments) made.
This is to say, for certain photos, I cannot figure out how to get the version of the photo I can see within iPhoto out of iPhoto so it can be shared or used elsewhere.
These +certain photos+ which won't export properly seem to be ones which have had more extensive editing done to them, specifically having had extensive shadows, highlights, definition or de-noise work done.
I have searched the Support Discussions and the web for other case and have found a several. Unfortunately, all of the helpful Support Discussions regarding this issue were archived (and closed) before they reached a solution.
Here is an example of such a case where the various Support Discussions users went to extensive effort to solve the problem but ended without a solution in August of 2008:
http://discussions.apple.com/thread.jspa?threadID=1519734
Thanks in advance for any support.
AE

LarryHN,
Thanks for responding so quickly.
LarryHN wrote:
1 - if you have not try file ==> export and set kind = current
Yes, unfortunately I've tried this. I also tried exporting in every different format, without any luck.
LarryHN wrote:
2 - select the photo in iPhoto and right click (control click) on it and select show file - this will open a finder window - see if the file it brings up has your modifications
This takes me to a file within a sub-folder of the Modified folder. This is an incorrect version of the photo. Choosing +Show Original File+ from the secondary-click menu takes me to another incorrect version of the file within a sub-folder of the Originals folder, as expected.
LarryHN wrote:
3 - go to your iPhoto library and right click (control click) on it and show package contents - look in the modified folder (be very careful not to make any changes of any sort) and look at the photo there with preview and see if the changes show up
Here I ended up at another incorrect version of the photo, which was in a sub-folder of the Modified folder... I think this is the same file I was directed to when I secondary-clicked and selected +Show File+.
Thanks for the help -please let me know if you have any further suggestions.

Logic 10.1 won't give me the option to 'export all tracks as audio files'. Why is this?

I need to send an important session today but when i go to file>export>all tracks as audio files, the option doesn't appear. I searched the help bar and did my own research on the internet but i couldn't get any answers. Is anyone else experiencing this problem or knows another solution to export all tracks as audio files?

You aren't running in Garageband mode are you? Do you have ALL of the Logic Preferences/Advanced enabled?

Podcast won't export from Garageband to iWeb

Hi all
Help appreciated with this. I do a two hour music podcast (www.whatyouwantradio.com also available at http://soundcloud.com/whatyouwant-radio) which is created in Garageband and then exported to iWeb for uploading to my website. I've been running this, with few problems, since April 2009.
Recently the garageband podcast won't export to iWeb. It's random, and I seem to have been able to bypass it by changing the filename slightly, or adjusting the quality at which it is exported (I like to export at 320mps for best quality - big files but no complaints from the 100 or so listeners. Could be more - who knows as I can't get stats from iTunes. But I digress). However, the most recent podcast, which is already available on Soundcloud, just won't export. It goes through the motions (mixdown etc.) but nothing appears on iWeb on the other side. No error message, nothing. I know that memory has also been an issue in the past but right now there is plenty to spare (5.37GB at last glance).
I'd really be grateful for some help on this, I'm at a bit of a loss - no error message, no clue. As I say, this podcast has been going for nearly three years and it's only recently I've had this problem.
Cheers,
Stuart
Mac OS X 10.6.8
Garageband '09 5.1
Model Name:
MacBook
Model Identifier:
MacBook5,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.4 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
3 MB
Memory:
4 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
MB51.007D.B03
SMC Version (system):
1.40f2
Serial Number (system):
W8912A098QT
Hardware UUID:
CE258311-95FB-5BB2-BF43-DC494598B584
Sudden Motion Sensor:
State:
Enabled

Just a further note on this. I tried a couple more times yesterday to export the file. Starting out with over 5GB of memory, by the time I had tried twice this had gone down by a couple of GB. Still no export. This morning I noticed some new files in the trash that were from around the time of the failed exporting:
Note sure if you can see that, but I'm guessing the files are something to do with the failed export? Does anyone have any thoughts? Either way, this problem is still annoying the **** out of me...
Stuart

Numbers Won't Export Eitlher!!!

