Wondershare-is it a good product line?

Has anyone had a problem with Wondershare products? Are they the same as iskysoft?

Thanks. I was told that Wondershare and iskysoft are exactly the same products, sold by the same company. Do you know if this is true?

Similar Messages

Understanding the Router product line

I'm in the process of doing a comparison between the newer 2800 (2811 to be exact) vs. a 3725. I am finding (or atleast it appears) that it is apples to oranges. I noticed that I can find things like "packets per second" for the 3725, but the 2800 series talks about lots of slots and abilities for things like VoIP. Can someone help me to understand the difference between what they are calling an Access Router (3725 etc) and a Multi-Service Router (2800 etc..)? I consult for a wireless ISP and which has currently a 45Mbps 802.11A backbone. Right now is is a switched backbone with 2611XM's doing InterVLAN routing. We are moving to a routed network and feel we need to upgrade the routers.
Thanks

Have you looked at the Cisco Product Quick Reference Guide (QRG)? The QRG is a good place to start for comparison of the various products and product lines. See http://www.cisco.com/warp/public/752/qrg/ for access.
Generally the 2811 would be good for a T-1 or two on the WAN side and the 3725 can accommodate higher speed WAN interfaces along with higher density port cards.
The 3725 will generally have more CPU horsepower but the AIM modules available on the 2800 series may offset that advantage depnding on what services you see your environment needing to use.
The 3700 series is also more expandable via a wider selection of interface cards.
Hope this helps - please rate the post if it does.

Production lines in REM

For planning in REM we use MF50 with the selection of a production line.
We have a material X and a material Z. Material X is a component of Z.
The rate routing for X has the WC (operations) A and B. The rate
routing for Z has the WC (operations) B and C. The WC B is shared.
What is the correct assignment for the planning line with LDB1? Is it
better for the planning results to have one line with WC A, B and C
assigned? Or is it better to have two seperate lines with A and B, B
and C?
Thanks for your answer.

Thanks for all your replies. But my question has been not answered.
I created a WC with category 007. In line design (LDB1) I asigned to this WC (007) the WC (001) used in the rate routings. If I assigned more than one WC to the line the takt rate of the line is increasing.
My question is now how I have to assign correct the WC (001) to the line?
The line consists of WC A, B and C.
The semifinished good X is produced on WC A and B. The finished good Z is produced on WC B and C.
Need I now one Line with A + B + C for both materials?
Or should I create a Line 1 with A + B for the SFG X, and Line 2 with B + C for the FG Z?

Methods to construct a production line inspection system using labview

i hav to construct a production line inspection system. i need to compare an image acquired with a default image. how can i do this using labview? thanks

Hello.
There are several products that you would need to consider in order to perform this application:
Products and Services: Machine Vision
Basically, with an IMAQ device and our Vision processing and analysis libraries, you could acquire images and perform a subtraction between your default image and the acquired one, and then make decisions based on the result. Feel free to contact our Inside Sales folks for any details on setup that you may need.
If you already have the IMAQ and Vision products, there are several good VIs for this type of application that can be found in the Vision&#187Image Processing&#187Operators palette.
Regards,
Colin C.
Applications Engine
ering
Colin Christofferson
Community Web Marketing
Blog

Post advertising costs as per product lines

i need to capture cost and revenue as per the product lines(divisions in sd) for tangilble and intangible goods, if i add more profit centers based on product lines then i need to create at least 96 more profit centers.
is there a possibility to generate a report through sd for product line wise report where the cost of goods sold and revenues can b captured product line wise ?

Hi,
I don't think you can get such a report out of standard SAP SD module. What does a Product line represent in SD? A sales area? As you know, Revenue is stored PR00 (usually) conditon type and COGS is stored in VPRS condition type, you could consider creating a custom ABAP report to get margin report based on Product line using these details (table VBAP, KONP etc.,).
Othewise, if CO-PA is an option which you could explore, then suggest CO-PA, for a more flexible/granular reporting.
But, I did not understand the relevance of your thread subject 'post advertising costs as per product lines' with your post. So, as per you, is 'Advertising cost' and COGS are same?
Hope this helps.

How about some more samsung products in the auctions ? I really don't want to bid on those crappy ipads. How about a better mix of product lines or at least some of your "new" digital coupons geared towards Samsung products????

How about some more Samsung products in the auctions ? I really don't want to bid on those crappy ipads.
How about a better mix of product lines or at least some of your "new" digital coupons geared towards Samsung products????

How about some more Samsung products in the auctions ? I really don't want to bid on those crappy ipads.
How about a better mix of product lines or at least some of your "new" digital coupons geared towards Samsung products????

Error while giving the production line in repetitive mfg

Hello friends,
   When i am maintaining the production version in material master for repetitive mfg, and in production line when i am giving the workcenter which is in operation of rate routing, system giving me the error message that "REP01(which is my workcenter) is not maintained in plan (planning type = plant = smp1)".Message no. is CFVO90.
      Though i have got the solution of this message, but i am not able to understand the solution.
      Actually while creating the production version in material master, for task list data i was only maintaining the task list type, Group Number and Group counter for Rate Based only as Rate Routing.And when i would give the workcenter which is in operation of rate routing then system would give me the error.
       Later on when i maintained the Task list type, Group Number and Group counter for Detailed scheduling, Rate Routing, and Rough cut scheduling and than maintained the workcenter in production line,system didn't give the error.
      My question is as we are doing the repetitive mfg, and as we have maintained the rate routing, so why it so that in Detailed scheduling and rough cut scheduling also we have to maintain the Task list type, Group Number and Group counter.
     Plz guide.

