Won't mount, file system not recognised

I'm trying to download firmware from Netgear's website but when I try to mount the files they say the file system is not recognised.
I'm trying to get hold of Netgear as well but I thought someone here might have some suggestions too while I wait for a response from Netgear.
The two files I've tried so far are:
http://kbserver.netgear.com/release_notes/D102713.asp
ftp://downloads.netgear.com/files/dg834v2_1022.zip
http://kbserver.netgear.com/release_notes/D103044.asp
ftp://downloads.netgear.com/files/dg8343_0132.zip

My mistake. The file I was trying to mount isn't intended to be mounted. You're actually meant to upload this .img file directly to the modem.

Similar Messages

RMAN to Disk (shared mounted file system) then secure backup to Tape

Hi
This is a little away from the norm and I am new to Oracle secure Backup.
We have several databases on physically separate servers, all backup to a central disk (a ZFS shared file-system).
We have a media server also with the same mounted file-system so it can see all of the RMAN backups there.
Secure backup is installed on the media server and is configured as such.
The question I have is I need to backup the file system to tape where all the RMAN backups live, I have configured the data set but I get file permission errors for each of the RMAN backup files in the directory.
I have tried to change these permissions but to no avail (assuming it is just a read write access change that is needed - but this may be a problem in the long run). What is the general process for backup of already created RMAN backups sat in a shared area? I know its not the norm to do to disk then to tape backups but can this be done? I would have installed Secure backup client on each server and managed the whole backup through secure backup but this is not possible I must do the to tape from the file system, any advise and guidance on this would be much appreciated.
Kind regards
Vicky
Edited by: user10090654 on Oct 4, 2011 4:50 AM

You can easily accomplish a very streamlined D2D2T strategy! RMAN backup to disk...then backup that disk to tape via RMAN and OSB. Upon restore, RMAN will restore from best media disk or tape based on where files are located.
Donna

PSE 6.0 on Mac: File system not supported

Downloaded PSE 6.0 as root on 10.5.6, PPC G5 w/ Mac OS Extended (Case-sensitive Journaled) FS. When I began install, got "file system not supported." Any ideas? Thanks.

Ah, yes, then you're one of the few people who come here who've done that who have a reason. The average person who has trouble resulting from this just randomly chose that option when formatting (lots of people think they won't be able to use capital letters in file names if they don't). Unfortunately, just for future reference, I believe this is a problem with all adobe products. I know it's the same with Photoshop.

Boot up - Error Message: "File System not clean"

<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [tiki-view_forum_thread.php?locale=en-US&comments_parentId=667528&forumId=1]
Thanks - c</blockquote>
== Issue
==
I have another kind of problem with Firefox
== Description
==
At start up displays error message: File System not Clean"
== start up computer
==
== Troubleshooting information
==
WebOfTrust, AdBlock Plus 1.2, Ubuntu Firefox Modifications 0.7, Firefox Universal Uploader (fireuploader) 0.4.1, Foxytunes 4.0.6
== Firefox version
==
3.0.19
== Operating system
==
Linux
== User Agent
==
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.19) Gecko/2010040116 Ubuntu/9.04 (jaunty) Firefox/3.0.19 GTB7.0
== Plugins installed
==
*-The default plugin handles plugin data for mimetypes and extensions that are not specified and facilitates downloading of new plugins.
*The demo print plugin for unix.
*Shockwave Flash 10.0 r45
*DivX Web Player version 1.4.0.233
*The Totem 2.26.1 plugin handles video and audio streams.

http://ubuntuforums.org/

I downloaded a video from youtube and to play it on Quicktime Player but is says the file is not recognised

I need a video for an assigment from youtube, but when i download it, it says that the file is not recognised
What can i do?
Tips? Help?
Marcus

You can try installing the free Flip4Mac
https://www.macupdate.com/app/iphone/17787/flip4mac-wmv-player
or alternatively download VLC Player which plays many more formats than Quicktime.
http://vlc-media-player.en.softonic.com/mac
Cheers
Pete

