Won't print. All other functions work properly

hp officejet 6500A Plus/Windows 7.  Won't print documents. No Error Message.  Window that displays documents being printed is empty.  All other functions: Scan; fax; copy work properly

Please download and run the utility in the following link.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91799-1&cc=us&dlc=en&lc=en&...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • I cannot open my email. All other functions work ok.

    I cannot open my email. All other functions work ok.

    Assuming that you mean that the Mail app isn't working properly as opposed to it not being able to download your emails due to account/password problems, then try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

    I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • My Ipad2 won't turn off.  I've tried the reset method,  holding both buttons down for at least 10 seconds, but this doesn't work. I'm on version 5.1.1 and all other functions work except that I cannot get onto the internet via wi-fi either.  Help ??

    My Ipad2 won't turn off.  I have tried the reset method by holding both buttons down for at least 10 seconds, but this doesn't work.  I can't get onto the internet via wi-fi either (don't have a 3G card fitted).  All other functions seem to be working OK including charging. Not had this problem before, but I recently upgraded software to 5.1.1 so is there a bug in there somewhere?

    Look at last link.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My iPad 2 is not messaging. It says no network connection yet all other functions work?

    My messaging function on my iPad 2 is not working. It asks for my Apple ID password and then says "check network connection". All other functions operate. Email and internet work fine? Has someone else experienced this issue?

    hello my name is jaydin.c333 will you try to reset all of the settings
    you can do this buy going to
    settings>generial>reset>reset all settings

  • EPrint not connected but all other functions working

    I have just set up the All-in-One HP216B printer. All wireless connections are perfect and I can print from multiple wirelessly connected laptops and one desktop connected via ethernet to the router. All basic functions of print, sca, copy work. I followed the set up for the Web Services and that seemed to work. The wireless network test shgows everything to be in perfect order. I have an IP address etc. However when I am in the ePrintCentre the printer is showing as not connected and when I attempt to send an email to the printer it shows up as pending in the Print Jobs. The printer is clearly just not connected to the internet and that is also verified by the fact that the PrintApps cannot download the prints from the hpcentre web site.
    I have switched the printer off and on again. I have removed the printer and added it again - all to no avail. I have looked through the forums and still have no success.
    Anybody any ideas ?
    This question was solved.
    View Solution.

    OK it works now. Not sure why or how but repeated attempts at switching printer on and off coupled with resetting email address has worked. I also changed back from specifying allowable emails addresses to allowing all and today my prints arrived. Curiously I also have to switch the printer on ana off to reactivate the scan connection to my desktop and laptops all connected via the router.
    I am semi happy as this is not a plug and play or seamless solution that is described on the box

  • IPhone 6 and 6 plus jumping on and off wifi.. All other devices working properly

    I recently purchased the iPhone 6 and iphone 6 plus and now having wifi issues. Sometimes they will stay connected for a couple of hours other times it will jump on and off 10 times on in a couple of minutes.Also note that I have a iPad mini,5c,4s,and all are staying connected properly. I called my internet provider and everything checked out ok. I also connected Apple and went through all the settings and checked out ok. They suggested a new router... not sure that would be it since all other devices are working fine. Any help would be appreciated!!!!

    I have the same problem. iPhone 6 Plus, iOS 8.1

  • Phone malfunctioned while all other functions work. This is a iPhone 4S.

    I have a iPhone 4s & has been working well for ~ 10 months. Today I can't make any calls, nor receive any calls. I can't access the contact list. it looks like the phone icon stuck on screen. I noticed the iOS7 is ready for update. is that the reason for this sudden phone malfunction? other functions are not affected. i can text, search, check weather, map, etc. emails look fine too.
    Can this be fixed? is software update the reason? I got home and started download and update via wifi. The download part was ok. after that it says "preparing update". this step is still going, take super long... could anyone offer some tips? many thx.

    You'll need to wait for it to update, unfortunately there's nothing you can really do besides an update or restore. Can also try a hard reset by continueously holding the power and home buttons until the device restarts.

