Won't send MMS before and after doing froyo 2.2 update

Soooo, last night my phone decided to stop sending MMS messages. I could recieve just fine, but not send. Just got the standard "failed" message. I did notice that this mainly happened when I went out of 3G service, but still had full bars...the 1x box was replacing the 3G box.
I've never had any issues even in the middle of no where Wisconsin until yesterday. I live in a larger city, so reception is not a problem..I have 3-4 bars at any given time. So I decided to try a software update (froyo 2.2) which now I am totally regretting. I've also done *228 and a soft reset (taking battery out for 10 seconds). Trying to avoid factory reset. Phone is still not wanting to send MMS messages.
Thoughts, advice, etc?

AEisele wrote:
I cannot send videos, pictures go through fine but videos are pending for at least an hour before any go through, and others never send at all. I tried everything: factory reset, *228, soft reset, and checked for updates. Nothing worked so I called VZW and got a replacement phone, only it does the same thing. It's driving me crazy and I don't know what else to do. Help!
Hi AEisele! Sure am sorry about your messaging issue. I've got a few ideas why this is happening, though. Can you send me a personal message with your name, a callback number (not the number of the phone we need to work with if you can help it) and a good time for us to speak? Thanks!

Similar Messages

Hp 5510 won't print black before and after installing new cartridge. have done specified checks.

HP Photosmart 5510 won't print black before and after installing new cartridge. Have done specified checks.

sueali301 wrote:
Been through all steps. Cannot find levers.The printhead on the Photosmart 5510 is not removable. For the Photosmart 5510 the troubleshooting steps in the document here may help. Especially make sure the vents are cleared. If that does not resolve the issue then resetting the printer as described in the post here may help. If this does not resolve the issue then read the entire thread here and try requesting reset instructions. If your printer is under warranty I suggest you contact HP for warranty service. If you are in the US call 1-800-HPINVENt, elewhere see the contact information here.

Re: hp 5510 won't print black before and after installing new cartridge. have done specified checks

I've followed all of the instructions and still no luck...what's worse is that I can't seem able to PM you for help. Please get back in touch with me as I would like some sort of remedy.

Hello Redwing1991,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink.
I see you have tried ALL steps listed here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, with no success.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Everyone: This time repair your permissions before and after 10.4.8 update

Hello All,
Just a reminder for all those who are updating to OS 10.4.8.
While many people do ignore all the recommendations that we provide and still come through fine, please do consider observing the following to minimize your problems.
To insure the best chance of success, please consider downloading the Combo Updater for your computer instead of using Software update.
For PowerPC Mac's, this would be:
http://www.apple.com/support/downloads/macosx1048comboupdateppc.html
For Intel Macs, this would be:
http://www.apple.com/support/downloads/macosx1048comboupdateintel.html
The benefit of using the Combo Updater, is that it replaces all system files that have been changed since the last major release (in this case since 10.4.0).
So, if you have any system files that have become corrupted, the Combo Updater will very likely over-write those, and spare you the headaches that come from updating an operating system that has problems that just haven't come to the surface yet.
In many cases, you can have problems that have not come to the surface, and the "Delta" or Software update method will bring them out to bite you. The reason for this, is because the Delta / Software Update version only changes files that have changed since 10.4.7. And, it works more in a "patch" fashion. So, if there is a problem in one of the files being patched, then the update will cause you some major headaches.
Going with the larger "Combo" update over-writes almost all the System files with clean versions instead of just making patches. So, it is frequently much more successful.
Now, with that said, before you update, you should make sure your permissions are all set properly. If your permissions are wrong, then your update will likely have trouble.
So, go into "Disk Utility" in the Applications --> Utilities folder and repair your permissions.
Start by selecting your hard drive on the left window of Disk Utility. Then, go down and click on the "Repair Permissions" button. Once it's completed, then exit Disk Utility.
Now, it is also extremely important to make sure all running programs are closed before you install any system update. So, go ahead and restart your computer.
Restarting will make sure that all programs are closed, and that nothing weird is stuck in memory before you install.
If you have anti-virus programs running, then disable or deactivate them first (you don't want them interpreting this as unauthorized modification or it might prevent certain files from being updated).
Now, with your computer freshly restarted, install the Combo updater you downloaded.
When prompted, click on the "Restart" button when prompted.
Now, the computer will startup, but sit at the spinning wheel for several minutes. It will eventually restart again on it's own. And, finally, it will start-up all the way and you'll be back at your desktop.
Now, immediately go back to Disk Utility and repair permissions as you did in the previous step. You will likely see several permissions that have been repaired. In my case, I had dozens of CoreAudio, Widgets, and other permissions that needed repair. Once permissions have been repaired, go ahead and restart one last time. This makes sure that everything is set and then cleaned-up.
Once it reboots, begin using it and enjoy.
Now, this may sound like a lot. But, it really is simple. It just reads like a lot of stuff.
And, of course, you are free to ignore this and just install it however you like. Many people have their own ideas here. And, many people say you don't have to do anything to prepare. But, for those that have had huge problems in the past, these extra steps will usually save you the major headaches that tons of people inevitably have with every new update.
Anyway, I hope this helps to save at least a few of you any problems. If you don't agree with the ideas above, just ignore it and do as you like.
But, if you want a little extra piece-of-mind and a better chance at success, then please consider exercising this extra caution.
And, for the record, I have updated my machines to 10.4.8 (within minutes of the update being available) and it is working perfectly smooth on my systems.
I hope you find this helpful.

