Won't scan after updating to Mavericks on Mac
After updating my Mac to Mavericks, now my printer won't scan. It WILL print, however. But when I try to scan, I get this error message:
The scan cannot be performed because another program has control of the HP imaging device. Try the following steps: Restart the program. Close all programs that may be using the device. Reboot the computer.
I have done all the above. I have also turned off the printer and unplugged it for a few minutes. I have rebooted repeatedly. Thank you for any help you can offer!
This question was solved.
View Solution.
Hello martelloeugene,
Welcome to the HP Forums.
I see that you are having some scanning issues since you upgraded the operating system on the Mac.
Seeing the HP does have a full feature software and driver bundle for this particular operating system, I suggest that we start from scratch.
If you have the usb cable connected to the printer and the Mac, please remove it from both ends and leave it disconnected until further notice.
The first link I have for you gives instruction's on How to reset the printing system. Once we have the first step done, click on the next link for instructions on how to Repair disk permissions.
The last link I have for you is the HP Printer Drivers v3.0 for OS X. You will be given instructions on when to connect the usb cable.
If you are still having issues with scanning, I suggest then checking for apple updates as well as using the apple software for scanning.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP
Similar Messages
-
Problem with printing and scanning after updating to Mavericks for my Photosmart C7180
After updating my macbook pro (mid 2009) to Mavericks, I have found that I can only scan to a jpeg2000 and cannot scan as a tiff or jpeg or anyother format. I have followed instructions on troubleshooting and have not been able to make anything work ie scanning from preview etc. I have now uninstalled all the HP software and tried to load it again but software update will not recognise that I do not have the software for my printer. What do I do now?
Hello Cyd23, welcome to the forums!
I understand you're having issues with scanning since you upgraded to Mavericks. I have looked into this concern for you and found that there is no downloadable driver with the full feature software (scanning software) included for the Photosmart C7180 and Mavericks.
However, there are work around options for scanning that may help and work!
Please see this link for the other methods: OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
I hope that helps!
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Adobe OnLocation won't run after updating to Mavericks
I use Adobe OnLocation, the reason I bought a Mac, and after upgrading to Mavericks the system hangs everytime I start OnLocation. I have reinstalled the program numerous times. After a visit to the "Genius Bar" I decided to wipe the drive clean and reinstall the OS. Unfortunately Apple make no provision to revert to Mountain Lion. Does anyone else have this problem? How can I get Mountain Lion back on my machine?
DennisHello martelloeugene,
Welcome to the HP Forums.
I see that you are having some scanning issues since you upgraded the operating system on the Mac.
Seeing the HP does have a full feature software and driver bundle for this particular operating system, I suggest that we start from scratch.
If you have the usb cable connected to the printer and the Mac, please remove it from both ends and leave it disconnected until further notice.
The first link I have for you gives instruction's on How to reset the printing system. Once we have the first step done, click on the next link for instructions on how to Repair disk permissions.
The last link I have for you is the HP Printer Drivers v3.0 for OS X. You will be given instructions on when to connect the usb cable.
If you are still having issues with scanning, I suggest then checking for apple updates as well as using the apple software for scanning.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Most of the apps won't open after updating to maverick os x
update done today,but after the installation was complete and updated all my apps from app store i did restart and then most of the apps didn't open anymore (text edit,app store ,quickplayer,etc.)any idea why ?thnks.
Same Here!! Please Help
-
After updating to Mavericks, my mac seems slower than ever.
Here is a report for my mac that maybe someone can help me figure out why. Is something not compatible?
