Won't print 8 1/2 x 11 prints to my Canon Pro

E. 11 It wont let me print an 8 1/2x11 to my Canon pro printer. 4x6s it will print fine. The response is " phtotshop cannot print this document". Please help

Can your printer print on A3 paper size? If not then 8.5 inches (width) may be a bit big for your printer.

Similar Messages

Turning off color managment in Canon Pro-10 printer driver

Hi,
I am using Lightroom 5 to print to a Canon Pro-10 printer. How do I disable the color management in the printer driver. I have selected the appropriate canon PRO-10 profile in Lightroom and it says to turn off color management in the printer driver dialogue box but I don't see where / what to do

"my monitor has been calibrated"
I hear this all the time. It is the main reason I don't like all the calibration gadgets out there. You need to "calibrate" your monitor to what your printer is printing. Not some spec some gadget thinks it should be.
You need to know what the bias of the printer is. In this case Canon has put a reddish bias in it's printers to simulate a warm look. This condition will not be accounted for in calibration software or monkeys.
Get your brightness, contrast and grey-scale right and the rest will take care of itself. You can do the necessary corrections in LR to make up for, or leave as is, the warm tone from the printer.
BTW, you should be working in AdobeRGB or higher. Factoid, you can not get every color to match. This is not possibile. You are dealing with two completely different mediums. Light and dyes. Adjusting any color effects other colors as well.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

HT1893 After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer. The printer is working. What do I have to do to be able to scan again?

After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer. The printer is working. What do I have to do to be able to scan again?

Often, you have to download updated vendor software drivers when you switch operating systems. HP doesn't list a C5500 on their web site, however, here's the link to the OS X 10.6 C5540 software. If you have one of the other C55xx models, look for the updated driver/scan software on their software/driver download section of HP.Com.

Remote laptop won't print to new HP4622 wireless printer

My new HP 4622 won't print from wife's laptop (Compaq Presario CQ-60-224NR w/ Windows Vista) in another part of the house on my home Centurylink DSL network with very good connectivity. I have the printer installed at my desktop (Gateway Microsoft XP SP3) and it prints fine from the desktop. Does the printer software also need to be installed on the laptop? I sent a .jpg file to the printer from the laptop and it printed one line of unicode? code per page until I cancelled the job from the print queue. I have gone thru the installation guide a couple of times and nothing is fixed. Test results say that everything passed and install is successful. I downloaded and tried the print doctor wizard and it says no problems found. I have McAfee total protection running, could there be a firewall problem? I'm not sure about enabling ports or that sort of thing. I dumped a perfectly good Lexmark X7170 all-in-one because it wasn't wireless and we couldn't get it configured to print peer-to-peer. Now I have a new wireless printer and con't get to print remotely either. Hope you can help. Let me know if you need more info. Thanks.
This question was solved.
View Solution.

Hi Ken,
I would recommend giving the printer a static IP address for the wireless connection (not USB):
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you will have delete and re-add the printer on your computer. Do it this way:
0. Go to Start > Control Panel > Devices & Printers and delete all instances of the printer.
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
2. Click >> Start >> Control panel >> Devices & Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
If you're still experiencing issues try changing the channel on your router to 11 and the encyption to WPA.
Say "Thanks" by clicking the blue Kudos star in the post that helped you.

Won't Print to Kodak 1400 Professional - "Printing" never ends

Hi - Using MacBook Pro 17" and Aperture. OS 10.4.x. Out of box, new Kodak 1400 Professional Printer worked fine, and printed several great pictures. A week later, I was unable to print anything at all. Printer Window shows "PRINTING" and the twirling barber pole thermometer, but it NEVER prints however long I wait and no error message.
I've opened and closed printer, restarted printer and computer, checked that the firmware is up to date, re-set the paper in tray, etc. ALSO, it won't print JPGS from Preview, or apparently anything.
What could have happened?
Fix?
David Ferleger
email [email protected]

I have no idea if this will help anyone, but it helped me. I had my Kodak 1400 working with no problems for quite a while. I never really printed much, but I did now and then. About two months ago, I ran out of paper and didn't purchase any more for a while. I finally got my two packs (so I could get the third free!) about two weeks ago. I now have two clients who need prints, a total of about 85 8x10s.
So, I setup the printer, installed the driver, and started going about my business. Setup the prints, got it all rolling, and prepared to run the first print through as I've found the first print on a new ribbon is a dud due to dust. Nothing happened. It went to "printing" and stared at me as though it were as dumbfounded I asked it to print as I was that it WASN'T printing.
That was yesterday. Since then, I've removed the driver about a bajillion times. Googled this, FAQ'd that, held my tongue appropriately, used different USB cables, different USB ports, removed the other printer, blahdy blahdy blah. Then, this afternoon while I was somewhere between awake and sleep, it hit me: why not try an older driver. I thought about it, and realized that since the last time I was using the 1400 successfully, I'd reinstalled OSX. What were the odds that when I downloaded the driver the last time, I downloaded the "wrong" driver and got the old one (1.0.2) instead of the NEW correct driver, 2.0.0.
So, I removed the old driver from everywhere I could. Restarted the computer. Installed 1.0.2, cliked print, and felt my heart sink as the red Error light blinked intermittently with the "Media" light. Shot through the heart... then, all of a sudden, it sucked in some paper, and started printing! Problem solved!
So, if you still can't print, try using 1.0.2. It might not work, but if you can't print with 2.0.0, what harm can it do? NONE! Muhahahaha. I feel so adventurous for using an old driver. (yes, this is what now counts as "adventure" for me... now go away or I shall taunt you a second time.)
Hope that works for someone!
--Mike
MBP 2.0ghz Mac OS X (10.4.7)

Print Apps won't print with C510a eStation. Prints thin line at top of page.

