Won't read file.

Adobe Reader is saying I need the latest version to read a file. I have the latest version and have read other files successfully. What might be the issue?

Are you opening a pdf from within a browser? If so, which one and what OS?

Similar Messages

Walkman won't read files on sd card xperia z2

Transferred music using media go on pc. However Walkman won't read or play files. They do work as I have tried card in old phone and my laptop and ps3.
Any ideas
Solved!
Go to Solution.

Anytime
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Read from text file vi won't read file...

I am very new to LV programming so I hope you forgive any stupid mistakes I am making.   I am using Ver. 8.2 on an XP machine.
I have a small program that stores small data sets in text files and can update them individually or read and update them all sequentially, sending the data out a USB device.   Currently I am just using two data sets, each in their own small text file. The delimiter is two commas ",,".
The program works fine as written when run in the regular programming environment. I noticed, however, as soon as I built it into a project that the one function where it would read each file sequentially to update both files the read from text file vi would return an empty data set, resulting in blank values being written back into the file. I read and rewrite the values back to the text file to place the one updated field (price) in it'sproper place. Each small text file is identified and named with a 4 digit number "ID".   I built it twce, and get the same result. I also built it into an installer and unfortunately the bug travelled into the installation as well.
Here is the overall program code in question:
Here is the reading and parsing subvi:
If you have any idea at all what could cause this I would really appreciate it!
Solved!
Go to Solution.

Hi Kiauma,
Dennis beat me to it, but here goes my two cents:
First of all, it's great to see that you're using error handling - that should make troubleshooting a lot easier. By any chance, have you observed error 7 when you try to read your files and get an empty data set? (You've probably seen that error before - it means the file wasn't found)
If you're seeing that error, the issue probably has something to do with this:
Relative paths differ in an executable. This knowledge base document sums it up pretty well. To make matters more confusing, if you ever upgrade to LabVIEW 2009 the whole scheme changes. Also, because an installer contains the executable, building the installer will always yield the same results.
Lastly, instead of parsing each set of commas using the "match pattern" function, there's a function called "spreadsheet string to array" (also on the string palette) that does exactly what you're doing, except with one function:
I hope this is helpful...
Jim

Cannot see optical drive or read files from superdrive

This is my first ever posting so I apologize if I’m giving too much info.
A couple years ago I installed a Pioneer DVD-RW DVR 107D in the top bay of my G4 (mirrored doors) and put the combo drive (Philips CDD5105) in the bottom bay. Back then I was running OS 9. All worked well, and continued to after I decided to start using OS X. I continued updating all the way up to 10.4.8 (I have avoided updating to 10.4.9 since it caused issues on our IBook). About a year ago the combo drive would come and go (in the system profiler) but the super drive was still working fine. Over the past year strange things began happening. If I would insert a kids games CD it would cause a kernel panic. So I simply used our Ibook to let my daughter play reader rabbit. For about the past 6 months the combo drive has not been recognized in system profiler. But other than the kids cds the super drive seemed to be working well reading & writing both CDs & DVDs. Then it began to error out burning CDs saying they could not be verified but the CDs were turning out ok it was burning DVDs without a problem. Within the last couple weeks it stopped recognizing files correctly. If it is an image or ai document it would say the files could not be opened and it would also not open installers of any kind. I finally decided to try to get it fixed. Last weekend I ran Tech tool & optimized the hard drives and low and behold it was fixed. Combo drive was back & working, Super drive was working correctly & the kids CDs did not cause problems either. This lasted for about 4 days of very infrequent use and all the problems were back. Then yesterday after being off for a couple days I started it up and all was ok again. So I left it on over night planning to make a disk image of it today. At this point I had a theory that my set up might be causing the problem. Since I had been running OS X it was installed and running on a second hard drive I had installed connected to a slave bus while OS 9 was still on the original hard drive connected to the master bus. So I cleaned off the main hard drive and thought since it was working correctly I could transfer the system & apps to the other hard drive and save the working disk image. But of coarse in the middle of transferring files around the combo drive vanished again and the super drive won’t read files correctly. So I decided to reinstall from my OS 10.4 DVD on the main hard drive and reinstall all my apps. But I can’t get it to read or boot up from the DVD. I tried running Tech Tool again with no luck.
Could this be as simple as a bad preference or something?
Here are the machine specs
Machine Name: Power Mac G4
Machine Model: PowerMac3,6
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 2
CPU Speed: 867 MHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 1 MB
Memory: 1.75 GB
Bus Speed: 133 MHz
Boot ROM Version: 4.4.8f2
PowerPC G4 dual 867 Mac OS X (10.4.8)

