Won't read my A/V device when I open up Final Cut HD

I had been using Final Cut Express for a while and decided to upgrade to final cut pro. I now am running Final Cut Pro HD. When I go to open a project, it will not read my Firewire connection to my DVX100 panasonic camcorder. We tried with a canon xl and it still won't read the A/V device. I've connected some external harddrives to the firewire ports and they all seem to work. So I don't know why final cut says the Firewire connection is missing. Can some please help fast.
THanks

You might want to check this article
http://docs.info.apple.com/article.html?artnum=301852
rh

Similar Messages

ITunes 11.1.3.8 won't read contents of any device

Using Win8, iTunes won't read contents of any device. using 11.1.13.8
Have seen many fixes for it.
Need help. Newer computer with new install. New iPhone and iPad Retna
Please help if you can.
Thanks

What do you mean "iTunes won't read contents"?
What specifically is happening?
Was the ENTIRE iTunes folder copied from the old computer to the new computer? iDevices are not and have never been backup devices or a way to move content to a new computer.

I have installed adobe reader onto my Mac but when I open up an adobe pdf it tells me that i need to accept the end user license agreement, quite, and then open up a new browser but i have never seen the end user license agreement. What should I do in ord

I have installed adobe reader onto my Mac but when I open up an adobe pdf it tells me that i need to accept the end user license agreement, quite, and then open up a new browser but i have never seen the end user license agreement. What should I do in order to accept the end user license agreement even though it never pops up when i install adobe reader?

Make sure Readr is closed. Go to the Applications form, look for the Adobe Reader icon, double click on it, and follow the lead. Restart Reader when finished.

Disk utility will not boot using COMMAND R. It won't give me the 'ERASE' option when I open Disk Utility. How do I wipe my hard drive?

Disk utility will not boot using COMMAND R. It won't give me the 'ERASE' option when I open Disk Utility. How do I wipe my hard drive?

If you're truly running 10.6.8, there is no Recovery partition - that didn't come along until 10.7x.
You'll need to use the set of gray discs that originally shipped with your model. If you don't have them, you can always get your serial number from the bottom of the casing and call Apple to get a set of replacement discs. These will run you about $20 + shipping & taxes. Once you have the discs, boot from Disk One and use Disk Utility to erase your HD and then reinstall whichever version of OS X that shipped with your model. No way around of getting the discs.
Clinton

My screen won't roll on my iphone 4 when I open my Facebook App

My screen won't roll on my iphone 4 when I open the Facebook App. It was working fine yesterday and will pull up the recent info when I open it now. But the screen won't roll down. Help?

i'm having the same problem. They all were there at first..now they are not

When sending job from Final Cut Pro to Compressor using local QCluster

When sending job from Final Cut Pro to Compressor by way of Share and using the local QCluster, the audio renders, but the video errors out saying something along the lines of Can not locate file.
If I use 'This Computer' it works fine.
What gives?
Fresh install of OS and FCS.
Thanks!

I'm just learning the intricacies of Compressor and Qmaster myself, but I have learned that when you use Qmaster you can not share directly from FCP. You must export a Quicktime movie (reference movie seems to be fine) and input that to Compressor. This is only an issue when using Qmaster, as you've seen.

When trying to purchase Final Cut Pro X from the App store receive following error msg - There was an error in the App Store. Please try again later. (100) - Am running Quad Core Xeon w/ 32GB Ram, ATI Radeon 5870

When trying to purchase Final Cut Pro X from the App store receive following error msg - There was an error in the App Store. Please try again later. (100) - Am running Quad Core Xeon w/ 32GB Ram, ATI Radeon 5870

Try again later . . . . in an hour or so, not immediately.

HT201109 When I download my Final Cut project onto a DVD 3-4 photos are continually repeated throughout the presentation. If played back via the computer there is no problem

When I download my Final Cut pro project onto a DVD about 3-4 photos are continually repeated throught the presentation. If I play back via the computer this does not happen. It is the same photos repeated. I have taken loop off from view. Any assistance ?

I have two projects one with DVD and photos and the other just photos. The DVD is 20 mins and the photos just 8 mins.
I have tried to burn from the share dropdown menu ( DVD ) in FCXP and also tried download to media browser then used DVD creator to produce the DVD but the problem exists with both actions. I deleted the repeated photos from the presentation but another 3-4 different photos repeat. I hope this makes some sense .
thanks salty777

HT1351 my itunes won't recognize my ipod in devices when I have it connected to my computer? How do I get it to sync? it is a ipod classic

I have a ipod classic and my itunes will not recognize it under devices when I have it plugged into my computer. I have restored the ipod and itunes is up to date on my computer. I have not been able to get my music to sync onto this ipod. Thanks for the help

If the iPod was not recognized by iTunes, how was the Restore performed?
The latest iTunes may hide the sidebar. This may be confusing to long-time iTunes users. If you don't see the sidebar on the left side, go up to the menu bar. Under Views, select Show Sidebar.
With the sidebar visible, do you see the iPod under DEVICES?

I have uninstalled and reinstalled the most current edition of Adobe Reader, including the patch. When I open a PDF file, the screen is first grey, then viewable, but the message "Adobe Reader has stopped working" comes up. How do I remedy this?

