Won`t publish to Facebook Timeline

Hi, I am trying to publish an album to Facebook from Lightroom 5, however its not happening for me. Initially I was able to ghet the images on FB, but they did not appear on my timeline, nor did they appear as an album, just in my photos and no-one was able to view them. I deleted the images on FB, and also deleted the collection in LIghtroom. Now if I try to re-publish, i just get an empty album on Facebook.
I suspect there is something wrong with the lightroom publishing manager, which is now set as `IOS photos` and will not allow me to change it as its greyed out.
If anyone has any suggestions, i would be grateful, thank you

I found the solution!
On facebook, go to your privacy settings. On the lower left, click on the edit option for "Apps and Websites". The first option is "Apps you use", click on edit settings. And then I'll bet you have the iPhoto Exporter on that list. Click the little "x" to remove it, click ok, and then you're done! Now you can go back to Aperture and successfully add a facebook account.
Hope this helps.
(also, in my limited testing the http vs https thing doesn't make a difference).

Similar Messages

Iphotos won't publish on facebook?

I have previously been able to post/publish photos from iphoto straight to facebook. Now when I go to Share - Facebbook it comes up with Do you want to set up iphoto to publish to Facebook? Cancel or Set Up. When I choose set up it open a small Facebook window, a blue bar moves (looks like it is loading the photos) and then finishes but only give me an option to Close. When I do, nothing happens, I assume the set up has happened and try to re: share them but asks me the same thing. Pls help?? There are no updates needed on my computer so unsure why this has stopped working for me?
Tks

Once I downloaded Yosemite the iphoto does not work anymore. So I went ahead and trash the app and attempted to reinstall.
Did you check, if iPhoto is really gone from the Applications folder? You should not be seeing an "Update", if you do not have iPhoto installed any longer. Make sure, it has been deleted from "Applications".
Then go to the main page of the App Store ("Featured") and search for iPhoto. If iPhoto is now showing as "Free", buy it for free to install it again.

Aperture won't publish to facebook.

whenever i try to upload content to facebook from aperture 3.1.1, i get a dialog box that asks me to log in. i provide my log in information and get the same error message every time:
"an unknown error occurred. please try again later."
this feature has never worked for me.
any suggestions?

I found the solution!
On facebook, go to your privacy settings. On the lower left, click on the edit option for "Apps and Websites". The first option is "Apps you use", click on edit settings. And then I'll bet you have the iPhoto Exporter on that list. Click the little "x" to remove it, click ok, and then you're done! Now you can go back to Aperture and successfully add a facebook account.
Hope this helps.
(also, in my limited testing the http vs https thing doesn't make a difference).

Lightroom 5, won't publish to facebook, error received is "An internal error has occurred: can't parse JSON at char 1 of..."

Plugin manager is showing that the FB plugin is "Installed, may not work", last diagnostic message was "This plug-in's post-processing task did not finish successfully". I've tried reloading it, as well as starting a new catalog.

I also have the same problem with the latest update 11.3.1.2x64. I followed all of the suggestions, cleared every last trace of itunes and apple of my windows 7 pc, no luck. I then downloaded previous versions from www.oldapps.com/itunes.php going back about 3 - 11.3x64, 11.1.5, 11.1.2 etc, same problem.
Did a system restore to before the uninstall, then itunes was back but wouldn't start because of missing files.
Uninstalled everything again! Same old same old. Tried Fixit as suggested, no joy.
Then I tried the suggestion of extracting and trying to install each individually, and all except AppleSoftwareUpdate.msi worked. Yay!! Thank you akessa!
This appears to be the offending snippet in the log file.
========= snip
Action ended 14:37:36: ExecuteAction. Return value 3.
MSI (c) (18:04) [14:37:36:910]: Doing action: SetupCompleteError
Action start 14:37:36: SetupCompleteError.
DEBUG: Error 2836: The control Back on the dialog SetupCompleteError can not take focus
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2836. The arguments are: SetupCompleteError, Back,
Action ended 14:37:38: SetupCompleteError. Return value 2.
Action ended 14:37:38: INSTALL. Return value 3.
MSI (c) (18:04) [14:37:38:475]: Destroying RemoteAPI object.
MSI (c) (18:E0) [14:37:38:478]: Custom Action Manager thread ending.
=== Logging stopped: 2014/09/08 14:37:38 ===
MSI (c) (18:04) [14:37:38:479]: Note: 1: 1708
MSI (c) (18:04) [14:37:38:479]: Product: Apple Software Update -- Installation failed.
MSI (c) (18:04) [14:37:38:479]: Windows Installer installed the product. Product Name: Apple Software Update. Product Version: 2.1.3.127. Product Language: 1033. Manufacturer: Apple Inc.. Installation success or error status: 1603.
======== snip

Iphoto will not publish to facebook. Why?

Why won't iphoto publish to Facebook?