mhunter, thanks and good that you take the time and effort again to remind everyone that it does take an effort to do a major OS update, to ensure maximum stability.
So far my 10.4.8 Update is a-okay, and I have had many trouble-free updates since installing 10.4
I too practice rigourously and "religiously" before and after an OS or Security Update, but I normally use Software Update, equally successful:
1. Before Startup, UNPLUG all external devices, left only keyboard, mouse and internet connection, unless they are all wireless.
2. Startup, disable NAV if any, Repair Disk Permission. Restart again, Repair Permission again.
3. Do Software Update
4. Restart, Repair Permission
5. Shutdown, plug everything back
6. Startup Mac, use Mac
So far these steps have been keeping all my macs both at home and at work very very stable and healthy.
Maybe, just maybe if everyone here, all mac users were to follow these steps, yes they can be a hassle, yes they can take up some time, but then there will be less less complains and "blasts" at Apple, just because perhaps themselves have been too careless or negligance in performing updates.
Cheers

How to covert before and after image details from logdump to SQL

Hi,
Through logdump,i am able to retrieve below before and after image details for an update statement.
Instead of below ascii format output, i need to know the complete sql statement before update and after update.
Is there any command to covert below output to readable SQL sentence?
2012/09/26 02:30:16.999.659 FieldComp Len 300 RBA 2528
Name: TEST.TESTTABLE
Before Image: Partition 4 GU m
5e50 86f5 af70 9660 b6fa 785c e34f 8881 0497 9507 | ^P...p.`..x\.O......
799f 2ee2 6399 d539 ea92 90de 828b 83d9 adc9 c8c4 | y...c..9............
ca87 9632 7136 a5fc 826f 8cc7 6ddd 7f8a e02e 816a | ...2q6...o..m......j
6ac4 739a 8011 5068 068a 4553 4937 93e7 cc5a d3d3 | j.s...Ph..ESI7...Z..
6a2b 2540 3be9 1df7 6d0c 0f17 d795 efd4 e0c5 dae9 | j+%@;...m...........
a488 a757 7c07 78a4 5f2a 1330 d2bb 5a05 7075 6b95 | ...W|.x._*.0..Z.puk.
529c f681 97d8 df6f 58d5 37dc e36d 8bc0 19d5 c7f0 | R......oX.7..m......
Bad compressed block, found length of 34549 (x86f5), RBA 2528
Logdump 2335 >n
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 300 (x012c) IO Time : 2012/09/26 02:30:16.999.659
IOType : 15 (x0f) OrigNode : 255 (xff)
TransInd : . (x01) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 24567 AuditPos : 4268948
Continued : N (x00) RecCount : 1 (x01)
2012/09/26 02:30:16.999.659 FieldComp Len 300 RBA 2947
Name: TEST.TESTTABLE
After Image: Partition 4 GU m
5e50 86f5 af70 9660 b6fa 785c e34f 8881 0497 9507 | ^P...p.`..x\.O......
799f 2ee2 6399 d539 ea92 90de 828b 83d9 adc9 c8c4 | y...c..9............
ca87 9632 7136 a5fc 826f 8cc7 6ddd 7f8a e02e 816a | ...2q6...o..m......j
6ac4 739a 8011 5068 068a 4553 4937 93e7 cc5a d3d3 | j.s...Ph..ESI7...Z..
6a2b 2540 3be9 1df7 6d0c 0f17 d795 efd4 e0c5 dae9 | j+%@;...m...........
a488 a757 7c07 78a4 5f2a 1330 d2bd 5a05 7075 6b95 | ...W|.x._*.0..Z.puk.
529c f681 97d8 df6f 58d5 37dc e36d e8b8 19d5 1af0 | R......oX.7..m......
Bad compressed block, found length of 34549 (x86f5), RBA 2947

