Won't wake from sleep after listening to audiobook

If my ipod goes to sleep after I've been listening to an audiobook, I can't wake it again, and have to restart it. It always works again fine after I restart it, until it goes to sleep again. I only have this problem if I've played an audiobook since the last time I restarted, even if I then played music tracks after the audiobook. If I restart it and only listen to music, it will wake up just fine every time. As far as I can tell from playing around with it, this only happens if it goes to sleep on it's own, not if I put it to sleep. Everything else works just fine, but it's really annoying to have to restart everytime I let it sleep during a book! Also, if I have to restart it, when I go back to my audiobook it will no longer remember the track position. But if I go play some music, let it go to sleep, wake it up, and then go back to the audiobook, it will remember the position again! I am totally stumped on this, I have never had anything this weird happen with my ipod, and I've had it for around 2 1/2 years. I have the latest version of iTunes and the lastest version of the ipod software.
iPod with click wheel
iBook G4 Mac OS X (10.4.9)

Mike Doolin wrote:
I think I may have found the fix for this. My MacBook Pro was dying in its sleep every time (after installing Snow Leopard), whether it went to sleep automatically or I used a Hot Corner. I went into System Preferences>Desktop & Screen Saver and changed the screen saver to Flurry, and it works now. I had had it set to a folder containing a single .pct file that I had created.
Good advice Mike! When in doubt check the ScreenSaver settings.
Definitely seems that it has a problem with that pic... In my case, selecting any images instead of the default setting (no screensaver) seems to have cured my non waking issue on my early Macbook Pro in Snow Leopard.
My original problem was that no amount of trackpad input woke it, but the space bar did. The space bar seemed to wake it up with the previous Screen Saver setting. Now trackpad wakes it up (even from total sleep as well as screen saver), too. Might be nice to know about if this is an intended 'feature' as a security trick. Otherwise I consider this a bug.
My vote is that it's a bug.

Similar Messages

My elderly iMac (about six years old) won't wake from sleep after an electrical failure today, and starts up with a black screen.

This Intel iMac is about six years old, has had the motherboard replaced by Apple. Today we had an electrical failure, and it was asleep at the time. It refused to wake from sleep, and it seems to start up, but the screen stays black. I tried zapping the PRAM, shutting it down and turning off the surge protector, etc. . . and still, nothing. Any thoughts?

If http://support.apple.com/kb/HT3964 Intel-based Macs: Resetting the System Management Controller (SMC) does not work and you are comfortable working in the Terminal, try the following:
Enter into the Terminal the following: sudo pmset autopoweroff 0 and sudo pmset standby 0
If you like the hibernation, you can switch it back on by re-entering the commands with 1's instead of 0's. You can even change the amount of time by adjusting "autopoweroffdelay" and "standbydelay".

TS3824 My iMac won't wake from sleep after installing the most recent OS update.

I'm having trouble with my iMac, the screen won't wake up after it goes to sleep. The one time it did the screen was all fuzzy and pink. This has only happened in the last few hours after installing the latest OS X Lion update. Is this normal? Can someone help?

Hello, not normal.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitiion & use Disk Utility from there to Repair the Disk, then Permissions.
Re-install if that doesn't work.

Mac book pro won't wake from sleep after Yosemite update

Since updating my laptop to Yosemite my MacBook hasnt woken from sleep
i can hear it turn on but the screen and keyboard don't light up
mac book is only 3 years old retina display

Mike Doolin wrote:
I think I may have found the fix for this. My MacBook Pro was dying in its sleep every time (after installing Snow Leopard), whether it went to sleep automatically or I used a Hot Corner. I went into System Preferences>Desktop & Screen Saver and changed the screen saver to Flurry, and it works now. I had had it set to a folder containing a single .pct file that I had created.
Good advice Mike! When in doubt check the ScreenSaver settings.
Definitely seems that it has a problem with that pic... In my case, selecting any images instead of the default setting (no screensaver) seems to have cured my non waking issue on my early Macbook Pro in Snow Leopard.
My original problem was that no amount of trackpad input woke it, but the space bar did. The space bar seemed to wake it up with the previous Screen Saver setting. Now trackpad wakes it up (even from total sleep as well as screen saver), too. Might be nice to know about if this is an intended 'feature' as a security trick. Otherwise I consider this a bug.
My vote is that it's a bug.

