Won't Install in Win XP "The system cannot open the device or file specifie

When installing Quichktime or iTunes, the installer displays ""The system cannot open the device or file specified."
What should I do?

I was getting this problem too. To resolve I did the following.
Physically disconnected PC from network.
Stopped Anti Virus (Evira personal).
Turned off Windows Firewall.
Stopped Malware detection (PrevX).
Installed iTunes + Quicktime.
Restarted above security programs.
Reconnected to network.
Problem sorted.

Similar Messages

  • The system cannot open the device or file specified

    I am trying to install jsdk.142 but i get an error message that says "The system cannot open the device or file specified" Any suggestions on how to get past this?

    I figured it out myself. The temp folder that the program was using was encrypted. I removed the encryption and it installed fine.

  • RSAT won't install on Windows 8.1 Pro - "The system cannot find the file specified."

    Please help. RSAT won't install on Windows 8.1 Pro. Every time I try, I get the same error - "The system cannot find the file specified.". I really don't want to have to refresh the PC to get it working! I've installed the update successfully on
    a fresh win 8.1 enterprise install on a Hyper-V VM.
    I am in uk, so have installed the en-US language pack first. I did have a windows component store corruption but I've managed to fix that.
    event log says:
    Windows update "Update for Windows (KB2693643)" could not be installed because of error 2147942402 "The system cannot find the file specified." (Command line: ""C:\Windows\system32\wusa.exe"
    "C:\RSAT Windows8.1-KB2693643-x64.msu" ")
    CBS log (C:\Windows\Logs\CBS\CBS.log): http://1drv.ms/19CAv14

    As Roger Lu reported, the log indicates that there is corruption in the update files that you downloaded. The log actually reports “file not found”, so you may also want to check permissions on the extracted files in C:\Windows\SoftwareDistribution\Download\76ecaa86ec6712300c2d71cbcdad378c\.
    You can also re-try downloading the files to see if your original download was just corrupt.
    Bruce Wooding Windows Outreach Team- IT Pro Windows for IT Pros on TechNet
    It was a permissions issue! Thanks so much Bruce!
    I checked the permissions for the folder mentioned above and TrustedInstaller only had List Folder Contents and Special Permissions. So I granted granted Read & Execute to TrustedInstaller and tried installing again...
    1) double clicked the installer.
    2) once it said Initialisation was complete, I checked the permissions again and it had re-set them to as before, so I granted Read & Execute to TrustedInstaller again
    3) Installation was successful.
    Not really sure why this happened as it doesn't make sense but it's working now :-)

  • "The system cannot find the path specified" error when installing a network printer running Win 7

    Some of the end users are having issues when trying to install network printers. We have created a portal where they can locate the printer they want to connect to, click connect, and the printer will download with the correct drivers on their PC's. The
    entire company is running Win 7 for their operating system. One end user in particular has had issues installing multiple printers from the portal, when I go to test installing these same printers on my PC, they all install successfully. trying to figure out
    why some end users hav issues with installation and others do not. They will get the error, The system cannot find the specified path. Any help would be great

    Hi JeffWilko,
    What is your current situation?
    To receive better analyzation, please provide more details?
    1. Could you explain a bit about the sentence ‘installing multiple printers from the portal’ ?
    2. Check the event viewer and share us the related error log.
    Please take the following steps for troubleshooting:
    1. Ping the printers
    2. Check if there are network firewall to block the access
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • "The system cannot find the path specified." error message when trying to start instaling a software

    hi
    when i trying to install a software for example CAD Viewer software, my windows show this message : The system cannot find the path specified
    i use the windows 7

    Zohre
    What version of the CAD software are you trying to install?  Is it compatible with win 7?  Older installations (on older OS) installed to a different default location that win 7 does not have.
    Wanikiya and Dyami--Team Zigzag

  • Cannot Install this Hardware - The system cannot find the file specified.

