Won't load since July 14 update

My iphone 6+ won't load spotify since the upgrade yesterday - worked perfectly till then - I have seen others report same in the app review

Have you tried deleting and then reinstalling the Spotify app?

Similar Messages

App Store update number won't dissapear since iOS 8 update

App Store update number won't dissapear since iOS 8 update. After updating all apps on my iPhone this red circled indicating number would always disappear, now it remains..... Why the change? I'd rather this number disappear like it always has I don't need to know that 2 Aps have updated, only that there are updates available. After updating this indicating number disappears.

In your device Settings > iTunes & App Store, under Automatic Downloads, set Updates to On.
Your App Store app will now reflect the up-to-date status of your apps updates.

Apps won't load since I updated my iPad 4 to iOS 7

Just (reluctantly) updated my iPad 4 to iOS 7. Several apps are staying in the 'waiting' position. Have lost many and some won't load. My Words with Friends game is 'waiting' to load, yet, the App Store says it's loaded. Any suggestions would be much appreciated. Thank you.
Also, can I revert back to what I had before?

Fully close the App Store App. Double tap your home button which will bring the most recently used apps. You'll see the app icon below and a screen shot of the open app page above. With your finger, swipe the open app page upward and the app will close. It's a good idea to regularly close apps when yout using them.
Tap your home button once to bring back your home screen.
App store should operate normally again when you open it.

Why won't Zynga Mafia Wars pop ups load since Firefox 4 update?

In my mafia wars game the friends won't load.

Firefox 4 is having the same issue on Mac osx as well.

IBook G4 won't load after latest security update, repair doesn't work?

Hi I had the same problem as someone else in this forum:
"Last night I saw that my ibook G4 wanted to do a security update. I told it to do it, and the ibook has not started since. It reset itself after downloaded, but it just stays on the booting up screen, never actually booting up so I can use it. After about two hours of trying to boot up, I turned it off, and on again, and it still wont boot.
I really need suggestions as how I can fix it. Thanks
ibook g4 Windows 2000
Carolyn Samit
Posts: 8,431
From: Alameda CA Bay Farm Island
Registered: Aug 5, 2005
Re: G4 wont boot after latest security upgrade
Posted: May 22, 2009 2:51 PM in response to: voiletmay
Click to reply to this topic Reply email Email
HI,
Ok... you need to boot from your install disk.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If you cannot boot from your install disk, try booting in Safe Mode
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
If you have the original hard drive in this iBook, it was probably a 60GB drive? When you can do this, check to see how much available disk space there is.
Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better. Not enough available drive space can cause issues like you are experiencing.
Carolyn "
I tried restarting it after the repair (there were some things to repair and I tried to repair twice just to make sure it didn't miss anything) but it still won't load. It says its starting the OX system, but when the blue bar reaches the end, it doesn't do anything from there. I also left it on for hours and it did nothing. My mousepad still lets me move around the mouse, the caps lock key still lights up, as the num lock key. I tried safe mode but that won't load either...any other suggestions?

*" I also left it on for hours and it did nothing. "*
Your iBook needs to go in for repairs.
Carolyn

Acrobat Pro won't load since I reinstalled Photoshop

Had to reinstall Photoshop CS5 today. Acrobat Pro 9 now won't load. Says Suite Product Activation Needed. It asked that I start another component of the suite. I had Photoshop open and it would not load. Any suggestions are welcome. See attched alert image.

I hope this gets through, since I am now not able to even log in to my adobe account (even though I've been an Adobe customer for over 20 years). My user ID and password stopped working at 4:00 today. Was on the phone with adobe for hours, and they are not able to even get me access to my account or products that I bought from them.
Yes Adobe CS5. Tried restarting. Thanks, but didn't work. Adobe said I need to do a complete reinstall of CS5 to get Acrobat to work. I asked "Then why do you give the option of reinstalling apps individually?" No answer. That's when we discovered that I could no longer even access my account or download my purchased products. They said they are "elevating the matter" and I will here from someone in 24-48 hours. So apparently "elevating" means "We are hanging up now. Talk to you in a few days." Try explaining that to my clients.

Photoshop CS5 won't load since I installed Yosemite!

Since loading Yosemite, Photoshop CS5 won't load and I get this window!
I'm on an iMac 21.5 mid 2011.

