Won't start unless I upgrade but am using latest version

Help!!
All of a sudden iPhoto 08 is saying when it starts
"you can't open your current photo library using this version of iphoto" then it says I must upgrade to latest version and quits.
I am using the latest version. And I never uninstalled or re-installed, etc. Tried holding down alt and selecting library but no luck. Help please!!
Message was edited by: Mass Confusion

Welcome to the Apple Discussions. It sounds like you have a damaged database file, Library6.iPhoto. Try the three fixes below in order as needed:
1 - launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all options.
2 - rebuild the library using iPhoto Library Manager as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 -Download iPhoto Library Manager and launch.
2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: It may take some time to create the new library if you have a lot of photos.
3 - start over with a new library and import the Originals folder from your original library as follows:
Creating a new library while preserving the Events from the original library.
Move the existing library folder to the desktop.
Open the library package like this.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open Photo window
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Similar Messages

  • Itunes won't start unless i upgrade my quicktime?

    I had unstall quicktime but i didn't know i needed it for itunes to run so i install it and it keeps sayin that Quicktime 7.0d0 is install, Itunes requires 7.1.3 or later
    please reinstall itunes...i did and it keeps sayin the same thing...help plz

    dell2008,
    If you go to the Quicktime control panel and click "about Quicktime" what does it say there for the version number on Quicktime? It should be 7.1.3.

  • Classic won't start, can't upgrade, and other problems...

    There's something not quite right with my Mac, and I can't quite pinpoint it. Because of this, I'm not even certain I'm posting this in the right forum! Here's the situation:
    I have a PowerMac G4, upgraded with a an extra hard drive, an ATI Radeon Pro graphics card, a Sonnet Duet G4 Dual 1.8GHz processor, and (as of today, prior to this 10.4.7) am running OSX 10.4.8.
    When I got the machine, it came with OS 9.1 installed. I later upgraded to 9.2.2, and then eventually to OSX. My Classic system folder stayed at 9.2.2
    About 10 days ago I installed the Sonnet processor upgrade. In order to do so, I had to rejig my system a bit, as the installer for the upgrade only works in 9.2 and not Classic (yeah, bad call on Sonnet's part).
    I partitioned my Back-Up drive, and installed 9.2 on it, installed the software for the processor, and then the processor itself. After checking everything worked, I then unpartitioned my Back-Up drive and removed OS9.2.
    Although the processor works fine, and has doubled the speed of most tasks, ever since it was installed, I have been prone to crashes. Most often when working with large files in various applications such as Photoshop.
    Also, Classic won't start now. I hardly ever use Classic these days, only for one or two tiny programs I could live without, but the fact that it refuses to start is niggling me. I reinstalled OS9.1 from my original disk, and now I can't upgrade to 9.2: all that happens is I get a message saying that I have 9.1 and that it is recommended I upgrade to 9.2! But Classic won't open, so I can't upgrade to 9.2.
    The next thing that's started happening is that my broadband connection keeps dropping. This never happened before. This is happening so frequently it's really annoying; the only thing that cures it is a restart, but restarting 10 times a day isn't funny. I'm using an Alcatel Speedtouch ADSL modem. This has worked fine for over a year.
    Yesterday I tried setting up a wireless connection with a Belkin router, replacing my USB modem, so my wife can use her Windows laptop to surf from the same broadband connection (my Mac doesn't need to be wireless enabled itself). But this hasn't worked, even though we followed the instruction manual exactly. I suspect that the reason this hasn't worked was because of the underlying problem on my Mac, whatever it is. I've gone back to using the Speedtouch modem to connect to the internet for now.
    I've just today done a complete system reinstall of OSX 10.4, and downloaded the upgrade to 10.4.8, in an effort to solve this. Unfortunately, my Mac still seems to be in the same state and it hasn't solved anything. Classic still won't open, the connection still keeps dropping, and I'm almost at the point of kicking the **** thing through a window! Please, has anyone got any bright ideas? I don't know where to start....
    G4 Digital Audio   Mac OS X (10.4.8)  

    Hi, thanks for responding.
    I've made a couple of changes, double-checked everything, and I have to say that now 10.4.8 has been on my machine for a few days, it's a lot more stable. No crashes. Maybe it just needed to "settle in", ha ha. I also got a router and went wireless, something I needed to do so my wife could use her laptop to get online. This seems to have solved the connection dropping.
    So the only thing left is not being able to open Classic. I think maybe you're right, and the new processor doesn't like Classic. But, to tell the truth, I hardly ever use Classic anymore, and I can live without it. So I think I'll leave everything as it is for now, unless something major happens. I spent nearly £500 on the processor upgrade, and it has doubled the speed of my Mac: I really don't want to have to take it out:-)

