Won't print after the first time

The printer worked fine after I used the installation CD. Then it automatically updated the driver and now doesn't work. So I deleted the driver and re-installed it. I tried the original disc as well as the update on the website. Now when I plug the USB port into the computer, nothing prints. The program recognizes that the printer is there, but nothing happens. The control panel says "printing" but nothing prints. I tried installing the newest driver onto my laptop which is windows 8.1 Lenovo. It worked, but then as soon as I disconnected the USB port to pack up for the day and then reconnected it the next day, the printer no longer prints. I just changed all the cartridges so they are full. I am so fed up with this drivver issue. Help!
Karen

Take a look at this link from HP.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

Songs won't play after the first playing

I am having a problem whereby songs will not play after the first time they have been played. After I import them into I tunes, I play them once to verify that they have been copied correctly. However several CDs demonstrate the following behavior. After they have successfully played back one time, they no longer work in Itunes. I click them and nothing happens.
I just tried to re-rip the song from the CD that i used originally to put the song into Tunes and received the following error message: "An error occurred while updating the default player for audio file types. You do not have enough access priveleges for this operation". I am the only user of my computer and have administrator priveleges. I don't know how to remedy the problem that apparently exists. Can anyone help?

Can you confirm that Copy files to iTunes Music folder when adding to library is checked in the iTunes Edit menu > Preferences > Advanced tab > General sub-tab on your new computer?

HT1338 why won't my macbook let me transfer files to a SD card after the first time i plug it in?

My macbook stops letting me transfer files between it and storage devices (SD cards, hard drives etc) after i use it for the first time. it works originally but after i eject the device then i cant use it again.

Lightroom is not a file browser. If it thinks the photos are in folder A, you need to tell Lightroom that the photos are really in folder B. This is not a copy or a move. This is a "re-connect".
Here are instructions: Adobe Lightroom - Find moved or missing files and folders

ITunes doesn't open after the first time

Hi, my iTunes after the last upgrading doesn't open. Really it open the first time after starting pc then , when i shut down it seems frozen. Could you help me? Do you ave a solution?

Try following steps and test one at a time:
1. Restart computer, right mouse click iTunes icon and select "Run As Administrator"
2. If that does not work, check to see if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
3. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
http://support.apple.com/kb/TS2363
4. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR.

CS5 won't select brushes the first time I click on them

Hi,
I'm having some trouble with picking brushes to use in CS5. The first issue is that when I scroll through the different brushes available, if I hover over one for too long (in order to make the alt text with the brush's name show up), the brush selection will jump back to whatever I had selected previously, and I have to scroll through again to get back where I was. The second issue is that when I click a new brush I want to use, then move my cursor to the canvas, the brush resets itself to whatever I had selected previously, and I have to go back and reselect the new brush. (Sometimes more than once.) It's really messing up my work flow...
Does anybody have any idea how to make Photoshop actually select the brush I click on the first time I click it?
I tried reseting the brushes to the default, so that there weren't so many (I've downloaded quite a few) but this didn't help. I also tried restarting Photoshop. The problems are still happening.
For the record, I am using Photoshop CS5 on a Mac running OS 10.6.8. I'm using a Wacom tablet but also the computer's touchpad. The problem seems to happen whether I control the cursor with the touchpad or the tablet.
Thanks for your tme!

Unfortunately I'm still having the brush selection issue even after doing this. (Though it did fix some other things that had been frustrating me, so thank you!)

Read from text file takes very long after the first time

Dear LabVIEW experts,
I'm having a problem with read from text file. I'm trying to read only every nth line of a file for a preview with this sub vi:
I seems to work well the first time I do it. The loop takes almost no time to execute an iteration.
Then when I load the same file again with exactly the same settings one iteration takes around 50ms.
Subsequent attempts seem to always take the longer execution time.
Only when I restart the calling vi it will be quick for one file.
When executing the sub vi alone it is always quick, but I don't see how the main vi (too complex to post here) could obstruct the execution of the sub vi.
I don't have a the file opened elsewhere in the main vi, I don't use too much memory...
Right now I don't now where to look. Does anyone have an idea?
Regards
Florian
Solved!
Go to Solution.