My C510a eStation printer will not print using the Print Apps. It just prints a thin line at top of page. Everything works fine until I print.
All other print functions work. It prints from computer via WiFi. It prints when I send an email to it. It copies via the Zeen. It just won't print using the Print Apps.
Does anyone else have this problem? What is the solution?
12/23/2010 3:00PM. I just got off the phone with an HP engineer. She said that the eStation is still in the TESTING phase and to call to report problems so they can improve the product. (I would have thought the product would have been fully tested before being released to the public!)
She had me reset the Zeen display by holding down the volume keys while powering up. This erased everything that had been done on the Zeen by me and resulted in no HOME screens, which will have to be set up by me. The only app at the bottom of the blank home page was Yahoo!. Even the printer app was missing. I had to move it from the app tray to the home page. Now, I have to spend hours, again, setting up the Zeen.
After the reset, the printer apps seem to work now. The Zeen will copy using the printer app. My computer still seems able to print and scan to/from the eStation.
The eStation C510a eStation printer and Zeen display are very exciting. However, they are not for someone not willing to spend the time to get it to work properly. If you have a cell phone, be prepared to use up a lot of minutes while on support.
The HP engineer said that it will soon have a new release of Android operating on the Zeen which will allow it to be faster.
This question was solved.
View Solution.

I have decided to return this printer to the store as it just has too many problems. HP has essentially told me they will not issue updates to solve the problems. I hate this, as I really loved the product.

I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS

I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS
It does ope when selecting PHOTOSHOP MANAGES COLOURS . This is first time in 7 year this has happened.
Any one with ideas/

What is your screen resolution?
What operating system?

Why won't my Mac allow me to print my whole iTunes wish list?

I have an HP Officejet Pro 8600 Plus, and I'm trying to print my iTunes wishlist. For some reason, the whole list won't print. I have about 325 songs in my wishlist, but I can't print but 115. I have changed all the printer settings possible but can't find a solution. Does anyone have a solution to this problem?

Thank you, Advance 23, for your interest. I am not generally having a problem printing multiple pages. I am, however, having a problem specifically printing my entire iTunes wish list. I do not receive an error message. When I click on print, it shows 13 pages to be printed. It does print 13 pages, but only the first 41/2 pages contain part of the list. The rest of the pages are blank. "All" is selected as the number of pages to print. I'm not sure what you mean by a program from which I am printing the list. I just have my HP printer set up as my printer for my Mac, and it prints all of my documents. What I have done instead of printing the list is take screenshots directly from the wish list and printing them. I cannot copy and paste it into Pages or TextEdit because only the first 41/2 pages of the list show up in the pages to be printed section. It would be really great if you could solve this problem.

Won't print information sheet for network printer

I have accessed my printer on two different computers wirelessly. I need a "printer code" for other devices, which apparently is printed on some "sheet"....which won't print. I get a message that "a web services information sheet will be printed...." but nothing ever comes out (but documents do so I know it works.)
How do I get this information sheet to actually print?

Thank you SO much for your quick response! I think it kept dropping the connection intermittently and screwed up the request to "enable" the network printing. (That was on the page where you enter the ip address in a webpage) so when I asked to print that info page, it just lost the request every time.
I did google around a little and reset the router and the printer by replugging in the printer. I also reset some automatic IP stuff to manual setting (I am REALLY not familiar with this kind of thing...can you tell!? ha ha!!!) Anyway, I followed the instructions for a different printer (with a similar connection issue) here on the hp site...the DNS thing seemed to make the difference:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/HP-Photosmart-5510-Printer-Wireless-Net...
I hope other non-techies like me can follow those instructions too. That 8.8.8.8. and 8.8.4.4. stuff and the re-plugging in seemed to somehow make it work!

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC??

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC?? Checked for software updates and are none. Talked with HP help and they say it's an Apple problem

I noticed that you said you uninstalled the printer, but you didn't mention resetting the print system. Resetting the print system will reset the drivers the Mac has installed and make them work like they should. Give this a try and see if it gets the printer working like it should. The document below will expalin more about doing this.
Basic Printer Troubleshooting Steps for Mac
If that doesn't help, see if you are using the AirPrint driver, or the printers driver. By default 10.8 uses the AirPrint driver if the printer supports it, so I'm betting that's the driver you're using. If it is, try using the driver for the printer itself. To do this, access Print and Scan. Click the + sign to add a new printer. Select the printer from the list. Click the dropdown next to Use and select the 7515's driver. Let me know what happens.
I am a printer tech for HP.

