Won't start and stuck at "Loading ExporterQuick TimeHost.pm"

Hi,
I just upgraded from CS4 to CS5.5. Been using Premiere for ages, but when I was editing just now it crashed and when I tried to start it up again it loads at stops at "Loading ExporterQuick TimeHost.pm"
I was editing a 720 HD project with 1080 HD .MOV footage and had several clips in my bins. Was a bit slow after a while, so might have been the amount that made it crash. It was working and starting up just fine before the crash and Quick Time is installed and updated.
I've tried starting it up again and again, but with no luck
Anyone??? Thanks for your time!:D

Thank you Todd Kopriva I did a full uninstallation of Quick Time (even though I had the newest version), cleaned the C-drive for Quick Time related files, installed it again and volà! Back to my film project.
Thanks!

Similar Messages

ITunes won't start and asks to reinstall after iTunes10 update.

iTunes won't start and asks to reinstall after iTunes10 update. I have tries reinstalling, but it comes up with it again. I have uninstalled every Apple program and reinstalled them but still the same.

What's the precise text of your message, Callum? There's a few different ones I can think of that mention reinstalling iTunes.

SP1 for Exchange 2013 install fails with ECP virtual directory issues and now transport service won't start and mail is unavailable

SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(

Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibited ted sign. Any suggestions pls.

I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.

Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

Mac book pro 17 inch won't start and it beep

mac book pro 17 inch and it won't start and it beep

It will make it easier to help you w/ your problem to know the exact model, size, year built, RAM installed and OS you're running. A little history will also help.
"it beep"
If it's 3 beeps that's usually a RAM problem.

Cs3 won't start and hand on "reading preferences"

Hello
All of a sudden my photoshop won't start and hang on the splash screen " the last message is "reading preferences"
I Run WINXP service pack2.
Photoshop version is 10.0.1
I rebooted did everything (without re-installing)
Is there a way to get out of this ?
Bruno

You could try resetting your preferences as described in the FAQ.
http://www.adobeforums.com/webx/.ef4a07f/1
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

TS1717 My iTunes won't start and receive "The program can't start because MSVCR80.dll is missing from your computer

My iTunes won't start and receive "The program can't start because MSVCR80.dll is missing from your computer.

Check out the user tip below.
https://discussions.apple.com/docs/DOC-6562

My mac air hS stopped working suddenly it won't start and just beeps

My mac air hS stopped working suddenly it won't start and just beeps

Hi Anjinbombay,
If your MacBook Air won't start up, you may find the following articles helpful:
Apple Support: My computer won't turn on
http://support.apple.com/kb/TS1367
OS X Lion: If you hear beeps when your computer starts up
http://support.apple.com/kb/PH4376
Regards,
- Brenden

There's an "updated.app" laying in Firefox package. Since firefox won't start and "updated.app" will, is it safe to replace firefox package with it?

After last update to last version, FF was running fine before a hardware restart.
Since then it won't start and profile manager either. No error message pops up and console window doesn't trace any event.
firefox package contents an "updated" package likely created by last update.
Will i loose my settings or run into any kind of problem by replacing firefox's package with the so called "updated" one?

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

B noir Help ME! 7.01 won't start and I'm stuck

b noir, I've followed a couple threads where you address the problem where iTunes 7 won't start. I've tried to follow most of the advice you and others have given but nothing is working for me.
So far, I've:
* Searched for Malware (nothing)
* Tried to reinstall QT on top of existing QT (couldn't install)
* Uninstalled from install programs for both QT and iTunes, rebooting, then reinstalling (didn't fix anything)
* Uninstalled QT from Windows Install Cleanup and then doing the repaired from iTunes install with and without virus scan turned on.
*Uninstalled QT & iTunes from Windows Install Cleanup, rebooting, and reinstalled QT on its own then iTunes.
QT opens just fine on its own. And I also deleted the QT directory in Program Files and the two QT files in System 32.
Please help. I'm irrationally mad at Apple at the moment.

b noir-
It looks like you're crazy busy. I finally got the little bugger to work by reading one of your old posts about replacing the Pref files.
navigate to the following folder and open it up:
C:\Documents and Settings\<username>\Application Data\Apple Computer\iTunes\
("<username>" is the name of the account you're crashing in.)
inside, you should see an "iTunes.pref" file and an "iTunesPref.xml" file. rename them "iTunes.pref1" and iTunesPref.xml1". move them to your desktop.
now navigate to the following folder:
C:\Documents and Settings\<username>\Local Settings\Application Data\Apple Computer\iTunes\
inside, you should see another "iTunes.pref" file and another "iTunesPref.xml" file. rename them "iTunes.pref2" and iTunesPref.xml2". move them to your desktop.
restart the PC. log in to the user account that itunes is crashing in. try launching itunes again.
the itunes setup assistant should run. (much like it did the first time you launched itunes after you installed it for the first time.) it's rebuilding the itunes preference files while you're doing that.

