Won't render, won't export to mpeg2 1440 x 1080i 30

When I try to export to mpg2 140 x 1080i 30 an error message comes up and export cancels.
When I click the render box on the timeline, the CTI goes to the same brief clip and plays it, then stops.  No rendering takes place, and the clip remains selected. 
Also I don't find an export option for mpg4. 
Thank you.
Randall Morgan

Randall Morgan
What version of Premiere Elements and on what computer operating system is it running?
For now I will assume, Premiere Elements 11, 12/12.1, or 13/13.1 on Windows 7, 8, or 8.1 64 bit.
Do you have the latest version of QuickTime installed on your computer along with Premiere Elements? If not, please do so. That may be the answer to the MPEG2 issues and a lot more.
As for export of your Timeline content to file saved to computer hard drive with .mp4 file extension, please look for your opportunities
Publish+Share
Computer
AVCHD
Presets.......one of the MP4 presets which can be customized under the preset's Advanced Button/Video Tab, Audio Tab, and, if applicable, Multiplexer Tab.
and
Publish+Share
Mobile Phones and Players
Apple iPod, iPad, iPhone
and one of the .mp4 presets there.
Please review and consider, and supply more details so that we can fine tune the information.
Thank you.
ATR

Similar Messages

  • FCP won't render sequence or export EDL

    I have a on-line quality sequence that I am trying to render. Sometimes the render progress bar comes up and sometimes it doesn't. Either way the rendering stops after about 5%. Sometimes I get a "General Error" message.
    When I treid to export the EDL I was able to go through the motions in the EDL export settings box but when I selected OK the box disappeared and nothing happened. I tried "remove attributes" and took off all of my filters etc but it still didn't work. I tried a different EDL format (SONY 9100) other than CMX 3600 just in case I had too many edits for FCP to handle. Still no go.
    Any suggestions. Deadline is Today at 5:00pm Atlantic time. Thanks
    G5   Mac OS X (10.4.3)   dual 2.5 GHz, Power PC G5, 3 GB SDRAM

    hope this doesn't just further complicate the issue, but since I'm having the exact same problem I'll tell you what I've tried so far; maybe you'll have better luck. In my case I get to about 10% rendered before the progress bar just disappears, and then not even the 10% was actually rendered. never seen anything like it before.
    for anyone trying to help out, here's what I've already done: all the colored options in the render menu are checked, I've tried re-importing the file, opening a new project, double-checking the render file permissions and even trashing the preferences.
    the clip plays fine in the viewer, and also looks fine in the canvas when using the scrubber to move through the frames.
    would very much appreciate any ideas I can try!

  • Timeline won't render in Premiere Elements 12 (and music video editing advice)

    I have a section of video I'm editing that won't render. I've read some similar threads but still have a question about how I can edit the clips to 'force' a render.
    I'm running PE 12 on a Core i3 laptop running Windows 8, so not a huge amount of processing power. I don't have an orange line above the timeline over these clips and I understand PE has decided that it's already giving me the best possible preview quality and doesn't need to render this section. However, it's four quick edits in time to some music and when I preview it back my computer clearly can't process the video and audio fast enough because I get very jerky video so I can't verify that the cuts are perfectly aligned to the drum beats.
    I've been exporting the whole four minutes just to review about five seconds of video in the middle to make sure it's synched, and this is getting really frustrating as I'm having to make frame by frame adjustments to improve the sync.
    Is there anything I can do to each clip, like adjust an image setting, to force PE to give me an orange line and want to render this section?
    Just as an aside to anyone who edits music video type clips - if you're making, say, four quick cuts to four drum beats in a bar, do you find the audio/visual sync works best if the cut is on the frame the drum beat attack starts on, or does it seem more natural if it's one or two frames after the initial attack so it's 'mid drum beat'? I'm tending to find just after the initial attack looks/sounds better for me - but maybe that's something to do with the delay in my PC processing the frame!
    Thanks for any advice,
    Chris.

