Won't Publish changes to "Welcome" Page

I recently made changes to my website. I created a new page, and I adjusted my welcome page. When I "published" the edits, the edits on my Welcome page didn't go through. The frustrating thing is that the new page posted, but you wouldn't really know it because its link is not on my welcome page's navigation bar (on the published sight. On my computer, it's link IS on my welcome page.
Any advice?
Thanks!

As varkgirl alludes to... Your web browser may be showing you old information from its memory cache instead of new information that you have just updated. If you are using Safari, look under the Safari menu and select "Empty cache..."
Safari does this because it thinks that it can get you your webpage faster from its memory cache than by fetching it from the internet. What Safari doesn't know is that you have updated your page and it has not gone out to look for the new information. That's why the old info (and sometimes a weird combination of old and new info) still shows in your browser.

Similar Messages

How to embed a BI publisher Report in welcome page of fusion app?

Hi,
I was a ADF developer, new to fusion app and BI publisher. We are using Oracle Fusion Application version 11.1.7.0.0 for compensation implementation and BI publisher is a part of it.
I've developed a BI publisher report, placed it under Shared Folder \ Custom, want to embed the same in welcome page of the fusion app. By following the video How do I embed a report in a sales dashboard? - YouTube, I followed below steps
1. Administration -> Customize Work area page
2. Add Content
3. Clicked on 'Reports and Analytics'
4. Clicked on 'BIPresentationServer'
5. Shared Folder
6. Custom
Issue: Though I have some reports under this 'Custom' folder, it says 'Empty folder'. It only shows the 'Analysis' but not any reports. Problem is not with this folder alone but all. I've also ensured that I am able to see all the reports when I navigate using Navigator -> Tools - > Reports and Analysis.
Can any of you guide me on what is the issue and what to be done?
Thanks in Advance.

Thanks for the link. I am reading it for better understanding.
I just came to know from SR that, In order to see the BI Publisher in the Presentation Server list of values, we have to embed the BI Publihser report inside an OTBI Dashboard.
So we need to create a 'Dashboards' folder (It is must only then we are able to see it via fusion apps. to select and embed), then Dashboard and add the desired report to this dashboard. Now we can navigate to this dashboard, open it and select the page to embed it.
Might be useful for the ppl who faces similar issue. Thanks.
Raghu

IWeb won't publish changes to website without adding "/SiteName"

I'm trying to publish changes to my website with a URL that is an established domain name.
When I click "Publish Site", iWeb adds "/SiteName" to the URL and the changes are
published to "URL/SiteName". But when I search for my site on Google (it pops up
readily as the website has been accessed many many times), the OLD, UNCHANGED
website with the old URL comes up. To get the revised website, users would have
to specifically use the CHANGED URL, "URL/SiteName."
Every time I try to remove "Site Name" from the blank for Site name, iWeb puts
"SiteName" back in. How do I keep the Site name slot blank so that iWeb will
publish my changes to the old familiar URL that can be found on Google?
As a Server engineer commented to me, "There has been a folder called [SiteName] uploaded
recently to the root [URL] of your account. This make me suspect that iWeb is set to publish in the
wrong directory. Make sure it is publishing to the public_html directory."
I put "public_html" into Directory/Path. Still no changes to my website at URL; changes have
been published only to "URL/SiteName".
Any help available?

That is the way that iWeb works and it is normal practice to get the url with the Sitename in it. As you have found, if you try to leave the sitename blank, iWeb will put it back in.
The server engineer that you spoke to is correct that your site folder has been uploaded to your 'public_html" folder on your server.
If you want your url without the sitename included, then you need to upload the contents only from your site folder and NOT the whole folder itself and then your url will be http://www.domain.com without the http://www.domain.com/sitename/page name.html.
You can achieve this by publishing your site to a local folder from iWeb and then you need to download an ftp programme such as Cyberduck or Yummy ftp. You then use either of these 2 to upload only the contents of your site folder to your 'public_html' folder on your server and if you just upload the contents and NOT the whole folder itself, then your url will be http://www.domain.com.
Sometimes putting 'public_html' into the Directory/Path will not work and you'll need to strart from scratch, so you'll need an ftp programme so that you can link up to your server and you can see exactly what is in your public_html folder on your server and delete the site folder and start again, by then uploading just the contents of your site folder rather than the whole folder itself.
Ultimately, what you need to do is upload the contents and the contents only of your site folder and NOT the whole folder itself to get your url back to http://www.domain.com without the sitename.

Automated Picture Changing on Welcome Page

I would like to change the main picture I have on my Welcome page either randomly, every day of the week, day of the month... something like that so that the main image appears to be different from time to time. If you see the "White" or the "Black" themes - that is the picture I would like to change from time to time.
Any thoughts on how to automate that?

