Won't recognize 16gb sdhc - no problem in any other computer
my 16GB SDHC card mounts instantly in every other computer, but my MacBook Pro (early 2011 - Lion OS 10.7.2) does not see it. I also have Windows 7 on this machine, and the SDHC card is not seen in Win 7 either. Other SD cards mount with no problem.
Hi A,
I would also give Apple feedback: http://www.apple.com/feedback/
Some people have been able to use certain card readers even when it isn't read in the builtin card reader. Some other people have been able to get it to work by inserting it fully, then pulling it out very slightly, or not inserting it 100% of the way in.
Similar Messages
-
I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets on the network have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer. Yet Network control panel says I am connect to the modem, and Network Diagnosis says I am connected to the Internet. It's like the blind man who has eyes that cannot see. BTW, I am not some newbee. I have been a Machead since the early nineties and set up a half dozen networks, including the one I am using at home to which the iMac mysteriously is there but not. This has me stumped! I am considering going back to 10.7!
Select ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP. What values are shown for the following:
Configure IPv4
IPv4 Address
Subnet Mask
Router -
Problems emailing any other file format other than a .jpg
I am having problems emailing any other file format other than a .jpg in mac Mail in Leopard. Is anyone else having this problem?
I have tried PDF, .tif and .doc documents, and they are small files, less than 150 kb. I have checked to ownership on the images and it says that I can read and write to them. I have also checked with my ISP and my mailbox capacity is 10 MB and was recently emptied. I am able to log into my ISP's webmail portal and send these types of attachments through there successfully, which has made me convinced that it has to do with Leopard or Mac Mail because I did not have these problems in Tiger.
When I send a message like this, Mail says, "Sending" for a while, and then says "Cannot send message using server:(Name of my server) Sending the message content to the server failed. Select a different outgoing mail server."I've been sending .doc files with/without also .jpg as attachments without problems so it is possibly not a Leopard problem. I know this doesn't solve your problem though. Someone else may be able to solve the problem.
-
I can't text a contact but can voice phone them. I don't have the problem with any other contact and the contact is not blocked. I have an iphone5.0 OS 8.1.3. I used to be able to text them with no problem. The only difference I can think is that this problem may have started since I downloaded the OS I am using now
cyclelukeWasn't responding to you. Please show me links where this helped.
Apple isn't showing any system problems: https://www.apple.com/support/systemstatus/ -
my iPhone 4s won't go home, shut down, go to any other app bc its on twitter now frozen there and it won't reboot it wont let me force lock it and its frustrating. help!
Hi mltmj123,
Welcome to the Support Communities!
To address this issue, I would suggest you close all open apps, then restart and reset your iPhone. Here's how:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Cheers,
- Judy -
5230 - Won't recognise 16GB SDHC Memory Card, but ...
Hi, I have the Nokia 5230 smartphone.I used an old 256MB Micor SD card for a month with no problems.
However, I have just brought a new 16GB Micro SD SDHC memory card. Upon insertion it worked first time - I could download music etc. 12 hours later, I couldn't play the music I'd downloaded and when I opened the card in 'file manager' was told "memory card corrupted". However, when I connected the phone to my PC in 'mass storage' mode I was able to access all of the music. i.e. the card was still working fine as far as my PC was concerned, but the phone would not recognise it. (In PC Suite mode, the card was not recognised)
I reformatted in FAT32 mode. Again it started fine, but about 12 hours later my phone stopped playing in the middle of the song and again file manager stated "memory card corrupted".
Any thoughts?
Is it the phone not working with a 16GB SDHC card?
Or is the card? - it was brought from Hong Kong of ebay....grateful for a quick response, as I need to know whether to send it back!
Thanks,
PrimoOr is the card? - it was brought from Hong Kong of ebay....grateful for a quick response, as I need to know whether to send it back!
Contact Pay Pal first then send it back and never ever buy memory from HK.
You could connect in mass storage mode and run scan disc .
jje -
Moutain lion won't recognize my bose companion 2 speakers, any solutions?
Just upgraded to a new mac mini 17 running moutain lion. Unfortunately the system won't recognize my Bose companion 2 speakers. I really would hate to have to get new speakers. These sound great, Is there any solutions? If not what computer speakers are compatible with mountain lion? Thanks.
If it is the speakers can you recommend a good but not overly expensive speaker set that you know are compatible with mountain lion. I have been reading a lot of online blogs on the subject and it seems I'm not the only one having an audio compatability issue with mountain lion. Though it could be the speaker brand too. Apparently Bose is not too compatible with mountain lion, at least it seems to be the brand that is having issues according to online bloggers.
Thanks much appreciated. -
Won't recognize hardware and syncing problems
I just plugged in my ipod and it says unkown device on the bottom right hand of my screen. Before this, everytime I synced my ipod to put new music on there, it would always say "ipod sync complete", it used to say "ipod sync complete, ok to disconnect". After it was done updating the ipod, the do not disconnect screen would go away and I could disconnect it. but now the "do not disconnect" sign on my ipod doesn't go away. How do I fix these problems?????