Hard to say unless you provide some details - iPhoto version - OS version - error messages - etc
you can try this user tip and see if it helps - it has helped some
LN

Photoshop Elements 12: Unable to publish to Facebook

I just installed PE12 and tried publishing to Facebook. This worked flawlessly in PE9. PE asks me to authorize Facebook and I log in and receive a message saying that I am logged in. I then return to PE and "complete authorization". I was able to create an Album in Facebook from PE12, but the 9 pictures that appeared to successfully upload do not appear in Facebook.
Any suggestions?
Using Windows 7 Ultimate and recently upgraded from PE9 to PE12.

Did they copy over your programs and settings to the new disk? You can't do that with PSE (unless you do a total system clone).
If that's the situation, you need to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
And then go around and manually remove all the bits you can find from applications, hard drive>library>application support>adobe, and your username>library preferences and then reinstall from scratch. Note that spotlight won't help you with this, you have to do it yourself since spotlight is programmed to skip the files you want to find.

LR3 unable to publish to facebook - help

Think I put this in the wrong discussion thread first time round, Hope it works now.
I can't publish to facebook. Tried various collections and it won't work. Everything was fine last week.
Error message #1 "Failed to retrieve item info" apprears when I try to upload to facebook.
Error message #2 (could be a summary), "Warning, can't update this collection. Failed to retrieve item info.", appears as soon as I close the tab for Error #1,
Anyone has a solution?
Thanks,
Joe

Hi Julie,
I've been using LTR since Beta 1. I love this program and spend about 10 hours a day living in it.
I've been using in LTR 2 for years now and just downloaded LTR 3.3 4 days ago.
I wanted to test drive the Publishing tool for FaceBook. LTR will not let me select an ALBUM for FaceBook and I keep getting this error message
"Could not get album info from Facebook." and then this one also after I click to close that error "Can’t update this collection."
If you have a fix I'd like to know to give it a test drive. I don't know what to do to so if you can please help me out I'd be smiling again.
I'd like to volunteer or test drive the new fix
LTR 3.3
Mac 10.6.6
Firefox Browser 3.6.15
Thanks
Bryan

I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but can't it won't drag to the timeline. I'm using FCE

I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but it won't drag to the timeline. I'm using FCE

You cannot drag the effects themselves to the timeline. You add them to a clip in the Viewer, just as you have done.
If the clip was already in the timeline when you opened it in the Viewer (by double-clicking it in the timeline to open it in the Viewer) and then added the reverb effect, there is nothing further to do, you have added the effect to the clip. You don't drag it back to the timeline.
You only have to drag the clip to the timeline if the clip was not already in the timeline (for example, if you opened the clip from the FCE Browser; or set different In and Out points in a master clip to use a different portion of the master clip in a different location in your timeline).
Depending on the effect you add, you may have to render the timeline after adding the effect. But I don't think reverb requires immediate rendering. One other note, you said you were working with an audio clip ... audio clips need to be AIFF (not MP3 or something else) and preferably 16-bit stereo.

Won't publish my changes....

I use iWeb 09, published my site using MobileMe. It worked perfect. BUT now when I have made changes it won't publish my changes and the icons stays red. I tried Publish site, Publish site changes, Publish entire site. I successfully published my website to a folder on my HD. I updated Iweb, signed out of MobileMe, signed in tried again, over and over and over.... nothing works
Need help!
Thanks

Update: It's working now, for the time being. It's my experience that it's been working on and off for this past weekend up to now. I don't know if anyone else was experiencing problems in that time frame.
I spent that last weekend doing some significant changes to the site, adding a new logo, background and that coverflow animation you see on all the root pages. The site is comprised of 11 pages and 5 blogs, with many entires in each of those 5 blogs. I affected changes to each page, including all the blog entries, and then tried to publish yesterday morning. I think that's when the trouble really started, because I was publishing a high volume of pages at once – MobileMe doesn't seem to like that. This is when I started trying to move the pages to a new site within iWeb, which eventually crashed the program and caused all my early entries in all 5 blogs to get corrupted (that's what I'm calling it at least, because if I clicked on those entries I just got a blank white screen, and if I tried to publish before deleting them I got the "An Unknown Error Occurred" message each time).
What I'm interested in is your suggestion to use Cyber Duck. I've ran into this suggestion before on these forums and so, yesterday, I downloaded Cyber Duck, but am totally clueless on how to use it. I know nothing about FTP but would like to know if A.) will the site load faster going through an FTP service like Cyber Duck or (the other one I hear about a lot) Web Maestro; and B.) If it will make the site load faster, how complicated is the change over and could someone walk a FTP illiterate person like me through the process. I update the site daily and so I can't complicate the process of publishing too much. I hear Web Maestro has selective publishing, maybe that's the way to go?
Also, I've disabled comments on my site anyway, so no fear of that.
Sorry this ran a little long.
-Sam

IWeb won't Publish Site

Hi,
Everything works fine until I add a flash music video or any video to the page then it won't Publish. But if I remove the videos from the page it will Publish. (this is not an embed code but instead a link set up from the hyperlink menu when I click on the "inspector" dialog box.
Or should I instead use the embed code from my upload site?
Has this something to do with memory? I followed the advice that was posted on another "help" column to change the memory setting in the MobileMe page for iDisk, but that didn't work either.
iMac 24 10.5
4 gigs of ram

Hi,
Everything works fine until I add a flash music video or any video to the page then it won't Publish. But if I remove the videos from the page it will Publish. (this is not an embed code but instead a link set up from the hyperlink menu when I click on the "inspector" dialog box.
Or should I instead use the embed code from my upload site?
Has this something to do with memory? I followed the advice that was posted on another "help" column to change the memory setting in the MobileMe page for iDisk, but that didn't work either.
iMac 24 10.5
4 gigs of ram

Acrobat 3D won't publish with 3D controls in Powerpoint

Acrobat 3D won't publish with the 3D motion controls when published as a powerpoint packaged CD show or as Adobe Presenter files. Controls only appear in the native powerpoint PPT form.