I've also been trying to figure out if this is possible. I would like to have some music play while different pictures are changing -- almost like a slideshow -- but on my home page.

Why won't Reader X display Welcome page created in AA 9 Pro?

I created a Portfolio file in Adobe Acrobat 9 Pro that includes a Welcome and want to view it in Adobe Reader X. Adobe Reader X opens the file but does not launch the Welcome page first- only the file icons page is displayed. The Welcome page is displayed properly only if the file is opened in AA 9. Did I miss a setting somewhere in AA9 that activates the Welcome in AR X and if so, where?

I am suddenly having the exact same error and PT 8 LE crash!!
Regardless of what Avid website says or anyone who quotes their official statement, I have been using PT 8.0.1 on 10.6.8 since 2010 with a Mbox 1, on a Macbook Pro, a Mac Mini and an iMac. It has ran perfectly all this time, never had any issues or crashes. I have a bunch of plug-ins and have never had one single issue with anything. Now suddenly, I had to replace a hard-drive in my iMac (2011 3.4 i7) and re-installed PT 8 and then update to 8.0.1 and I get this crash error when opening PT: EXC_BREAKPOINT (SIGTRAP). I also cant even complete the 8.0.1 update installer because it fails at the last step: "run postflight script for Interlok Extensions".
This is so frustrating because I have installed this software more than a few times in the past 4 years and never had an issue. This is totally out of left-field.
I cant find anything on the web, except I am seeing a few posts like this pop up recently. If anyone can come up with a solution, please let us know!
Again, it is totally untrue that PT 8.0 does not run on 10.6.8 because I have recorded over a 1000 sessions on it.

IWeb won't publish changed pages, just entire site

Hi folks, I have iWeb 09 and use ME as my webhost. I'm having an issues when I create additional pages iweb now publishes the entire site and not just changes. In the past published pages were blue and changed pages were red, now all pages stay red even after a successful site update.
of course this is rather annoying and time consuming as i have several gigs on my site, when only changing 1 page it takes hours to publish.
Any ideas?
Thanks
Jon

David:
I just discovered one reason the iWeb keeps displaying icons red when publishing to a folder.
How are you publishing the site? To a folder and then uploading via an FTP client? If that's the case then are you deleting that folder after you upload? Again if that's the case then that's the problem. When publishing to a folder iWeb looks for for a plist file something like this: assets.file/--localhost-Users-toad-WSM%20Input-Helper%20Site-.plist. If that file is missing from the folder iWeb thinks this is a first time publication and publishes all the pages. You need to create a permanent folder to publish the site to and not delete between edits and republications. This is what it should look like:
Click to view full size
Bottom line: don't delete the site and files after publishing to a folder.
OT

IWeb won't publish changes

I made changes to my first page and I've tried everything (I think) to get the new page up on .Mac. Emptied cache, viewed in Safari, IE & Firefox, deleted my entire site from .mac. I've tried changing the linked buttons and publishing to .mac. I've tried publishing all to .mac.
I do have the site published on a separate server but need this link operating properly. Could there somehow be a conflict with the pages on another server? At any rate I've deleted every old file I can find on my mac, on .mac, on my other server...
Of course this happened about 20 minutes after announcing the site to prospective clients.
Thanks for any clues.

I just tried publishing all and got a error message on one of the files. The time before that it said the .mac server was busy.
Here's the site:
http://web.mac.com/patrickfifth/iWeb/EstanciasInArgentinaiweb/EstanciasInArgenti na.html
It seems the biggest issue is the first page, once it finally seemed to replace the old page with the new it converted the text all weird.
Thanks for your help.

IPod won't go past the "Welcome" page on iTunes?

I broke my old iPod screen and got a new one yesterday. I restored everything from my old device through iTunes on my MacBook Pro, but whenever I try to put music from iTunes to my iPod, I find the "Welcome to your new iPod" screen. I got all my important Apps and purchased music back on and would really like to drag the music from iTunes to my device. Any help? Or should I just set it up as a new iPod?

Delete the existing firmware file from the computer. It is located here:
http://osxdaily.com/2010/12/08/ipsw-file-location-mac-and-windows/
Then place the iPod in DFU mode and then restore via iTunes
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Icloud won't run: always the welcome page!

I have set up iCloud on my iPad, following directions at apple.com/icloud/setup/
but whenever i use safari and try to go to i.cloud.com/calendar
i get redirected to i.cloud.com/ipad_welcome/
for ever and ever!
I give yp!
Please help!

