Won't print from other computer

When I send an email from my laptop to print the printer recognises it as spam and won't print it ,HP deskjet 3070A,Vista,new set u

Hi Sparkle1,
There are a few things that could cause your email to be rejected by the spam filter.  Here's a list of things to check when you send an email to make sure this doesn't happen:
1.  The printer's address is the only recipient (this includes To:, Cc:, and Bcc: fields).
2.  The subject line and body of the email both contain text and aren't blank.
3.  There are fewer than 10 file attachments, and the total size doesn't exceed 5MB.
4.  If the email is being forwarded, make sure the "FW:" tag is removed from the subject line.
Let me know if these help!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

  • HP 2050 deskjet all in one -- will scan but won't print from this computer

    My deskjet 2050 will scan from both of my macbook computers, but will only print from one.  It gives an "on hold" message whenever I print from this computer.  Then I hit "resume" and it says "nothing is being held."  I have already downloaded and re-installed the driver, and it didn't make any difference.
    It prints fine from the other computer, but it's a pain to have that limitation.
    Thanks in advance for your time.

    Hello @CazzoInMano , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you're running into print issues.  I would like to help with that!
    What version of mac are you using?
    I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
    Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
    I would also suggest running your Apple updates:  OS X: Updating OS X and Mac App Store apps
    After the updates, I would recommend reinstalling the HP Deskjet 2050 All-in-One Printer.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Printer won't print from desktop computer

      My printer was printing fine until I went away on vacation. I shut off my computer and printer while I was away. When I came home, I started up the computer and printer and the printer would not print from my desktop. I can print wirelessly from my devices (IPhone and laptop) but not from the desktop computer. I have tried the HP Doctor program (did not help), have tried plugging the printer directly into the computer through a USB port (dopesn't help) and tried it without a printer cable. Everything was fine when I left--now it won't print at all.  I'm thinking it somehow dropped something it needs to print successfully? Any suggestions?

    Hello ! Thanks for posting on the HP forums!  I should be able to provide some help regarding the printer issue. You mentioned that the printer is able to print wirelessly from other devices such as your iPhone and other laptop.  This sounds like there may be either a software issue in the current computer or a firewall in the current computer blocking the printer.  If it was working before i doubt it is firewall but it can still be a factor.  The first thing I would recommend is t uninstall and reinstall the HP software.  To uninstall the software i would recommend following this document regarding Uninstalling the Printer Software.  In the document click on Windows 8 and follow the steps.  After the uninstall is finished it is recommended to restart the computer before you re-install. When running the install of the HP software it should locate the printer as WiFi connected and set it up correctly.  Let me know how it goes!

  • My printer (HP Photosmart D7360) won't print from my computer.

    When I try to print something like an Open Office  (.odt) or Word (.doc) document,  I  get no error message, it just doesn't print. The same thing happens when I try to print out recipes that I've downloaded, or e-mail. When I go to "printer settings" I get a message that says: "No default printer found. Please choose a printer and try again."  When I click on OK, I get a screen up that says:  "Printer Setup/ Name: (((hi-lited)))HP Photosmart D7300 Series/ Status: Default printer; Ready/ Type: HP Photosmart D7300 Series/Location: USB001/ Comment: (((none)))" Below this are 4 buttons, (Options) (((alone on the left))), (OK) and (Cancel) (((Center right))) and (Help) (((alone on the right))). If I click on the "OK" button, the screen disappears, and nothing else happens. Exactly the same thing happens with the "Cancel" button. The Control Panel/Devices & Printers screen shows the HP Photosmart D7300 series as the default printer.  Without questions, I don't know what else to say. This is a great pain in the butt.

    Hello @CBJack,
    Welcome to the HP Support Forums!
    I understand that you're experiencing issues when trying to print from certain programs on your Windows 7 computer to your HP Photosmart D7360 Printer. I would like to assist you today with resolving this printing issue. It does appear that there is a driver conflict occuring on your computer. That may mean that your driver is not correctly installed, or the correct driver is installed but certain programs aren't 'agreeing' with that driver. I will be running you through some troubleshooting steps below to isolate this issue and resolve this issue. Can I please have you follow the steps below.
    Step 1: Run HP Print and Scan Doctor Tool:
    To start troubleshooting I am going to have you download and run the HP Print and Scan Doctor Tool. This Tool will run on your computer and 'fix printing' issues for you. Should any driver, software, or connection conflicts be found than the HP Print and Scan Doctor Tool will attempt to resolve those conflicts for you. Please click here to download the Tool. Once the Tool has downloaded please run the 'Fix Printing' option under the Tool. Once the Tool has completed please test printing again. Should no issues be found under the HP Print and Scan Doctor, but the printing conflict still occurs, there is likely a driver issue occuring between your printer driver and the programs that you're experiencing an issue printing from. Please proceed with the steps below to resolve this.
    Step 2: Alter Driver:
    I am going to have you install an alternate print driver on your HP Photosmart. Once the alternate driver is installed I will have you test printing to verify if the issue is resolved.
    Click on your Start menu
    Select Devices and Printers
    In the Devices and Printers folder right click on your HP Photosmart D7360 Printer and left click on Printer Properties
    Left click on the Advanced tab
    Left click on New Driver
    When the New Driver window opens just hit 'next' until you see a list of Manufacturers on the left and a list of Printers on the right.
    Select HP as the Manufacturer on the left
    Select Deskjet 9800 as the printer on the right. If Deskjet 9800 doesn't appear than select 'Windows Update' on the bottom left and once the update completes you will be able to select Deskjet 9800.
    After selecting Deskjet 9800 hit next to complete the New Driver Wizard
    Under the Printer Properties window select 'Apply' but don't hit OK
    Select the General tab
    Rename your printer back to HP Photosmart D7360 Printer
    Hit OK
    Lastly, right click on your HP Photosmart D7360 Printer one more time and left click on Printing Preferences
    Left click on the Paper/Quality tab
    Left click on the 'Normal' dropdown for Print Quality on the bottom right and change this to Fast Normal
    Hit Apply and OK
    Now that the alternate driver is added in please try printing from the programs you were previously experiencing issues with.
    Please respond to this post with the result of your troubleshooting. Best of luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • New HP envy 5530 won't print from my computer