It seems a lot of people are running it without a problem, just seems to be me that has this issue at the moment, I have just got CS5, but I need it and can't afford the stupid leasing system they now have. I just want the product I paid for to work, or I will have to find a similar system that I can simply buy and use, not pay out for every year!
I had this when Mavericks came out and it was sorted, something to do with Java, but can't remember what...

Safari won't load after latest software update

After the latest software update from Apple, Safari won't load. I've deleted the p.list and run OnyX to clean the system. It still won't load. This is a pain as Safari is my default browser and I have to get into Safari to change that. Has anyone else had this problem and fixed it?
Thanks!
Quicksilver G4 Mac OS X (10.4.5) 1.5Gb RAM

Welcome Pauline;
Actually you can change your default browser from within Mail, just go to Mail preferences and set the default browser to whatever you want. Unless you have cloned your system (before the update)which I heartily recommend,
you may have to use Pacifist to extract Safari from
the 10.4 installation package.
Hope this helps,
Miriam

FaceTime won't work since iso 6 updated to Iso 6.

FaceTime won't work since iso6 update. Every time since I have updated to Iso 6, FaceTime will not work. When I try to FaceTime, after about 30 seconds it tells me that the connection is lost! My iPad is wifi only. Help!!!!!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Safari pages won't load since Mavericks upgrade

Installed Mavericks a few days ago on my iMac and some really annoying bugs have been introduced to Mail (7.3) and Safari (7.0.6). I can't automatically add multiple addresses to emails anymore using the space bar; I have to manually type out certain addresses, add commas, etc. Certain webpages, including youtube and google, won't load on Safari. Chat support had me repair permissions with disk utility, clear cookies and reset safari, but none worked. It was also suggested that I do an SMC reset, a PRAM reset, and a safe reboot. I haven't done any of these, basically because I'm nervous about introducing any more wonkiness that I can't undo. I've been reading about similar problems with Mavericks for months now (I only upgraded because I needed it for Final Cut) , but I never see any solutions. Can anyone help me??? Thanks.

Go step by step and test.
1. Power cycle
     Power off the router. Unplug it from the wall. Wait a while.
     Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
     It will take a   while.
     Restart the computer.
     Start up in Safe Mode
     http://support.apple.com/kb/PH11212
2 Empty Caches
    1. Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
    2. Quit Safari if open.
    Option click the "Go" menu in the Finder menu bar.
    Select "Library" and then "Caches".
    Look for the folder 'com.apple.Safari"
    Right click "com.apple.Safari" and select "Move to Trash"
    Relaunch Safari.
3. Turn off Extensions if any, and launch Safari.
    Safari > Preferences > Extensions
4. Remove all third party addons, plugins and anti-virus software
    Run EtreCheck .
    https://discussions.apple.com/docs/DOC-6173
5. Deselect Proxies if selected.
   System Preference > Network > Advanced > Proxies Tab
   Under "Select Protocol", uncheck any box if selected.
   Click "OK" then "Apply"
Best.

Vuescan won't launch since App Store Updates 17 APR

Since installing the Updates released 17 April namely Aperture Update 3.4.4, Java for OS X 2013-003 1.0, EPSON Printer Update 2.14, iPhoto Update 9.4.3 my installed versions of Vuescan freeze on launch.
Anyone else?

I confirm that Ed Hamrick's updated VueScan v 9.2.14 completely solves the problem. I'd just like to record that his response to my support request was timely, courteous and effective. Well done, Ed!
I have to confess to having got my Mac Pro into a right mess as I attempted by fair means anf foul to revert to a pre-Epson Printer Drivers 2.14 update, with the result that I totally hosed my 'reference' volume and – what's more – even made the 2TB drive of which it is on one partition, not detected!
I've ended up by shutting down and disconnecting power to the Mac Pro and associated devices, emoving the 2TB drive – then on second thoughts putting it back in – and reconnecting power and re-booting. This time the drive and its partitions were seen, but I was plagued by odd Finder and App freezes … so, ended up by re-installing Mountain Lion and updating to current release etc. That done, everything is working as advertised. Took a lot of time, though, as does making bootable backups on one internal and two external drives.
Although my support request to Epson was auto-acknowledged, that has been follwed as yet by … a long silence!
Thanks be to Ed – and to all of you who have tried to help or shown an interest.