  • Phone won't start unless plugged in.  No phone or internet service

    On my 4S the phone won't start unless plugged in.  Once plugged in it shows 100% charged.  If I unplug it it will go dark and no button works. 
    Once plugged in and the phone is on it keeps searching.  I receive no phone or internet service.  After awhile it will dim and then go dark.  Have to reset to get it back on.  Each time, it goes to 4PM and 12/31.  Can go through apps, but no sound (music for example). 
    Anyone have these types of problems before. 

    Sounds like its broken. Take it to an Apple store for replacement, as its still in warranty. Make an appointment first. http://www.apple.com/retail

  • Screen saver won't start since Lion upgrade. Two different machines, same issue.

    Screen saver won't start since Lion upgrade. Two different machines, same issue. Help

    For anyone following this thread, I've found a solution to my problem. Turns out that a cute widget called FishTank appears to be the culprit. With it running in Dashboard (even when I don't see Dashboard) the Screensaver and Sleep functions don't work. I turned it off, not because I'm clever, just because I tired of it, and voilà, Screensaver and Sleep are now working. It can stay in my widgets list without any problem, it just can't be turned on. I'm going to delete it anyway, however.
    Hope this points the way to solutions for some of the rest of you!
    Cheers!
    Keith

  • Aperture won't start unless connected to my Vault USB Drive

    Hello All,
    I have a 17" MBP runing aperture. My Aperture won't start unless the USB drive containig the vault is connected. Anyone having the same issue? Any remedy to this?

    Try holding the option key down whilst clicking on the Aperture icon in the dock and choosing your library this way.
    Tony

  • Fascinate won't start unless plugged in

    My Samsung Fascinate won't start unless plugged in. Even with a full battery. It shows a dead battery and won't start.

    How old is the phone/battery?  I would order a new, OEM battery from an online retailer (usually inexpensive, fast delivery) like cellularaccessories.com or batteries4less.com and see if that fixes the issue.  Batteries do wear out....

  • G4 won't start unless from a restart or pmu reset

    my G4 won't start unless from a restart or, if the computer has been shut down, I have to reset the pmu - with inside button or by removing battery.
    Can anyone think of why this happens? What goes on with a shut down that doesn't with a restart? With the problem, nothing happens after the chime and I must hard shut-down, unplug and reset pmu, then it's fine.
    Thanks for any thoughts or suggestions.
    Henry

    well, I can't find anything wrong with it. maybe my logic board is shot. i guess i'll take it in to tek serve or an apple store and see if they can figure it out.
    thanks for the suggestions, tom.
    henry

  • Ethernet won't start unless I run systemctl restart dhcpcd.service

    My ethernet connection won't start unless I do
    sudo systemctl restart dhcpcd.service
    I looked through the Arch Wiki and I don't feel like it goes over how to set up the ethernet and I couldn't find much in Google. Any help appreciated. Thanks.

    jasonwryan wrote:https://wiki.archlinux.org/index.php/Sy … mctl_usage
    I got it working now after reading that wiki page
    Just had to do
    systemctl enable dhcpcd.service
    Thanks!

  • Howdy. I've just purchased a new iPhone 4, but my Mac's version of iTunes won't support it. I need to upgrade iTunes to the latest version. But, alas, when I downloaded it, my Mac won't support it. My Mac's details are; 10.4.11 Processor Dual 2 GHz PowerP

    Howdy.
    I've just purchased a new iPhone 4, but my Mac's version of iTunes won't support it. I need to upgrade iTunes to the latest version. But, alas, when I downloaded it, my Mac won't support it. My Mac's details are; 10.4.11 Processor Dual 2 GHz PowerPC G5. I need to get up to 10.5.
    Can I download the higher operating system? If so where from? Or must I buy it from the shops?
    Your help would be greatly appreciated.
    Andy.

    Mac OS X 10.5 Leopard installation system requirements
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
    If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
    MB427Z/A  Leopard 10.5.1 install DVD
    MB576Z/A  Leopard 10.5.4 install DVD
    MB021Z/A  Leopard 10.5.6 install DVD (single user)
    MB022Z/A  Leopard 10.5.6 install DVD (5-user family pack)
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    The DVD should look like this
    Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
     Cheers, Tom

  • Hi i don't no if anyone can help me, i have a ipad 1 and have been trying to upgrade it to the latest version and cant find anywhere to do so? on my phone it is in the settings to upgrade, iv been online and looked but cant find any link.

