Won't recognize CD Rom on MSN K8N SLI Neo

Alright I just built my computer, booted it up, and it does not detect my IDE CD Roms. I've tried all the jumper settings, and on both slave and master on the ribbon with all jumper settings, I tried different IDE cables, and different drives. Yet the drive just has a solid green light and does not open or anything....
Any ideas?

Please post the specs of your PC including PSU current ratings. Is there any chance that the cable is pluged in upside down? On a floppy drive a solid green light indicates that the cable is pluged in upside down.

Similar Messages

Remote Desktop Connection and iTunes - Won't recognize cd-rom drive

When I connect to my remote server using Remote Desktop Connection in Windows 7 and start iTunes it see the CD-Rom drive, but when I double click on a track in Windows Explorer iTunes opens but it does nothing! Any ideas? Thanks in advance for any and all suggestions.

Okay, apologies for the duplicate thread - I tried searching and didn't see anyone with a similar issue, but now I see a thread down the page with the same issue of the disc not ejecting. I'll try WMP and see if that works any better...

K8N SLI NEO 4 , NO SOUND PROBLEM

Hi , i recently change my casing to Thermaltake Armor JR, and i don`t have sound, i check the digital output and the device, it says it is working properly. Is there some problem with my sound card ?

https://forum-en.msi.com/index.php?topic=58111.0

DVD Burner won't recognize discs

I recently installed an lg gsa-4166b dual layer dvd burner to my emac and for some reason it won't recognize cds or dvds. Whenever I try to burn anything and put in a blank disc I get the message "no disk inserted". I'm running Mac OSX 10.4.11 and even installed the PatchBurn utility, but still no luck. Can someone help me?

Oh really? Now that is interesting, because in fact I also have a Western Digital MyBook Pro external HD. Actually 2. They worked fine until the last month or so, and one of them had a bad disc so I had to have it replaced on warranty. Now the other one is acting strange -- won't mount. WD had me upgrade the firmware and reinstall the latest drivers. But it's still not acting right.
And you are also correct about the disc playing. Normal DVD's, CD's and CD-ROMs play fine. It's just blank CD-R's etc that come up as "unreadable."
I bought these two WD MyBook Pro 1 TB drives on 10/20/2007 however, and I don't recall that I had a disc burning problem that long ago. Maybe it's been that long since I burned a disc? I'm not sure...
Incidentally I've had another problem for a really long time, which is a very long Mac OS startup. I am not sure when it started but it might have been about the time I bought these drives and installed the software. See threads:
http://discussions.apple.com/thread.jspa?threadID=1765645&tstart=0
and
http://discussions.apple.com/thread.jspa?threadID=1880557&tstart=0
Yesterday two things happened. One, Apple sent through another automatic update requiring a reboot, but I didn't catch what it was. Two, WD had me upgrade the drive firmware and software drivers. Suddenly my bootup problem has gone away. So the question is, was it Apple's update or WD's firmware upgrade?
And lo and behold, I just entered one of the same blank Fujifilm CD-R discs and it mounts without a problem. I can now burn discs again. I have a feeling the WD firmware upgrade fixed a lot.
Yeesh! I think I shall be buying drives from someone else in the future.
Thanks for this very insightful tip.

Won't recognize inserted disks

The drive in my black MacBook won't recognize an inserted CD or DVD unless it's blank. If it's blank, it asks what I want to do, but if it's a data disc of any kind - for example, the Snow Leopard install DVD - the drive takes it but as far as the OS is concerned, there's no disc in the drive.
Once I go to restart the computer, however, it sees the disk and mounts it.
Any clues?

Hi PWolves04, the fix bobapcoed described probably won't help you because your computer still "sees" your CD drive--it just doesn't read the disks you insert. The fix makes your computer see your drive again when it has completely disappeared from "My Computer". Speaking from personal experience (I've had to replace three CD/DVD-Rom drives over the years) one of the first signs that they're dying is the inability to recognize and read disks.
If you want to try the "Fix" before you move onto other troubleshooting avenues, here is a link to one thread that discusses it:
http://discussions.apple.com/thread.jspa?messageID=1457169?
I recommend that you search the Importing and Burning Category for entries by "toonz" for more information if you really think this will help.