Hardware Information:
iMac (21.5-inch, Mid 2011)
iMac - model: iMac12,1
1 2.5 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information:
AMD Radeon HD 6750M - VRAM: 512 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 6:56:17
Disk Information:
ST3500418AS disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (133.53 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information:
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Serato Serato Scratch LIVE(c)2004
SCM Microsystems Inc. SCR3310 v2.0 USB Smart Card Reader
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.serato.usb.kext (2.3.0)
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.macpaw.CleanMyMac2.Agent.plist 3rd-Party support link
[System] com.marketcircle.daylite.accessd.plist 3rd-Party support link
[System] com.marketcircle.daylite.attachmentd.plist 3rd-Party support link
[System] com.marketcircle.daylite.backupd.plist 3rd-Party support link
[System] com.marketcircle.daylite.cardcald.plist 3rd-Party support link
[System] com.marketcircle.daylite.portsd.plist 3rd-Party support link
[System] com.marketcircle.daylite.staged.plist 3rd-Party support link
[System] com.marketcircle.daylite.touchd.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
Launch Agents:
[System] com.divx.dms.agent.plist 3rd-Party support link
[System] com.divx.update.agent.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist 3rd-Party support link
[not loaded] com.divx.agent.postinstall.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
[not loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
User Login Items:
iTunesHelper
AdobeResourceSynchronizer
Dropbox
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
LogMeIn: Version: 1.0.961 - SDK 10.7 3rd-Party support link
LogMeInSafari32: Version: 1.0.961 - SDK 10.7 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.2 - SDK 10.6 3rd-Party support link
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
Unity Web Player: Version: UnityPlayer version 4.3.4f1 - SDK 10.6 3rd-Party support link
Safari Extensions:
DivX Plus Web Player HTML5 <video>: Version: 2.1.2.172
Amazon Shopping Assistant: Version: 1.1
Ebay Shopping Assistant: Version: 1.1
Searchme: Version: 1.2
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
TuneUp Visualizer: Version: 2.4.0 - SDK 10.7 3rd-Party support link
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
Google Earth Web Plug-in: Version: 7.0 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.2 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.2 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.2 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.2 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.2 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.2 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.2 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.2 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.2 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.2 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.2 - SDK 10.5 3rd-Party support link
Epson Printer Utility 4: Version: 9.17 - SDK 10.5 3rd-Party support link
/Library/Printers/EPSON/InkjetPrinter2/Utility/UT4/Epson Printer Utility 4.app
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.2 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.2 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.2 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.2 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.2 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.2 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
BrFirmDataProvider: Version: 1.0.4 - SDK 10.4 3rd-Party support link
/Applications/Brother/Utilities/Firmware Update Tool/BrIfax/resources/BrFirmDataProvider.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
/Applications/iWork '09
PDF Toolkit: Version: 1.6 - SDK 10.0 3rd-Party support link
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 340.60 GB
Destinations:
Data [Network] (Last used)
Total size: 2
Total number of backups: 91
Oldest backup: 2012-12-11 04:35:50 +0000
Last backup: 2014-03-03 17:10:05 +0000
Size of backup disk: Excellent
Backup size 2 > (Disk size 464.96 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
14% iTunes
4% WindowServer
1% Dock
1% Mail
0% coreaudiod
Top Processes by Memory:
274 MB Mail
187 MB iTunes
147 MB mds_stores
74 MB softwareupdated
45 MB Safari
Virtual Memory Information:
31 MB Free RAM
906 MB Active RAM
897 MB Inactive RAM
893 MB Wired RAM
7.59 GB Page-ins
1.55 GB Page-outsTry removing CleanMyMac. The OS cleans up after itself.
Myth of the Dirty Mac
CleanMyMac - Uninstall
CleanMyMac2 Un-install
Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
Imac keeps crashing after update to Mavericks. What can I do?
After updating to Mavericks my mac crashes a lot. Also my thunderbolt LaCie 2big is corrupted. I cannot write to it.
Also my macbook has strange problems after update: itunes does not start anymore.
Mail is acts weird. Unread counts not up to date, postboxes not right a.s.o.Hi BBruins11,
If you are having issues with an external HDMI display after a recent upgrade to Mavericks, you may find the troubleshooting steps outlined in the following article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
- Brenden -
iTunes won't open after update - help, please; MacBook Pro, Mac OSX 10.6.8, iTunes version 11.1.5.
i had a problem similar to yours and better yet, i have the fix for it. i downloaded maverick 4 months ago and was without itunes ever since. all itunes icon did was bounce. itunes would never open and whats more, is when i would try to update it, i would get a "thank you for downloading itunes!" page , but the download would never work. so i scoured the net for solves. nothing that worked. <4 months later> then last night i took a new approach. i decided even though maverick would not allow me to uninstall itunes, i would find a way to uninstall itunes. then i would reinstall back to 11.1.5 i was successful and heres what i did.
step one-
Back up your iTunes Library.itl file, found under ~/Music/iTunes
(even tho i didnt, i only had 3 artists in there at the time. and they didnt get erased but i advise you back up just in case.)
step two-
download itunes 10.7 from apple. i used this link Download it from Apple here
(i pulled the link from Aarons website (awesometast.com). you download 10.7 however you want but i used the link above and have had no issues).
although im not sure you need to do this step ( you may be able to download 11.1.5 itunes without 10.7, i did because i was following intructions from http://awesometoast.com/downgrading-to-itunes-10-7-from-itunes-11-on-osx/
step 3-
open Terminal
step 4-
enter in these 3 commands hitting return after each line. 1st line nothing seems to happen, 2nd line nothing seems to happen and 3rd line gives you a warning and requires password to continue. when i did it, my password didnt appear as i entered it and i hit return without looking, so i entered it in again, although im not sure i had to the 2nd time.
killall iTunes
killall "iTunes Helper"
sudo rm -rf /Applications/iTunes.app/
step 5-
drag off and dump the itunes icon (which now has the ? shadow in it) off your dock.