One more question, is there a way to get all of the files on my itunes into a completely different folder. I have a lot of music in my "my music" folder, and I have a specific amount of music from there onto my itunes. Everytime I have to restore, I have to pick and choose all of my music again, is there a way I can just drag and drop all of that music and video into a new folder or what?Okay, the first two problems fixed itself somehow. I tried it the next day and it worked. I still want to know if I can transfer all of the music in itunes into a different folder though. Doesn't anyone know anything about this?
-
Please see above which is the message starting with a question. Hope it is all there.....
Powering I pod touch off and on again? Or un plugging router? Since the other devices work the latter is confusing.
I am afraid of the total test as all my personalizing stuff for a year will disappear right??
THANK you for responding. -
For example, I had several tabs open in Firefox 4 just now. For no apparent reason, when I opened a fifth tab, I couldn't click on the location bar or type anything into it even with repeated attempts. I either have to start Firefox again or try going back to a tab that is already open with a page loaded and type into the location bar there. That worked for me to be able to get to this website. This is very frustrating and seriously hampering my ability to use Firefox--which I have previously always been impressed with. I have a 2 year old Dell Optiplex 755 running Windows Vista.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
This problem seemed to fix itself for a period of time but now it`s returned. It`s quite frustrating because to type some of the characters that I need, I have to use the Windows character map or go to other apps, type the character that I need, copy it, return to Firefox and paste.
See:
* http://windows.microsoft.com/en-US/windows-vista/The-Language-bar-overview - The Language bar (overview)
It is possible that you are switching the keyboard layout by accident.
* Make sure that you have the Language bar visible on the Windows Taskbar.
* You can do that via the right-click context menu of the Taskbar: Toolbars > Language Bar.
* Check the keyboard language (keyboard layout) setting for the application that has focus via the icon on the Language bar.
* You need to do that while Firefox has focus because Windows remembers the keyboard layout setting per application.
* The default keys to rotate the layout is a combination (Ctrl+Shift or Alt+Shift) that can easily be used in Firefox to activate a menu item.
* To avoid an unintentional switch assign a specific key sequence (Alt/Ctrl+Shift+number) to select keyboard layouts and remove the key combination to rotate layouts (Alt+Shift or Ctr+Shift)
* Vista: Control Panel > Regional and Language Options > Keyboards and Languages > Change keyboards > Advanced key settings > Change key sequence -
Help please. I have a new Epson XP 520 printer and do not know how to set the CS3 print to get good results as my printed photos are now far too dark. Never had any problems with previous printers and despite changing settings have been unable to resolve.
System info? Exact print settings? Color management?
Mylenium -
Very strange how this does this. Producing pop up windowns like a right click and also zooing in and out by itself. If tried to report this and the steps taken were: 1 - reinstall software and 2. (which i havent done yet) , wipe it clean and start over...
This is a new late 2013 macbook pro 2600 computer laptop...
Anyone else have this problem?Like this:
http://support.apple.com/kb/PH14222
Barry -
I try to play this facebook/Zynga game every day, and I have no problem at first. After a little while though, it ends up crashing every time. I do not under stand why and would like to see if someone could help me, I am getting a bit angry. No other Zynga/facebook game has this problem, and they all use Adobe Flash.
Creative Cloud Help / Creative Cloud applications ask for serial number
http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html -
I am unable to access the iTunes store even after installing the latest version of iTunes. My OS is Windows 7 and none of the solutions I have found online have resolved my problem. Anyone else having this same problem?
Without details about the problem it's very difficult to offer useful suggestions, but try this:
1) Click on your Start menu.
2) Go to Accessories
3) Right-click on the Command Prompt application and choose "Run as Administrator".
4) Once it opens, type in the following command...
netsh winsock reset
5) hit Enter and it should say something like Winsock reset successful.
6) Reboot your computer and try the iTunes Store again.
Regards.
Maybe you are looking for
-
How Do I Display A Sub-Catalog/Category Header?
I can not for the life of me figure out how to display a sub-catlog's header on the page using the various templates? I have the code for the main catalog working fine but I can not get the sub-Catalog headers to appear on page in the same way. I hav
-
Need Help in displaying data labels at the top of the bars in CFCHART
Hi, I have a cfchart with two line series and one bar. I want to display the data values at the top of the bar and the line series. Below is the XML I am using: <cfsavecontent variable="chartStyle"> <?xml version="1.0" encoding="UTF-8"?> <frameChart
-
Strings adding zero's to arrays
I have a program that arranges 4 arrays which consist of columns of 10 data points from each iteration of the program. The final program puts these sets of 10 pts into one long column. I converted the array into a spreadsheet string. I used the match
-
VPN client get connect but Request Timed out when ping
Hi, I'm using the cisco 837 router as my VPN server. I get connected using Cisco VPN Client Version 5. But when I ping the router ip, i get request timed out. Here is my configuration : Building configuration... Current configuration : 3704 bytes v
-
Entering numbers on the alpha/nume​ric keypad
How do i enter numbers on the alpha/numeric keypad of my HP 6500? trying to put in network password. Thanks