Unfortunately, there are many reasons why the PSE Editor might crash, and often it is hard to diagnose quickly the reason for the crash. Here are some steps you can take to try to fix the problem:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Troubleshooting_Editor_cra shes

Set Document library view as welcome page

Hi
I want to set my Document library view as welcome page of my SharePoint site 2013.
How can I achieve this.
Regards,
Siva.

Hi,
According to your description, my understanding is that you want to change the welcome page to the document library view page in SharePoint 2013 site.
You can use SharePoint designer to find the view page in “All files” and then set the document library view page as welcome page .
Here is a detailed article for your reference:
http://techtrainingnotes.blogspot.com/2011/06/sharepoint-how-to-change-default-home.html
Thanks
Best Regards
Jerry Guo
TechNet Community Support

Won't publish my changes....

I use iWeb 09, published my site using MobileMe. It worked perfect. BUT now when I have made changes it won't publish my changes and the icons stays red. I tried Publish site, Publish site changes, Publish entire site. I successfully published my website to a folder on my HD. I updated Iweb, signed out of MobileMe, signed in tried again, over and over and over.... nothing works
Need help!
Thanks

Update: It's working now, for the time being. It's my experience that it's been working on and off for this past weekend up to now. I don't know if anyone else was experiencing problems in that time frame.
I spent that last weekend doing some significant changes to the site, adding a new logo, background and that coverflow animation you see on all the root pages. The site is comprised of 11 pages and 5 blogs, with many entires in each of those 5 blogs. I affected changes to each page, including all the blog entries, and then tried to publish yesterday morning. I think that's when the trouble really started, because I was publishing a high volume of pages at once – MobileMe doesn't seem to like that. This is when I started trying to move the pages to a new site within iWeb, which eventually crashed the program and caused all my early entries in all 5 blogs to get corrupted (that's what I'm calling it at least, because if I clicked on those entries I just got a blank white screen, and if I tried to publish before deleting them I got the "An Unknown Error Occurred" message each time).
What I'm interested in is your suggestion to use Cyber Duck. I've ran into this suggestion before on these forums and so, yesterday, I downloaded Cyber Duck, but am totally clueless on how to use it. I know nothing about FTP but would like to know if A.) will the site load faster going through an FTP service like Cyber Duck or (the other one I hear about a lot) Web Maestro; and B.) If it will make the site load faster, how complicated is the change over and could someone walk a FTP illiterate person like me through the process. I update the site daily and so I can't complicate the process of publishing too much. I hear Web Maestro has selective publishing, maybe that's the way to go?
Also, I've disabled comments on my site anyway, so no fear of that.
Sorry this ran a little long.
-Sam

Publishing changed pages only

How do I get iWeb to only publish changed pages? It is taking an incredibly long time for my uploads because it is re-publishing my entire site each time I make a change. Also, is there a feature in either iWeb or iPhoto that lets me shrink my picture size? Thanks.

Like you, I also have iWeb 1.1.1 and publish to .mac as my host. I just did a test and created a test page within my 'Site 1' (Note, names have been changedc to protect the innocent, as Sgt Web used to say). It was the only page/site with the red color. When I clicked publish, the progress window said "Creating welcome", then "Creating Site 1", then "Creating Page 1" (that's first page in Site 1) then "Creating Page 2", etc through all 24 pages in Site 1. Then "Creating Site 2" followed by each of the 5 pages in Site 2. Then "Creating Blog" followed by each of the 4 entries in my blog.
so I conclude that you must be born under a lucky star, as I'm clearly not experiencing the simpler world that you are. I'm envious!

Can't change the color of text of links on my Welcome Page

I have a Welcome page with four links that happen to be text that I dragged over from my list of sites. I can change the text style and size but I cannot change the color from the default reddish brown.

To change the color of any hyperlinks, you need to select the link, go to the Hyperlink page, choose the Format option, and then select the color you want for Normal, Rollover, Visited and Disabled.
This should work.
You can also set the default colors and formats you want for all other entries on that same page.

I updated to os x 10.8.5 today and now I cannot publish changes to my web page through iweb. iweb crashes every time I try to publish

I updated to os x 10.8.5 today and now I cannot publish changes to my web page through iweb. iweb crashes every time I try to publish

First do the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
Next, in Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Hi my emails won't open it just says My account is already added then goes back to the welcome page

Hi my phone won't open my email account it just keeps saying my account is already added then goes back to the welcome page. I have used emails on this phone for over a year and they normally come straight up, can anyone help?

If you go into Settings > Mail, Contacts, Calendars and select that email account then is 'mail' currently set 'off' for the account ?

Won't Publish changes to "Welcome" Page

Similar Messages

Maybe you are looking for