Won't read profile

HELP!  My laptop will not connect with my access point.  The error message says that it can't read my profile.  Any suggestions.  My laptop is at home...I'm in the office.

It seems that the utility in the Laptop is not configured properly ....... open the utility create the profile ..... use the same settings as in the router ..... make sure the network name & security key (if you are using the secure network) ...... should be correct ....
 Reboot the laptop & see if it shows connected status under wireless connections or not ......

Similar Messages

  • I have a Olympus C-3000 and it won't read in the new iphoto.  It reads in my old version on my older computer.  Is there a driver I need or something else?

    I have a Olympus C-3000 and it won't read in the new iphoto.  It reads in my old version on my older computer.  Is there a driver I need or something else?

    Yes, different computers, different OS's, as stated, does not work on any machine except PPC.
    Nothing in console logs.  Does not show up in USB under system profiler.
    Level 1 tech support.  "May be this" or "may be that", but all a waste of time unless someone has the actual camera and can independently verify my results.
    If it were just a matter of it happening on one machine that would be one thing.  The fact that it only does not work on Intel based machines (and thus Snow Leopard and Lion) it is a pretty good indicator that something is missing in the OS.

  • Mac Mini won't read my external drive

    Bought a Seagate 500GB external harddrive for my mac mini, and stored about 100GB of information in the harddrive. Now, the mini won't read the external harddrive. I am wondering if there is a way to retrieve it... Can someone help me? I don't think I can afford to loose 100GB of information.... Any help is greatly appreciated!

    Clearly it has worked previously since you have data on it, but you haven't indicated what model of Mac mini you have (which can make a difference in terms of troubleshooting steps) and what circumstances surrounded the 'disappearance' of the drive - particularly as Boece says, whether it was disconnected (or powered down) without being first ejected from the desktop.
    If the drive isn't being seen in the profiler, there is a possibility that the drive is not, in itself, faulty. A damaged cable, a faulty hub or a problem with the system's USB ports could be responsible. Since you don't give any detail about your system, it's hard to focus better on advising appropriate steps - however, if you are using a hub, remove it and connect the drive directly to the system, preferably using a different cable. If it mounts, then it was the cable or hub. If not, then open Disk Utility (in Applications>Utilities) and see if it appears in the drive list on the left.
    If there's no hub and the cable checks out OK, then you might next perform a PMU reset (if it's a G4 mini) or SMC reset (if it's an Intel).
    To reset the PMU for a G4 mini
    - Unplug all cables from the computer, including the power cord.
    - Wait 10 seconds.
    - Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
    - Let go of the power button.
    - Press the power button once more to start up your Mac mini.
    To reset the SMC on an Intel mini:
    -From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
    -Unplug all cables from the computer, including the power cord and any display cables.
    -Wait at least 15 seconds.
    -Plug the power cord back in, making sure the power button is not being pressed at the time.
    -Then reconnect your keyboard and mouse to the computer.
    -Press the power button on the back to start up your computer.
    If those steps don't help resolve the problem, post back with more information.

  • Esx24 sampler won't read my files or aliases..

    the esx24 won't read audio alisases from my sampler instrument folder. it doesn't matter whether the original file is saved on my desktop or and external drive. tech support seems to think it's a logic configuraton problem. can anyone help?

    Look at your System Profiler
    Apple in upper left corner>System preferences>About this Mac>More Info>System Report>Hardware>Disc Burning
    is the DVD drive being recognized here?
    Also >>>>>Hardware>Serial-ATA
    is the drive being recognized ?

  • Optical Drive won't read 90% of CDs

    Hey, I'm having problems with the Toshiba ODD-DVD SD-R1412 optical drive on my eMac 1GHZ where it won't read or burn 90% of CDs or DVDs. The problems started happening after the 10.4.9 update. I've tried a laser lens cleaner and it didn't work. I'd upgrade the burner but it's gonna be a royal pain to have to crack this thing open. Any suggestions to get the drives mounting again? It shows up in Apple System Profiler.