Zfs destroy DOES NOT CHECK NFS mount file-systems

I asked this question twitter once and the answer was a good one, but I did some checking today and was surprised!!
# zfs destroy mypool/home/andrew
The above command will destroy this file-system no questioned asked but if the file-system is mounted you will get back the Device busy and if you have snapshot then they will be protected as well
server# zfs destroy mypool/home/andrew
cannot unmount 'tank/home/andrew
server# zfs destroy dpool/staff/margaret
cannot destroy 'dpool/staff/margaret': filesystem has children
use '-r' to destroy the following datasets:
dpool/staff/margaret@Wed18
dpool/staff/margaret@Wed22
BUT?
server# zfs destroy dpool/staff/margaret@Wed18
server# zfs destroy dpool/staff/margaret@Wed22
NFSclient# cd /home/margaret
NFSlient# ls -l
drwx------+ 2 margaret staff 2 Aug 29 17:06 Mail
lrwxrwxrwx 1 margaret staff 4 Aug 29 17:06 mail -> Mail
drwx--x--x+ 2 margaret staff 2 Aug 29 17:06 public_www
server# zfs destroy dpool/staff/margaret
server#
GONE!!!
I will file a bug report to see what Oracle say!
Comments?
I think there should be a hold/protect of file-systems
# zfs hold dpool/staff/margaret
Andrew

The CR is already filed:
6947584 zfs destroy should be recoverable or prevented
The zfs.1m man page, which covers the mounted case and the ZFS admin guide are pretty clear
about the current zfs destroy behavior.
http://docs.oracle.com/cd/E23824_01/html/821-1448/gamnq.html#gammq
Caution - No confirmation prompt appears with the destroy subcommand. Use it with extreme caution.
zfs destroy [-rRf] filesystem|volume
Destroys the given dataset. By default, the command
unshares any file systems that are currently shared,
unmounts any file systems that are currently mounted,
and refuses to destroy a dataset that has active depen-
dents (children or clones).
I'm sorry that you were surprised.
Accidents happen too, like destroying the wrong file system, so always have good backups.
Thanks, Cindy

Disk Image Won't Mount - Reason: Device Not Recognized

As I've searched the discussion forums, I've seen plenty of postings for "Disk Image Won't Mount" and for "Device Not Recognized" but not the way I'm seeing it on my laptop.
After a backup and restore, my mac will no longer mount any... and I mean any images. I have downloaded several security or software updates from different vendors and each .dmg file will not mount. I still have the .dmg files in hopes that after I get this problem solved, I'll be able to install them, but...
It always gives the same reason for not mounting and I'm at a loss on what to do next. I've run Software Update hoping it will be a quick fix, but have had no success.
Any suggestions?

I have a similar problem. Using FireWire disk mode, I put a disk image of my entire iBook onto my iMac as a back-up. (For an unrelated problem, Apple told me I needed to erase my iBook completely and do a clean install of the system.) Well, I screwed something up. I don't know what exactly--maybe I didn't "put away" the device correctly, but the next day when I flipped on my iMac, the disk image of my iBook was just gone, and not to be found anywhere. I finally succeeded in restoring the image using TechTool, which scanned the entire volume of the iMac for directory information. And it's all there, because the img file is more than 10GB. But when I double-click on it, I get the following error msg: "The following disk images failed to mount...reason--not recognized." I've checked the app it's supposed to open with, permissions, and run Disk Utility volume repair. No dice. Any ideas??? Did I mention that this is EVERYTHING I had on my iBook???

Store documents in local machine of file system not in sap dms

Hi,
Can i store documents in local machine not in sap Database . Client will not use content server for storing document.
so how to store document in local file system n how to configure ?
please help.
Dipak.