Mac Mini won't start and constantly makes disc ejecting noise

My Mac Mini won't start. It was working fine, then just locked up and won't start again. When I push the start button it just makes this repeated disc ejecting noise from the DVD drive. It doesn't make the chime noise or display anything on the monitor. I've disconnected the optical drive, but it didn't help. Then it just doesn't start at all. I thought that if I would disconnect the optical drive, that it would ignore it and just boot off the hard drive, but nothing happened. The power light comes on. Then, if I hold down the power button for 10 seconds it shuts down. The fan operates. It just never attempts to boot up. I can't put in a system DVD because the optical drive is just in eternal eject mode.
If you have any suggestions let me know. Thanks.

I have the same situation.
I think the drive thinks it has a disc to eject or part of the mechanism is stuck and can't return to it's resting position. I was going to disconnect as you tried but now I think I'll try to disassemble the drive to see if there might be some debris jamming things up.
Please let me know if you solve the problem.

Won't boot and stuck at white screen.

I've got a late 2009 model MacBook, and it won't start up. It shows the folder with the question mark. I've performed all tests provided by Apple in the manual, but cannot get any farther than the white screen. Takes forever to show the folder with question mark also.
Things I've tried:
- Reset by holding power button for 5 seconds.
     When I did this, I got the apple to pop up, but after a couple of minutes it changed to a circle with a dash through it. Not sure what that meant.
- Reset the PRAM
     After this, I saw the Apple logo, then the little loading circle popped up (this went on for quite a while).
- Hardware Test
     Selected the language, and then got an alert that said "Apple Hardware Test does not support this machine." Restarted the computer and got the white      screen with the circle with a line through it.
- Holding down the C key during startup.
     Got a blank white screen. Nothing happened.
- Rebooting into Safe Mode
     Saw the Apple logo, then waited for about 5 min, then the computer restarted itself.
The major problem I'm having is that with all of these options I don't get anywhere besides on this white screen. No options are available to choose, so I can't back anything up, select disks to use, etc.

The hardware test finally worked. It's running and I am performing the extended test now. The initial hardware test concluded no issues. Extended test came up with nothing. Memory isn't full. No clue what's going on.

Help! My Tour won't boot, gets stuck on loading screen.

Earlier today, while my tour was charging it randomly rebooted itself, but it wouldn't boot all the way - the load screen froze about 2/3 of the way through and then didn't do anything (for like 15 minutes) I did both a hard and soft reset, but the phone still won't boot past that point. Because it won't boot, I can't connect it to the computer to reinstall the OS or anything.

Hi there,
Unfortunately it sounds like you might have what is called a bricked or "nuked" BlackBerry. There are ways to fix this, but it can take a couple of extra steps.
Start off by downloading the OS from your carrier to your computer. You can find your carrier's BlackBerry download site here: http://us.blackberry.com/support/downloads/download_sites.jsp. Once you've downloaded the OS for your device, install it to your computer.
Next, go to C:\Program Files (x86)\Common Files\Research In Motion\Apploader and open the Loader.exe file (note: if you have a 32-bit OS, there will not be an (x86) after Program Files). Click Next to go to the Communication Port Selection page. Now here is where you need to watch carefully and be on the ball to ensure it works.
Take your battery out of the your BlackBerry and plug your device into your computer. As soon as you see USB-PIN:UNKNOWN in the connection spot, click Next. If you miss it, don't worry, just unplug the device and plug it back in again to start the boot cycle again. Once you've made it to the next page, you should be good to go to reload the OS. At this point in time, you can also reinsert the battery.
Then just follow the steps to reload the OS and you should be set. As a warning though, if you have not recently backed up your device, there is a chance that you may lose the data on the device.
Good luck and let us know if you have any other questions.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Imac won't start. Looks like loading at start

I got my imac about 4 months ago. Today I wanted to turn it on and after the chime I see the apple logo and the spinning wheel and the loading bar. I thought it was updating itself but after the loading bar got full the imac shut down. I had this multiple times and it just won't start. I unplugged the cord waited 10 minutes and tried again. Same thing. It shuts down after the loading bar gets full.
Since I am new to this I can not tell which operating system it is on but I got an upgrade about 2 weeks ago.
Any help is much appreciated!

It's in warranty. Please make a Genius Appointment and take it in for service.

MacBook Won't Start and Hard Drive Full

My daughter's MacBook won't start up completely. It tells me to power off and power on again. I tried restarting using my Snow Leopard DVD and it won't let me load, re-install or restore because it says her hard drive is 100% full. Not sure how it got full and not sure how to get computer working again with no room on hard drive. Help please.

With MacBooks it's only the Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody that don't have FireWire. Which one is hers?
You can get a larger hard drive (sounds like she needs one) and an external case. Put the larger hard drive in the MacBook and do a fresh install of the Operating System and the old hard drive in the external case.
For a hard drive try Newegg.com. For larger drives go to the left hand side. http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f
Here's video instructions on replacing the hard drive on the Aluminum Unibody http://eshop.macsales.com/installvideos/macbookpro_13_unibody_hd/
Here's video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/

Won't start and stuck at "Loading ExporterQuick TimeHost.pm"

Similar Messages

Maybe you are looking for