Won't start up after re-setting password

Forgot password (oops) after following directions for resetting password, computer will not start up completely.
Get apple logo, then starts booting OS X, then I get a plain solid blue screen...nothing after that (cursor still moves)
tried standard utilities check, no problems there.
Help!

KellyeT, Welcome to the discussion area!
See if the information in "I see a blank blue screen when I try to start up my computer" helps.
If not, take a look at KB 106464, Your Mac won't start up in Mac OS X (Mac OS X 10.3.9 or earlier).

Similar Messages

Computer won't start up after entering my password

When I turn on my computer, it immediately goes to the screen where I enter my password. I enter my password, and it goes to a gray screen where there is a progress loading bar. The bar loads about 1/4 of the way and the computer just shuts down. I can't restart it in safe mode, and I even tried to re-install Yosemite, and I can't do that either. I have no other ideas!

Do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then try to re-install the OS.
OS X Recovery
OS X Recovery (2)

MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

Try resetting the SMC.
Barry

Iphone 6 won't start up after new update

iphone 6 won't start up after update, what can I do?

And it stops at that screen and that is all that shows? Then you need to try and force the device into Recovery Mode and restore. See the instructions in this support document. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

My C3 won't start up after get wet.

My C3 won't start up after get wet, i dries it and put it in uncooked rice for 24 hour, it still won't start up. When i charge it keep red light and wont start up. Can anyone help me? p/s:The phone still under warranty.

is correct, contact your local Xperi Care they might be able to tell you if they can repair the phone or the extend of the damage http://support.sonymobile.com/global-en/contactUs/

Acrobat Pro for Mac won't start, even after restarting the machine. Any suggestions?

Acrobat Pro for Mac won't start, even after restarting the machine. Any suggestions?

Hi Patrick,
Can you please mention the version of Adobe Acrobat that you are using and on what OS version. Also mention whether this problem has started recently and was running fine earlier or is it a fresh install and has never worked for you.
Have you tried uninstalling and reinstalling the product after you started facing this issue.
-Shashi

'09 MacBook Pro won't start up after installing new hard drive and restoring from an external hard drive.

I am in the process of replacing my hard drive and have run into a problem. I reinstalled OSX 10.6.3 using a DVD I bought off Amazon. That went well and I then restored my hard drive using an external and Time Machine.
After that, things still looked good but I couldn't log in to my user (and access my MacBook) because my password wasn't working even though my hint was correct. Yes, I am POSITIVE my password was correct; I even tried a couple other passwords to humor myself. I then gave up and decided to restart the computer.
Now my MacBook won't start up at all. It goes o a gray screen with a still loading symbol for a couple minutes and then goes to a solid light blue screen. I've tried starting up while holding command+R and I tied holding just command and neither worked.
Did I install the wrong OSX because I didn't use the same DVD that came with the laptop? Is there something wrong with my hard drive already?
Please help =[

You probably bought the wrong RAM that has different pin assignments, so it won't fit in the slot. Return it.
I bought 4GB Memory online for my MacBook, so I could get it to run twice as fast.
Doubling the memory does not make your computer run twice as fast.

Eclipse IDE won't start anymore after most recent security update

Hello everybody,
after today's security update the Eclipse IDE won't start anymore on my system, I just receive the following error message:
A Java Runtime Environment (JRE) or Java Development Kit (JDK) must be available in order to run Eclipse.
No Java virtual machine was found after searching the following locations: /Applications/eclipse/Eclipse.app/Contents/MacOS/jre/bin/
java
'java' in your current PATH
Java is installed and Eclipse ran smoothly until I upgraded. Other Java programs like Visual Paradigm still work without problems.
Does anybody have an idea what I can do about this? I have already tried repairing permissions, to no avail.
Best regards,
Björn
Mac Pro Mac OS X (10.4.9)

I have narrowed down the problem even more:
Obviously system path variables are not set anymore on my system for UNIX processes that are started in background, whereas starting applications from terminal using the open command ('open Gimp.app' for instance) still works without any problems.
Any ideas where to change this behaviour?