Upgrade won't recognize the hard disk to begin the installation

Powerbook G4 w/ 9.2.2 & the original CD for OS X 10.1 - thought I'd get it on and upgrade from there since I know I'll need to buy more RAM - existing is 385 & I only have 10 G on the system. I downloaded several updates, ran the security update first. The 10.1.1 update won't recognize the hard disk to begin the installation.Thought I had a clue, but stuck in the jungle upgrading. Which one is which - is Jaguar 10.2??? Do I need to be doing each of these upgrades to get it running well until I add the RAM? I'm trying to stay calm since it updated my IE and I think I lost everything I had on it - too fast with the click and assumed they were separate entities....(unless there is a genius out there who can help on that front too)
many thanks... Kate

Hi Kate! And Welcome To Discussions!
You're lucky Kappy is helping you out with this. He is one of the more knowledgable posters here!
I'm just adding some extra info.
There are two PowerBook models that need a Firmware Update, before you can install a newer OS X.
Check if one of them is yours.
Mac OS X Versions 10.1, 10.2, 10.3, and 10.4, are complete system upgrades that must be purchased.
The point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), and 10.4.x to 10.4.6 (Pending), can be downloaded for free.
Tiger is available for purchase at The Apple Store (U.S.).
Jaguar and Panther, are no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
Jaguar Full Retail Version CDs, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version of the Tiger Install DVD, can be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Jaguar and Panther are only on CDs, not DVDs.
More info here Tip: Using OS X Install CDs/DVDs On Multiple Macs
Once Jaguar 10.2.x is installed, you can use the 10.2.8 combo update,
or if Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final edition of either OS.
If your Mac meets the System Requirements for Tiger, you could also consider installing that.
And then use the 10.4.6 Combo Update.
You'll find System Requirements in these links:
Panther
Tiger
Additionally,
"Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media. When you buy Mac OS X Tiger, you qualify to purchase Tiger CDs for only $9.95."
Download The order Form Here. Media Exchange Program
Shop Carefully, Examine All Documention, And Good Luck!
ali b

Old mac won't recognize OS 10 disks for installation to allow upgrade.

I have an old Power Macintosh G3 300 Desktop (M7105LL/A) currently running OS 9.1. I want to upgrade to OS 10.3 or 10.4 (I have both disk sets).
I tried starting up from either of the disk but the PM won't recognize the 10.4 or start up from the 10.3. I get error messages offering to erase the 10.4. The 10.3 starts up on my mac in OS 9.1 even with "C" held down.
I somehow did this once b4 but do not remember the trick I used.
Unfotunately as my printer and internet did not work went back to OS 9.1 but now I am willing to work on those isses but cannot even get to that point.
Many internet sites won't work with OS 9.1 so I do need to up grade.
Note that when I start these disks from my mac laptop running OS 10 they are recognized? I'm stumped and need help.

Hi, I am tring to bring an old indigo imac g3 500Mhz 20Gb HD into the present day for my mother-in-law and have just put in 1Gb ram in order to install either 10.3 or 10.4 (I have been told that 10.5 is a no go). I have two copies of 10.4 that came with an old ibook G4 and a Mac Mini G4 and also a copy of 10.3 that also came with the Mac Mini. None will install on the iMac G3 with the note "this operating system and softare bundle cannot be installed on this Mac" (incidentally, although I am not sure this is relevant, I am using the DVD drive on my MacBook Pro by firewire link as the G3 only has a CD-Rom drive). I believe that if I buy a retail copy it will work, but at £90 it's maybe not worth it having just spent £70 on the Ram, however as I no longer use any of the other copes of 10.3/10.4 mentioned on another Mac I feel agrieved that I cannot use one of these. Does anyone know a way that will let me install one of the copies that I already have? Any help much appreciated.

Had to reinstall Panther - now CD won't recognize OS9 disks

I have a B&W G3 with 2 hard drives in it. Had to replace the larger of the two, and of course it was the one with my startup system (or one of them.) I could boot from my 9.2 startup disk which was on the other hard drive. I made a copy, using the disk utility restore function, on to a backup drive so that I didn't lose everything on the crashed disk. Then I replaced the hard drive, partitioned it and reinstalled Panther all the way to the most recent update. I was able to capture just about 98% of all of my previous system setting, extensions, etc., yet now when I put in an older CD (that was comaptible with OS9) it says it is "unrecognizable" and wants to inititialize or eject. When I go to system profiler it says there is no OS9 drivers for the CD. It is the original CD ROM from Apple, a matshita CDR. How can I recapture the driver? Where would it be?