I did a little more testing and here's what I found. If your
audio files reside on a network server (regardless of where your
presentation resides), the publish process will crash when trying
to access the audio. I had to copy my audio files from the server
to my hard drive and import them to the presentation. Then it
published ok. Go figure.

ISO Facebook Timeline PDF Viewer

Looking for viewer for Facebook Timeline that will display PDF (with embedded SWFs) in Full Screen mode.
The PDF I have created is formatted as a presentation, is is designed to be played in Full Screen mode. I would like to be able to enter an app in my personal Facebook Timeline, that, when clicked, will open the PDF.
There are also two pages/slides in the PDF that have interactive SWFs embedded. They need to be supported.
I have looked at Scribd and Slideshare, but am too much a newbie to all this to know what my best option is.
I would appreciate the advice of others who have already searched for and discovered an app or approach that will meet my needs.
TIA.

I don't have an answer, but I do have a question. Are you looking to control your own Facebook experience, or are you trying to control the app used by everyone visiting your Facebook page?

Help! The "publish" option is grayed out when trying to publish to Facebook blish to Fa

The problem is stated above - the grayed out option when trying to publish to Facebook...

Try the fix posted from Franchi Panchi in this topic: My publish button on iphoto is grey and...: Apple Support Communities.
OT

Some photos won't publish

i am using the Publish service (very cool!) to export photos to a specific location on my hard drive. the process is driven by a set of smart collections, and it all works great.
however, i have a handful of photos that won't publish -- they are sitting in the "new photos to publish" or "modified photos to re-publish" areas and they don't get published when i tell that collection to publish.
the publish service exports in JPEGs.
Some are NEFs, others are JPEGs, one is a PSD. All of the NEFs and JPEGs are virtual copies. the PSD is the original.
any ideas what's going on?

>@LKF: I can get CS3 to open files from LR 2, but it works differently than earlier LR releases. With LR 1.4 when I right clicked to edit in CS3 it gave me a choice of which version of the file to edit. It also paired the .psd file with the original .dng when I finished. Now with LR 2 it doesn't do either. Is this a design feature or is something hosed up.
Bug. Will be fixed in the next (first) update. For a workaround set Photoshop the be the secondary editor in the preferences and use it. If you are unclear on how to do this check here:
http://www.adobeforums.com/webx/.59b66d51/3
If you are really curious you can read a discussion of this and other 'Export to CS3' problems here:
mike beaumont, "Lightroom 2.0 will not export to Photoshop CS3" #1, 29 Jul 2008 12:30 pm
Your specific problem is discussed starting a couple of dozen (or so) messages into the thread.

Director 12 won't publish an iOS app

It was working fine (if lots of bugs appearing on the iPad) and then the certificate ran out.
I updated the keychain cert and the provisioning file and now it won't publish the .ipa file.
Anyone struck this?

There are other issues involving certificates...someone recommended checking the Keychain to make sure there are no duplicate certificates. Also suggested checking to see if there are any certificates in "root", because they should be in "login".
The reason I suspected the codesign phase in the IPA publishing sequence is because Director would progress with the process up until about 99% completion. With the Keychain "locked," the system gives the message asking for codesign permission. That, appearing at the very end of the publishing process, gave me some sort of clue but I kept thinking the certificates were mismatched when they were actually just fine.
It was only when I had the console utility running to see what was going on that I saw the reference to the Xcode path. I had already repeatedly deleted and reinstalled certificates. In my case the failure was because Director couldn't find the Xcode /Developer folder, wherein, I suppose, dwell the Xcode command line tools Director needs to finish the job.
Verbose error messages from Director during the IPA publishing process would be helpful to say the least. There are several places where publishing the IPA can fail.
Something occurs to me...forgive me if this is too obvious a question...but are you using certificates for iOS publishing or are you using certificates for OSX applications? They have to be iOS certificates and provisioning profiles. I assume that is what you have done but I bring it up just in case others may be trying to sign iOS apps with Mac development certificates. I confess that I am not an expert in these matters...
Another thing is to make sure there is an Apple Intermediate certificate in the Keychain. More detail here, near the bottom of the page.
https://developer.apple.com/library/ios/#documentation/IDEs/Conceptual/AppDistributionGuid e/CodeSigningYourApps/CodeSigningYourApps.html#//apple_ref/doc/uid/TP40012582-CH23-SW1

Won`t publish to Facebook Timeline

Similar Messages

Maybe you are looking for