IPod Touch 1st generation won't start up after hard reset

My iPod Touch 1st generation stopped working after I clicked "Erase all contents & settings". It won't start unless I hold the Sleep/Wake button & the Home button together. Then I get the Apple Logo but after a short time a wheel appears just below the logo which never disappears. I have pressed those 2 buttons while the iPod is plugged in to a power source & left it overnight but the wheel still doesn't disappear & nothing further happens. Any suggestions?

Try here:
iOS: Not responding or does not turn on

BB z10 won't start up after updating to bb link

I accidentally dropped my phone on the floor, and it won't start up.
here are the following steps that i already did:
1. I already tried to update it on the bb link, after successfully updating i remove the usb cable, however it didn't start up. everytime i try to do a hard reset it automatically turns off, even when im seeing the blackberry logo on the screen. it goes off again.
2. i tried also to charge it first and then the blackberry name appears on the screen it will also automatically turns off and after that it will charge only and then again the blackberry name appears on the screen same thing happen again.
3. I tried to uninstall the bb link to my computer and install again the bb link then update it again, after the successful update. still no changes happen
4. I also tried to update the bb z10 os, in a hard way through internet explorer, nothing change still won't start up.
There's one thing that i've noticed everytime I plug the usb cable on my phone, through the computer and access the bb link, it will connect and then it will disconnect it goes on and on, as i seen on the screen. I updated the usb cable plugging in,thinking that can fix the problem but still nothing change.
I know that my bb z10 works fine up to now, because there is an instant that the bb logo appears on the screen completed loading and i can navigate it for a while like changing the language and connecting to a wifi, and the logo of my sim card appears on the screen, however it will take few seconds only, and then it will turn again to the same situation that occurs on my phone.
Please help me find a good solution regarding on my phone problem.

Since this occurred right after dropping your device it's probably damaged internally. Not much we can do here for that.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Won't start up after using as host for target firewire...help?!

I used my iMac G4 1.25ghz flatpanel to install Tiger to my G3 iMac via Firewire Target mode, and now the G4 won't start up/has no power.
Because the G4 wouldn't start up in Target Firewire for some reason, i used the G4 as the host and started up the G3 in Target, restarted the G4 from the DVD, and installed Tiger to the G3 (i am positive i used the correct destination disk, adn the G3 is now showing the Welcome screen so it was sucessful).
Afer installing, the G4 automatically restarted on the Welcome screen- apparently normal in this situation, from what i read- and i turned it off via its power button because i want to do the Welcome stuff from the G3 itself (was that a mistake?). I'm thinking i might have only put it to sleep, tho, before i pulled the Firewire cable.. i didn't hold the button down long.
Afer i pulled the Firewire cable, the G4 wouldn't start up again via the Power button. I pulled the power cable and plugged it in again, but still absolutely nothing- obviously no power. No response to trying to reset PRAM, start it up from an external drive, via firewire, or CD- it's like it's unplugged.
What could have happened? Would pulling the Firewire cable have messed up PMU if it was only asleep, not shut down? Could i have damaged the power cable when i pulled it?
Could having used it to install to another drive in Target mode have screwed it up (i've read of many people doing this without problem).?
Should i try pushing the PMU button, or are there other things i can try first? (i can borrow a power cable from my son's G4 iMac)
I'd sure like to get it booted in some way or other ASAP to make sure i didn't mess up the G4's hard drive somehow...

thanks, i'm going to read and bookmark that for future ref... i had a post not post, tho, that said: tempest in a tea-pot, it was just something with the power supply. As soon as i tried a cord from a friend's a few hours later, it powered up. Oddly enuf, when i then reattached the original power cord, it powered up from that, too.
I wonder if these have some kind of time-delayed automatic reset on the firewire or power supply or pmu, because NOTHING i did worked right after it happened.

My MacBook Pro will not start up after entering correct password.

My MacBook Pro will not start up after entering password. Circle with an X in it and 'cancel' below it is on bottom of screen. When clicking on cancel, nothing happens. This just started last night.