    Chris
    Please excuse the questions, but I did not want to take anything for granted...are you sure that you are looking above the Timeline content for the render indicator line? Assuming that you are OK with that.....
    Are the gray tabs of the Work Area Bar placed so that they span the entire content of the Timeline, including this five second content which you say cannot be rendered. Remember rendering does not fix problems, rather it is a preview that helps you to realize that a problem exists sooner than later. Consequently, please confirm if an orange line persists over that five second content even if you press the Render key above the Timeline.
    Have you expanded the Timeline content to the maximum with the Zoom Out Zoom In Slider above the Timeline get the best look at the content on the Timeline in contrast to get the best possible preview in the Edit area monitor?
    Have you gone to Edit Menu/Project Settings/General and set the Audio Display Format to Milliseconds if you are involved in audio edits?
    Have you been nudging audio in sync with video using shortcuts, such as...
    As you hold down the Alt key of the computer main keyboard, tap the left or right arrow key once (one tap = 1 frame nudge)
    As you hold down the Shift+Alt keys of the computer main keyboard, tap the left or right arrow key once (one tap = 5 frames nudge)
    I would suggest that exploration and experimentation are the best tools with which to work to achieve a specific effect for your specific
    situation.
    Please review and then let us know if any of the above targets your questions about your workflow.
    Thank you.
    ATR

  • FCP suddenly won't render anything

    I had a project a client wanted a scene cut out so I deleted the transitions, selected my in and out points and shift + delete to remove the footage & close the gap. I put in a dip to color transition (green) but FCP won't render it, I just see a very brief window pop up and nothing. I removed the transition and it won't render the ends of the 2 clips (both are JPEG RGB graphics)Cap locks are off, all colors selected in sub menus, no gap, plenty of footage, tons of hard drive space. The system has been running like a dream up to now. I even deleted an existing transition, put it back and it won't render it. I've worn the book ragged reading it over and over but I must be missing something. Have also rebooted & checked my preferences though nothing seems out of place.

    Sometime a sequence muff up with no reasons, what i do , i save the job save project as.. with a complete new name close FCP and reopen it with the new file most of the time it is working ,if not, export the complete sequence in self contained QuickTime movie
    AlRobi

  • Lightroom won't render any images.

    I am using Lightroom 4.1.
    I have recently upgraded my graphics card and now Lightroom won't render any images!
    There does not appear to be a problem with either Bridge or Photoshop CS5.
    Can anyone offer any advice?
    Thanks,
    Paul

    More information, please.
    When you say "render", exactly what do you mean? That images previews don't appear in say, the Develop module? Or that Lr isn't exporting images?
    If it's the latter, what happens when you try to export?

  • Clip won't render

    I have a timeline of a few clips and one of the clips in the middle won't render (the green line never appears above it).
    There is no red line above, just gray.  no matter how many times I hit enter and go through the entire workarea, it stays gray.
    The entire thing plays fine in preview but the green line never appears.  Then when I save it as a quicktime, the audio is messed up in that part of teh clip.
    any suggestions?  thanks.

    Glad that other formats work for you. I do not know the causes of the problems with QT, but many experience them. One noted poster, Jeff Bellune from the PrPro and the Encore forum, summed it up this way, "Apple just does not understand anything PC." [OK, maybe a slight paraphrase there, but you get the idea.]
    I wish that I had a real "fix," but similar can happen when working with MPEG-2 Assets, and then going to a DVD-Video (another MPEG-2 Transcode). I have fought that one, but clients insist on working with MPEG-2 muxed files from previous DVD's, and refuse to go back and get footage, prior to the creation of that DVD. Sometimes, one gets lucky, but often OOS sinks in, and there is little that one can do about it. On one Project, I had sync perfect on the Timeline, but when we'd go to to the delivery DVD, it would be out. I moved Clips around, for the OOS scenes, by my guess on OOS. Without being able to see it on the Timeline, it was seat of the pants. I'd move a second, and observe no correction. Two seconds and still no change. Three seconds, and I'd get two seconds in the other direction! Finally, I had to just say, until you get the footage before Transcoding to MPEG-2 and the DVD, that is the best that you'll get.
    Sorry for the bad news, and I wish that I had a "cure" for the QT Export. It plagues folk on PrPro, and also PrE. When things go well, all is OK. When sync goes out, there seems no way to get it right.
    Good luck,
    Hunt

  • Media Encoder CC  won't render Magic Bullet Denoiser II

    Hello there,
    i've got the following Problem: I am having Premiere CC and used the Red Giant Plug-In Denoiser II on my last project, when i import this project to the Media Encoder and select Quicktime for output, the Media Encoder won't render the clip with this Plug-In. i always get the original files out, without the denoiser. Original footage from in premiere is 2,5k CinemaDNG RAW from the Black Magic Cinema Camera.
    thx

    I feel like there was a recent update to the RG plugins (inside of the last 30 or so days.) Are they up to date?

  • Why won't Adobe Media Encoder export WMV?