MacBook Pro won't wake from sleep after installing Snow Leopard

If my MacBook Pro is running while closed with an external display and I unplug it from the display it goes to sleep - as indicated by the white light and the front pulsing. If I then open the MacBook the display remains blank and it is completely unresponsive to any keys or track pad input.
The only thing it responds to at that point is holding the power button down until it powers down and then restarting - loosing all work in progress at that point.
Before installing Snow Leopard the Mac would wake reliably when opened from this state.

Mike Doolin wrote:
I think I may have found the fix for this. My MacBook Pro was dying in its sleep every time (after installing Snow Leopard), whether it went to sleep automatically or I used a Hot Corner. I went into System Preferences>Desktop & Screen Saver and changed the screen saver to Flurry, and it works now. I had had it set to a folder containing a single .pct file that I had created.
Good advice Mike! When in doubt check the ScreenSaver settings.
Definitely seems that it has a problem with that pic... In my case, selecting any images instead of the default setting (no screensaver) seems to have cured my non waking issue on my early Macbook Pro in Snow Leopard.
My original problem was that no amount of trackpad input woke it, but the space bar did. The space bar seemed to wake it up with the previous Screen Saver setting. Now trackpad wakes it up (even from total sleep as well as screen saver), too. Might be nice to know about if this is an intended 'feature' as a security trick. Otherwise I consider this a bug.
My vote is that it's a bug.

IMac won't boot if Firewire device is turned on/won't wake from sleep

I am sometimes having an issue where my iMac won't wake from sleep; after I restart the iMac wont reboot (grey screen) until I power off the LaCie 300GB Firewire drive. I just bought this iMac a couple of weeks ago but the Lacie was on a PPC G5 Tower before and always was OK. I have no other Firewire devices to test the port with so my resources are limited. Anyone heard of anything like this ?
Message was edited by: appleboyperry

I noticed there is a firmware updater for LaCie drives. I don't know if it applies to your product, but here it is
http://www.lacie.com/support/drivers/driver.htm?id=10053
Please note what it says about backing up data on the drive before applying, just in case.

Won't Wake From Sleep

I held off from posting this until I'd scoured the boards looking for ideas, but I'm totally out.
Every since I updated to 10.4.8, my MacBook Pro won't wake from sleep. I've tried resetting the SMU and PRAM, enabled and disabled bluetooth device wake from sleep, and installed the latest EFI Firmware update that was just released. I've now narrowed it down to the 10.4.8 and a change in how it handles Expresscards. If I have my NitroAV FW 800 card plugged in during a session, it seems to prevent the MacBook from going to sleep properly. According to various Console messages, the PCI device prevents the computer from going to sleep, and /or places the computer into System Doze instead, from which it won't wake. The sleep light stays fixed and steady, only disappearing if I press the power button (it only reacts to the power button). From there the screen remains dark and all plugged in device fail to respond. I can hear the drive spin back up.
It reacts the same whether or not I eject the card before putting the computer to sleep. This behavior was not present before installing 10.4.8 and having fallen back on a back up of my 10.4.7 install, can say it's not present in the older OS version. I was hoping last night's EFI firmware update would deal with this, but after having installed it and 10.4.8 anew, I'm having the same old results.
If anyone has any new ideas or can direct me toward how I can make sure the folks at Apple see this, I'd greatly appreciate it.
MacBook Pro 2.16 Ghz Core Duo Mac OS X (10.4.8) 2 GB Ram, 7200 rpm HD, NitroAV ExpressCard FW 800