Hi MJTOOTS,
Since you are getting to the login screen, it is booting past the "gray screen" phase, so try the steps in this article, like a Safe Boot.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
You may also want to see if any of your Login Items are causing an issue.
OS X Mavericks: Open items automatically when you log in
http://support.apple.com/kb/PH14173
Thank you for visiting Apple Support Communities.
Nubz

IBook G4 won't start up after installing Airport Extreme card

Hi,
just installed an Airport Extreme Card into girlfriends iBook G4 (10.4.5), which now won't start up. After pressing the start button all I hear is the fan spin (pretty fast actually), but nothing else happens.
When I remove the card the iBook starts up normally.
Any thoughts what could be wrong? Bad card? Bad connection?
Thanks a lot

Sven, Welcome to the discussion area!
Are you certain that you have an AirPort Extreme card?
Are you certain that it is an iBook G4? The iBook G3s require the original AirPort card.
If both of those are OK, then one (or more) of these is true:
The card isn't installed correctly.
The AirPort Extreme card is defective.
The iBook's motherboard is defective.

Power Mac G5 won't start up after a security update, please help!!!

Hi all,
My Power Mac G5 version 10.4.11 keeps showing a black video, no beep, no start up chim, this occured after updating a security patch 2008-7 from Apple website, asked to reboot then I encountered this mess.
The powerlight is turn on with solid white color. My display also has its powerlight turn on with solid white. But not nothing happens, except the fan noise becomes gradually louder and louder. I wait for hours ... but ...
My system just won't start up. Although I tried to reset the SMU, reseated RAM...
I tried also to re-install the OS by CD but it's impossible to insert it to the DVD tray.
Any help is greatly appreciated, thank you for your time.
Sgmed.

Hi BDAqua,
After weeks of strugle I can use my MAC as normal, but everytime I shut it down, she cannot wake-up, I had to refer to your hints in order to start it up again. So right now I can use my MAC every day with "SLEEP" mode.
She just cannot RE-START or wake up after a SHUTDOWN.
Any suggestion is greatly appreciated, here under I pasted the log file retrieved from Disk Utilities.
(I tried also to reset PMU, SMU and PRAM but nothing helped. Perhaps she is in need of a brand new PRAM battery???
Oct 26 23:54:04: Disk Utility started.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Preparing to secure free space : “Untitled”
Creating Temporary File
Securely erasing file
Creating Temporary File
Securely erasing file
Secure Erase Free Space stopped after 14 hours.
89.0% complete.
Erase complete.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
User differs on ./Users/Shared/SC Info, should be 0, owner is 501
Group differs on ./private/etc/authorization, should be 80, group is 0
The privileges have been verified or repaired on the selected volume
Permissions verification complete
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Owner and group corrected on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities
Permissions corrected on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
Owner and group corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
Permissions corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
User differs on ./Users/Shared/SC Info, should be 0, owner is 501
Owner and group corrected on ./Users/Shared/SC Info
Permissions corrected on ./Users/Shared/SC Info
Group differs on ./private/etc/authorization, should be 80, group is 0
Owner and group corrected on ./private/etc/authorization
Permissions corrected on ./private/etc/authorization
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.5 GB (237,882,122,240 Bytes)
Used : 11.2 GB (12,042,969,088 Bytes)
Number of Files : 298,349
Number of Folders : 76,969
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
70 %)
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Oct 27 20:59:00: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.6 GB (237,949,358,080 Bytes)
Used : 11.2 GB (11,975,733,248 Bytes)
Number of Files : 298,359
Number of Folders : 76,970
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Oct 28 00:31:37: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Oct 28 18:50:53: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 28 21:00:10: Disk Utility started.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Oct 29 19:55:10: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist, should be -rw-rw-r-- , they are -rw-r--r--
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player, should be -rwxrwxr-x , they are -rwxr-xr-x
Permissions differ on ./Library/Internet Plug-Ins/flashplayer.xpt, should be -rw-rw-r-- , they are -rw-r--r--
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist, should be -rw-rw-r-- , they are -rw-r--r--
Owner and group corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist
Permissions corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player, should be -rwxrwxr-x , they are -rwxr-xr-x
Owner and group corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player
Permissions corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player
Permissions differ on ./Library/Internet Plug-Ins/flashplayer.xpt, should be -rw-rw-r-- , they are -rw-r--r--
Owner and group corrected on ./Library/Internet Plug-Ins/flashplayer.xpt
Permissions corrected on ./Library/Internet Plug-Ins/flashplayer.xpt
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.6 GB (237,921,976,320 Bytes)
Used : 11.2 GB (12,003,115,008 Bytes)
Number of Files : 299,521
Number of Folders : 77,045
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Oct 29 20:22:20: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 30 17:14:49: Disk Utility started.
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,409,587,200 Bytes)
Used : 11.7 GB (12,515,504,128 Bytes)
Number of Files : 299,790
Number of Folders : 77,188
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 30 19:41:53: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 31 20:48:58: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,362,040,832 Bytes)
Used : 11.7 GB (12,563,050,496 Bytes)
Number of Files : 300,773
Number of Folders : 77,858
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Nov 3 15:48:08: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,411,020,800 Bytes)
Used : 11.7 GB (12,514,070,528 Bytes)
Number of Files : 300,976
Number of Folders : 77,880
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Nov 3 16:12:13: Disk Utility started.