  • Can no longer update one of my iWeb pages (all others are working properly)

    I have an iWebsite with several pages. One of these pages is no longer working correctly. The page that is causing problems contains a series of text boxes and hyperlinks (which allow people to download PDFs). I can no longer update the vast majority of this page, nor can I see where the different text boxes start or begin. (I am currently only able to change the title, not the body.)
    When I go online to look at the actual published site, I am able to download all of the desired PDFs, however I cannot highlight or copy any of the text written on the page (this is not the case for the other pages of the website).
    I have updated this page several times over the last few years and have never run into this problem. Does anyone have any suggestions as to what might be wrong and/or how I might remedy the situation?
    Thank you in advance!!! Your advice is much appreciated!

    +You mean you can't see the text or can't see the text box sides and drag points?+
    +Do a Select All and see what you see.+
    When I select all I am able to see the text box that houses the body of the page.
    +What happens if you were to click in the center of the page and hit the delete key (you can always do an Undo command)?+
    Nothing happens. I can only delete the entire page (using the select all approach).
    +What happens if you click on the center of the page and drag to one side or another?+
    Nothing happens when I do this. I can move this main text box by moving each side individually.
    +I can see the text in the page's html file and it is an image file: http://web.mac.com/naomieisenberger/san/NaomiEisenberger_SAN_Papers_files/shapeimage1.png. If you go to the page it's a very fine, 1 pixel, image at the very top of the page. You'll see the cursor change to a magnifying glass. At that time click and drag to the desktop. It won't look like you're dragging anything till you get to the desktop.+
    Yes, this is the problem. This space is acting as if (or rather has been) converted to a graphic. Each reference listed on that page has been entered separately over time. It seems like the last time this section was updated it was saved as an image/graphic. I am not even sure how this would have happened or how to undo this issue. Do you know or have any further suggestions?
    Is there a way to view the html code on iWeb. . . to just work in code?
    +So you have to somehow figure out how to get it back to plain text. Do you have iWeb's preferences set to display the text image indicator?+
    Yes, there is a small yellow symbol.
    +You may have to create a new page to replace this one.+
    Thank you so much for all of the great advice!

  • Black will not print all other colors work

    black will not print others colors will

    The troubleshooting steps in the document here may help resolve black not printing on your Photosmart 6510.  If the above fails the post here may help (it is for a different model but same principle applies.)
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Number 2 key on numeric keypad does not work. All other keys work properly.

    The number 2 on the numeric keypad does not work.  Is there some way to clean it?  If not how do I go about ordering another keyboard?

    inside the remote there is a micro switch for each direction each can break
    so yeah you could be the first who write about the right arrow key microswitch being broke in your atv

  • When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

    When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I'm using Windows 8.1 and the browser won't load any web page. I downloaded the latest one from the website. Any help would be great. All other browsers work.

    I'm using Windows 8.1 and the browser won't load any web page. I downloaded the latest one from the website. Any help would be great. All other browsers work.

    Hi curtismoxam,
    Please try these troubleshooting steps: [[Fix problems connecting to websites after updating Firefox]]

  • My ringer only works for the phone ringer. It is silent on all other functions. Anyone experience this before? All settings are correct.

    My ringer only works on the phone. All other functions are silent and the ringer increase button does not add volume.

    Had this happen today and 2X past as you discribed. A reboot (turn phone off and on) restored all sounds for me. The first time I can't associate w/ a cause but the second and third were just after listening to a podcast using the apple podcast app - the only app available for that. That's my story and for now I'm sticking to it.

  • My AppleTV will not play anything over Air Play.  Every other function works perfectly, and my Internet/router are working at top speed.  I can watch HD Netflix and YouTube but nothing via my iTunes library on my MacBook or iPad.  All software is updated.

    Every other function works perfectly, and my Internet/router are working at top speed.  I can watch HD Netflix and YouTube but nothing via my iTunes library on my MacBook or iPad.  All software is updated.  The AppleTV will recognize that Air Play is trying to do it's thing, but with music files it sounds like they're skipping and video files just load endlessly. 

    I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
    The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

Maybe you are looking for