Won't start up after installing iTunes update

After installing an iTunes update yesterday morning, I shut down my computer while I was gone all day. When I returned home and restarted it, I got the white Apple screen and gray wheel for an unusually long time, 30-45 seconds. Then the screen turned black and the following appeared:
Sept 13 09:33:05 com.apple.inbindd: Bad System Call
Sept 13 09:33:05 com.apple.inbindd: respawning too quickly! throttling
Sept 13 09:33:05 com.apple.inbindd: 9 more failures without leaving at least 60 seconds will cause job removal
Sept 13 09:33:05 com.apple.inbindd: will restart in 60 seconds
... some other prompts flashed up on the screen, too quickly to read what they said...this continues for at least 2 minutes before getting this message:
Sept 10 06:33:05 com.apple.inbindd: to many failures in succession
Sept 10 06:33:05 localhost:/ root#
And then nothing happens. I found a ProBook user on another board who got the same error after installing an iTunes update, and restarting in 'safe mode' seemed to help him. I tried to follow the same instructions but they must be different for the iMac--holding down the shift key while restarting made no difference.
iMac 17" Intel 1.83 GHz 512MB 160GB SD/AP/BT
Not being able to even get to the desktop--I am at a total loss. Please help!

The Safe Mode startup key combo is the same; Startup key combinations for Intel-based Macs, it just isn't working for you.
I suggest starting from the Install DVD that came with your iMac. Once in the Installer you will find tools in the Utilties menu. Using the Disk Utility try repairing the startup volume.

Similar Messages

Ipad won't start up after installing an update. Shows itunes icon with cord from the side.

ipad won'tstaart up after installing an update. Shows, itune icon and cord going tothe side. Cant make it do anything else.

That means that you have to restore the de ice using iTunes on a computer. There is nothing else that you can do to fix it now and you cannot back it up now either. Connect the iPad to your computer and launch iTunes and restore the iPad.
IF you don't have a computer, find someone that has one running iTunes or go to an Apple Store and ask them to restore it for you.

MacBook won't start up after installing iTunes 8 & updates ...??

My MacBook is a little more than a year old (read, no longer under warranty ...) and it's currently in a coma.
Nothing was out of the ordinary prior to the MacBook going weird - I downloaded a bunch of photos from my camera, ejected a USB drive and immediately after that I tried to launch iPhoto - it froze and I tried to force quit (several times) without success. I then pressed the power button, and that was the last time I saw my desktop.
Whenever I press the power button to try to turn it on, the Apple logo comes on (but no spinning wheelie) and then a grey screen comes up saying my MacBook needs to be restarted - either press the power button for a few seconds or try the reset button (which is where???).
Anyway, for the next two and a half hours, I tried everything I could find on the forums to revive my MacBook. I did the PRAM thing, pulled out the battery, did the Cmd+S/V gig (that went no where either, just got stuck on a black screen with lots of words after a while), got my old OS X install disc out (couldn't find the Leopard at 2:30AM ...) ran through the whole repair thing ... Point is, I'm still looking at the screen that's telling me to restart my computer.
I've gone through the forums here and it seems like some people with year-old'ish MacBooks who have installed iTunes 8 as well as the latest software updates seem to have the same problem. Now I know it's my fault I didn't backup my data so I can't just wipe the HDD and hope for the best. If I knew installing iTunes 8 would cause this, I wouldn't have bought the new iPod Touch 32GB, which requires the iTunes 8 to work. And I usually install all the updates Apple tells me to install ... maybe this is what you get for being gullible.
Anyway, I think I'm going to have to take it to a service centre, who has quoted me at least $75 to $250 to have the thing "diagnosed", let alone fixed.
How do I know if I broke the MacBook or iTunes & the software updates did? Or are MacBooks really pre-programmed to die after the one year warranty expires ......?? Eitherway, I'm really put off by Apple right now.

Another victim!
Try booting up from the install disc (insert and hold down C), then run disk utility and and check your drive for errors, and then if possible try fixing them.
This didn't work for me, however after deleting my hard drive and repeating the above procedure no errors were found, and after a reinstallation of OSX my computer is working although extremely slow.
As for recovering your data I'm not sure. So far I haven't heard of it being done, although I have heard of new hard drives needing to be purchased.
Good luck. And spread the word!