The only thing that seems strange about it being the drives is that whenever the combo drive disappears from the menu the super drive will simultaneously not read files correctly and cause kernel panics etc. And when the combo drive can be seen both drives work with no problems. Would that system still point to failing hardware? It just seems that since it's either both or neither that something that effects them both would be the culprit. Since I posted I was able to reload tiger & after the restart the problem returned. Then another restart it was fine all day. To your point replacement drives are reasonably priced & easy to install so I probably should just get one & try it.
Thanks for your advise
Carl

Palm Desktop 6.2 won't read data file after IR synch with IIIC

I have Windows 7, an old IIIC, and Palm Desktop 6.2. Since I can use a USB with that combination, I synced with an infrared connection. The files made it to the Palm directory, but the desktop program won't read them. My previous version of Palm Desktop allowed me to search for the data directory, but I can't find a way to do so with 6.2. And, no, the older version wouldn't display the data, either, in spite of my specifying the path.
I'm so close! One more step and I won't have to buy a smart phone and pay a monthly fee to carry around my contact date. Please help.

Palm Desktop 6.2.2 is not an upgrade to 4.x! It was designed to fix the things Microsoft broke when Vista was born.
It lacks many features that existed for many years in the 4.x versions.
I'd suggest doing a Clean Uninstall and reinstall your original version!
http://forums.palm.com/t5/Windows-HotSync/Instructions-for-a-Clean-Uninstall-of-Palm-Desktop-on-Wind...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Adobe photoshop elements 11 won't read my canon T5 raw CR2 files.

adobe photoshop elements 11 won't read my canon T5 raw CR2 files.
why?
need help!
Solved!
Go to Solution.

Hi Zach.
Sorry to say but Elements 12 came out several months before your camera. Adobe stops updating camera raw files for old software editions so that people have to buy new versions of the software when they get a new camera. It happened to me with LR3 when I got a new camera.
There are works rounds but they are a lot of extra steps and I think you would be converting the files to Some format other than RAW (tiff?) and which I am not sure will perform the same.
I think you just need to get a newer version of Elements.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

Adobe reader won't open file

Bought a new computer last Jan. since then Adobe won't open files , tells me : either not a supported file
or file dammaged / eg. sent as an email , not correctly decoded. Can you help. ML

Please provide a detailed description of your problem. Platform? OS and Reader versions? Where are those files? How are you trying to open them? Could you open them before?

Itunes won't run: "file itunes.itl" cannot be read because it was created by a newer version of iTunes

Disk was reimaged due to a virus infection. For some reason downloads of new 10.6 version failing, so tried stored install file for 10.4. Now have 10.4, but it won't read the library file. Any suggestions?

Stop trying to use an old version of iTunes.
Install the latest version from http://www.apple.com/itunes/download

DNG Converter suddenly stopped working, won't read NEF files

Hi all, I'm new here, but am looking for some help.
I currently am on a mac book and run photoshop CS3. I've been shooting with a nikon d700 in raw. When I upload the photos to my computer I've previously run them through the DNG converter without a problem. Now, for the past two days it has just stopped working. When I try to convert the NEF files, they are just greyed out, I can't select anything. I tried reinstalling the DNG converter, but still no luck.
I never had any issues with it before, and now it suddenly won't read my files. Any ideas what could be wrong?
Thank you!

nfietz wrote:
…When I upload the photos to my computer I've previously run them through the DNG converter without a problem…
Had you run the DNG on a Mac before? On the Mac, the DNG Converter works on folders only, not on individual files (unless you use the Finder to drop the icons of your raw files on the DNG Converter application icon). From within the application, using File > Open, the icon and names of individual raw files will always appear grayed out.
You need to target the folder that contains the files you want to convert.
CAVEAT: all eligible files in the folder will be converted, including any and all DNG files that may already be contained in the folder. So if you have any DNGs in that folder, they will also be converted again and the original DNGs may be overwritten.
Wo Tai Lao Le
我太老了
Message was edited by: Tai Lao

Compiler won't read modified files

Does anyone know why Flash would suddenly stop loading
recently saved class files?
Until now, I've been able to make changes to an Actionscript
file, save the file, and then test the SWF to see the changes.
Now it seems as though the modified files are not getting
read by the compiler. To see the changes, I need to restart Flash
(even then, there's no guarantee).
My guess is that I've inadvertantly changed a setting
somewhere.
Anyone know what gives?