I don't know the LabVIEW internals here, but I would think that it is quite possible that closing a file opened for read/write access writes a new copy of the file to disk, or at least checks the file in order to make sure a new file does not have to be written.
Therefore, if your main VI calls this subVI sequentially (you don't give any information about the place of this subVI in the main VI), you are actually looking at a close (check/write) -> open operation for any time you call it, as opposed to a simple open operation the first time. If you were to open the file for simple read access (since that's all you do), it should work fast every time because there is no need to check to see if it has changed.
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ

SubmitStatusForResource for s_apid_sched_work gets ignored after the first time

I am attempting to write a custom program to update Work on an assignment (not actual work).
I use the statusing service with the usual UpdateStatus and SubmitStatusForResource with a change xml like below:
<Changes>
<Proj ID="11444f27-83a9-e411-bfc2-00155d387f03">
<Assn ID="a480753f-e0b2-e411-819f-080027003803" ResID="741f3743-0a19-e411-b611-00155d603122">
<PeriodChange PID="251658246" Start="2015-08-01T00:00:00" End="2015-08-31T23:59:59">4140000</PeriodChange>
</Assn>
</Proj>
</Changes>
PID above refers to: s_apid_sched_work
This works fine for "actual work", which uses a different PID in XML above, but when I try to use it to update "work", it only successful the first time. Any subsequent calls to change the work for the same period or other periods gets
ignored by project server. No queue message, no error thrown by the code. It just goes nowhere. I can see that setting "work" on an assignment via this method is supported according to the following article.
https://msdn.microsoft.com/en-us/library/office/bb428845%28v=office.14%29.aspx
Can someone offer any suggestions? I have already set my task tracking mode to "Free Form" in PWA settings, so nothing should be preventing this type of update.
Is this a BUG? Please help.

Not tried it Carlos - but if you are updating using statusing I would suspect that would not normally expect a change to 'work' - but to either actual work or remaining work - the kind of fields that you would update through the UI. For making
a change to work you could probably do this through other PSI methods apart from statusing - but obviously depends if you want the change to go through approval or not. Let me know how it goes Carlos. Agree that the documentation appears to say
this should 'work' - but try remaining work instead.
Best regards,
Brian.
Blog |
Facebook | Twitter | Posting is provided "AS IS" with no warranties, and confers no rights.
Project Server TechCenter |
Project Developer Center |
Project Server Help | Project Product Page

How to get Edge to ignore a trigger after the first time it has played

Hello all,
I have a symbol that is activated by clicking on a button. The symbol has two triggers at different points on its timeline. Each trigger activates a separate symbol. I want both triggers to work the first time through, but on the second and all subsequent times, I want the first trigger to be ignored. There is probably a little bit of code that will do this very easily (maybe an if else statement?), but I'm afraid I am not very good at that. Any ideas on how to accomplish this? Any help would be greatly appreciated!
Cheers, and all the best!

So here is a solution using a global variable: test1 revised.zip - Box
compositionReady:
sym.setVariable("firstRound", true);
yellow trigger:
if (sym.getComposition().getStage().getVariable("firstRound")) { // if firstRound is true i play, else nothing
sym.getComposition().getStage().getSymbol("yellow2").play();
sym.getComposition().getStage().setVariable("firstRound", false);

Samsung 4500 Printer won't print after restoring from Time Machine

My HD drive went down, and was replaced with a new one (1TB). Restored via Time Machine. But the printer (Samsung) won't print now. I get an error that a software update is required. I tried the System Preferences route; then I went to Samsung and downloaded a driver (once), that didn't work. I found another note that someone was having a similar problem, and tried this download
http://www.samsung.com/us/support/owners/product/SCX-4500W
Installed OK, but still no printer.
It worked fine until the software changes (I was using Mountain Lion before and after the HD failure).
But now, I have no printer.
Any suggestions besides buying a new printer?

