Won't export with QT Conversion

Hi,
I'm trying to export my footage with QT conversion (mpeg2) with chapters for a PAL DVD. For some reason it's telling me I can't until I render it but this has been done. Is it to do with scratch space?
Thanks guys.
Chuck

Thanks David!
I've never struck that before and after doing what you suggested I also needed to manually do a 'full' render as opposed 'render all'. Weird as everything in the timeline appeared OK.
Exporting now.
Thanks again
Chuck

Similar Messages

  • Trouble exporting with QT conversion

    Hey all-
    When I export using QT conversion, choosing the LAN/Intranet option, the export takes a couple hours and the product is, for lack of better a explination, "herky-jerky." Like there are frames dropped in it.
    Most of the media in the original project suddenly went offline, and I can't find or reconnect it. Thankfully, I was able to export a full quality version just prior to this happening. So I'm just taking that file, importing it into FCE, and exporting it with the conversion. Which is assume is a fine solution. All rendered and mixed-down. Any suggestions?
    I have FCE 4.0 and QT 7.6.

    You should have edited your video in a Timeline that reflects the codec used in the original material.
    Export a QuickTime movie using "Current Settings". No recompression or conversion.
    The movie can be Self Contained or a Reference Movie.
    Bring that file into Compressor. Choose a DVD Preset that fits your movie. For instance, Best Quality 90 Minutes if your movie is less than 90 minutes long. Click on "All" and delete the AIFF audio file from Compressor. Click on Submit. Wait.
    Bring the m2v and ac3 files into DVD Studio Pro. Author and burn your DVD.
    Alternative: Bring the exported movie from FCP into DVD SP and let the encoding take place there instead of in Compressor. Or as David suggests above, Export Using Compressor. Note that this will lock up FCP for the duration of the encoding.

  • GPS Metadata Won't Export With Master?

    I've exported a master and a jpg version of the same photo that has GPS data from Places on it from A3 and imported to into LR2.
    The jpg arrived with GPS metadata but the master did not. I double checked A3 is set to include the IPTC data set on export and for good measure I re-exported other GPSed photos and checked them in Preview in case LR2 was doing something to the GPS data. Same results in Preview.
    A3 isn't letting you take masters out with GPS intact AFAIK. Anyone see this?

    Yes, I'm experiencing the same problem. GPS info is exported with the jpeg but not with the master.
    I think A3 is only using the internal places database to store the GPS info and it gets written to the jpg only when exporting (and assuming you've selected to export locaton info), in the same way as it happens with Iphoto.
    The logical workflow should be to write everything (IPTC, GPS and date) into the master when selecting update master metadata, or at the very least to have a choice of which of the above to include in the metadata update.
    Right now the only way to ensure that all masters are properly GPS tagged is to use an external GPS editor such as houdageo, however this only works in Aperture 3 with referenced files.

  • Adobe Media Encoder: Audio won't export with video

    I am trying to convert an AVCHD video for viewing on my iPad 3. I use Adobe Media Encoder and select the iPad 2 settings (1920x1080) and it exports the video perfect, but no audio. I have "Export Audio" checked off. I tried it with 5 other settings and it just wont include the audio. Any ideas?

    Seems random people are running in to this, so hopefully this solution will be found by whomever's looking.
    If you're exporting video files from Final Cut Pro as .mov, and then trying to convert said .mov to an .mp4 using Adobe Media Encoder and are losing audio even though you're multiplexing, try this...
    Make sure that you export only a 2-channel audio track from FCP.   When I export from FCP, I split my audio into various tracks by default.  Great for making master clips, but problematic if uploading to YouTube or doing further encoding in Adobe Media Encoder.   Like YouTube, if you have more than 2 tracks of audio, Media Encoder seems to get confused and ignores all audio tracks.  Combine all audio into a 2-channel stereo track and see if that solves the problem.
    Regardless of editing program, see if reducing number of audio channels from source clip solves problem.

  • Music won't export with slideshow

    I've created a slideshow with music that works perfectly in Iphoto. When I export to Itunes or IDvd the slideshow looks perfect, but no music is playing with it. I double-checked to make sure my playlist is selected and applied.

    Try creating the slideshow using another account to see if the problem is repeated there. If it is not, then the issue is in your account.
    If you can't get things to work correctly here is an idea for a workaround. Create the slideshow in iPhoto, but do not use any music. Import into iDVD as a slideshow, and add your music there.
    You can also report your difficulties to Apple: http://www.apple.com/feedback/iphoto.html
    I hope this helps.

  • Final Cut X 10.1.3 won't export with media on a xSAN drive

    We have a new Facillis xSAN drive and about 36 computers logged onto the drive. The computers are all running 10.9.4 and edit fine with media on the SANs drive while in Final Cut X v10.1.3. However when we attempt to export and click on the share button nothing happens, the share menu stays there as if it wasn't even clicked on.
    When we move the footage onto the local computer HD it exports fine. Any ideas as to how we fix this problem?