Aperture 3.5.1 and the camera is the Olympus OM-D E-M5.
And yes, Aperture will convert the RAW/ORF files but the devil is in the details. And since you asked (sort of), here are the details:
I own and have happily used Photoshop CS4 for the layered compositing I like to do, but it won't support ORF files
I tried importing/converting them in Aperture then editing in PS4 ... but Aperture 3 and PS4 don't play together well, so many come back as "unsupported file format"
Apple can't fix the problem and Adobe no longer supports PS4... put another way, Apple can't do anythig but they care, and Adobe could do everything but they don't care
It got worse when I upgraded to Mavericks, so to get around that I had to upgrade to Photoshop CC and pay the monthly "rental"
Aperture and Photoshop now work, but the demands of running them both are beyond my aging iMac that can't be upgraded, so I have to buy a new one, but the monthly fee (which everybody assumes will only go up in cost) + purchase of a new iMac for a guy on a fixed income are too much
So, I thought if I used DNG to convert the ORF files I could import them into Aperture for all the basics and organization, then use PS4 for the compositing... but Aperture won't read the DNG conversions.
And that, as the man used to say, is the name of that tune,
Brian

Cwm won't read configuration files

i built cwm from source and it won't seem to accept configuration. either from ~/.cwmrc or -c /path/file.
i've tried various different .cwmrc's, from full configs to just one bind, but it won't seem to take it.
any tips from cwm users on what i might be doing wrong? google hasn't yielded any answers.

Did you build cwm or cwm-git? The plain cwm in the AUR won't read .cwmrc; you need to use cwm-git. If you did not buld from the AUR, where did you get the source?
Last edited by 2ManyDogs (2013-10-03 17:33:18)

Photoshop CS5.1 won't read raw files from Canon EOS M

Photoshop cs5.1 won't read raw files from canon eosM, what to do?

The EOS M requires at least Camera Raw 7.2 but Raw 7.2 is only compatible with CS6 or higher (CS5 is only compatible up to Raw 6.7)
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
To open and edit Raw files, either upgrade to CS6 or join the Cloud and get the CC version.
Alternatively convert the Raw files from the EOS M to DNGs using the free DNG converter then edit the DNGs in CS5.1
http://www.adobe.com/products/photoshop/extend.displayTab2.html
See also the Camera Raw FAQ
http://forums.adobe.com/thread/311515?tstart=0

Photoshop CS won't read 5.2 DNG files

I recently had a student use the stand alone DNG converter V.5.2 on his Canon 5D Mark II raw files but Photoshop CS won't read the resultant .dng files. Our copy of CS3 reads them ok but he only has CS and neither his version of CS nor ours will read the files. My understanding has been that .dng files can be read by any version of Photoshop that works with Raw files. Is this no longer true? Or was it never true? Thanks.
-dave-

Hi Thomas,
Installing 2.4 took care of the problem. Boy, does the CS version of Camera Raw seem crude compared to the full featured version you've given us now. I remember it as being pretty impressive at the time but I sure wouldn't want to have to go back to it. I think I've convinced the student how much he's missing out on by not having CS4 but at least he'll be able to work with his Raw files until he upgrades. Thanks for your help.
-dave-

CS4 won't read Canon T1i raw files

CS4 won't read Canon T1i raw files. Is this a known problem? Is there an update or plugin that I need to download? If so, where can I find it? Thanks for your help.

T1i support was added in Camera Raw 5.4. It sounds like your Camera Raw may be out of date.
From within Photoshop, choose "Updates…" from the Help menu. It'll do its thing and eventually Adobe Updater should tell you updates are available. Run through that install process and you should be set to go.
Note that you will have to quit Photoshop during the installation process, so make sure all your work is saved.

I can't figure out how to update camera raw. Elements won't read my ARW. files.

Help? haha Elements won't read my ARW. files. It says to update camera raw but I don't know how.

What camera model do you have? What version of Elements are you using (Help / About Photoshop Elements) and what version of Camera Raw are you using in Elements, now (Help / About Plug-in / Camera Raw)?
These questions are relevant because each camera model must be supported individually and Adobe only adds support to currently available products.

Won't read file.

Similar Messages

Maybe you are looking for