This is ridiculous. Can't email or export numbers files. Can't do a restore to get my notes back until I can export my spreadsheets so I don't lose those too.

Yes, I upgraded my iPad to 3.2.1 before I noticed this problem. I have exported my Numbers spreadsheets before. I have several spreadsheets and am able to export all but one. The one I really need to export (of course) has multiple tabs in it. I thought maybe it was too large, even though I have been able to export it before with no problems. I copied the first tab into a new file and I still have the same problem. I choose "Export" and the it has a progress bar that goes about halfway and then it quits. When it quits it returns me to the home screen of the iPad.
I really need to try to get my notes back that I lost after the upgrade but I can't even attempt this until I can figure out how to export this spreadsheet. My understanding is I will lose everything on my iPad and then when I use a backup file to put everything back on my iPad it will be data from that date of the backup. I have updated this spreadsheet (daily) since the upgrade but I could recreate what I have updated since then if necessary.
To make matters worse, I am leaving on vacation Friday and can't worry about any of this right now. I need my iPad (& my notes)for this trip but I won't be able to fix it before then.
Sorry to rant this is frustrating.

One font won't export

Hi, all. Sorry if this is basic--I'm just a simple artist-designer, and am less skilled at software management and presets.
I just reinstalled my ID CS4 on a new-to-me machine running OSx Mountain Lion. For an unknown reason, the software now won't export the Helvetica Neue Regular font (all other fonts in the typeface are FINE.) 'Regular' exports as lines of boxes. HNeue has been my go-to for many years, and I'd rather not reformat all of my old stuff. Thoughts?
HNeue Regular shows up in fontbook, and I already tried 'restore system fonts.' Also set "Subset all Fonts" to 0%. I have no idea what this means, but the internet told me to do it.
Thanks for your ideas. This is really messing me up.
Emily

Saw this post and thought it can be easily fixed but I haven't worked on a Mac for about 10 years. I'm sure there's someone that can help.
The only thing I would suggest trying is disabling it in your Font Management and copying the font to your system Fonts folder.

How to export all images that don't contain editable text

Hi guys,
Is there any hack, script or general function to export all images from a PDF withouth them containing editable text?
For instance, i have a pdf that contains some scanned documents - these need exporting, i also have some tables in there that have editable text in them - these are being exported when i select export all images.
Can anyone help?
Cheers!

Search for a word or words in them as a group. Search for .pdf file type and containing....
Use a common word that they all might contain such as "a" or "the", etc.
The files that have been OCR'd will show up in the search. This won't catch 100% of them, but it will allow you to separate most of them.

How do I export all the photos I imported back to their original folder

How do I export all the photos I imported back to their original folder just as they were, they haven't been modified, adjusted etc. I imported them by mistake.

You don't need to worry. You won't lose photos when the 30 day trial expires.
Lr is different than other photo editing software in that it works with a data base (called the "catalog"). Lr does not write anything into the image pixels but stores everything that you do in Lr into its catalog (=data base). That way, when the trial expires your images will still be there, but - since you cannot access the Lr catalog anymore - your photos will be in the state they were before you imported them into Lr.
When you work with Lr you have to really understand the concept of the "catalog", if you don't you will come into very frustrating situations. The concept of "catalog" involves above all that you need to think of your images based on two different files that are in different locations on your computer. One is your image file (Raw, JPG, TIFF) and the other is the data entry written for this image into the Lr catalog. Lr constantly updates this catalog (without you having to hit <save>) and constantly combines the image file with the data from the catalog. From this follows the demand that you take care of the Lr catalog as much as you take care for your image files - by knowing where they are located on your computer and by doing regular backups.
Would it be worth the investment? In my opinion definitively "yes"! I work with Lr since version 1 on a daily basis and would not want to miss it. Lr gives you superior image editing possibilities (in the Develop Module) but - as already said - is also a superb image management tool. Lr will keep track of all of your images irrespective if they are on internal or external hard drives. With Lr you have all of your images available all the time.
But Lr has also a steep learning curve. You cannot just jump in and do things because you'd create havoc and become frustrated. There are excellent books but for starters I would recommend that you watch the video tutorials on Adobe's website. You learn from them easily because you see on your screen what the instructor does, where he clicks, where the different tools are, etc.
Here are some links:
http://tv.adobe.com/product/lightroom/
http://tv.adobe.com/show/adobe-evangelists-julieanne-kost/
http://tv.adobe.com/show/learn-lightroom-3/
If you decide to buy, you can do so on Adobe's website. You will then be e-mailed a serial # that will unlock your trial version for indefinite time.