I installed 10.5.8 to my IMac 5 and now it won't recognize a driver for my printer which is an HP PSC 1610. I downloaded the software from HP again and it still says it is searching for drivers

I installed 10.5.8 to my IMac 5 and now it won't recognize any drivers for the printer which is an HP PSC 1610. I downloaded the software and driver from HP and it still says it is searching for drivers to install the printer.

May be worth looking here:
Printer & scanner drivers for OS 10.5 and 10.6:
http://support.apple.com/kb/HT3669?viewlocale=en_US

HPLJ3055 won't print through HPxb3000, but will print if directly connected to dv9000.

HPLJ3055 won't print through HPxb3000, but will print if directly connected to dv9000.

Hey there @pepsitruck
I understand you cannot print from your desktop however, you can print from your laptop.
Could you please run the Print and Scan Doctor again and let me know the results or post a screen image of the results?
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
You can also try manually stopping and restarting the print spooler and try printing from Notepad afterwards.
1. Click Start
2. Type "Services" in the search field.
3. Open SERVICES
4. At the bottom, click "Extended View"
5. Search for Print Spooler
6. Right-click it and choose Properties
7. Select as Automatic in the drop down box, close the Window
8. Right click on Print Spooler and choose "Stop", wait until it stops and then right click again and "Start".
9. Close out of Services and try your print again.
When you get to your response, please include which version of Windows you're running please.
Which Windows Operating System am I running?
Thank you,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Just upgraded to snow leopard, downloader apple support drivers for canon mp620. Why won't a printer list display in add printer window?

Just upgraded to snow leopard, downloader apple support drivers for canon mp620. Why won't a printer list display in add printer window?

Assuming the MP620 is connected to your wireless network, then there are two components to this device - the printer and the scanner. The printer uses Canon proprietary software while the scanner is supported by Apple's Bonjour service. So in many cases, you will at least see the scanner, shown as Bonjour Scanner in the Kind column, while the printer can take longer to appear and is shown as canonijnetwork in the Kind column. If you cannot see either then you have a network issue. Try turning off the MP620 for a minute and then turning back on. Then see if the scanner / printer component appears in the Add Printer window. If you still don't see either, then confirm the MP and the Mac are using the same network. If you know the MP's IP address you can use Network Utility to Ping the address. You can also enable Bonjour Bookmarks in Safari preferences and when selected, the MP620 should appear.

Airport won't see printer or/and send to printer

I thought about posting this in PRINTER forum but the printer works connected directly to the laptop, so I assume it's the airport settings.
I'm visiting my parents from across the country and I hope I didn't make a grave mistake by talking them into buying Leopard. Now they can't print into the other room.
We both have Macbook laptops, both with Leopard just installed. One was erased & installed and the other upgraded. Both won't print to to HP Deskjet 5600 series All-in-one printer via Airport base station. We we're able to do before.
In TIGER, I remember having a problem setting this up until turning on the "distributing address" in the airport utility. But with the new Airport Utility application, it's completely different. I don't understand anything about the DHCP, etc.
From my upgraded laptop, it's able to 'see' when adding new printer. When trying to print something, it sends it to Que:
"/System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr failed"
From the '_erased and installed_' laptop, it won't see it.
In my Airport utility--> PRINTER tab--> USB PRINTERS: (blank)
Under it has the name of the correct printer.
Does that mean it sees it?
Please help.

I was having serious problems with my HP Photosmart 7600 series printer using the built in drivers in OS X 10.5. Printing would be sporadic and would take several minutes to start and then might stop printing part-way through the print job. A lot of the time, it never started printing at all.
After checking the iFelix list of Airport Extreme compatible printers, I noticed that the recommended driver was 2.7. After a little google-fu, it looked like the correct driver was the hpijs 2.7.1 driver that I also use with my Linux installs. After downloading the driver and some supporting packages and re-adding my printer (specifying the hpijs driver), the first print job started printing immediately!
Curious why Apple would have a driver that isn't compatible with the APE used as the default driver when there is an open-source driver that they recommend as an APE compatible driver available...

CS 5.1 won't print 13x19 print on Epson R1800 printer. Other sizes will print. Suggestion?

CS 5.1 won't print 13x19 print on Epson R1800 printer. Other sizes will print. Epson offered suggestions and said it relats to Photoshop. Anyone else have this issue?

You'll get better answers on that in the proper PS forum...
Mylenium

Macbook won't print to my wireless Epson printer - I've reinstalled the software multiple times....

My iPhones and iPad still prints to my Epson wireless printer but since updating my IOS, my computer finds the printer but can't print. After two phone calls to Epson it appears it is a problem on the computer side. Anyone been able to fix this on their computer?

I tried to figure out how to get drivers from Apple but their documentation is not very clear -- especially for someone new to Mac after decades of PC use. Finally I scratched that and called Epson. An hour and a half on the phone with Epson and finally it works again. Had to remove all the Epson files and then force the computer to find the drivers Apple had. I wish that the Apple articles would have been as clear on how to do this!
Thanks for the responses.

Won't print 8 1/2 x 11 prints to my Canon Pro

Similar Messages

Maybe you are looking for