    I just installed my HP envy 5530 through a wireless connection. It will not print anything from my computer. It shows it is printing but then the printer doesn't do anything. I can print from my andriod phone though. I have tried using the HP print and scan doctor. It says everything is fine. When I try to print a test page it doens't do anything- it will print an internal test page though. I have tried uninstalling and reinstalling the software (I also removed all old HP software)- that didn't help. I also tried turning off my firewalls- also didn't help. Not sure what else to do.
    I have windows 8.1 and an acer computer. I have had wireless printers before (HP) and never had a problem.
    Thanks for your help.
    Tara

    Hi usmc_roque,
    Thank you for your reply.
    I would suggest the following:
    - Uninstall the software. Uninstalling the Printer Software.  
    - Remove USB cable.
    - Reboot PC.
    - Download and re-install the software. HP ENVY 5530 e-All-in-One Printer Drivers . click the next button next to the Operating System type. (Make sure to choose Windows XP), scroll down, and click on Driver - Product Installation Software (1), then click on the blue download button next to HP ENVY 5530 e-All-in-One Printer series Full Feature Software and Drivers to download the driver.
    Try this as the HP Printer Install Wizard for Windows, is only compatible with Windows 7, and up to Windows 8.1.  
    Hi dwneylonsr,
    Thank you for your response.
    I would suggest to power off the PC, then the printer. Unplug the power to your router for 30 seconds, plug the router back in. Then turn back on the printer, then the PC. After that try to Uninstall the Printer Software, and re-install again. HP Printer Install Wizard for Windows.
    Hope this information helps, and have a good day.
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • My Canon MX860 won't print from my computer

    My MX860 will print test pages just fine (all ink cartridges are full) but will not print a document from my computer.  I reinstalled the setup disc and trying to have it print from my network.. Can't find the USB cable that came with it. all had been working fine until recently. 

    Hi martiv,
    I recommend performing 2-3 consecutive deep cleanings to try and resolve the issue.  Use the following steps to deep clean the print head:
    (1) Press the Menu button.
    (2) Press the  or  button to select Settings, then press the OK button.
    The Settings screen is displayed.
    (3) Press the  or  button to select Maintenance, then press the OK button.
    The Maintenance screen is displayed.
    (4) Press the  or  button to select Deep cleaning and then press the OK button.
    The confirmation screen is displayed.
    (5) Press the  or  button to select Yes and then press the OK button.
    Print Head Deep Cleaning starts.  Do not perform any other operations until Print Head Deep Cleaning finishes. This takes about 1 minute 30 seconds.
    If this does not resolve the issue, there is likely an issue with the printer that requires service.  In that case, I would recommend using the Contact Us link to get in touch with our support staff who can offer your available service options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • My printer won't print from my computer but will from my i-pad or cell phone. Ugh.....

    I have a Gateway Laptop. My new HP printer will print from my cell phone and I-Pad all day long.But the stinking thing will hardly ever print from my laptop! So frustrating.And when I do find some pages to get help I can't print the darn thingsoff to check as I go...... Help

    I have a Gateway Laptop. My new HP printer will print from my cell phone and I-Pad all day long.But the stinking thing will hardly ever print from my laptop! So frustrating.And when I do find some pages to get help I can't print the darn thingsoff to check as I go...... Help

  • Printer won't print from one computer in network

    We have a family network and for some reason on of the computers no longer can print.  The printer is a photosmart c7280 all-in-one.  I uninstalled the printer and driver and then downloaded a new driver and installed it to the computer.  The computer's network recognized the printer but nothing that is sent to the printer prints and i just get an error message but no reason why.  The printer is physically connected to a x-p computer and the computer in question is running Vista.  However, that shouldn't be a problem because this computer used to be able to print.  I just don't know what to check to make sure nothing has been turned on or turned off on the computer so that the printer doesn't recognize this printer any longer.
    Before i downloaded the new driver, i deleted the old one and now I have just discovered that after i reinstalled the driver, there is not printer listed in the windows device manager.  The printer does show up in my network area tho and in the printer folder.  i have no idea what's going on.
    Message Edited by sylvia_dianne on 07-24-2009 09:31 AM
    Message Edited by sylvia_dianne on 07-24-2009 11:39 AM

    Is the XP computer connected to the C7280 via USB?
    How is the C7280 connected to the home network?
    How is the Vista computer connected to the home network?  Can you open the printer's internal web page by browsing to its IP address?
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

  • My MG3500 stopped working. It still copies, but won't print from my computer any more.