This is a typical console output for these incidents:
Nov 2 04:32:04 marlon-rubios-computer kernel[0]: PCI sleep prevented by AppleFWOHCI (5)
Nov 2 04:32:04 marlon-rubios-computer kernel[0]: PCI sleep prevented by PXS3 (1)
Nov 2 04:32:04 marlon-rubios-computer kernel[0]: hibernate image path: /var/vm/sleepimage
Nov 2 04:32:04 marlon-rubios-computer kernel[0]: sizeof(IOHibernateImageHeader) == 512
Nov 2 04:32:04 marlon-rubios-computer kernel[0]: Opened file /var/vm/sleepimage, size 2147483648, partition base 0xc805000, maxio 400000
Nov 2 04:32:04 marlon-rubios-computer kernel[0]: hibernate image major 14, minor 2, blocksize 512, pollers 3
Nov 2 04:32:04 marlon-rubios-computer kernel[0]: hibernateallocpages flags 00000000, gobbling 0 pages
Nov 2 04:32:08 marlon-rubios-computer kernel[0]: IOBluetoothHCIController::terminateWL .. done
Nov 2 04:32:08 marlon-rubios-computer kernel[0]: System Doze
After that, nothing until I force a restart.

Since upgrading to version 10.8.2 my MacBook Pro won't wake from sleep is her anyway I can fix this?

Since upgrading to version 10.8.2 my MacBook Pro (late 2009) won't wake from sleep is her anyway I can fix this?

> during the entirety of this process the cursor was a "busy" pinwheel/beach ball/whathaveyou for a solid 30 minutes before I turned the computer off with the power button.
All that cursor means is that it is busy trying to do something. You can see if force quitting solves the problem with a simple force quit using command-option-escape. If you are having issues with iCal quitting, sometimes it doesn't always know whether or not it is properly communicating with a particular calendar. This can be a Mobileme issue, or even a phone synchronization issue, or a network issue reaching a shared calendar. Shutting down a machine directly from a cursor is the last step one should try, only after all others have failed. If you have done this in the past, lurking corruption can get worse each time with the directory, and upgrading the system will only enhance any corruption already present. When you restart your Mac, does everything appear to be normal?

Macbook won't wake from sleep

My macbook won't wake from sleep. I have to power down and restart. I have also noticed that when it is asleep, the sleep indicator light doesn't pulse, it just stays on steady. Could this be a bug in mavericks? I have a Seagate external hard drive that I use for my Time Machine backups that it always connected. But ejecting it before the macbook goes to sleep doesn't seem to solve the problem.
Any advice would be appreciated.

You can access System Logs and other information on the computer's status in Console utility; where there are endless lists of all the processes ongoing in the Mac OS X. There are specific log-out and other automatic items the system will post to such logs.
•OS X: When your Mac doesn't sleep or wake
http://support.apple.com/kb/TS5357
Such articles are helpful in so much as they also have additional links.
Perhaps the computer is not going to sleep. The system logs can tell this.
Regarding power management, sleep, and other activities, have you read through the article about the System Management Controller to see if any of the items listed there can help? They'd take time to go through the list. And the end item is a reset of the SMC, after reading through and troubleshooting from the list.
•Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
A good idea is to make a backup of your content in the computer, to an external hard disk drive, so when or if you end up totally erasing the hard disk drive (to include secure erase one-pass overwrite) and reformat GUID, that an all new system could be installed on there, in part of a larger troubleshooting effort.
Actually, if you have an externally enclosed hard disk drive with its own power supply, (not port power) and then use Carbon Copy Cloner (see Bombich software) to make a bootable clone of your entire system to a large enough external drive capable of booting in OS X, then you could get to the bottom of this issue. While keeping a boot copy of what you already have, because you can run the computer from an external clone.
•Mac Backup - Carbon Copy Cloner:
http://bombich.com/
A good source for external drives that can handle clones
is macsales; or a place to look to compare real details.
The problem could be based in software, or in hardware. Troubleshooting against either possibility is how to resolve this problem. Some models of earlier MacBook & other intel-based Macs do not really like Mavericks; or perhaps like it less than an earlier system it may have shipped with. The earliest like Snow Leopard best.
Anyway, there is a solution but it won't be a one-liner.
I've done some 40 hour days, troubleshooting issues.
Worst problem for me was buying one w/Applecare.
Good luck & happy computing!