    Hi,
    I have run into the same issue with Terrablock. They have sent me a fix, but I have been too busy to test it yet. So, this year all my students will be keeping libraries locally with external media and cache on the Terrablock. What we are also doing is they will have a backup libraries folder on the Terrablock and at the end of the day, they copy they're library over to that. This means even if the person who edited on the previous day is off they can still access the latest version of the library.  As, it seems as long as the library is initially created locally you can copy it back and forth, and export from it as long as you have opened from a local drive. If you create the library on the Terrablock and copy it to a local drive you still can't export.
    We are also going to use Backups for FCPX Pro from NP Associates. It lets you set backups to 5 minutes or any time you require as in FCP classic. It's on the App store.
    VJIse

  • Slideshow won't export with music when preview is fine?

    I have a slideshow that I chose a song from my iTunes library and when I preview it everything is fine. When I export the slideshow I get no sound. I've created a separate slideshow with the same pics and same song but still get the same result. This is maddening. Anyone else have this happen?

    What's the source of this song? Bought online? Is it DRM protected?
    Regards
    TD

  • QT Conversion Export with DVCProHD 720p60 creates black bands. Help.

    Help. A recent QT movie export, using the DVCProHD 720p60 settings, when opened in QT has thick black bands across the image. 3 on the left, 3 on the right and one right in the middle.
    When I export using QT Conversion in DVCProHD 720p60 the exported film actually has these black bands in it.
    Is this a codec issue? I recently downloaded the QT HD codecs and perhaps I installed the wrong one? Please help!

    Hey Nick,
    I did exactly as you suggested but the thick black rectangles/bands still appear down the left and right sides and one smack in the middle. I'd send you a screen shot if I knew how. It seems to happen only with the DVCPro HD export but this is what the footage is in and anything else may screw with the image.
    Could it be a codec thing? Any other ideas?

  • Audio Does not export with ideo in quicktime conversion

    I know i did something with a keyboard shortcut during the editing process, but i cant figure out what i did and how to change it back. What my issue is that when i try to export it to any format in quicktime (in quicktime conversion) the video is ok, but my audio does not export at all.
    I dont know what went wrong but i should note i pressed something on my timeline that i didnt realize what it did. Its hard to explain what it looks like, when you press on different clips all the clips on my time line quickly turn a more silver/light color and then change back to the normal color(not effecting the video quality just the thumbnails). But it is has a weird color
    is there a way i can reset all settings without adjusting my video clips?
    Sound settings
    Format: Lubear OCM
    Channels: Stereo (L R)
    Rate: 48.0000 hHz
    Render Settings:
    Quality: Normal
    Linear PCM Settings:
    Sample Size: 16 bits
    Checked: Little Endian

    Hi(Bonjour)!
    Does the audio play when you run sequence?
    Did you toggle off the monitor icon at the left side of timeline for audio track?
    When export to quicktime conversion, select quicktime movie and click OPTION.
    From this point, you should see a checkbox for SOUND. Be sure to check it ON.
    Michel Boissonneault

  • Saving Settings for use with Export using Quicktime Conversion

    Dear All,
    Is it possible to save a set of settings for use with the Export using Quicktime Conversion feature? The reason I ask is that we have to export a quicktime of every tv commercial we make (using the same settings) and it would be great if "one click" could deliver the export settings we need.
    All the best, Sean

    Well, you can create a droplet from Compressor that would do what you'd like...
    Open compressor and in the Help menu, Select the user manual. Navigate to page 315.
    Jerry

  • Missing with chapter markers after Export Using QuickTime Conversion

    I have my FCE workflow setup as follows:
    I create the sequences using relatively large video source files, in Apple Intermediate Codec (AIC).
    Then, I use Export -> Using QuickTime Conversion to H.264 Codec, but my chapter markers are lost.
    If I use Export -> QuickTime Movie, the chapter markers are preserved, but the codec is still AIC.
    I need a compressed file with chapter markers. What am I missing?

    One more time: "Where are you looking at the exported file? After making a DVD or somewhere else?"
    Can you answer this for me? How are you looking at this material? Off the DVD you've burned? Is that what you're saying? Comparing the QuickTime Movie export to a DVD burned from a PhotoJPEG export? Or are you playing it from the computer to HDMI? If so are you using the QuickTime player? Is the QT player set to high quality playback? Yes, PhotoJPEG (not JPEG Photo) is a very large file especially at full quality. You probably don't need any more than 75% quality. I'd be very surprised if you say you can see the difference between 75% and 100%.
    The length of the video is important not the size of the disc. iDVD's compression is fixed by the length of movie and the amount of content that has to be encoded.