    I got an 8G ipod touch last week. When I plug it into USB port on my PC, a Found New Hardware Wizard box pops up with "Cannot Install this Hardware", "There was a problem installing this hardware: Apple Mobile Device USB Driver", "An error occurred during the installation of the device", "The system cannot find the file specified.", "Click Finish to close the wizard.". If I go ahead and click finish, the device disappears and a couple of seconds later tries to install again and the box pops up again. However, if I leave the box alone, the ipod does actually appear in itunes and I can sync music to it, so all is not lost Any ideas though how to stop this error box popping up? The USBAAPL.SYS driver exists - I don't know what file it cannot find. Thanks.

    Hi and welcome to Discussions,
    if you have a Leopard OSX DVD you can use it to install the BootCamp 2.0 drivers and later use the BC Update 2.1 for XP to further update the drivers.
    If not (still running OSX Tiger) there are two possibilities:
    use this direct download link for the latest ATI/AMD Mobility Driver package http://ati.amd.com/online/mobilecatalyst/
    or use the ModTool found here http://www.driverheaven.net/modtool.php in conjunction with the ATI/AMD Desktop Driver package.
    You should also consider getting and installing the latest (June 2008) DirectX 9 package from Microsoft.
    Hope it helps with your gaming problems.
    Stefan

  • Error "The System cannot find the specified" when installing XI3.1 FP1.3

    Error "The System cannot find the specified" happened when installing XI3.1 FP1.3 to client machine, however the installation is OK to server.
    After the error, go to Control Panel -> Add or Remove Programs, and observe.
    BusinessObjects Enterprise XI 3.1 Client Tools is installed,
    but BusinessObjects Enterprise XI 3.1 Client Tools Japanese Language Pack is not.
    And Language Pack install log is not written.
    The same error happened when installing .net2.0.
    The installation for FP1.2 is OK.
    Would you tell me what reason probablely this issue is?
    Thanks.

    Hello Sarah,
    I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
    This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • VSTO 2010 Addin installed on Outlook 2007 Machine: Giving binding error - 0x80070002. The system cannot find the file specified (Fusion Log).

    Fusion log:
    The operation failed.
    Bind result: hr = 0x80070002. The system cannot find the file specified.
    Assembly manager loaded from: C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\clr.dll
    Running under executable C:\PROGRA~1\MICROS~2\Office12\OUTLOOK.EXE
    --- A detailed error log follows.
    === Pre-bind state information ===
    LOG: User = XP-2007\Administrator
    LOG: DisplayName = Blue Jeans Outlook Addin, Version=3.0.233.24954, Culture=neutral, processorArchitecture=MSIL
    (Partial)
    WRN: Partial binding information was supplied for an assembly:
    WRN: Assembly Name: Blue Jeans Outlook Addin, Version=3.0.233.24954, Culture=neutral, processorArchitecture=MSIL | Domain ID: 2
    WRN: A partial bind occurs when only part of the assembly display name is provided.
    WRN: This might result in the binder loading an incorrect assembly.
    WRN: It is recommended to provide a fully specified textual identity for the assembly,
    WRN: that consists of the simple name, version, culture, and public key token.
    WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue.
    LOG: Appbase = file:///C:/Program Files/Blue Jeans/Outlook Addin/
    LOG: Initial PrivatePath = NULL
    LOG: Dynamic Base = NULL
    LOG: Cache Base = NULL
    LOG: AppName = OUTLOOK.EXE
    Calling assembly : (Unknown).
    ===
    LOG: Start binding of native image Blue Jeans Outlook Addin, Version=3.0.233.24954, Culture=neutral, PublicKeyToken=null.
    WRN: No matching native image found.
    LOG: IL assembly loaded from C:\Documents and Settings\Administrator\Local Settings\Application Data\assembly\dl3\LZMMEM67.CTT\397DNQ77.1W9\c337c5e7\0023f77f_891ed001\Blue Jeans Outlook Addin.dll.
    The required correct settings file is present in the location C:\Program Files\Blue Jeans\Outlook Addin but the .NET created user.config in AppData have wrong entries. The machine is installed with VSTO 2010 and .NET 4.0 Client Profile. Also the KB 976477 is
    already installed the registry entry EnableLocalMachineVSTO (KB 976811) is made. May someone please give me a clue on why the user.config file is created with wrong entries and also, why this assembly binding error happening?
    Thanks in advance.
    Prasad

    this might help:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/2601334c-d5cb-4f51-a99a-4d8ea9217938/userconfig-file-problem-after-upgrading-to-outlook-2010-from-2007?forum=vsto
    VSTO Word add-in user.config lost every update