Hello Sir,
When I try to check in in storage as 'VAULT' it send error 'Attempt to set up connection to failed'
attaching screen shot of error
I customize in DC20 for Vault:
For: "Define data carrier type "vault""
Data carr. type = ZD
For: "Define vault"
Data carr.name = ZDC_TEST
Data carr. type= ZD
Desprition = Test
Vault path = \\10.181.210.10\_SAP Practice\SAP DMS\DMS_Data_carrier -> this is the network path.
For: "Define data carrier type "server, front end"
Type (data carr. type) = DC
Description = Frontend test
Path = c:\temp\
For: "Define mount ponts/logical drive"
Data carr. = Default/ZDC
Prefix for access path = c:\temp\
Please tell me if have configured any wrong configuration or need to add any additional configuration
Thanks.
Dipak.

Want to be able to mount file systems in my computers at home

Hi,
I have 2 apple computers , a mac pro and an ibook and I want to be able to mount the file system from one to the other to transfer files. What software do I need to do this?
I suppose I could use an FTP server just to transfer files is there one for free?
Or if I actually want to mount the file system , what do I need?
thanks
-Malena

As sig said, firewire is a really good way to do this. It is one of the easiest and fastest and most painless ways to do this.
If it is not so convenient for you to tether up one computer to the other via firewire, if the computers are on the same home network, enable personal file sharing (Sys Prefs > Sharing > Services) in at least one of them. Then you should see it on the other computer when you do ⇧⌘k in the Finder. Double-click on it and its icon should mount on your desktop. Open it, then drag and drop the files. If on the same home network and you enable ftp or remote login (Sys Prefs > Sharing > Services again), you can do it from the command line, no extra software required.
If they are not on the same network, e.g., one is at work and the other is at home, this can still be done fairly easily and fairly painlessly in a hack-proof manner by tunneling your file sharing port through secure shell. If you want to do it that way, that's a bit more involved to initially set up, but really not difficult to do. Post back if you want help doing that.

Cannot mount file system

Hi,
I have had great advice on this board, and thought maybe someone could help me out. I am following the instructions on installing Enterprise Linux on VMServer. I have just about completed the install, but have ran into the following error message at this step of the instructions:
Format the file system. Before proceeding with formatting and mounting the file system, verify that O2CB is online on both nodes; O2CB heartbeat is currently inactive because the file system is not mounted.
# /etc/init.d/o2cb status
Module "configfs": Loaded
Filesystem "configfs": Mounted
Module "ocfs2_nodemanager": Loaded
Module "ocfs2_dlm": Loaded
Module "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking O2CB cluster ocfs2: Online
Checking O2CB heartbeat: Not active
You are only required to format the file system on one node. As the root user on rac1, execute
# ocfs2console
1. OCFS2 Console: Select Tasks, Format.
2. Format:
* Available devices: /dev/sdb1
* Volume label: oracle
* Cluster size: Auto
* Number of node slots: 4
* Block size: Auto
3. OCFS2 Console: CTRL-Q to quit.
Mount the file system. To mount the file system, execute the command below on both nodes.
# mount -t ocfs2 -o datavolume,nointr /dev/sdb1 /ocfs
On rac1, the command to mount the file system works great, no errors. But on rac2, I get the following error:
[root@rac2 ~]# mount -t ocfs2 -o datavolume,nointr /dev/sdb1 /ocfs
ocfs2_hb_ctl: Bad magic number in superblock while reading uuid
mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operations not
permitted"
Does anyone have an idea, I have followed the instructions to the letter, and this is the first error that has me stopped.
Thanks,
Zach

Hello -
I installeded and configured ocfs2 on one of my nodes in my Linux cluster. However, when I run this command on the first node (2 nodes in my cluster):
/etc/init.d/o2cb status
I see the following heartbeat error:
Driver for "configfs": Loaded
Filesystem "configfs": Mounted
Driver for "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking O2CB cluster prycluster: Online
Heartbeat dead threshold = 31
Network idle timeout: 30000
Network keepalive delay: 2000
Network reconnect delay: 2000
Checking O2CB heartbeat: Not active
Any ideas why I would see heartbeat as inactive? Also when I try to make the cluster filesystem online on my other node, I get this error:
Starting O2CB cluster prycluster: Failed
Cluster prycluster created
Node jtcperfloradb01 added
o2cb_ctl: Internal logic failure while adding node jtcperfloradb02
Stopping O2CB cluster prycluster: OK
Any help would be greatly appreciated!
Thanks,!