    Did you upgrade to 10.4.9 via Software Update or by downloading and running the stand-alone OS X Update Combo 10.4.9 (PPC)? if the former, try the later --- while not as consistiently useful a trick as in 10.2/10.3 days, running the full Combo updater has been known to help with various oddities that crop up after an OS update. Similarly, running Disk utility -> Repair permissions on the hard drive isn't really needed after running Apple updates, but it can't hurt, and if you've ever run a third-party installer that asked for an administrative password, you definitely want to run Repair Permissions.
    How old are the blank discs you're trying to burn? How were the blanks stored? Refer to the NIST's Care and Handling of CDs and DVDs (people have reported in the past storing blank CDs on top of a radiator under a window getting direct sunlight; you may want to try a few blank discs from a different spindle (say by trading blank discs with friends or co-workers).

  • DVD drive won't read disks at boot

    I have a Paviliton DV6-2113sa running Win7 HP  64bit. 
    I removed Acronis True Image and when I rebooted I got a BSOD at the point when the coloured balls should merge into one.
    I thought OK, put the system repair disk into the DVD drive and boot up, but the drive is failing to read any recovery dosks. I think the drive has packed up as I haven't used it for some time.
    Can I use any replacement drive in this model or must I get the same one again?
    The drive light flickers as though it is reading data but it doesn't 'spool up' to speed and I don't get the 'press any key to load from DVD'.
    The BSODs are a seperate issue which I think running a system repair will fix but I can't as the drive won't read data.
    Is it possible to put the repair disk files onto a 4gb USB stick and if so, how do I do it?
    Thanks.

    Hi Peeps
    I had exactly the same problem with my Macbook, again from the UK. Really weird though as would intermittantly read DVD film's which worked fine previously.
    Well.... Took it to my local Apple store and saw a genius and anyway they replaced the super drive and logic board (surprised about the logic board!).
    But just got it back today and the DVD drive is completely fubard so is being returned tomorrow to get this sorted!
    Moral of the story, sounds like a drive or board problem. Will keep you updated when I get mine back
    Macbook 2Ghz, 512Mb, 60Gb, Superdrive   Mac OS X (10.4.7)  

  • Hp pavilion dv4-1123us Media Card won't read

    I have a hp Pavilion dv4-1123us laptop that won't read a 16 GB SDHC media card. The card works in my PC, so the card is good. I have a Scandisk 5-1 media reader hooked to my home PC that would not read it but I found through Scandisk site I needed to download the latest Firmware which I did and now the card works on my PC. The reader has always and still does read a 512 MB and a 2 GB XD cards on my laptop. I am running XP Pro OS.
    I have searched the HP site for driver downloads but only see them for Windows 7 and 8 not XP.
    Can someone help me on this?

    Hello wgray826,
    You’re having a problem not being able to read a 16GB SDHC card.
    I think that your computer does not support the SDHC card.
    Here is a link to your user guide and what cards it supports.
    I noticed that it shows the Secure Digital but not the Secure Digital High Capacity.
    Clicking the White Kudos star on the left is a way to say Thanks!
    Let me know how everything goes.
    Have a good day.

  • How do I set up an external MIDI input on the new MacBook Pro? Mine won't read it.

    I've been trying to set up my TASCAM US-600 on my new MacBook. I've never used a Mac before so I'm not sure what's wrong. I tried installing the drivers and when I plugged in the interface, it wouldn't read the device. I now have the interface plugged in through a USB hub. The Mac now reads TASCAM software but when I go to the system preferences, the Mac won't read the MIDI input. So all in all it's been a big pain in the ***. Are there any Mac experts that may know what the problem is or how to help? Thanks!

    are you sure its mini display port? MDP and thunderbolt are the same port.
    for referenece, this is mini DVI (obsolete)
    Kobushi-mini-dvi.jpg
    This is mini display port
    Mini_displayport.jpg

  • Palm Desktop 6.2 won't read data file after IR synch with IIIC

    I have Windows 7, an old IIIC, and Palm Desktop 6.2. Since I can use a USB with that combination, I synced with an infrared connection. The files made it to the Palm directory, but the desktop program won't read them. My previous version of Palm Desktop allowed me to search for the data directory, but I can't find a way to do so with 6.2. And, no, the older version wouldn't display the data, either, in spite of my specifying the path.
    I'm so close! One more step and I won't have to buy a smart phone and pay a monthly fee to carry around my contact date. Please help.