step 6-
install 10.7 itunes you downloaded earlier. (not sure if this part is neccesary. you may be able to just download 11.1.5 but i downloaded 10.7 because i was following Aarons steps.) itunes now works.
step 7-
go to apple and update to 11.1.5 itunes. install it. open it and you have itunes 11.1.5 in perfect working order. assuming you have a decent internet speed for the downloads, the whole process takes very little time.
with those steps above, you can solve itunes just bouncing and not launching issues and also the "thank you for downloading" and nothing downloads issue. enjoy. also i would like to give a shout out to http://awesometoast.com and thank Aaron for the knowledge that enabled me to get itunes back into my life. -
After updating to mavericks I have to constantly enter my apple ID for mail, iBooks, iTunes and many other applications that used to be part of my keychain. How can I get my apple ID log-in to work again?
Several times I've re-entered my passwords under Preferences/Internet Accounts/iCloud and it won't save since I've installed Mavericks. Also, the iCloud icon in the left column in Preferences/Internet Accounts/iCloud is greyed out but allows me to click on it to set-up. When I click on iCloud the password is filled out but the "Enable this account" check-box is not checked. I check it, and all seems correct. The icon is no longer grey, the password is correct, the "activate this account" check-box is checked. Then, when I launch mail, notes etc. I'm still prompted to re-enter my apple ID. The log-in loop continues. For years my keychain has worked perfectly. What has changed in Mavericks?
-
After updating to Mavericks, I can't open iTunes. I keep getting a pop up telling me iTunes needs to run in 64-bit mode. After following directions several times to go to Finder, iTunes, Get info and "unclick 32-bit mode" it still won't work and i keep getting the smae pop up window. I've rebooted several times also.
What version of iTunes do you have? The current version of iTunes for Mavericks is 11.1.5 and the default mode is 64 bit. If "Open in 32 bit mode" is checked and you cannot uncheck it are you logged on using an account with administrative priveleges?
-
After update to mavericks my epson 420sw scanner is not responding error w-61
after update to mavericks. my epson all in one sx 420 sw the scanner is not responding error message w-61
I'm having the same issue. The scanning software doesn't launch, the scanner appears in system preferences after a few unplugs and plugins, and software update doesn't give me the recommended ICA update.
Also the Epson scan utilities aren't updated either and will be "released soon" according to here:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 139863&prodoid=63084673&infoType=Downloads&detected=yes&platform=OSF_M_X9
They recommend to use image capture (which is a joke) in the mean time or you could buy vuescan but thats not much better for some things. -
Ipod classic won't mount after updating to itunes 11.0.2
ipod classic won't mount after updating to itunes 11.0.2.
I updated to itunes 11.0.2 today, after delaying it for a looong time (I have it @ work and don't like the new layout).
Since then, none of my ipods will mount/show up/update. I've tried all USB ports, 3 ipods, 3 cords. Wondering if you know of any issues. I've restarted the mac about 15-20 times today since as soon as I hook up an ipod, itunes immediately spins the beach ball and won't let me click out of it.
I've restarted the ipods 10+ times each.
All of the ipods DO show up on my desktop though. Just not in itunes anywhere with 11.0.2.
One more thing: It's not the cables or the ipods: they both mount fine when connected to my laptop (running old *** 10.4.11 and itunes 9.)
Machine is a Mac Pro running 10.6.8.Finding this Post took some time but I thought it was me talking when I read it. I was having the exact same issue. I have a G3 I've been upgrading like mad, including a Sonnet G4-500 CPU a Maxtor 60gb & 80gb HDs 1gb of RAM a new LaCie Firewire800 PCI card Graphics card etc. the latest was installing Panther 10.3.9 on the new 80gb HD and also swapping out the old CD-ROM and replacing with the (Apple standard) Pioneer DVD-RW DVR-110D combo drive in it's place. got everything up and booted and poof! no burning. Toast worked read/write no problem. iTunes could read and import no problem, but wouldn't burn a CD.
Downloaded "PatchBurn 3.1.3" installed, re-booted and all is OK in burner land again :>)
I wanted to just post my additional thanks to the lead to Patchburner, and I'm going to donate to the cause. It's worth a $20 donation just for my joy of not throwing this computer out the window!! -
I can not open Airport utility on my iMac after updating to maverick 10.90.4
I can not open Airport utility on my iMac after updating to maverick 10.9.4 . Error Message:[You can’t use this version of the application “AirPort Utility.app” with this version of OS X. You have "Airport Utility.app"5.4.2] It also will not allow me to install "airport Utility 6.3. Does anybody has a fix for this?