    Hi i don't no if anyone can help me, i have a ipad 1 and have been trying to upgrade it to the latest version and cant find anywhere. on my phone it is in the settings to upgrade, iv been online and looked but cant find any link. can someone send me a link or direct me the right way many thanks.

    Upgrading the iOS "over-the-air" was introduced with iOS 5. If you are currently running an iOS version < 5.0 you can only update through iTunes. Connect your iPad to your PC or Mac. Open iTunes and click on "Check for updates"

  • I have an iphone 4 with 4.3.2 version, want to upgrade but my phone is not getting detected on my comp  on itunes. i want to upgrade it to the latest version of the software, please help

    i have an iphone 4 with 4.3.2 version, want to upgrade but my phone is not getting detected on my comp  on itunes. i want to upgrade it to the latest version of the software, please help

    If your phone isn't being recognized by your computer, you need to follow the steps in this article to resolve that
    Also, some basic isolation needs to be done. Does it show up in itunes on any other computers? do you have other cords you can test with to see if it might be the cord? if the phone doesn't show up on any computers, it's likely your phone has a hardware issue
    http://support.apple.com/kb/TS1538?viewlocale=en_US is the article to use if you want to concentrate on trying to get a particular computer to recognize your phone

  • I have ip 3gs and ios 4.1 i want to upgrade it to download latest version of apps ,which ios will be compatible and is there any danger to update ios before i erased all settings and content and i tried to update but it failed .it is working properly

    i have ip 3gs and ios 4.1 i want to upgrade it to download latest version of apps ,which ios will be compatible and is there any danger to update ios before i erased all settings and content and i tried to update but it failed .it is working properly but i want to update from itunes.iwill do back up but is there any other thing i will face after updating like it will jut show apple loge and will not work. please answer quickly

    An iPhone 3GS is too old to update to the very latest iOS and you will never be able to use apps that are compatible.  The phone is just too old now in technology terms and the app makers have all moved on, so it's time to get a new phone. 
    Ideally, perhaps get an iPhone 4s or if you can afford it, an iPhone 5s or 5c which are the newest models.

  • When updating my apps it stoped half way through and won't start so now I can not use the app recently updated it to ios7

    and won't start so now I can not use the app recently updated it to ios7 I have tried turn the device on and off still hasn't work and I would like to actually use my apps and I can not download new apps

    If the apps are waiting:
    Fix iOS Apps Stuck on “Waiting…” During Download & Install
    Otherwise:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Download the apps to your computer and sysnc
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             

  • TS3682 i have upgraded ipad with the latest version of ios. However, while restoring backup from itunes to ipad, a password is being asked. i do not have password, how to go about?

    i have upgraded ipad with the latest version of ios. However, while restoring backup from itunes to ipad, a password is being asked. i do not have password, how to go about?

    Restore from iCloud Backup
    1. Erase all contents and settings (Settings>General>Reset>Erase all content and settings)
    2. You'll be asked twice to confirm
    3. You'll see Apple logo and progress bar
    4. You'll see a big iPad logo on screen
    5. Configuration start
    6. Set language
    7. Set country
    8. Enable Location Service
    9. Select network, enter password and join network
    10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    11. Selected Restore from iCloud Backup

Maybe you are looking for

  • TOP n sometimes gives wrong number of lines (SSRS 2008 SP1)

    Hello all, a workmate has created a dashboard report which contains (among other items) a top n chart item. The user can select the value of n using a report parameter. We have observered that for some values of n and specific values of the other par

  • Output Type for Form 16

    Hi, I want to know the output type for Form 16, from where i can find it.. Thanks

  • HT1918 Purchase Details?

    How do I find the details of purchases?  I keep clicking on "purchases" in the account area but it always says it is unavailable.  Any suggestions?

  • Regarding Error. Description Spool Request

    Hi all,    How do we get error description of a spool request in a program , iam able to catch the spool no , but iam not able to get the error description of the same. Thanks & Regards, Kishore Kumar Yerra.

  • Lost properties options on bottom of page!

    hey guys, very new to dreamweaver so please please be kind! i've accidently got rid of the (properties?)options that display basic font, size headings, link etc options that usually sits at the very bottom of the page see here. i've tried looking thr