Computer won't start-up after installing Intel update :( :( :(

I have no idea what's wrong, but I had an Intel update installed and when I rebooted my machine it wouldn't get past the Apple logo (and hasn't each of the 10+ times I've tried). In fact, when I leave it on the Apple logo at start-up, it attempts a full reboot after about 10 minutes, then proceeds to get stuck in the exact same place. What is going on?!?

mrmilian wrote:
I am having the exact same problem - installed the update last night and now I can't get past the grey startup screen. I have tried rebooting from the cd, used disk utility to repair the disc, etc as suggested. I have also booted into single user mode and repaired through there using /sbin/fsck -fy. None of these has done anything...
When repairing I get the message "checking catalog file > incorrect block count for file pcscd.pub > should be 16 instead of 17". this was repaired when booting from the cd and then repaired again in single user mode... Trying to exit from single user mode has caused a whole string of errors "couldnt read user-sspecified computer name/ local hostname/ config daemon no longer available/ etc" mDNSResponder(40...70..120 and still going...]
My computer was working absolutely fine until I installed this update and now I'm completely stuck. ANy help MUCH apprecaited.
Again, you will get better help if you start a new thread. Unlike the OP, you can get into single-user mode. Also unlike the OP, you are running Leopard rather than Tiger. I'd suggest posting your own thread in the Leopard forums.
Very quickly, though, you should rerun fsck/Disk Utility repair until you get a message saying that "The volume <whatever> appears to be OK". If you cannot repair that way, you have to choose between trying a third-party application like DiskWarrior and reinstalling the OS.
- cfr

Won't start-up after installing Apple Update!

My MacBook Pro was working fine until just now when I accepted Apple's link to Update iTunes using Mountain Lion.
Now only starts in 'safe mode'. On start-up just displays grey screen with Apple logo and Spinning Wheel.
What have you done to my Mac Apple?

If you have more than one user account, these instructions must be carried out as an administrator.
Boot in safe mode and launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Question about a log in Console after installing iTunes update

After installing iTunes I noticed these logs in Console:
11/29/12 6:11:47.673 PM sudo[1485]: root : TTY=unknown ; PWD=/private/tmp/PKInstallSandbox.8WAxMg/Scripts/com.apple.pkg.MobileDevice.hTs dtR ; USER=XXXXXX ; COMMAND=/bin/launchctl load -w //System/Library/LaunchAgents/com.apple.MDCrashReportd.plist
11/29/12 6:11:47.691 PM sudo[1487]: root : TTY=unknown ; PWD=/private/tmp/PKInstallSandbox.8WAxMg/Scripts/com.apple.pkg.MobileDevice.hTs dtR ; USER=XXXXXX ; COMMAND=/bin/launchctl start com.apple.MDCrashReportd
I noticed that they have something to do with Crash Reporter, but are they a crash, or some command to the file during the install of the update? Any insight from someone who understands the terminal commands would be appreciated.
Thanks,
Scott

The Safe Mode startup key combo is the same; Startup key combinations for Intel-based Macs, it just isn't working for you.
I suggest starting from the Install DVD that came with your iMac. Once in the Installer you will find tools in the Utilties menu. Using the Disk Utility try repairing the startup volume.

Podcasts not downloading after installing iTunes update

I just installed the new update, and now NONE of my podcast sources are downloading. I have tried rebooting, and got the same result. I have never before had all of my regular sources unavailable at the same time. Anyone else having this problem after installing the update on a Mac?