G4 MDD won't start up after new memory and DVD drive Install

After watching an online video demonstration on how to add RAM and install a new DVD drive in a G4, I decided it was something I could do myself. It all seemed to go well, but after I put it back together and plugged it back in, the light comes on when I press on the power button, but the computer won't start up.
I'm running 10.4.? and I just installed an extra 512 MB RAM and a Samsung DVD+R in the lower drive slot. I also looked at some other posts/threads and decided to reset the PMU button. -No change after that.
I'm trying to get this computer in working order to pass onto my mom when I visit her next week.
Any suggestions?

I have had some of the same problems that you have experienced. I have a dual 1.25 g PowerMac w/ 2 g of ram, the Superdrive, and 4 separate drives. My main boot drive was a 160 GB WD Caviar. I also had a 160 Maxtor and (2) 120 GB WD caviares (the 120s were raided for video. The 160 WD started giving me some problems so I decided to replace it with a 500 GB WD Caviar Blue. I installed it in the machine and initialized it. I left the jumper on the drive in the cable select position. I tried to backup using Carbon Cloner and kept getting and error on one file. I re-initialed the drive to make sure it was wiped clean. I then started to back up the old drive file by file. I kept getting messages saying the drive was full. THat wasn't true as there wasn't anything on it. After several attempts to move files, I decided to put the machine back together without the new drive.
Now the real fun begins. I had trouble with the machine booting. I zapped the PRAM and did everything I could think of to get it to boot. It wouldn't so I figured it was something I did. I let the machine sit for a day or two to give me some time to calm down. I read some articles in this support section as well as some articles on several sites I could find. The machine would not only not boot but it would not even beep. I opened the machine up and tried to clean out some of the dust in it. hen I removed the battery and let it sit for a few hours. Then I held the PMMU button on the motherboard in for a long 5 seconds. I put the battery back and waited an hour or so. I tried to start the machine and got nothing. It doesn't beep but the monitor lights up as it thinks the machine is on. I've all but given up on the machine.
Now I know this is long but I have another problem. I took out the 160 GB WD boot drive and used one of the external devices called an Ultradock v4 to connect the drive to my G4 Powerbook. I used Carbon Copy Cloner to back my 160 WD boot Drive to an external 750 gb Maxtor drive that is partitioned into 3 drives. I backed up the 160 WD Boot drive to it. I didn't pay attention to how much space was used on one of the partitions. I then backed up the Maxtor to the 500 gb WD Caviar Blue. The original WD 160 gb drive took up about 197 gb on the Maxtor which in turn took about the same space on the new WD 500 gb Caviar blue. I am at a loss as to why more space is taken up by backing up from a 160 gb drive to a roughly 225 gb partition when it was less than 160 used originally.
Any ideas?

Won't start up after re-setting password

Similar Messages

Maybe you are looking for