System not recognised after failed 10.6.6 update

Hi,
A colleague of mine had an error while installing 10.6.6 on a MacBookPro; I was not able to understand which kind of error, anyway now I'm trying to save the situation.
If I just try to boot, after some minute a stop sign appears in place of the apple.
Disk utility does not report any error.
If I look at the disk as firewire target, files are there, plus an unexpected deferred install folder.
If I try to update from combo, I'm not allowed, perhaps because the system is not recognised.
The same if I try to downgrade to 10.6.3 from the original disk: I'm not presented with Archive&install, preserve user and network option that would be good for that. I can only install as if the disk is new, but I would prefer not to loose contents. What if I go this way? User files remain available?
No Time machine backup available too. I could copy files on another disk, this is possible through firewire, but if possible I would avoid to reconstruct configuration by hand.
Thanks.

Final update: I surrendered. I tried to cancel some of the folders in the target disk, but I was not able to install the system over. So I saved the user home folder, formatted and installed from zero. I felt like a Windows user .

All downloads failing to mount and iTunes not recognising iPod!

My iBook G4 (Model No A 1055) needs alot of updates however i can't install anything. It downloads to the Desktop fine but when i go to open the attachment so i can actually install it a message comes up saing "The following disk images failed to mount" and the reason is a "corrupt image". I have tried to do this with Firefox, iTunes and Adobe and they all say the same!
I also now have issues with iTunes (7.2) which is all of a sudden not recognising my iPod shuffle (2nd gen). It doesn't come up in devices or anything when plugged in my iPod shuffle will just flash orange a few times and then nothing. I have tried to connect it to another (and much newer) Mac computer however it doesn't recognise it on there either.
Has technology just got so good my lappy is basically extinct and i need a new one or is there something i / Apple can do to help get me up to date with everything? Any help and feedback would be really appreciated.
Thanks
Louise

if you are running OS 10.3, it's pretty much obsolete
you can try getting OS 10.5 installed, but it can slow down the computer, 10.4 is not much use anymore either.

Limitations: Mounting File systems

Hi,
We have a requirement to communicate 30 odd application system through XI.
Mostly they are File to SAP or viceversa scenario.
Instead of using FTP Transport protocol, we are planning to use NFS as FTP goes heavy on performance.
Is there any limitation on mounting maximun file systems on XI(on unix) server.
Also suggest the best practice(NFS or FTP) for these kind of scenarios where volume of data and number of interfaces are very high.
Best Regards,
Satish

..."I understand the use of /etc/fstab is now deprecated."...
This is true - but they have been saying that since at least 10.3. Well, "/private/etc/fstab" still working fine in 10.5.1 so I don't imagine there will be a problem continuing to use it for the time being.
In Leopard, it looks like the information is automatically imported into "DirectoryService" under "/mounts" so it might also be possible to configure the mountpoints from there...

File system not accesible when downloading adobe CS5

I am trying to download my adobe standard CS5 software on my new computer. While using download manager as suggested by the program, i get an error message saying that there is a problem with entering the computers file system. I should check whether the file system is accesible or not. How do I solve this?

Hi Hokus Pokus
Please download CS5 Trails from below link : http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
Follow the instructions to Start your Download ...
Use your Serial Key to Activate them ....

Creation of oracle directory structure on mounted file system in linux

Hi,
I need to use datapump utility for which directory structure would be required. since my dump files are stored another system i usually mount the file system, can i create oracle directory structure on mounted filesystem in linux? do suggest urgently. thanks in advance.

Yes you can why not

Won't mount, file system not recognised

Similar Messages

Maybe you are looking for