ME TOO. Now I want to know how I can DOWNgrade iTunes.
Also, when I have left iTunes open for a while, I come back to it, and the window is all indecipherable garbage.
And don't waste your time. I have done it all, and nothing has helped. I either download podcast by painful podcast or I don't get anything at all.
G4 Mac OS X (10.4.9)

IBook G4 won't start up after installing promted itunes & security update

HELP.
My iBook G4 was prompted to update iTunes & some security update. I always do this when prompted, and restart as requested.
I installed the updates and restarted, but this time my iBook won't boot up. It makes the regular chime noise, goes to the gray screen, gets past the apple logo, then goes to a blue screen with the cursor in the upper left corner. The cursor moves just fine, the caps & num lock lights work, but it just never gets past the blue. If I leave it alone for a while, the cursor disappears, and I get the turning circle in the lower middle of the screen (the one that comes up during the gray screen). It just sits and sits on the blue. Hard drive isn't making any unusual sounds.
I tried starting it up from the Install Disc, which worked fine. I ran the disk utility and it said it didn't need any repairs.
Still won't start up.
I did the cmd + opt + p + r to get the 3 chimes... no change.
I tried the fsck thing, it didn't do anything.
HELP.
Am I a goner?
I saw that some other people had problems, but it seems like everybody's is just slightly different. My display looks totally normal, just won't get past the blue screen. My disk utility said that it didn't need any repairs? Looks like most other people at least saw some errors in there...

I think Carolyn misunderstood the "3 chimes" comment. I think what you meant was that you held down the key combo until you heard the normal startup chime for the third time, not that the iBook gave you the 3 long beeps of a failed POST (power-on self test) which could indeed indicate a RAM problem.
It's more than likely not a RAM issue. These bad updates occasionally happen and the way to handle it is to do what you're doing now; backup what you can and then do an Archive and Install of the OS (although usually a couple of reboots, start in safe boot mode and reinstall the update is usually all that's needed).

Power Mac G5 won't start up after a security update, please help!!!

Hi all,
My Power Mac G5 version 10.4.11 keeps showing a black video, no beep, no start up chim, this occured after updating a security patch 2008-7 from Apple website, asked to reboot then I encountered this mess.
The powerlight is turn on with solid white color. My display also has its powerlight turn on with solid white. But not nothing happens, except the fan noise becomes gradually louder and louder. I wait for hours ... but ...
My system just won't start up. Although I tried to reset the SMU, reseated RAM...
I tried also to re-install the OS by CD but it's impossible to insert it to the DVD tray.
Any help is greatly appreciated, thank you for your time.
Sgmed.

Hi BDAqua,
After weeks of strugle I can use my MAC as normal, but everytime I shut it down, she cannot wake-up, I had to refer to your hints in order to start it up again. So right now I can use my MAC every day with "SLEEP" mode.
She just cannot RE-START or wake up after a SHUTDOWN.
Any suggestion is greatly appreciated, here under I pasted the log file retrieved from Disk Utilities.
(I tried also to reset PMU, SMU and PRAM but nothing helped. Perhaps she is in need of a brand new PRAM battery???
Oct 26 23:54:04: Disk Utility started.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Preparing to secure free space : “Untitled”
Creating Temporary File
Securely erasing file
Creating Temporary File
Securely erasing file
Secure Erase Free Space stopped after 14 hours.
89.0% complete.
Erase complete.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
User differs on ./Users/Shared/SC Info, should be 0, owner is 501
Group differs on ./private/etc/authorization, should be 80, group is 0
The privileges have been verified or repaired on the selected volume
Permissions verification complete
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Owner and group corrected on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities
Permissions corrected on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
Owner and group corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
Permissions corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
User differs on ./Users/Shared/SC Info, should be 0, owner is 501
Owner and group corrected on ./Users/Shared/SC Info
Permissions corrected on ./Users/Shared/SC Info
Group differs on ./private/etc/authorization, should be 80, group is 0
Owner and group corrected on ./private/etc/authorization
Permissions corrected on ./private/etc/authorization
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.5 GB (237,882,122,240 Bytes)
Used : 11.2 GB (12,042,969,088 Bytes)
Number of Files : 298,349
Number of Folders : 76,969
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
70 %)
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Oct 27 20:59:00: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.6 GB (237,949,358,080 Bytes)
Used : 11.2 GB (11,975,733,248 Bytes)
Number of Files : 298,359
Number of Folders : 76,970
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Oct 28 00:31:37: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Oct 28 18:50:53: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 28 21:00:10: Disk Utility started.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Oct 29 19:55:10: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist, should be -rw-rw-r-- , they are -rw-r--r--
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player, should be -rwxrwxr-x , they are -rwxr-xr-x
Permissions differ on ./Library/Internet Plug-Ins/flashplayer.xpt, should be -rw-rw-r-- , they are -rw-r--r--
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist, should be -rw-rw-r-- , they are -rw-r--r--
Owner and group corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist
Permissions corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player, should be -rwxrwxr-x , they are -rwxr-xr-x
Owner and group corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player
Permissions corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player
Permissions differ on ./Library/Internet Plug-Ins/flashplayer.xpt, should be -rw-rw-r-- , they are -rw-r--r--
Owner and group corrected on ./Library/Internet Plug-Ins/flashplayer.xpt
Permissions corrected on ./Library/Internet Plug-Ins/flashplayer.xpt
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.6 GB (237,921,976,320 Bytes)
Used : 11.2 GB (12,003,115,008 Bytes)
Number of Files : 299,521
Number of Folders : 77,045
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Oct 29 20:22:20: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 30 17:14:49: Disk Utility started.
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,409,587,200 Bytes)
Used : 11.7 GB (12,515,504,128 Bytes)
Number of Files : 299,790
Number of Folders : 77,188
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 30 19:41:53: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 31 20:48:58: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,362,040,832 Bytes)
Used : 11.7 GB (12,563,050,496 Bytes)
Number of Files : 300,773
Number of Folders : 77,858
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Nov 3 15:48:08: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,411,020,800 Bytes)
Used : 11.7 GB (12,514,070,528 Bytes)
Number of Files : 300,976
Number of Folders : 77,880
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Nov 3 16:12:13: Disk Utility started.