Macbook won't wake from sleep - replaced logic board and batteries already

I have a 13" White Macbook on 10.5.5 that occasionally won't wake from sleep. This will happen with nothing plugged into the Macbook except for the AC adapter. I have done the firmware upgrade, reset the SMC, reinstalled Leopard from the DVDs twice, brought it into Genius and had the ram, sleep switch, and the logic board replaced. There are no bluetooth devices attached to the computer.
I've searched the forums but haven't found a definitive answer yet.
Message was edited by: multiphrenic

I've experienced the problem as well. I have the new aluminum macbook with all factory specs and no mods, except that I changed it from smart sleep to the original old mac behavior of instant sleep. It is intermittant and with mine, I've noticed that when the screen is open, the computer appears to be completely off, but when I close the computer the light on the front of the computer comes on. The only resolution I've found so far is to hold the power button for 5 seconds for a hard power down and then push it again--everything works fine.
There is indeed a sudden drop sensor, and in fact, it did happen after I accidentally hit the corner of my mac once on a tv while trying to set it down. That could be the answer...we might have to try disabling that because quite honestly, if I drop my mac while its on, I'm going to be more worried about the screen, the case, even the cute little plastic apple than the hard drive (I have backups galore).

Macbook Pro 13" won't wake from sleep

Have mid 2009 Macbook Pro 13" that repeatedly won't wake from sleep. Either putting to sleep via lid closure or sleep command, seems to enter sleep OK. Sleep light slowly flashes indicating sleep. When I open lid, light goes out but screen doesn't come on. I have hold power button down to force it off and reboot. Very annoying. Occasionally, the laptop is warm and you can hear the fan running.
I have taken to Genius Bar twice to no avail. They could duplicate the problem the first time I had it in and ran some type of software repair. Didn't permanently fix issue. Second trip they tech thought it might be one of the two internal sleep switches. She ordered them but when they ran diagonsics on those switches, the said they were good and didn't replace or repair anything.
I have replaced both HDD and RAM and reinstalled 10.8 but problem continues. Any suggestions?

Not sure if this will help--but my MacBook was having similar problems. It would fall asleep and then when I would try to wake the computer, the screen would stay black but the computer was running.
Here is what I tried:
Turn of your mac
Press the power on button
Immediately after you press the power on button: hold down the following 4 keys:
Command + Option + P + R. Continue to hold them down until you hear your mac make the power on sound twice. Once you hear it twice, let go of all keys.
This should re-set the sleep settings. Worked for my computer, I hope it works for you if you haven't already tried it.

Macbook Pro with Leopard Won't Wake from Sleep

I'm intermittently, but with increased frequency finding my MBP won't wake from sleep. A copy of my log is below. I've snipped out where the log repeats. A common message is the "unknown SIGSEGV code 0". Any ideas what the issue is? How can I go about diagnosing?
9/1/10 2:40:11 PM [0x0-0x1a01a].com.adobe.flash-10.0[269] got type name: Object
9/1/10 2:40:11 PM [0x0-0x1a01a].com.adobe.flash-10.0[269] got type name: Object
9/1/10 2:40:11 PM [0x0-0x1a01a].com.adobe.flash-10.0[269] got type name: Object
9/1/10 2:40:11 PM [0x0-0x1a01a].com.adobe.flash-10.0[269] function findRecords(table:Object,findField:Object,findValue:Object,)
9/1/10 2:40:12 PM [0x0-0x1a01a].com.adobe.flash-10.0[269] CFlashPlayerMDIFrame::LoadFrame
9/1/10 2:40:24 PM kernel unknown SIGSEGV code 0
<SNIP>
9/1/10 3:14:24 PM kernel unknown SIGSEGV code 0
9/1/10 3:14:34 PM Safari[165] * _NSAutoreleaseNoPool(): Object 0x1acad280 of class NSCFString autoreleased with no pool in place - just leaking
Stack: (0x96632f4f 0x9653f432 0x9654d038 0x2d112ea2 0x2d02a511 0x2d04383d 0x2d04386b 0x968a3155 0x968a3012)
<SNIP>
9/1/10 3:14:34 PM Safari[165] * _NSAutoreleaseNoPool(): Object 0x1919b1f0 of class NSCFString autoreleased with no pool in place - just leaking
Stack: (0x96632f4f 0x9653f432 0x966c30c2 0x2d001a20 0x2d027e67 0x2d02a525 0x2d04383d 0x2d04386b 0x968a3155 0x968a3012)
9/1/10 3:14:44 PM kernel unknown SIGSEGV code 0
<SNIP>
9/2/10 5:06:22 AM kernel npvhash=4095
9/2/10 5:06:17 AM com.apple.launchctl.System[2] kern.ipc.maxsockbuf: 8388608 -> 512000