Daisy:
Since you already have everything in place on separate partitions, and it is so much of a hassle moving stuff around, I suggest you leave things alone until you need to something by way of re-installation.
In terms of backing up a firewire external HDD would be prefereable as you could then use SuperDuper or Carbon Copy Cloner to clone to the firewire external, which you can then use as an emergency startup drive. It makes backing up a lot easier. SuperDuper is very easy to use and efficient. CCC works well, too, but is slightly more complex.
Re: Had to reinstall Panther - now CD won't recognize OS9 disks
Posted: Aug 22, 2007 11:05 AM
So, Cornelius, what you are saying is that I am making it harder for things to function smoothly? The reason I have been doing the partitions is to save time when running something like Disk Utility. It goes a lot faster on a 20GB than it would on a 100GB, or am I wrong in assuming that?
Now I have the daunting task of removing everything that I have finally gotten in place to the backup drive, and reformatting my MAC! UGH! Is there an easy way to do this without re-installing the major programs I use? When I was getting the data off of the previous bad drive, I dragged and dropped them onto the backup disk (a Simpletech 160GB USB) and that was very time consuming. I think it was slow because I have the old USB 1.1 and the backup is a USB 2.0. I did not use the backup software that came with it, because I was in panic mode and accidentally erased the program when I formatted the backup drive. Now I have it, but haven't used it yet. Even so, I was able to drag and drop most of the files and it worked fine, but I had to reinstall the OSX, QuarkXpress, and Indesign. This has been going on for a couple weeks and I am still tweaking things to get it right.
When I used the "restore" function it put the drive on the backup but not in a folder. When I dragged and dropped it went across like folders. Do you have any advice for me to make this less painful?
+One more point - if I did use the install OS9 drivers the first time, and it didn't, what would it do if it was only one partition? Would I get them back or not?+
You can check to see if the OS 9 drivers are installed by going to Apple Menu > About this Mac > More info > Hardware > ATA. In the lower section of the main panel go down the list and look for OS 9 drivers installed. It will say yes, or no.
Good luck.
cornelius

Circle with slash/won't recognize DVD or external drives

I have this model:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,5
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.26 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP55.00AC.B03
SMC Version (system):          1.47f2
Serial Number (system):          7304001D66D
Hardware UUID:          134FD99D-DF06-5912-A8B9-255280C48DCC
It often fails to boot with the circle with slash. Tried safe boot (works), tried booting from optical drive with original system disc (won't recognize or eject-tried all of the eject techniques), and ran disk repair in target mode (found nothig wrong). Can't run hardware check for obvious reasons. It does not see external drives connected to FW or USB ports.I am starting to suspect a bad logic board. Any thoughts?

I can no longer startup from a CD/DVD
Be sure you're inserting the DVD that came with your Mac Pro. If you are trying to boot from other optical media be sure it is compatible with Intel Macs and specifically the Mac Pro. You are probably trying to boot off a discs that does not have a suitable OS on it.
or my external FW drive which has 10.4.8 also installed on it (pre-intel)
Same goes here. Your FireWire drive does not have a suitable OS installed in it. You need to install an Intel version of Mac OS X. Additionally you will probably need to repartition your drive using the GUID Partition Table. Until you do both of these Startup Disk will not let you select it.

ITunes won't recognize iPod Nano (1GB, 1st generation)