Starting Problems after installing Software Update SecUpd2009-001ppc.pkg

Hey Guys,
After installing the SecureUpdate from January 2009 today my iMac just seems to freeze at startup. Only thing appears is the grey apple and the loading animation.
*Already tried Disk Utility, fsck, and Safe Startup.*
+-Disk Utility doesn't find any problems+
+-fsck doesn't find any problems either+
+-Safe Startup just doesn't work+
What i found here in the discussion forum is the solution with the terminal. Only thing is that I won't get further till following point 6:
*(post from nleoncavallo )*
0. Use a second computer to download the update to a USB drive. (in theory, I imagine the update is somewhere on the hard drive, but I don't know where)
1. Boot from the original install CD (pressing the "C" key while the computer starts)
2. Get up to the point of the installation screen, then start Terminal
3. type "mount" to see a list of the volumes
4. type "find /Volumes/thenameoftheUSB/*.dmg" to get the full path of the update file (so you can copy it and paste it in step 5).
5. type "hdiutil attach /Volumes/thenameoftheUSBdrive/pathoftheupdate/SecUpd2008-008Intel.dmg" (now you have mounted the update file)
*6. type "/Volumes/Macintosh\ HD/usr/sbin/installer -pkg /Volumes/Security\ Update\ 2008-008/SecUpd2008-008Intel.pkg -target /Volumes/Macintosh\ HD"*
7. Exit Terminal and select "Startup Disk" and reboot.
I _already checked Typo_ and i am really going crazy about this. What terminal replys:
+"-bash: /Volumes/Macintosh HD/usr/sbin/installer: No such file or directory"+
Can somebody help me?

Thank you for your fast reply!
Maybe I should have made it clearer. This problem I've got adheres with the software update I've installed. I tried the solutions out you send me with your link but they didn't help me out. Thing is, that i forgot to say:
After a while the grey screen disappears and instead a blue screen comes to vision. But thats it. Then nothing happens anymore.
So far, the terminal thing gives me the most trustful feeling in this. So I still need help!