I have uninstalled and reinstalled the most current edition of Adobe Reader (11.9), including the patch. When I open a PDF file, the screen is first grey, then viewable, but then the message "Adobe Reader has stopped working" comes up. How do I remedy this?

RR,
One thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way (remember to tick Paste remembers Layers in the Layer palette flyout/dropdown first, and to untick it afterwards).
Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
and another similar website,
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
As far as I remember, the former is for Win and the latter for Mac.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
Failing a full recovery, hopefully you have one or more earlier versions and/or bits of artwork saved before it happened.

No sound on clips when importing video in Final Cut Pro X

I recently got a new Mac Pro tower and installed Final Cut Pro X in it. I have imported 4K media into my library and since the footage was located in the same drive, I left the files in place and created proxy media to make the editing easier and faster. But every time I try to do a batch import, the video files appear to have no audio...the audio is missing within Final Cut Pro X.
Yet, when I look into the library files (in the finder, not through Final Cut) and find the transcoded proxy files, they do have audio.
I have had to delete the files from Final Cut, then re-imported them either one at a time or in batches of no more than five shots a a time. Very cumbersom and a waste of time.
Is there a fix for this?

Hi Russ. The video and audio were originally recorded with a Sony NEX FS700 R camera with its 4K Raw being transcoded to 4K Apple ProRes HQ by an Odyssey 7Q recorder.

Im getting the message "The selected SAN location is already in use." This happens when I start up final cut pro 10. Anyone else have this problem before?

Hi everyone. I just today got the message "The selected SAN location is already in use." Has anyone recieved this message before? If so, how can I fix this?
Thanks!

Welll I don't see fast how to edit my reply. (the projects and events on external drives show up, but there is a error when FCP-X started up with the message that the "home folder user" is in use
and can not be used by SAN becase of the same name????)
First I did use Preference Manager 3.2 to trash the preference but that did not solve my problem.
Then I repaired permissions. I did not solve the problem.
Waht solve dthe problem is next.
I started my MacBook Pro is safe mode (shift power on) Then I repaired permissions.
Then I copied the Final Cut Events en Projects folders from my home folder Movies to a external dive (in a folder so that with start up it did not show up in. (And trashed the project and event folder in my movies folder)
I restarted the Mac Removed again the Preference.
Then I restarted FCP-X and it started up without a problem.
Then I copied the content of my old folders to the new folders in my movies home folder. (not just the folders Final Cut Events/Projects)
Now it is working correctly.

Logic crashing when importing OMF from Final Cut

Greetings, an editor of a 20 minute short film exported a 16 bit 48 k OMF from Final Cut Pro that I imported no problem in Logic Pro 7.2.
Then, he made some new cuts to the video so he exported a new OMF at 48 k, 24 bit ... this did not import properly. Logic kept "unexpectedly" crashing when importing the composition part of the OMF, every time crashing on one specific file.
So, he exported another OMF at 48 k, 16 bit (because we thought it was a problem with 24 bit) but the same thing keeps happening .. I absolutely cannot import these new OMFs, they keep crashing Logic while importing the composition aspect of the OMF at one specific file ... but, I can still import the original OMF ... there is something wrong with the new OMFs I think ..
Does this sound familiar to anyone? is there something wrong with the way he may be exporting the OMF from Final Cut? .. any suggestions or work arounds would be incredibly appreciated ...

Probably the editor is using sounds with mixed sample rates in the new OMF !

Do your project files save when you update/reinstall Final Cut Pro X?

Final Cut has recently started to act up when it comes to sharing. It is only allowing Master Files while any other destination either freezes or stops itself after 5 minutes
I realize that a simple reinstall will probably fix it but will my current projects still be there?
Do I have to copy them on a back up folder or drive?
Same questions if it's just an update
Thanks in advance

The Libraries, Projects and Events are all kept separately from the FCP X app so you can do whatever you want with the app and your work will be untouched.
Trash FCP X properly with this free app
http://www.digitalrebellion.com/fcsremover/
"Updates" are in fact complete reinstallations . . . the whole app is completely replaced . . . . no messing about adding bits here and there as in the old days.

I taped video in 1920 by 1080 but when i edited in final cut pro it reset to 640 by 480 why?

what gives? i my last video edited came out just fine in HD 1080p so why is it not doing it again? please help! a million thanks in advance.

A couple of things could be going on here:
When you created the project, what "settings" did you choose?
If you shot in 1920 x 1080p, and then if you toggled the "set based on first video clip," it SHOULD have defaulted to 1080--if... "IF" the first clip was, indeed, such material. However, if you FIRST added in a different sized clip (640x480) to the timeline OR checked the "custom" box, then you changed the aspect ratio unintentinally.
When you open the project library, what does the INSPECTOR say about the settings?
If it does not say 1920x1080, then it--obviously--is not in the ratio.
All is not lost.
Do this: Open up a NEW project. This time CUSTOMIZE the settings in the dialogue box to 1920x1080. Then, cut / paste the material in the timeline from your OLD project into this NEW project (with the 1920x1080 setting.)
See if that does the trick!

Won't read my A/V device when I open up Final Cut HD

Similar Messages

Maybe you are looking for