Won't print from rear tray

I have a Pixma MG6220. No matter what I do it won't print from the rear tray from a source on the web. I go to both the quick setting and main tab and select "rear tray." Still prints from cassette. I took out the paper from the cassette. Won't print unti I load paper in the cassette. I even selected a different paper than plain paper and selected rear tray - but it still printed from the cassette.
I selected "continuous autofeed" for a default, removed paper from the cassette - and it still wouldn't print from paper loaded in the rear tray.
It will print from the rear tray if it's a document originating from my computer (or at least I just tried that and it worked). I did not change from plain paper, I only had to select rear tray.
Yes, I realize "save the document to your computer" will be a suggestion, but the website won't let me. It's a "free printable" that is not downloadable.

Hello.
The issue may also be related to a setting in your web browser.  Check to see if your browser has a Page Setup option.  This menu may be controlling the paper feed setting.
If the issue persists, please try using a different web browser to test the unit.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • HP 8630 won't print from Paper Tray 2

    I decided to upgrade last week with the dual paper tray printer and continue to have to manually load my stationary in paper tray 1 to print on custom paper. 
    Why in the world can't HP fix this issue....I've been with Apple Care to do everything regarding repairs on their end of the line and reinstalled printer software following that process and it worked....ONCE. Now I cannot even get the Options Box to stay checked long enough to get ONE print from paper tray 2.
    I'm returning this POS today....unfortunately, I tossed the box after I mistakenly thought it was fix after the Apple Care exercise.
    HP....what is your problem that you can't resolve this issue?????

    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
    If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HP Envy 7645 won't print from photo tray

    FIXED my own problem!Never thought to try setting the paper size to 4x6 in/10x25 cm! That's apparently what I get for being metric-phobic (or ignorant). But really, why provide a 4x6 option in the first place?  I can't get my Envy 7645 printer to print from the photo tray.  I'm specifically trying to print from the Photos app. I select the print option, set the printer, paper size (4x6), and paper options to "print from photo tray." I select print, and the HP print dialog appears and from there I am unable to set the photo tray as the paper source. The dialog comes up with "Default Settings" as the Presets option and when I scroll down through the dialog to select the Paper Type/Quality option, it shows paper type as HP Photo Papers, Quality is set to Normal, and the Source is set to Automatic (which fails to print from the photo tray; it defaults to the main tray). When I try to shift from Automatic to Photo Tray, I get an error message that says "The paper size selected is not supported by the Photo Tray. To print with the Photo Tray, go to the Page Setup dialog, choose a paper size supported by this tray, and then return to the Print dialog." At this point, I have no idea where to find the Page Setup dialog (it's not immediately apparent in the avialable options and I can't seem to find it under any of the Photos print options). Further, I don't understand why I'm getting the error in the first place as the paper installed in the tray is, indeed, 4x6 (as set in the original Photos dialog). I've tried playing with any number of varities of options (e.g, changing from HP Photo Papers to the generic other photo papers option, not specifying size of photo paper) and any time I select the photo tray option, I get the error message. 

    Hey ,  Welcome to the HP Support Forum.  Did you still need assistance?  I see that you have some interface questions about printing photos from a Yosemite Mac using your HP ENVY 7645 e-All-in-One Printer.  I would like to help.  Have you installed your printer's full-feature driver on the Mac?  If not, click here to install. Also, for your information, your printer's specifications re: supported photo paper sizes is available here.       When I tried printing a photo from my Yosemite machine (albeit with a different printer) this is how I configured the print job:   If I had the option I would also recommend setting the paper type to correspond with whatever kind of photo paper you're using.  If this approach doesn't help try the following steps:  Uninstall your printer - click here for instructions.  Repair disk permissions on your Mac - click here for instructions.  Once you've finished running the above-noted utility, restart your computer. Lastly, click here to reinstall your printer.  Please let me know the result of your troubleshooting by responding to this post.  If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Thank you for posting in the HP Support Forum.  Have a great day!

  • MX890 only prints from rear tray/Mac

    My MX890 printer always wants to print from the rear tray.  I have set the option in the printer window to print from the cassette.  I even change the "automatic feed" in the print dialogue window that comes up on my computer to "cassette," and it still gives me the msg that there is no paper in the rear tray.  It used to work if I did this, but now has stopped working.  How the heck to I fix this?  I'm using a MacBook Pro running Yosemite.  I have updated all the recommended software/drivers from the Canon website.  Thanks
    Ellen

    Hi ellenann9424,
    The machine will automatically feed paper from the rear tray when media types other than plain paper (such as photo paper) are selected in the printer driver, or on the printer itself when printing.  If you have already verified that the cassette is selected as the paper source in the printer driver and on the printer itself, please ensure that the paper type selected in both locations is set to plain paper, as all other media types will attempt to feed from the rear tray, even if the cassette is selected as the paper source.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Force print from rear tray in pages?