    I am using Adobe CS6 Design Standard with Adobe Media Encoder, and I'm trying to export video files to WMV using the Encoder.  I'm am running Windows 8 and for some reason the option to export to WMV does not come up for me.  I only get four options of formats, while online it says I should have many more.  This is a full version of CS6 that I bought and paid for, and every program is up to date.

    Can I just buy the converter plugins or do I have to buy premiere pro or after effects?
    On Jan 9, 2014, at 1:07 PM, Todd_Kopriva <[email protected]> wrote
    Re: why won't Adobe Media Encoder export WMV?
    created by Todd_Kopriva in Adobe Media Encoder (AME) - View the full discussion
    The formats and codecs available for export through Adobe Media Encoder differ depending on what Adobe applications you have installed. The vast majority depend on the video applications, After Effects or Premiere Pro, being installed.
    http://blogs.adobe.com/kevinmonahan/2011/09/13/installed-codecs-in-ame /
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5995108#5995108
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5995108#5995108
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5995108#5995108. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Media Encoder (AME) at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • FCP 4 won't render

    Hi,
    I'm using fcp 4 and I when I try to render some scrolling text, it takes a long time and then comes up with general error 34. After that, it won't render anything. I have made sure that all the option colors are checked, and I have tried dumping the preferences.
    Thanks

    Hi David,
    There is lots of space. I had a student that added some titling to a project at the end of a video, and it wouldn't render. Then when I put the same titling on top of a clip, it rendered without a problem. I'm not sure why this was happening.
    Matt

  • Transitions won't render.

    I've been having trouble on and off with the ken burns effect and now for some reason when I insert a transition it won't render. Is there some command I can put in that will make it render or something else I can do? Also, if I try to empty the trash I get an error message saying that something is rendering but nothing is.

    HI Silas is Awesome - is your project stored on an external drive? If so it must be formatted for Macs - Mac OS Extended.

  • How can I get quicktime to record in HD because iMovie won't render it in HD

    IMovie won't render it in HD. Please help.

    Follow this thread : https://discussions.apple.com/thread/2634905?start=15&tstart=0
    and others in the right sidebar after the jump  —> More Like This 

  • Exporting to mpeg2 using Quicktime compression - render problems

    Using FCP Studio 5.1 to export to DVD, FCP keeps asking for file to be rendered even after we have rendered complete movie. There are no green or red bars, so why does FCP not accept this as a full render?
    We are exporting using mpeg2 Quicktime compression, not Compressor 2.
    Is there a work-round?
    Mac G5   Mac OS X (10.4.6)  

    Glad it worked...
    New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
    If we use the forums properly they will work well...
    Patrick

  • Themes won't render in iMovie06

    When I use some Themes in iMovie in order to make my Holiday-Videos a little bit more "interesting", I can choose all the themes and templates und drag them in the timeline. However they won't render, so that the red line won't change. Also saving my project won't work, because it is still rendering (but nothing happens). I have this problem since QT 7.5 but cannot downgrade...
    I waited a VERY long time for rendering-processes on my iMac 2.8 4GB but nothing happend at all.
    what can I do?

    puh.....
    Thank you for the reply.
    However, reinstalling the system without using a backup means very very much work... Is there no there Chance to use iMovie06 correctly?
    I can't really believe that

  • Pictures won't render

    I import my pictures into the bottom where it says drag clips to build your project. The red line comes on the bottom of the picture and stays there, nothing happens for over 15 minutes, when i try to add transitions it says it cant because the clip is rendering. I tried restarting the computer and it still won't render. How do I get my pictures to render in imovie?

    I import my pictures into the bottom where it says
    drag clips to build your project. The red line comes
    on the bottom of the picture and stays there, nothing
    happens for over 15 minutes, when i try to add
    transitions it says it cant because the clip is
    rendering. I tried restarting the computer and it
    still won't render. How do I get my pictures to
    render in imovie?
    did u ever figure it out? I am having the same problem on my MacBook--but never had it on my other Mac computer. Let me know what to do if you figure it out

  • Transitions won't render all the time

    When publishing my finished Captivate file, sometimes the transitions that I selected won't render. Or some will render and others won't. In order to fix it, I have to open my project, and go to each slide that needs a transition, change the transition to No Transition, then back to Fade, or whatever transition I was using. Then when I publish the file, I keep my fingers and toes crossed because it might or might not render them all. Is there a fix on the way to ensure that transitions are not ignored when rendering?

    Hi,
    Re-publish the project selecting "Force re-publish all the slides" checkbox in "Advanced Options:" of publish dialog.
    Let me know if it resolves your issue.
    Thanks,
    Vikranth.

Maybe you are looking for