From the reference guide:
*FORMATSQL*
Valid for Extract
Use the FORMATSQLparameter to output data in external SQL format, instead of the default
Oracle GoldenGate canonical format. FORMATSQLgenerates SQLstatements (INSERT, UPDATE,
DELETE) that can be applied to both SQLand Enscribe tables by utilities other than Oracle
GoldenGate Replicat.
NOTE Do not use FORMATSQL if the data will be processed by the Replicat process.
Replicat expects the default canonical format. Do not use FORMATSQLif
FORMATASCIIor FORMATXMLis being used.
A FORMATSQL statement affects all extract files or trails defined after it.
Default output
Without options, FORMATSQLtransactions are output as follows, in comma-delimited format:
● The begin-transaction indicator, B.
● The timestamp at which the transaction was committed.
● The sequence number of the transaction log in which the commit was found.
● The relative byte address (RBA) of the commit record within the transaction log.
● The SQL statements.
● The commit indicator, C.
● A newline indicator.
Every record in a transaction is contained between the begin and commit indicators. Each
combination of commit timestamp and RBA isunique. You can customize the output
format with optional arguments.
Default See “Default output”
Syntax FORMATSQL [<option>] [, ...]

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying.

My ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

my ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

Try connecting the iPod Touch to your computer and restore it. http://support.apple.com/kb/HT1414

My iphone 5 suddenly died and won't turn back on even after doing the recovery procedure. Even when I put it on charge the apple sign appears for 5-7 seconds and even after that it won't turn on. Help?!?!

My iphone 5 suddenly died and won't turn back on even after doing the recovery procedure. Even when I put it on charge the apple sign appears for 5-7 seconds and even after that it won't turn on. Help?!?!

DFU mode an try to restore to iOS6.1.4 it will wipe out the whole device if it works but than youll kno if its a software issue if it works or ahardware issue if it dont work

8100 won't send mms

My 8100 won't send mms but can receive them, I'm on T-Mobile and I talked with customer service for over an hour they said they changed the mms settings or something but never sent it to my hand held. Does anyone know how to fix this?

1. Do you have a BlackBerry Data Plan on your account with Tmo?
2. Do this:
1. Options > Advanced > Host Routing Table > Menu > Register.
2. Resend your service books from your carrier BIS site.
From your handheld device: http://www.blackberry.com/btsc/KB15402
From your desktop PC: http://www.blackberry.com/btsc/KB02830
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

IPod touch 5th generation won't connect to the tv after doing up grade

iPod 5th generation won't connect to the tv after doing an software update. Get an error message (this accessory is Not Supported by iPod touch) please help me with this

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Date - before and after precision?

Hi all,
I have two date objects and I am using the before and after methods for a decision process. I would like to know the precision of the above methods. Is the prevision at the seconds, milliseconds, or nanoseconds level?
Any help is appreciated.
Thanks
Saravanan

What does this have to do with JDBC?
java.util.Date uses milliseconds.
java.sql.Data uses nanoseconds (which isn't going to matter unless something actually sets those.)

Compare BEFORE and AFTER image in replicat

Do any of You experts know how to make the following code smaller?
...,p_kolonner=@STRCAT("ID='",@IF(@COLTEST(BEFORE.ID,PRESENT),BEFORE.ID,""),"'>'",@IF(@COLTEST(ID,PRESENT),ID,""),"'¤",
"OBSOLETED_ON='",@IF(@COLTEST(BEFORE.OBSOLETED_ON,PRESENT),BEFORE.OBSOLETED_ON,""),"'>'",@IF(@COLTEST(OBSOLETED_ON,PRESENT),OBSOLETED_ON,""),"'¤",
"SMRT_ID='",@IF(@COLTEST(BEFORE...The actual parameter would look like:
P_KOLONNER: ID=''>'11531'¤OBSOLETED_ON=''>''¤SMRT_ID=''>'1'¤SM_SMID=''>'2011X0074-00'¤SMT_ID=''>''...
This code is part of the params section of a sqlexec in a replicat file where I want to concatenate before and after images of a table into one parameter. I have to replace all NULLs with '' or the whole string evaluates to NULL when one of the columns are NULL. I have a procedure receiving the parameter.
How do I write this code shorter? I have to use less code to accomplish the same thing.