My App Store won't load since I upgraded the software, My App Store won't load since I upgraded the software

App Store won't load it says loading then just goes to a blank screen someone help please?????

Hello moirafromvirginia water,
The article linked below details a number of troubleshooting steps that can help restore your Mac's connection to the iTunes and App Stores.
Can't connect to the iTunes Store
https://support.apple.com/en-us/HT201400
Regards,
Allen

SOLVED Sqlitebrowser won't load since update changed dependency to Qt5

I think this is the first qt5 program I've tried to run. I didn't even have the qt5-base package until sqlitebrowser updated and pulled it down as a new dependency. Anywhere here's the error I'm getting which seems to be common among qt5 apps but I can't find a solution:
$ sqlitebrowser
This application failed to start because it could not find or load the Qt platform plugin "xcb".
Available platform plugins are: eglfs, kms, linuxfb, minimal, minimalegl, offscreen, xcb.
Reinstalling the application may fix this problem.
Aborted
I already have the xcb packages though is what confuses me
$ pacman -Qs xcb
local/cairo 1.12.16-2
Cairo vector graphics library
local/lib32-libxcb 1.10-2
X11 client-side library (32-bit)
local/libxcb 1.10-2
X11 client-side library
local/xcb-proto 1.10-2
XML-XCB protocol descriptions
local/xcb-util 0.3.9-1
Utility libraries for XC Binding
local/xcb-util-image 0.3.9-1
Utility libraries for XC Binding - Port of Xlib's XImage and XShmImage functions
local/xcb-util-keysyms 0.3.9-1
Utility libraries for XC Binding - Standard X key constants and conversion to/from keycodes
local/xcb-util-renderutil 0.3.9-1
Utility libraries for XC Binding - Convenience functions for the Render extension
local/xcb-util-wm 0.4.1-1
Utility libraries for XC Binding - client and window-manager helpers for ICCCM
I'm running KDE if it matters. Since KDE is qt4 based, maybe there's a conflict there. Really not sure at this point.
Last edited by weirddan455 (2014-07-03 10:30:33)

Korrode wrote:
Do you have libxkbcommon-x11 installed?
EDIT: https://bugs.archlinux.org/task/40569
The nice folks on IRC helped me conclude that that was indeed the package I was missing and installing it solved my problem. I'm thinking about filing a bug report on qt5-base suggesting they add libxkbcommon-x11 as a dependency (right now it's only an optional dependency) as it's very small, doesn't have many dependencies of its own, and nearly everyone running qt5 at the moment is going to be running X
If they're trying to make qt5 not dependent on X for Wayland support, they're already failing anyway because qt5-base depends on libxrender and libxi which both depend on libx11. Libxkbcommon actually does not depend on libx11 and it's only dependency besides glibc (installed on nearly 100% of Arch systems) is the 5MB xkeyboard-config with no dependencies of its own and installed on 94% of Arch systems as it's required by xorg-server-common.
EDIT: And bug reported:
https://bugs.archlinux.org/task/41055
EDIT 2: Marking this as solved. The initial bug report for adding the dependency to qt5-base was denied so I filed one for sqlitebrowser and the developer added the dependency there.
https://bugs.archlinux.org/task/41056
Last edited by weirddan455 (2014-07-03 10:29:29)

App Store won't load since updating to Yosemite

Since I updated to OS X 10.10 Yosemite, the App Store will not load. It just sits there with the loading icon on the navigation bar.

Hi colinvignoul,
Welcome to the Apple Support Communities!
If the App Store is not launching on your computer I would suggest using the troubleshooting information in the attached article to help resolve the situation.
OS X: "Cannot connect" or "Cannot connect to the App Store. An internet connection is required"
Have a great day,
Joe

I pad APPs won't update or new ones won't load since IOS 8

Since IOS 8 my IPad 2 will not update APPs or allow new APPs to be loaded...it just freezes and doesn't load. This was never a problem with IOS 7

Take offany automatic downloads you have. If any are spinning tap them to delete the download process. Power down and restart your device, then tap to download each app ... manually ... and don't have more than two going at the same time.

Won't load since July 14 update

Similar Messages

Maybe you are looking for