    Hello,
    I'm trying to print on a small card from pages.  I've created a custom document size 2.5 by 3 inches.  but can't figure out how to force it to print from the rear tray. 
    when I go to File - Print - Presets - Show Presets - Quality & Media, it shows me the Paper Source, but says "Automatic" and I can't figure out how to CHANGE the paper source to rear tray.  Any help would be much appreciated!
    Aaron

    Hello.
    The issue may also be related to a setting in your web browser.  Check to see if your browser has a Page Setup option.  This menu may be controlling the paper feed setting.
    If the issue persists, please try using a different web browser to test the unit.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • New HP Photosmart 7520 won't print from photo tray

    EDIT:  It will feed from the phototray if I print the photo from the Windows Photo Viewer.  However, it still refuses to print straight from the jpg, even though I explicitly specify in all the settings that I want to print a 4x6 from the photo tray. Is this typical behavior? I assume it would print correctly from other photo editing and viewing software, but haven't checked that yet so cannot be certain. PREVIOUS POST: I just got this printer, and cannot make it print from the photo tray.  It printed from the phototray during the installation and setup, but that was the only time.  The rest of the time, when I try to print a picture, it only selects from the regular paper tray. Is there some magical procedure involved?  I have a Windows 7 operating system, and just installed everything from the HP site.  I uninstalled and reinstalled, but still it doesn't work. I load a sheet in the phototray, make sure the correct printer is set, select the paper size (in this case 4x6in, the sample photo paper that came with the printer), select HP Everyday Photo Paper, Glossy, click Print, and the printer ignores the phototray and prints from the regular paper tray. I have scoured the web and the answers provided do not solve the problem.  This is very frustrating.  If I cannot get this resolved in another day or two, I will be returning this printer and will try a different brand. 

    I have already looked at that link and tried all the things I can try at home, aside from replacing the print heads.  Nothing works.  The magenta seems to be the biggest offender.  When I print photos that have a lot of magenta in them, I also get the horizontal lines, so it is not just the regular paper used by the printer's quality report (my first suspicion, sadly proven wrong). I see now that this printer also cuts off the image when printing a borderless photo.  I have not found a solution for that yet, either.  It also went crazy in the middle of a print job (told me that I needed to power it off, lost its wireless connection, regained its connection, but would not talk to the computer).  I had to turn it off and on again to reset it, and after that it seemed to print, at least. This printer has been a very expensive mistake, considering the ink and paper I have gone through in the past week.  I have four days to decide if I want to return it and just eat the cost of the ink cartridges.  I am seriously considering it at this point, but will try to work things out for another day or two.

  • Aperture won't print from photo tray on HP Photosmart 6520

    I've just started having a problem printing 4x6 photos with Aperture.  When I print a borderless 4x6 glossy using the photo tray on my Photosmart it works fine. When I say to print a 4x6 borderless using the photo tray with photo premium paper it prints from the main tray rather than the photo tray.  Plus now it's giving me a picture with borders, even though I specified borderless.  Anyone have this problem?

    Sorry, I do not know anything about your Printer. Have you looked, if there is an update for your printer driver, before you start reinstalling Aperture? If yes, upgrade your printer driver first. Also check, if you are having the same problem when printing from a different user account. Maybe some settings in your user accunt or startup items are interfering. You could also check, if printing from iPhoto or Photoshop has the same problem (but don't waste expensive photo paper on these tests ).
    What is the Aperture version you are using?
      Let me ask this: is there a problem deleting Aperture and reinstalling it?  Will I lose anything?  Thanks.
    Your images are stored in the Aperture library/libraries, and your settings in your user library. This should not be affected by reinstalling Aperture. But do not reinstall, without ensuring that your backup is current.
    How to reinstall will depend on the Aperture version you are using. This support article describes the procedure - ignore the title of the document - it is written to help with a nasty bug.
    See: Aperture 3.4: May quit unexpectedly on launch after updating
    Regards
    Léonie

  • My MG5220 won't print an original 3 page document from rear tray.

    I have only recently had trouble printing original documents from rear tray.  I have completed maintenance ( cleaning), checked paper media, etc.  I have checked page set-up, etc.  I think I am overlooking something that is obvious but I can't see the forest for the trees.  Please advise.  Thanks!