Re-run Software Update and see if there is a newer version of Airport Utility. I suspect your router or iMac may be too old to use Airport Utility 6.3 . As a work- around if Software Update does not work then try reading this article and see if the suggested solution help you.
http://coreyjmahler.com/2013/10/24/airport-utility-5-6-1-on-os-x-10-9-mavericks/ -
How can I restore iPhoto 9.4.3 to Mt Lion after updating to Mavericks. I cannot open iPhoto in Mt Lion.
-
After updating to Mavericks, I have been unable to update iphoto, and when I attempt to, it says that These apps were already assigned to another Apple ID, and they will be available in that Apple ID's Purchases list. But no other appleID has ever been used on my computer, how could this be resolved?
Contact App Store support. There's a link on the right hand side of the App Store Window. They're the only ones who can sort out account issues.
-
Mac mini 2010 very slow after update to Mavericks
My mac mini 2010 (2.4 Ghz, 8GB ram) is running really very slow after updating to Mavericks.
Clearly OneDrive is a pain... but had it running on ML as well, and though it is a memory and CPU hog, it never really slowed down the system.
This is what Etresoft says:
EtreCheck version: 1.9.15 (52)
Report generated 21 Aug 2014 19:39:34 GMT+2
Hardware Information: ?
Mac mini (Mid 2010) (Verified)
Mac mini - model: Macmini4,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information: ?
NVIDIA GeForce 320M - VRAM: 256 MB
32LG3000 1360 x 768 @ 59 Hz
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 1 day 0:0:8
Disk Information: ?
TOSHIBA MK3255GSXF disk0 : (320,07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 319,21 GB (104,99 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Western Digital Ext HDD 1021 1,5 TB
S.M.A.R.T. Status: Verified
BigOne (disk1s1) /Volumes/BigOne: 1,5 TB (16,45 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Logitech USB Receiver
Logitech USB Receiver
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.Cycling74.driver.Soundflower (1.6.2 - SDK 10.6) Support
[not loaded] com.iospirit.driver.RBTSRPlugin (1.18 - SDK 10.6) Support
[loaded] com.iospirit.driver.rbiokithelper (1.18.1 - SDK 10.6) Support
Problem System Launch Daemons: ?
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Launch Daemons: ?
[loaded] com.iospirit.candelair.daemon.plist Support
[loaded] com.iospirit.candelair.sync.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.google.keystone.agent.plist Support
[running] com.plexapp.helper.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ?
iTunesHelper
Preview
ElementsAutoAnalyzer
Google Chrome
SEC Helper
Internet Plug-ins: ?
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Candelair Support
Perian Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 199.51 GB
Destinations:
BigOne [Local] (Last used)
Total size: 1 TB
Total number of backups: 84
Oldest backup: 2013-07-17 22:07:43 +0000
Last backup: 2014-08-21 17:31:13 +0000
Size of backup disk: Excellent
Backup size 1 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
78% OneDrive
3% ScreensharingAgent
3% WindowServer
0% Google Chrome
0% fontd
Top Processes by Memory: ?
1.18 GB OneDrive
90 MB Google Chrome
82 MB Finder
57 MB mds_stores
51 MB Google Chrome Helper
Virtual Memory Information: ?
4.46 GB Free RAM
1.94 GB Active RAM
321 MB Inactive RAM
908 MB Wired RAM
3.02 GB Page-ins
506 MB Page-outsChances are you have applications that are out of date and need to be updated. Another possibility is Spotlight is indexing and you to wait until it has finished.
Maybe you are looking for
-
Cursor not positioning on batch field MIGO after version upgrade to 6.4/7.1
We recently upgrade SAPGui from v6.2 version to 6.4 and 7.1 and noticed the cursor not moving to the batch field in item level of the MIGO. While doing migo for for any movement type When we click on the item level of the material. the cursor should
-
Seeing so many complaints on the Adobe Muse bugs forum, wondering if there is fixes coming soon to all these, ESPECIALLY compatibility issues with Windows 8-8.1 64bit PC's. These are the PC's being sold nowadays, I cannot buy a new laptop with Window
-
ITunes Can't Find Some of My Songs & Videos
My old G4 was filling up with song files, so I moved my iTunes Music over to an External WD Firewire Drive and all was well. Yesterday I migrated over to an Intel iMac, connected the drive and fired up iTunes and music filled my room. Then I clicked
-
MacBook Pro static charge thing
So I have a 2007 Macbook Pro that I sometimes place on top of my 32 inch widescreen CRT television. I do this so I can watch movies from the laptop through the TV and for connecting to XBOX live through my Macbook's airport card. The situation is tha
-
music playback becoming slower after few minutes of listening. -1300 of 2000 MB free on SD card -25 of 48 MB free in internal phone memory have latest firmware, tried power on and off, and also master reset but still same issue. Just to note that it