  • IPad Won't Sync with MKV to MP4 720p Videos

    I converted some mkv files (1280x720p x264, AC3) to mp4 using QuickTime 7 and Perian by exporting to mp4 with the video set to pass thru, and the audio set to AAC 160 Kbps 48 kHz. ITunes won't let them sync with my iPad, but it doesn't tell me why. One possible issue is that the atom (something I know nothing about) has been reported as having a length larger than the whole file by another program. Is there something I can change with my conversion method or an application on the Mac that will repair the atom?
    Thank you

    I converted some mkv files (1280x720p x264, AC3) to mp4 using QuickTime 7 and Perian by exporting to mp4 with the video set to pass thru, and the audio set to AAC 160 Kbps 48 kHz.
    Are you actually trying to determine the cause of the problem or just end up with a playable file? If the latter, then don't pass through the video unless you are certain it meets the Main Profile @ L3.1 (or under) standard. Otherwise, re-compress both video and audio to supported standards as specified on the Apple web site or use any compatible QT or third-party preset you may prefer.
    If trying to determine the actual problem here, then download and use one of the various movie info utilities that will allow you to examine the various settings used to encode the source video track to specifically include the profile and level used and see if they comply with ISO/IEC Moving Picture Experts Group standards. Many non-Apple custom encoded source files may either be encoded using profiles/levels exceeding iPad limits, employ hybridized or mixed encodings features drawn from multiple profiles/levels, or simply require a third-party decoder like those included in the Perian component package for playback and which, of course, are not available in the iPad firmware OS. Basically, when you pass the video data through without confirming its compatibility, you do so at your own risk.

  • FCP crashes when exporting to QT Conversion

    I just updated the FCP 7.0.2 and now when I try to export using QT Conversion Final Cut crashes. The crash log says the likely cause is the FLV encoder. Adobe says they fixed this in CS4, but I will running CS3 for some time. Does anyone know of another fix or can I "update" back to 7.0.1? I never had this problem with 7.0.1. Thanks.

    Thank you for your reply. Unfortunately Final Cut won't even open up QT Conversion to allow a H.264 export. As soon as I highlight QT Conversion in the drop down menu it pauses for a couple seconds then quits. I believe it is a bug in the 7.0.2 update, but I'll keep searching. In case anyone else has this problem, my work around is to make a FCP QT file and import it into MPEG Streamclip. It works great.

  • How do I stop Illustrator automatically adding numbers to file name when exporting with artboard?

    I need to export with artboard. Illustrator automatically adds a number to my original file name. It won't even let me replace the old file. It is extremely annoying and makes flow with other programs really hard because they can't auto update, since the file name  changes. When you have multiple files, you can't be manually renaming all the time. Anyone knows how to fix this? Thanks.

    This has been discussed a few times, and here is a summary of the usual solutions.
    http://forums.adobe.com/message/2989508#2989508
    What is it EXACTLY you are trying to do. Are you trying to export a single page from filename.ai  and make it filename.psd, (without any number afterwards). In that case you could delete the extra artboards prior to export, and then you won't have to checked use artbaords as there is only one page. Otherwise I would plan ahead so your end result will be filename-01.jpg,  filename-02.jpg, and then everytime you use export artbaords those names will replace.
    I am happy with the function as is, and would prefer to have a serial number automatically after the name when checking use artboards. But sounds liek you and others desire more options and thte ability to turn off adding to the filename.

  • Podcast won't export from Garageband to iWeb

    Hi all
    Help appreciated with this. I do a two hour music podcast (www.whatyouwantradio.com also available at http://soundcloud.com/whatyouwant-radio) which is created in Garageband and then exported to iWeb for uploading to my website. I've been running this, with few problems, since April 2009.
    Recently the garageband podcast won't export to iWeb. It's random, and I seem to have been able to bypass it by changing the filename slightly, or adjusting the quality at which it is exported (I like to export at 320mps for best quality - big files but no complaints from the 100 or so listeners. Could be more - who knows as I can't get stats from iTunes. But I digress). However, the most recent podcast, which is already available on Soundcloud, just won't export. It goes through the motions (mixdown etc.) but nothing appears on iWeb on the other side. No error message, nothing. I know that memory has also been an issue in the past but right now there is plenty to spare (5.37GB at last glance).
    I'd really be grateful for some help on this, I'm at a bit of a loss - no error message, no clue. As I say, this podcast has been going for nearly three years and it's only recently I've had this problem.
    Cheers,
    Stuart
    Mac OS X 10.6.8
    Garageband '09 5.1
    Model Name:
    MacBook
      Model Identifier:
    MacBook5,1
      Processor Name:
    Intel Core 2 Duo
      Processor Speed:
    2.4 GHz
      Number Of Processors:
    1
      Total Number Of Cores:
    2
      L2 Cache:
    3 MB
      Memory:
    4 GB
      Bus Speed:
    1.07 GHz
      Boot ROM Version:
    MB51.007D.B03
      SMC Version (system):
    1.40f2
      Serial Number (system):
    W8912A098QT
      Hardware UUID:
    CE258311-95FB-5BB2-BF43-DC494598B584
      Sudden Motion Sensor:
      State:
    Enabled

    Just a further note on this. I tried a couple more times yesterday to export the file. Starting out with over 5GB of memory, by the time I had tried twice this had gone down by a couple of GB. Still no export. This morning I noticed some new files in the trash that were from around the time of the failed exporting:
    Note sure if you can see that, but I'm guessing the files are something to do with the failed export? Does anyone have any thoughts? Either way, this problem is still annoying the **** out of me...
    Stuart

Maybe you are looking for