  • All my Storage giving "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)"

    I purchased Microsofts "All My Storage Pro" and so fare its been one disappointment after another but I won't go into all the problems I've had just the latest one. I was attempting to upload a file from my c:\Download folder to my OneDrive and
    received a "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)". Now I know the file is there because I just installed it from there, So whats the deal? and can I get my money back from Microsoft
    for this disaster of an app?
    Robert L. Massie

    I purchased Microsofts "All My Storage Pro" and so fare its been one disappointment after another but I won't go into all the problems I've had just the latest one. I was attempting to upload a file from my c:\Download folder to my OneDrive and
    received a "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)". Now I know the file is there because I just installed it from there, So whats the deal? and can I get my money back from Microsoft
    for this disaster of an app?
    Robert L. Massie

  • Error message on my development workstation: The system cannot find the file specified.

    Post Author: cseverin
    CA Forum: Crystal Reports
    Hi,
    I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database.  I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue.  The problem seems to be with Crystal Reports. 
    I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it.  I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them.  All worked fine. 
    To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report.  After doing this, the preview no longer worked.
    Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it.  In the code behind the page I wrote:
    Option Strict On
    Imports System.Data
    Imports CrystalDecisions.CrystalReports.Engine
    Imports CrystalDecisions.Shared
    Partial Class Reports
         Inherits System.Web.UI.Page
         Private objOpenFilesreport As OpenFilesReport
         Private rptOpenFiles As ReportDocument
         Private strLastErrorMessage As String = Nothing
         Private errLastException As Exception = Nothing
         Dim strFileKey As String
         Dim strJurisdictionCode As String
         Dim strStaffId As String
         Dim strReportId As String
         Private Sub ConfigureCrystalReports()
              Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
              Dim rptopenfiles As New ReportDocument
              rptOpenFiles.Load(reportPath)  <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports     folder of my project
              Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
              ConnectionInfo.DatabaseName = my database
              ConnectionInfo.UserID = login id of user
              ConnectionInfo.Password = user's password
              SetDBLogonForReport(ConnectionInfo, rptopenfiles)
              CrystalReportViewer1.ReportSource = rptopenfiles
         End Sub
         Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
             ConfigureCrystalReports()
         End Sub
         Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
              Dim myTables As Tables = myReportDocument.Database.Tables
              For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
                   Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
                   myTableLogonInfo.ConnectionInfo = ConnectionInfo
                   myTable.ApplyLogOnInfo(myTableLogonInfo)
              Next
         End Sub
    End Class
    I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it.  When I run the website in Visual Studio and click on the hyperlink I get the following:
    Server Error in '/MyTest' Application.
    The system cannot find the file specified.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
    &#91;COMException (0x80004005): The system cannot find the file specified.
    &#93;
       CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
    &#91;Exception: Load report failed.&#93;
       CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
       CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
       CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
       CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
       CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
       CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
       CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
       CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
       CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
       System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
       System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
    Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832 
    Any ideas, anyone?
    Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file.  I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries.  But how do I call these functions at the time the report is run?
    This is my first Crystal report written in .NET and I've been struggling with it for days now.  Any help would be most appreciated!
    Thanks very much!
    Chris Severin

    hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

  • Java.lang.Error: java.util.zip.ZipException: The system cannot find the fil

    I got maven 221 installed
    i got jdk 1.6 and 1.5 installed (have tested both)
    I have a strange error. All my co-workers can build but I cant. The only thing I can find is that I dont have installed BEA Weblogic but I dont want to have that installed. It should be able to run anyway.
    Could someone tell me what is wrong? If you need pom.xml I got that one as well.
    process-classes:
    [copy] Copying 4 files to C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-content
    [mkdir] Created dir: C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-jar
    [java] Creating an MJF from the contents of directory C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-content...
    [java] Compiling the files...
    [java] Creating the list.
    [java] Doing the compile.
    [java] WLMaker-SubProcess: : Exception in thread "main" java.lang.Error: java.util.zip.ZipException: The system cannot find the file specified
    [java] WLMaker-SubProcess: :      at weblogic.management.commo.BeanGenDriver.getManagementTempDir(BeanGenDriver.java:93)
    [java] WLMaker-SubProcess: :      at weblogic.management.commo.BeanGenDriver.main(BeanGenDriver.java:117)
    [java] WLMaker-SubProcess: : Caused by: java.util.zip.ZipException: The system cannot find the file specified
    [java] WLMaker-SubProcess: :      at java.util.zip.ZipFile.open(Native Method)
    [java] WLMaker-SubProcess: :      at java.util.zip.ZipFile.<init>(ZipFile.java:203)
    [java] WLMaker-SubProcess: :      at java.util.jar.JarFile.<init>(JarFile.java:132)
    [java] WLMaker-SubProcess: :      at java.util.jar.JarFile.<init>(JarFile.java:97)
    [java] WLMaker-SubProcess: :      at weblogic.management.commo.BeanGenDriver.getManagementTempDir(BeanGenDriver.java:90)
    [java] WLMaker-SubProcess: :      ... 1 more
    [java] WLMaker-SubProcess: : Stopped draining WLMaker-SubProcess:
    [java] WLMaker-SubProcess: : Stopped draining WLMaker-SubProcess:
    [java] BeanGen code generation failed
    [HUDSON] Archiving C:\hudson\jobs\albpm_ip-identity-asserter_-Build\workspace\pom.xml to C:\hudson\jobs\albpmip-identity-asserter_-Build\modules\dk.skat.ip.integration.albpm$ip-identity-asserter\builds\2010-11-2213-41-28\archive\dk.skat.ip.integration.albpm\ip-identity-asserter\1.2\pom.xml
    [INFO] ------------------------------------------------------------------------

    from my experience, using weblogic jars can be a pain if the full install is not on the local box.
    Note that you dont have to 'install' it. Just copy the directory.
    Reason is that the jar files have manifests with relative classpaths.
    For an example of horror take a look at the weblogic.jar MANIFEST's classpath entry.
    -Fred

  • I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start M

    I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start Menu, Task Manager, System Tray, or anywhere else. When I try to open a file, the site tells me Flash player is not installed. I have even downloaded it to a separate folder and ran the install with IE shut down completely. And Shockwave in ENABLED but in 32 bit .I have been trying to get this to work for about 3 weeks now.  HELP!!!

    Flash Player is a browser add-on, not an executable program.
    If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
    Note that the download is the player, not an installer, so you will need to make the file association manually.

  • Error message when starting: McShield.dll: the system cannot find the file specified - what do I do to solve this?

    When I start Firefox, the following message appears before the home page opens:
    "COMMONSHELL: McShield.dll
    The specified resource language ID cannot be found in the image file.
    McShield.dll: The system cannot find the file specified."
    I click OK, Firefox opens normally and everything seems to operate as expected, no further problems.

    hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

  • Upgrading to MBAM 2.5: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0.....the system cannot find the file specified.

    Upgrading from MBAM 1.0 to 2.5 on the Administration and Monitoring server (database server already upgraded). To upgrade the administration server, I uninstalled MBAM 1.0 -> Deleted the MBAM website from IIS manually -> Reboot -> Installed MBAM
    2.5. After upgrade if I go to selfservice portal via
    https://myserver.mycompany.com/selfservice, I get this error:
    Server Error in '/SelfService' Application.
    Could not load file or assembly 'System.Web.WebPages.Razor,
    Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its
    dependencies. The system cannot find the file specified.
    Description:
    An unhandled exception occurred during the execution of the current web
    request. Please review the stack trace for more information about the error and
    where it originated in the code.
    Exception Details:
    System.IO.FileNotFoundException: Could not load file or assembly
    'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral,
    PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot
    find the file specified.
    Source Error:
    An unhandled exception was generated during the execution of the
    current web request. Information regarding the origin and location of the
    exception can be identified using the exception stack trace below.
    Stack Trace:
    [FileNotFoundException: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.]
    System.Web.Mvc.PreApplicationStartCode.Start() +0
    [InvalidOperationException: The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
    System.Web.Compilation.BuildManager.InvokePreStartInitMethodsCore(ICollection`1 methods, Func`1 setHostingEnvironmentCultures) +12980619
    System.Web.Compilation.BuildManager.InvokePreStartInitMethods(ICollection`1 methods) +12980328
    System.Web.Compilation.BuildManager.CallPreStartInitMethods(String preStartInitListPath, Boolean& isRefAssemblyLoaded) +280
    System.Web.Compilation.BuildManager.ExecutePreAppStart() +172
    System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +1151
    [HttpException (0x80004005): The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
    System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12979668
    System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
    System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12819261
    Anyone know how to solve this? Thanks in advance