Hi Yosemite:
You're right, the correct term is "Key Fields", in the previous post I made a mistake when referring to it as "Key Part", I'm sorry for the confusion.
Anyway, it is not clear to me if you managed to solve the problem or if you're still struggling with your data loads, if this is the case, Could you please elaborate?
-Which is the data source you are working with?
-Did you map the ROCANCEL field both to the 0STORNO and 0RECORDMODE InfoObjects?
-Are you using Addition or Overwrite on the Update Rules/Transformation Rules to the DSO?
-Have you applied any relevant SAP Note to fix this issue?
In case you have not read the blog by Swapna Gollakota, take a look at it, you might find it useful.
How does a datasource communicates "DELTA" with BW?
/people/swapna.gollakota/blog/2007/12/27/how-does-a-datasource-communicates-delta-with-bw
Regards,
Francisco Milán.
Edited by: Francisco Milan on Oct 29, 2010 12:31 PM

How to create a loop to run total of records for before and after unconstant date

Post Author: Ann2
CA Forum: Formula
Here is the data sample:
ID period code date
1 00 I    01/01/1999
1 00   Z   01/02/1999
1 00 G   12/05/1999
1 00 M   01/01/2000
There are many students with many periods and many codes. I need to save a date when code = 'G' and count separateley records per student/period 2 times - before and equal that date and after that date, so in the end for period 00 I will have 2 values: 3 (before) and 1(after).
There are periods from 00 to 08. I am counting students abscencies before and after warning letter was sent (code G).
The result data should look : 00 01 02 03 04 05 06 07 08              00 01 02 03 04 05 06 07 08     Total
                                            3 0   0   0   0   0   0   0   0                 1 0    0   0   0   0   0   0   0        4
Please help me.
Thank you.
Ann2

Post Author: Ann2
CA Forum: Formula
Thank you for your answer, but I do care about the date the 'G' happened, because I need to reset count.
The logic behind is this:if a student absent for more than 8 times per period - the letter will be sent out to the parents , that will be code 'G' with period '-1' (it may happen that there will never be code 'G' , but I need to track all absencies). Once the letter is sent, the count starts over (the count starts over the next day after code 'G'). The absencies which happened before or the date the letter sent should count toward 'previous' abscenices, all other - absenices after the letter.
So basically I need total per period and total per period before or the day with code 'G'. Running total with reset with formula code = 'G' does not work.
I created a formula field which has global date (when code 'G' happenned) and it says if globaldate >= periodDate then date (1900,01,01) else (2100,01,01) and that formula is ok, but I can not use it in running total or can not create group on it and insert total.
Please help me with this. Thank you.
Ann2

In my class i am suppose to do a before and after shot, how do i have two photos on one page

before and after shots..how do i put two photos on one page?? please help

Good day!
As Photoshop is not a page layout application but primarily image editing software the concept of "page" has limited relevance.
Anyway, you could increase the canvas (Image > Canvas Size) and place the other image (File > Place …) or drag and drop it.
Or create a new image and place both images. Whether doing so as Embedded or Linked Smart Objects makes more sense depends on your workflow, I guess.
File > Automate > Contact Sheet II would be another option.
Regards,
Pfaffenbichler

Report showing costs on cost Centers before and after Cost Distribution

Hi experts,
Is there a report that shows the costs on a Sender / receiver Cost center/Cost elements before and after the distribution cycle is run. What I am looking for a report that shows the costs on Cost center/Cost Element before the cost allocation cycle is run, the allocated costs in different columns.
I would appreciate if some one could let me know the tables to fetch the values for the same ( values before allocation, allocated vlues for the month)
Thanks,
Vijayanth

Hi
S_ALR_87013611... there are many such reports.. U cud have browsed the easy access menu very easily
Regards
Ajay M

Won't send MMS before and after doing froyo 2.2 update

Similar Messages

Maybe you are looking for