Apple support drivers:
Samsung Print Drivers
You might try resetting the printing system:
Reset Printing System

Advice For Someone Using A Professional Printer For The First Time

Hello everyone
1. I'm doing some posters and flyers for my club using Pages. We've got them looking how we want on my home inkjet printer but now we need someone to print out large quantities. I've never used a professional print service before. There are simply loads of posts on this topic but I wonder if there is anyone out there that does this a lot and can tell me how they do it. I was hoping to initiate the definitive Professional Printing FAQ thread.
2. Reading the numerous posts, there are lots of terms that I don't understand like 'bleeds' and 'pantone'. Understandably, print is a whole new world of technical terms. Can anyone recommend a good introduction to all this on the web?
Thanks

I don't know of a good basic FAQ for printing, but I can try to address some of your issues.
What is a "large quantity", IanB? Tens, hundreds, thousands? In my experience this is probably the most critical issue, since it pretty much determines the printing method used (and thus the cost). Anything under about a thousand copies will these days likely be printed "digitally", which essentially means run off on a colour laser printer. In my experience, as long as you are not fanatical about colour accuracy, this method is very forgiving of the way the source file is set up, and most houses will take standard PDFs. It is much more expensive on a per-unit basis than offset printing, but there is also little/no "set up" cost, which means that for short runs it is often far more affordable in terms of total cost.
Once you get to big runs, where you need offset printing (presses that use metal plates for different colour inks), things change a fair bit, as you have to deal with colour separations and possibly spot (Pantone) colours as well. The setup costs for this kind of printing can be very substantial (making metal plates is expensive), but once set up, the cost per unit is far less than digital printing. If this is your first time out, I'd suggest either avoiding going this route, or finding a very understanding print shop that is willing to hold your hand through the production process.
As for bleeds, that refers to when objects on your document go all the way to the edge of a page. The problem with using bleeds is that they require the printer to print the page on a larger physical piece of paper, with the bleeding objects slightly over the desired edge, and then trim that paper down to size, cut so that the bleeding section is cut through (to avoid a white unprinted edge). But because the cutting is not always absolutely accurate, you need to leave space between the edge of the page and any material that absolutely has to be on it (e.g., text), so that the trimming will only cut away some of the bleed, but not the critical material.
Bleeds make setting up (and printing) your document much more complicated, and you will be much better off if you can avoid bleeds for your first experience doing professional printing. If not, I'd again suggest that you shop around for a print house that says they'll be willing to walk you through the process of how to format your document to do this.
I'm sure others here that are more experienced in the printing process can point you to more comprehensive resources, or give you more detailed advice.

Ipod won't sync for the first time ever. I am also seeing the cloud for the first time. Help.

Windows 7 operating system. Ipod classic.
Added new content tonight (audio book discs - have done dozens of times before). Went to sync. Nothing doing. Tried two different cables. Noticed that what I added was put in the cloud. I had never seen the cloud before. I cannot get back to the regular library.
Usually when I sync, content on my device that is no longer in the library (in this case the cloud, I gues) is also deleted from the device. That isn't happening. I don't think things are syncing at all.
It would seem to me that it would not be the cloud that would sync, but the regular library, which I cannot seem to access.
Help

I have tried the suggestion to reset the sync log to no avail. Anyone have another idea? This just started after I downloaded 4.3.5.

Why does the "more info" of "Get info" get erased after the first time I look at it, and how can I get it back?

When I download a graphic, photo, or PDF, I can get information about it, including size and the web address of the download, using Get info. But in Mountain Lion, after I look at a file once, this information disappears. This wasn't true of Snow Leopard, though I can't remember whether it was true of Lion. In any case, it seems like a bug. Is there a way to recover this information?

Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox

Servlet failed with ServletException occurs the first time I try to access a jsp

Can any one tell why this exception occurs the first time I try to
 access a jsp. After the first time it doesn't occur. This happens only
 on solaris platform.
 Thanks,
 Shankar.
 Fri Jul 28 15:02:51 PDT 2000: <ListenThread> Adding address:
 192.168.0.36/192.168.0.36 to licensed client list
 Fri Jul 28 15:02:51 PDT 2000: <ServletContext-General> file: init
 Fri Jul 28 15:02:55 PDT 2000: <ServletContext-General> *.jsp: init
 Fri Jul 28 15:02:55 PDT 2000: <ServletContext-General> *.jsp: param
 verbose initialized to: true
 Fri Jul 28 15:02:55 PDT 2000: <ServletContext-General> *.jsp: param
 packagePrefix initialized to: jsp_servlet
 Fri Jul 28 15:02:55 PDT 2000: <ServletContext-General> *.jsp: param
 compileCommand initialized to: /usr/bin/javac
 Fri Jul 28 15:02:55 PDT 2000: <ServletContext-General> *.jsp: param
 srcCompiler initialized to weblogic.jspc
 Fri Jul 28 15:02:55 PDT 2000: <ServletContext-General> *.jsp: param
 superclass initialized to null
 Fri Jul 28 15:02:55 PDT 2000: <ServletContext-General> *.jsp: param
 workingDir initialized to: /space/shankar/weblogic/myserver/classfiles
 Fri Jul 28 15:02:55 PDT 2000: <ServletContext-General> *.jsp: param
 pageCheckSeconds initialized to: 1
 Fri Jul 28 15:02:55 PDT 2000: <ServletContext-General> *.jsp:
 initialization complete
 Fri Jul 28 15:02:55 PDT 2000:<E> <ServletContext-General> Servlet failed
 with ServletException
 [AddToMap: pattern=/login.jsp class=jsp_servlet.login]
 at java.lang.Throwable.fillInStackTrace(Native Method)
 at java.lang.Throwable.fillInStackTrace(Compiled Code)
 at java.lang.Throwable.<init>(Compiled Code)
 at java.lang.Exception.<init>(Compiled Code)
 at
 javax.servlet.ServletException.<init>(ServletException.java:88)
 at
 weblogic.servlet.jsp.AddToMapException.<init>(AddToMapException.java:14)
 at weblogic.servlet.JSPServlet.service(JSPServlet.java:118)
 at javax.servlet.http.HttpServlet.service(Compiled Code)
 at
 weblogic.servlet.internal.ServletStubImpl.invokeServlet(Compiled Code)
 at
 weblogic.servlet.internal.ServletContextImpl.invokeServlet(Compiled
 Code)
 at
 weblogic.servlet.internal.ServletContextImpl.invokeServlet(Compiled
 Code)
 at
 weblogic.servlet.internal.ServletContextManager.invokeServlet(Compiled
 Code)
 at weblogic.socket.MuxableSocketHTTP.invokeServlet(Compiled
 Code)
 at weblogic.socket.MuxableSocketHTTP.execute(Compiled Code)
 at weblogic.kernel.ExecuteThread.run(Compiled Code)
 Fri Jul 28 15:02:55 PDT 2000: <ServletContext-General> servletimages:
 init


Try a different brand of discs. Try restarting your computer.

Daily problem starting workflow for the first time

Hello,
for one of our clients we have configured an OOTB workflow which handles the routing of incoming post on a daily basis using Kofax as scanning client to to release the incoming document to SP using a workflow for routering to the proper department. The problem
we experience is that after every restart of the services, the first workflow is not triggered. After the first time, all workflows started after that are running fine.
We already tried plaing around with the SP workflow timer job, but so far with no results. Does anybody had a similar experience? If yes, what's the cause of this problem and even better, what can we do to fix this? Customer is running on a SP2010 platform.
Thanks
Ludwig Stokkelaar
OpenDocs bv
email: [email protected]

Hello all,
for one of our clients we have configured an OOTB workflow which handles the routing of incoming post t the proper apartment on a daily basis using Kofax as scanning client. The problem we experience is that after every restart of the services, the first
workflow is not triggered. After the first time, all workflows started after that, are running fine.
We already tried plaing around with the SP workflow timer job, but so far with no results. Does anybody had a similar experience? If yes, what's the cause of this problem and even better, what can we do to fix this? Customer is running on a SP2010 platform.
Thx
Ludwig Stokkelaar
OpenDocs bv

My ipad won't turn on. Have tried to reset by pressing the two button at the same time. It work. Why is this happening? For the first time it happened to me after using the ipad 4 running on ios 7, for almost a year and a halftime

My ipad won't turn on. Tried to reset and it work. I'm using ipad 4 with ios 7 and this is the first time that this happened to me.what is wrong with the ipad?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Won't print after the first time

Similar Messages

Maybe you are looking for