InD suddenly won't export to pdf

I've been exporting files to pdf all day to send to my printer, and suddenly InDesign won't export anymore. Pop ups open as usual, but nothing happens.Grrrrrrr!!

Are you patched to 7.0.4?
Is the export hanging in the background, or is a file supposedly created, but non-exisitent? Have you opened the Background Tasks panel to see if the task is completing?
Can you export in the foreground by putting the file in a Book?

Pages won't export to Word

Running latest Pages in latest Lion on a new iMac. When I try to export to Word, I get an error message: "The file format is invalid."
A Word doc IS actually created, but it has all Comments stripped out...making it utterly useless to me. I've tried uninstalling iWork 09, restarting the iMac, then reinstalling (and re-upgrading) iWork 09 from the original disc, but no love -- it just won't export a Word file with Comments.
Anyone else having this problem? Anyone have a solution?
Thanks!
Barry

Well, I tried export to Word before saving the document in Pages. It worked fine! I didn't finalize the changes in any way. I could open the .doc document and it still showed the changes and comment field.
I think something is corrupt in your document. You could select the content and paste into a new blank template and save it and then export to a Word document. Then undo all changes in the original document to the point you started the changes and copy and paste into a new document and give it a different name. Now you have a before and after the changes and hopefully the corruption didn't get copied over.

Lightroom won't export my exact dimensions

Lightroom won't export my exact dimension for my photos. How can I change this.

Are you running the latest version?
In Lr5.4 most but not all of such bugs are fixed.
If already running Lr5.4 then go to feedback forum and cast vote to the problem fixed.
Lightroom 5: export isn't resizing exactly to specified long edge.

Suddenly Media Encoder won't export to .avi from a Premiere Pro sequence

Came back to work today and out of the blue Media Encoder just won't export to .avi from a Premiere Pro sequence. Working with CS5 on Windows 7. That was the last thing I did yesterday before leaving work and it worked just fine, and it has always worked without any problems ever since I upgraded from CS4.
Here are the steps I always take: go to Export-->Media from the Premiere Pro sequence and the settings open up, I select Microsoft AVI - PAL DV, click the queue button, AME opens up but nothing loads, the queue remains empty and nothing happens.
I tried the same but selected MPEG-2 instead and it works that way.
I also tried opening the sequence directly from AME and it does it but it doesn't give me the option to export it to Microsoft AVI, it's just not on the list.
I deleted all preferences and old metadata options saved from all applications but that didn't help.
Didn't install any updates whatsoever that might have changed anything at all from yesterday till now.
If anyone knows what the problem might be and how to fix it, that will be truly appreciated, thanks in advance.

After a couple of hours going through the registry and every folder and file inside "Program Files--Adobe--Media Encoder CS5" and trying to find the problem, I did.
Thing is, the ExportAVI.prm plug-in file wasn't missing, it was there in the "Plug-ins--common" folder together with every other exporter and importer file, it just wasn't being loaded by AME for some reason. So i found a folder named "txt" and inside it there was a file named "AddExporterList.txt" which I opened and, as you could probably imagine from its pretty self-explanatory name, it contained a list of the exporter files that AME was supposed to load, and the AVI one wasn't on the list.
I wasn't sure wether it was best for me to edit that text file and add the AVI exporter to the list or just delete the damn thing, so i checked on an older PC with the CS4 suite installed in it and the "txt" folder didn't even exist, so I just deleted it and opened up AME again and it loaded every single exporter .prm file including the ExporterAVI.prm of course and it works just fine now, so that's a load off my shoulders, hope this might help someone else in the future.

Won't Export All

Similar Messages

Maybe you are looking for