I have been having problems Sync'ing my iPod nano with iTunes, however, the more I read help articles and follow the steps, the worse the problem gets. (I'm on a PC using Windows XP)
I've gotten to the point where I updated my iPod software in Disk mode (up until then it was being recognized only in Disk mode), but when iTunes failed to recognize it when not in Disk mode I preceded to restore my iPod to factory settings, as instructed in the help articles.
Now, up until then, I still had music in my iPod, and I was being able to charge it and listen to my music even though I couldn't sync the iPod anymore. After restoring, I not only lost my music (which I was aware of), but it STILL did not fix my problem. So I started to get annoyed.
I then noticed that my iPod was being recognized by My Computer, just not by iTunes, so I began to perform the steps indicated in the following article:
http://docs.info.apple.com/article.html?artnum=93716
I restarted my iPod service - no luck
I removed iTunes - no luck
I emptied my Temp directory and restarted...
That's when iTunes stopped recognizing my iPod altogether, not even in Disk mode. Not only that, but it seems to have affected the iPod itself, since it won't turn off or exit Disk mode anymore. So now I'm scared of going though with any more steps on whichever "help" articles and making the problem even worse than it already is (if that's possible).
The only other information I can provide is that windows is still recognizing my iPod, no problem, and when I connect my iPod, iTunes actually launches... but DOESN'T recognize a thing. So I ran a diagnostics using iTunes and here's what I got (iPod diagnostics):
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
INTEL_ D945GCL_
iTunes 7.3.2.6
iPodService 7.3.2.6 is currently running.
iTunesHelper 7.3.2.6 is currently running.
Current user is an administrator.
The current local date and time is 2007-08-30 11:53:26.
Connected Storage Devices:
Unidade de disco, MAXTOR STM3160211AS, Bus Type ATA, Bus Address [0,0]
Unidade de disco, MAXTOR STM3160211AS, Bus Type ATA, Bus Address [0,0]
Unidade de disco, Apple iPod USB Device, Bus Type USB
Universal Serial Bus Controllers:
Standard Universal PCI to USB Host Controller. Device is working properly.
Standard Universal PCI to USB Host Controller. Device is working properly.
Standard Universal PCI to USB Host Controller. Device is working properly.
Standard Universal PCI to USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No IEEE 1394 Host Controller found.
Connected Device Information:
IPOD (H:\), iPod nano running firmware version 1.3.1
All green lights, and as you can see, according to iTunes, NO PROBLEM! Except that it won't recognize the iPod that the disgnistics says exists and reads... ?!?!?!
If anyone could shed some light on my situation, i would be VERY greatful!

My IPod Nano will charge when connected to my computer but it won't come up on My Computer or iTunes. So I can't update the songs. I've already tried reseting the iPod. Does anybody know what I can do to fix it.

I just downloaded the latest version of iTunes on my PC, Window 8 and now it won't recognize my iPhone 4. The device never shows in the menu bar

I just upgraded to 11.1.4.62 and now my iTunes won't recognize my iPhone 4. The device never shows in the menu bar

Hello there.
The following Knowledge Base article provides some great, in-depth steps for troubleshooting your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Adobe won't recognize that I uninstalled CS on old computer, won't let me activate on new computer

Adobe won't recognize that I uninstalled CS on my old computer, won't let me activate it on new computer.

Yes, uninstalling is not the same as deactivating. Call support to reset activations.
Mylenium

Please Help - My iTunes library won't recognize my iPod classic

My iTunes library won't recognize my iPod classic 80gb. I try doing the trouble shooting steps on apple, but they still did not work. Any help would be greatly appreciated. I'd love to add some newer music to my old iPod for listening in the car or when travelling. Thanks a lot.

Hello dmbnewfie,
Welcome to the Apple Support Communities!
I understand that your iPod classic is not being recognized in iTunes when you connect it to your computer. I know you have tried some troubleshooting on the Apple website as well, but without knowing which steps you have completed, I would suggest working through the attached iPod classic Troubleshooting Assistant.
Apple - Support - iPod - iPod classic Troubleshooting Assistant
Have a great day,
Joe

TS3988 I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud?

I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud? I plan on getting rid of my old email address which is my old Apple ID so how is that going to work?

Same question Wish someone had replied!
I changed my Apple ID to my new email and now cannot find any way to access icloud. Unfortunately I had allowed icloud to hijack my airbook files, so of course I am afraid I will lose them tomorrow when I exchange my iphone for a new one and cannot keep an icloud account i cannot access. What a poor sync system! Really atypical for apple!

Deskjet 3050 won't recognize wireless network anymore.

Product: HP Deskjet 3050
Operating system: Windows 7-64 bit
Printer quit printing wirelessly. Using the control panel on the printer, I restored defaults. Now it won't recognize any wireless networks. I have unplugged computer, but that didn't help. I don't want to unplug my router, because I will lost all my DVR items (we are on AT&T uverse). Any tips?

Run a Wireless Network Test from the Network menu of the front panel. What does it say?
If everything is OK (which I suspect), re-install the printer with the temporary use of a USB cable just as you did originally when you installed it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Won't recognize CD Rom on MSN K8N SLI Neo

Similar Messages

Maybe you are looking for