    Hi Kashmie,
    To try and resolve the issue, with a flashlight or other bright light, please check the paper feed area of the printer and verify that there are no paper jams or obstructions in the printer that may be causing the paper not to feed.  Once this has been done, please look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely.  Next, please remove and reseat all of the ink tanks in the printer.  Once all of these steps have been performed, if you still experience difficulty, please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Won't print to photo tray, but will print test page

    I have most current Vista driver, but can't print to photo tray.  It won't pull the tray in, although it works great when printing test page.  I tried various page/paper settings and "photo tray" light settings, but still won't print from Vista.
    Tried 8250 printer properties, changing paper settings, but can't recognize settings, even though it sees the paper and prints the test page.  Seemed to work just fine with XP.
    This question was solved.
    View Solution.

    Plugged into an XP machine, photo printed.
    Plugged back into Vista, fooled with the settings, then it worked!
    I don't know what exactly fixed it...

  • HP Officejet Pro 8600 N911g won't print from applications from IMac OS 10.7.5

    Just had a software update today, now it won't print from applications (Excel, Word, etc).  I've done all the troubleshooting in the exact orders and have also shut everything down, reinstalled, turned off router, etc.  Don't know what else to do.  Prints out printer status report, Wireless network test results shows that no problems found, congratulation on the successful setup of your wireless printer.  IP addresses on wireless and printer are similar.  Looked all over forum, but couldn't find a solution.  Printer is not even 2 months old.  Doesn't make sense.  Seemed to stop  printing after we used the scanner, not sure if that is an issue for any reason.  Any help would be appreciated, thanks.

    Just had a software update today, now it won't print from applications (Excel, Word, etc).  I've done all the troubleshooting in the exact orders and have also shut everything down, reinstalled, turned off router, etc.  Don't know what else to do.  Prints out printer status report, Wireless network test results shows that no problems found, congratulation on the successful setup of your wireless printer.  IP addresses on wireless and printer are similar.  Looked all over forum, but couldn't find a solution.  Printer is not even 2 months old.  Doesn't make sense.  Seemed to stop  printing after we used the scanner, not sure if that is an issue for any reason.  Any help would be appreciated, thanks.

  • In adobe reader, I can't print from different trays?

    Using Adobe Reader, I can't print from different trays on my Lexmark x954 printer.  I've tried reinstalling the print driver (latest version) and reinstalling Adobe Reader with no luck.  I can see the trays and even select them in the print dialog box in adobe but when I print I am unable to print from the correct trays.  It always prints from tray 3 of my printer no matter what tray and type of paper I choose in adobe.  Any suggestions?
    I've also noticed a problem printing through Preview.  I can select different trays using preview but the print time is extremely slow.  It seems like it has to re-download the pdf page each time it goes to print.  So a 100 page print job takes 20-30 minutes to complete which means other have to wait for my job to complete so it really slows our office down.
    Thanks for your help.  Also, I am using the mountain lion operating system.  Thanks again! 

    Don't know whether it will make any difference, but a new version of Adobe Reader has just been released:
    http://www.macupdate.com/app/mac/73/adobe-reader  (version 11.0.03).

  • My epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

    my epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

    Open the Sharing pane in System Preferences. If the Computer Name is not set, enter a name. You may first have to click the lock icon in the lower left corner and authenticate to unlock the settings.
    Credit for this solution to ASC user Yuengdog1983.

  • Can't print from 2nd tray

    My printer has a 2nd tray for photo paper. How do I get iPhoto to print from that tray to print out photos at home?

    printer specific options (like paper source if it is supported on your printer) are on the final print window - if there are not there click on the little grey triangle to the right of the printer name to open the full window up
    LN

  • Won't print from computer

    my printer won't print from computer but will from an sd card

    Hi,
    Download and run HP Print and Scan Dr utility from link below to troubleshoot the issue.
    www.hp.com/go/tools
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • When i 'upgraded' to Mavericks, it locked me out and shut down my computer.  now it won't print from my Epson Stylus CX3810.  Epson doesn't have the driver to download and neither does the App store.  Suggestions?

    when i 'upgraded' to Mavericks, it locked me out and shut down my computer.  now it won't print from my Epson Stylus CX3810.  Epson doesn't have the driver to download and neither does the App store.  Suggestions?

    I'm having similar problems with my Epson Stylus DX5000.  There was no in-built driver available (the generic old and new Stylus drivers didn't work), so downloaded the latest driver from Epson site.  It shows as being available to print to, but just sends data to the print queue then job disappears.
    I hope you're right C F McBlob, I could do with printing today but if there are new drivers available from November 5, then so be it.

Maybe you are looking for