Hi David,
- Have you tried any troubleshooting steps?
You may try the following steps:
1. Reset SMC as per the following article http://support.apple.com/kb/HT3964?viewlocale=en_US. If this does not resolve the issue then go to step 2.
2. Navigate to Macintosh HD/Library/Preferences/System Configuration and remove a file called powermanagement.plist (drag it to trash, might prompt for a password). Restart the mac thereafter. If this does not resolve the issue, boot to safe mode as per http://support.apple.com/kb/ht1455 and check the issue there. If it works there, you will have to remove the following files to check Macintosh HD/Library/StartupItems, HD/Library/Caches and then restart the mac.
Let me know if this works.

TS4080 apple thunderbolt display image on display intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys. Rebooting by pressing the power button resolves issue.

My apple thunderbolt display (which I purchased 1.5 years ago; OS 10.7.5 Mac Mini) intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys, so am thinking it is a hardware problem with the display. Rebooting by pressing the power button turns the screen back on, but the same phenomenon has occurred several times. Could this be a software issue, or do I need to have my display repaired? Your feedback would be appreciated.

Hi ED, tough to tell, but it does sound like it's waking with the bonk, just not displaying.
Long shot but...
I wonder if it's a variation of this, of which I've seen many different symptoms...
Resolution
Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
Additional Information
This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
1. Open System Preferences > Security & Privacy > General. Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
2. Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
http://support.apple.com/kb/TS4135?viewlocale=en_US

OSX 8.2 new Retina Macbook Pro won't wake from sleep.

Since upgrade to OSX 8.2 new Retina Macbook Pro won't wake from sleep. Tablet lights are on in morning and fans running like crazy, but it requires hard quit and start. Tried with no apps running, no change. It was fine before this last update. Wasn't the recent firmware update supposed to fix this issue? It seems to have started one for me.

I have the exact same problem with my Macbook Pro OS 10.8.4. What happens is: I work on the train, press cmd/alt + eject to put to sleep..pop it in my bag...get home or office... open the lid...and nothing! Battery indicator shows I have plenty of juice but it will not wake up no matter what key I press.
The only difference between use on the train and home/office is the plugging in of peripherals and mains power. It happens sparadicially, perhaps once or twice a week and I always send a 'panic report', so somewhere there will be approx 20 reports of this fault at Apple.

Compter won't wake from sleep mode

My Pavilion 17 notebook computer, purchased in Oct. '13, won't wake from sleep mode; I must shut down and reboot each time. I know this is not due to Windows 8, as I have another Win 8 computer that works normally.

I've done some more experimentation and found a workaround. I had Sleep and the Screensaver both set to Never, and by activating the Screensaver the wake up issue has gone away. This doesn't change the fact that there is an issue with my ATV sleeping when it shouldn't and failing to wake up, but having the screensaver active stops it sleeping in the first place I guess.
It's slightly annoying because I like to have music playing with the description and album art running, and this disappears when the screensaver comes on, but it is better than unplugging the thing every time I use it. Hopefully this will be fixed in the next update, because it only appeared in the last one.

Won't wake from sleep after listening to audiobook

Similar Messages

Maybe you are looking for