    I have an MG3500 printer stopped working wirelessly. I set up the printer and it worked fine. Then, suddenly, it stopped working. I send something to print and it says there is a printer error. I tried to set up the connection again several times and each time it tell me that the printer cannot be detected on the network. Nothing has changed except that it no longer will print wirelessly.

    Hi steamboatvail, You can try reinstalling the latest printer drivers available from the Canon USA website to see if this will restore the connection between your printer and the network.  Before reinstalling the drivers, please ensure that the wireless setting of the printer is enabled by following these steps: 1.  Press and hold the Stop button until the Alarm lamp flashes 18 times. 2.  Release the Stop button. 3.  Press the Color Start button. After following the above steps, please click here to go to the Drivers and Software page for the PIXMA MG3520.  Once on the initial download page for the printer, please do the following:
    1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
    2. Next, please click on the red arrow next to the "RECOMMENDED DOWNLOADS" section and click the FULL DRIVER AND SOFTWARE PACKAGE file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
    Once you have downloaded the file, please double-click on it and follow the prompts to reinstall the printer drivers.  Should you still experience difficulty after reinstalling the drivers, please call or email us using one of the methods on the Contact Us page for further assistance.

  • Won't print from computer

    my printer won't print from computer but will from an sd card

    Hi,
    Download and run HP Print and Scan Dr utility from link below to troubleshoot the issue.
    www.hp.com/go/tools
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • When i 'upgraded' to Mavericks, it locked me out and shut down my computer.  now it won't print from my Epson Stylus CX3810.  Epson doesn't have the driver to download and neither does the App store.  Suggestions?

    when i 'upgraded' to Mavericks, it locked me out and shut down my computer.  now it won't print from my Epson Stylus CX3810.  Epson doesn't have the driver to download and neither does the App store.  Suggestions?

    I'm having similar problems with my Epson Stylus DX5000.  There was no in-built driver available (the generic old and new Stylus drivers didn't work), so downloaded the latest driver from Epson site.  It shows as being available to print to, but just sends data to the print queue then job disappears.
    I hope you're right C F McBlob, I could do with printing today but if there are new drivers available from November 5, then so be it.

  • Just purchased HP 8610 printer, but it won't print from my 8.1 windows computer

    just purchased HP 8610 printer, installed it wirelessly to my network but it won't print from my 8.1 windows computer.  I can print from my cell phone and I can print using the eprint function, but even though I can see it on the network I can't get it to print a document.

    Hi,
    Have you ilstalled it software and drivers on your computer yet ? Please download and run the following tool:
        http://ftp.hp.com/pub/softlib/software12/COL50849/​mp-136589-1/HPPSdr.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp printer 6210 all in one won't print from computer

    My HP6210 all in one printer will not print from a computer that has Vista. My operating system is Windows. The printer worked fine with my old laptop which did not have Vista. However, soon as I connected my daughther's computer, which has Vista, it will not print. My computer no longer works so I need to use hers. What can I do to get it to work? Thank you,Beeky27

    Hi , Welcome to the HP Forums! I noticed that your HP Officejet 6210 will not print from your Windows Vista computer. I am happy to look into this for you! First, I would make sure that the full feature software and drivers are installed, by downloading it from this link: HP Full Feature Software and Drivers. Then I would run the HP Print and Scan Doctor, to make sure everything is working. We will start with these steps and go from there! Hope this helps!  “Please click the Thumbs up icon below to thank me for responding.”

  • My epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

    my epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

    Open the Sharing pane in System Preferences. If the Computer Name is not set, enter a name. You may first have to click the lock icon in the lower left corner and authenticate to unlock the settings.
    Credit for this solution to ASC user Yuengdog1983.

  • Won't print from rear tray

    I have a Pixma MG6220. No matter what I do it won't print from the rear tray from a source on the web. I go to both the quick setting and main tab and select "rear tray." Still prints from cassette. I took out the paper from the cassette. Won't print unti I load paper in the cassette. I even selected a different paper than plain paper and selected rear tray - but it still printed from the cassette.
    I selected "continuous autofeed" for a default, removed paper from the cassette - and it still wouldn't print from paper loaded in the rear tray.
    It will print from the rear tray if it's a document originating from my computer (or at least I just tried that and it worked). I did not change from plain paper, I only had to select rear tray.
    Yes, I realize "save the document to your computer" will be a suggestion, but the website won't let me. It's a "free printable" that is not downloadable.

    Hello.
    The issue may also be related to a setting in your web browser.  Check to see if your browser has a Page Setup option.  This menu may be controlling the paper feed setting.
    If the issue persists, please try using a different web browser to test the unit.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for