Windows 7 (64) Blue Screen of Death at Start up after installing iTunes 10

I just got a brand new computer a week ago and decided to install iTunes 10 this evening. The install finished successfully and a message prompted me to restart to complete the installation. So I did. Now my machine will not boot. Each time it does, I get a blue screen of death. Attempting to restore the system fails.
I was able to start Windows in Safe Mode once but I wasn't able to uninstall programs while in safe mode so I couldn't remove itunes 10. And now I can no longer start my machine in Safe Mode.
Has anyone else experienced this? Any ideas to solve it?
Message was edited by: BrianCoker

Windows 7 64 bit core i7
BSOD while updating to iTunes 10 with suspended installation of Apple Mobile Device Support. Network drivers no longer working as a result. Attempted fix by downloading from a different machine and competing install via files transferred over on flash drive. No dice. Attempted removal of iTunes, QuickTime, Apple Mobile Device Support, Apple Application Support, Apple Software Update to see if this would fix. Followed this up with a restart. This seems to have improved matters as system is starting up faster. No dice. Try reinstall network drivers from Sony ViaoCare disk. Installed and restarted. No dice. Next, try Widows 7 Network and Sharing diagnostics. No dice. Next try manual removal & reinstall of network driver using Device Manager, restart. Can't seem to re-install Network Controller. Still trying to solve this.

'09 MacBook Pro won't start up after installing new hard drive and restoring from an external hard drive.

I am in the process of replacing my hard drive and have run into a problem. I reinstalled OSX 10.6.3 using a DVD I bought off Amazon. That went well and I then restored my hard drive using an external and Time Machine.
After that, things still looked good but I couldn't log in to my user (and access my MacBook) because my password wasn't working even though my hint was correct. Yes, I am POSITIVE my password was correct; I even tried a couple other passwords to humor myself. I then gave up and decided to restart the computer.
Now my MacBook won't start up at all. It goes o a gray screen with a still loading symbol for a couple minutes and then goes to a solid light blue screen. I've tried starting up while holding command+R and I tied holding just command and neither worked.
Did I install the wrong OSX because I didn't use the same DVD that came with the laptop? Is there something wrong with my hard drive already?
Please help =[

You probably bought the wrong RAM that has different pin assignments, so it won't fit in the slot. Return it.
I bought 4GB Memory online for my MacBook, so I could get it to run twice as fast.
Doubling the memory does not make your computer run twice as fast.

How do I stop an Error Message that I now get on start up after installing Itunes 10.2.2

I have now installed Itunes 10.2.2 twice and continue to get the following error message when starting up my laptop.
AppleSyncNotifier.exe
CoreFoundation.dll not found.
How do I get rid of it?

... let's have one more go at a repair install, this time of Apple Application Support. (That's where the CoreFoundation.dll program file lives.)
So pretty much the same as last time, except this time we select Apple Application Support in Add or Remove Programs and then do a repair install of that.
Any change?
If not, let's try download the MobileMe Control panel, and then installing that. It's a much smaller download than the iTunes installer. (I fear your internet connection charges might be steep out there in the bush.) Here's a link to the installer:
MobileMe Control Panel for Windows
If that installs successfully, does the message go away after the restart? (If so, you can probably uninstall the control panel without the error coming back.)

IBook G4 won't start up after installing Airport Extreme card

Hi,
just installed an Airport Extreme Card into girlfriends iBook G4 (10.4.5), which now won't start up. After pressing the start button all I hear is the fan spin (pretty fast actually), but nothing else happens.
When I remove the card the iBook starts up normally.
Any thoughts what could be wrong? Bad card? Bad connection?
Thanks a lot

Sven, Welcome to the discussion area!
Are you certain that you have an AirPort Extreme card?
Are you certain that it is an iBook G4? The iBook G3s require the original AirPort card.
If both of those are OK, then one (or more) of these is true:
The card isn't installed correctly.
The AirPort Extreme card is defective.
The iBook's motherboard is defective.

After installing itunes update I cannot open my itunes music files. How can I fix this problem?

I installed the latest Itunes update and after installing I cannot open my ITunes music files. How do I fix this problem.

Hey Joey BOD,
It sounds like you can't open your Music app on your iPhone after the update? First, try force closing the Music app if it is open in multitasking, which you can find out how to do here:
iOS: Force an app to close
http://support.apple.com/kb/HT5137
And if that doesn't work, I would reset the device:
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
via: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
And if that doesn't resolve the issue then I would backup the device to iTunes and restore it. Just be cautious and back up first, since restoring deletes all content and settings:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Have a great day,
Delgadoh

Won't start up after installing iTunes update

Similar Messages

Maybe you are looking for