    Sorry for late response. I fixed the issue by installing the correct version of ASP .NET 4 from
    here.
    If .NET Framework 4.5 is already installed, also run aspnet_regiis -i from C:\windows\microsoft.net\Framework\v4.0.30319

  • "The system cannot find the path specified" error

    Hi, Thanks for taking the time and reading.
    I had to update an old report that was made in CrystalReports. I copied the rpt files and pasted them into a csharp solution in VS 2010.
    The report structure is of a Main report and 6 subreports. I have to run this Main report many times and feed it a different integer as a parameter.
    I can preview the report in report viewer perfectly. When i try to export the main report into a pdf format
    i get an exception. I have tried a few different formats and it spews the same error. 
    Oddly enough the export sometimes works if the report i am previewing has the "Save data in the report" check box checked. My guess is that this is cached. Also when i run just the subreports through my application, it works.
    Things i have tried:
      I installed: CRRuntime_64bit_13_0_13
      I installed: CRforVS_13_0_13
      Took a look at the Procmon and i could not find an access denied error
      Event Viewer has no detail.
      Changed Registry values of ConnectionDirectoryPath and ReportDirectoryPath to "c:\"
    Code:
      if (!Directory.Exists(filePath))
      Directory.CreateDirectory(filePath);
      string fileName = filePath + string.Format(GlobalVaraiables.FILE_SAVE_NAME, i);
      cryRpt.SetParameterValue(GlobalVaraiables.FUND_DATA_KEY_PARAMETER, i.ToString());
      cryRpt.ExportToDisk(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat, fileName);
    Error message:
      System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
        at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
        at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
        at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
        at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
        at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
        at FundDataPDFSaver.SaveReport.GenerateReports(List`1 l) in C:\Users\user.name.here\Documents\Visual Studio 2010\Projects\FundDataToPDF\FundDataPDFSaver\SaveReport.cs:line 74
    System Details:
    Windows 7 Enterprise N  64 bit
    ServicePack 1
    IDE:
    Visual studio 2010 .Net framework 4
    Application is set to run as "Any CPU"
    CrystalReports :
      dll's: C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.CrystalReports.Engine.dll
        C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.ReportSource.dll
        C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.Shared.dll
    Thanks for your help

    I don't see where you're ever setting the logons for the tables in the report and subreports.  The reports with saved data are working because they already have data in them.  The reports without saved data are not working because they don't know how to connect to the database.
    See the Database section here Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki for more information about how to set the logons.
    -Dell

Maybe you are looking for

  • I am trying to install this app on my macbook air and i am getting an error

    I am trying install iPhoto and I am getting this error message: "These apps can't be accepted on this computer Future updates of these apps can be found through Software Update."

  • Can I extend the 8 second time-out to watch video programs?

    using opensuse 11.4 videos from TV stations cannot be viewed continuously under firefox because of interruptions occurring approximately every 8 seconds.

  • How to hide a report

    Hi, I have a form and report on the same Apex page. Is there a way to only show the report when the user clicks on the "Submit" button. That way the report will only show up when the "Submit" button is clicked on with the form data. Thanks.

  • Ie white flash blink solution

    hi, just wanted to share that i've managed to get the menu to work well in firefox, safari and chrome but in ie6 and sometimes in 7 it was blinking a white flash when changing between the menu items. to solve it all i had to do is remove this line fr

  • Responsive Design with Animate and Reflow

    So here is an interesting question... If anyone knows how to do this I will be forever grateful I am trying to make a responsive single web page... I know I could do it all in animate but we want the text to be HTML and a few other things... So I mad