    Palm Desktop 6.2.2 is not an upgrade to 4.x!   It was designed to fix the things Microsoft broke when Vista was born.
    It lacks many features that existed for many years in the 4.x versions.
    I'd suggest doing a Clean Uninstall and reinstall your original version!
    http://forums.palm.com/t5/Windows-HotSync/Instructions-for-a-Clean-Uninstall-of-Palm-Desktop-on-Wind...
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • ITunes won't read ID3 tags that Windows sees

    I recently switched my library over from a Mac laptop to a PC desktop. I have about 70 GB of perfectly organized music accumulated over years and years.
    In the process, after I loaded some songs into iTunes (using the Keep My iTunes Folder Organized and all that stuff), I noticed that about 10 GB of music were without titles, artists, or album info, and just displayed the name of the MP3 file (so like instead of displaying 15 Step by Radiohead from In Rainbows, Track 1 it displayed "01 15 Step" in the Title column only).
    The problem is that when I navigate to these songs in Windows Explorer, not only do I see all of the correct ID3 information, I see the extras like Album Art have loaded perfectly as well. I can play these songs in Windows Media Player and the ID3 info is perfect.
    Does anyone know why iTunes won't read these ID3 tags or how to get iTunes to read them?

    I am also having the same problem with about 200 of my MP3s. The tag info shows up perfectly using QuickLook on Leopard, but in iTunes I can't see any of the info. I have tried converting the ID3 tag version, revesing the unicode....nothing.
    Have you had any luck?

  • CD/DVD drive won't read any CDs or DVDs

    Whenever I insert a DVD, CD, or CD-ROM my computer won't read the disc. The computer starts making noise like it is reading the disc but then it stops. It tries 3 times (starts and stops) and then just spits the disc out. I can't watch movies, install software, etc. How do I fix this.

    Before taking it or sending it anywhere I'd first try resetting PRAM…
    http://docs.info.apple.com/article.html?artnum=2238

  • Drive won't read any dvd ejects it automatically

    My drive Won't read any kind of DVDs, it keeps ejecting automatically after spinning for a while. it's been going on for a while now. please help!!!!!

    You can try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    and PRAM How to Reset NVRAM on your Mac - Apple Support
    If that doesn't help you can try a cleaning disc or a quick shot of canned air. It's likely though that your drive has failed, it' not all that uncommon. It that is the case you can either replace it or have it replaced but it's far cheaper just to buy a usb external drive....just not Apples because it won't work with macs with a built in drive working or not. .

  • Pavilion DV4-2161nr CD/DVD drive won't read or burn

    I recently had my Hard Drive changed in my HP and the CD/DVD drive was working fine...then about a month ago the door won't open and it stopped reading every cd/dvd i put in...it won't read blanks or movies or audio cds/dvds...I also have a yellow question marke by PCI Device...CAN SOMEONE PLEASE HELP ME?

    do you have the win 7 cd handy, try to boot into the discs and see whether that works, this will tell you whether that is software or hardware problem. Such failures do occur, due to ageing of laser. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Hp pavilion cd/DVD drive won't read discs

    My pavilion G6 G6 2295sa won't read cd/DVD but will play DVDs with cyber link I have gone through the suggested routes when I put in the error code E:\hp DVD-RAM UJ8D1 H.01 please help.

    Hi Primhak,
    Welcome to the HP Forums! I need to clarify a couple of things the optical drive (CD/DVD drive) is playing DVDs but won't CDs is that correct? What is this error code that you are talking about? What operating system are you running?
    Finding your OS:
    http://windows.microsoft.com/en-CA/windows/which-o​perating-system
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • MacBook CD/DVD drive won't read disc

    I have a Apple MacBook MC207LL. I have run into a major problem. My CD/DVD drive won't recogonize a disc when it's inserted (I have to force eject it). Disk utility shows that there is a disc present in the CD/DVD drive.
    My major issue is that I erased my partition so I can have a clean install of my laptop. Now I can't reinstall the OS because it won't read the disc or a USB.
    Is there a way to use Terminal to force it to read my data on the disc?
    Otherwise I am stuck with an empty computer that I will never be able to use I have done research on this and nobody has run into this exact problem as me. If someone can take their time to help me out that would be greatly appreciated.

    I am having the same problem, but now mine wont even notice that the disc is there! I wouldsay take it to the genius bar.

Maybe you are looking for