Hello pravin,
Thanks for the reply.
Actually if i give the details of Task list type, Group, Group counter for Rate based scheduling only in production version and if i maintain the workcenter which i have given in the operation of Rate Rounting in production line then system is throwing the error mentioned above.
    Unless and until i mention the details of Rate Routing for all i.e. Detailed scheduling, Rough cut scheduling and Rate based scheduling, system is not allowing me to save the production version.
       As per your answer, even i am confused that as i have ticked the repetitive mfg in mrp 4 view and as i have given REM profile, so system should not give me the error when i only maintain the rate routing data in Rate based scheduling in production version.
      Is there any other way to solve this error.If not than whats the logic behind it.
           I hope u have understood my query.

Analog to Digital Converter-- What's A Good Product For My System?

What would be a good analog to digital converter for Final Cut Express HD 3.5 on a Mac OSX 10.4 system? I've used a Canopus on a MacPro with Final Cut Pro before and liked it, but wasn't sure what would be a good product for my macbook. I've looked at the Canopus advc-110 and 55 but am not clear on the difference and if it would work with what I have.

The ADVC-55 is capture only. It includes composite & s-video inputs and stereo audio inputs. Firewire output.
The ADVC-110 is bidirectional (meaning you can both capture and output through it - this is a very good way to monitor your video during production as you can see the actual quality on a monitor/TV rather than just your computer screen, which has limited capability to show you the actual video quality.) It includes composite & s-video inputs and outputs; stereo audio inputs & outputs; Firewire input & output.
The ADVC-300 is also bidirectional and includes composite, s-video and component video i/o (D1 connector) inputs & outputs; stereo audio inputs & outputs; Firewire input & output; and software that enables you to tweak its video settings. Helpful in cleaning up particularly bad analog videos.
I've used these things for years and they all work great. I do not believe there is any difference in the internal conversion hardware ... The primary differences are support for one-way vs. bidirectional conversion; input/output connectors; and the software that comes with the ADVC-300.
If you have basically clean analog video, any of these units will be fine. You can use any analog source (VHS deck, camcorder, DVD player, etc.) and would typically use iMovie or Final Cut Express to capture your video on a Mac.

What is a good product to connect laptop to the tv

I'm looking for a wireless way to connect my laptop to my tv anyone know of a good product

I work for a very large MSO (cable company) and would recommend going with the Motorola 6121 from Best Buy.
This modem is extremely reliable and is a workhorse in the cable world. While all modems would work fine, I have noticed the 6121 continually outperforms every other modem (Arris, Ubee, SMC) that I work with daily, both on maintaining bandwidth in areas with poor signal and at recovery from outages. The other good news is being Docsis 3, it is somewhat future resistant, meaning the next 5-7 years of speed increases, you should be compatible. Also, it has a gigabit ethernet port, which matches the highest output of your Airport Express.

INVENTORY by Product Line

Hi All,
do we have any report for Review reporting by Profit Center (COGS & Inventory by Product Line)
I know I asked this question previously, and friends said I can use FAGLB03 or FS10N , using Profit center as the sort criteria, BUT I need to see inventory by Profit center i mean to say QTY, and actula valuated price at the level of Product line, NOT the inventory G/L account .
as the business users says we have field in Material maser for Profit center why can't we see the inventory by Profit center.
Thank you ,
Paarthu

so you mean to say,
mixing MBEW and MARC tables with MB5L
will give the material-qty-valuated stock-Profit center
Is that what you are trying to say ?
I tried MBEW and MARC downloaded to excel,is that the right way to do ?
or do we need to run a query in SQ01 , by giving all 2 tables and fieds?
let me know,
Paarthu

Sending material back to production line

Hi all,
Can I send a material back to production line once the GR is done after production,UD is taken(inspection type 04 active) and the material is now in unrestricted stock.

Sherya,
I hope you are working on REM process of SAP -PP, in transaction MFBF you can click the "Neutral Reversal", now the quantity field would be with negative quantity, enter the required reversal quantity and then perform the backflush.
Once the above is done, you can again perform Backflush using MFBF for the new Serial number.
If you are'nt working on REM, then you can use transaction MB31 movement type 102 for reversing.
You cannot reverse the Backflush document or Material document using MBST, since QM is active and UD is over, but certainly you would be allowed on the above process suggested by me.
Regards,
Prasobh

Can someone tell me if this is a good product for the mini?

Go to this website (you have to copy/paste into your web browser):
http://cgi.ebay.com/Apple-MAC-mini-80GB-HD-Backup-Firewire-USB2-0-HUB_W0QQitemZ5 808009357QQcategoryZ80044QQtcZphotoQQcmdZViewItem
it's an external 80 GB hard drive for the mini, and the mini sits on top of it perfectly. do you think this would be a good product to buy if i get a mac mini with only a 40 BG hard drive? thanks and please reply! i'll appreciate it a lot! i promise i will!

Sounds fine to me. However - the price is rather high. Pricegrabber shows the same product for $125-140 along with lower shipping rates.
http://www.pricegrabber.com/search_getprod.php?masterid=10581450&search=acomdatamini+pal80
The 160 GB and 250 GB versions can be had for about the same as this eBay seller wants for a 80 GB version.
http://www.pricegrabber.com/p_AcomData_160GB_Mini_Pal_Combo_HDD,_10581451/search=acomdataminipal
http://www.pricegrabber.com/p_AcomData_250GB_Mini_Pal_HDD_MAC_Mini,_10581452/search=acomdataminipal
CompUSA has the 160 GB version for $199.
http://www.compusa.com/products/productinfo.asp?productcode=329165

I have 4 sets of slides for 4 product lines. I want thave a slide that lists the 4 products, click on which one I wnat and have it go to that set of slides. Is this possible?

I have 4 sets of slides for 4 product lines. I want thave a slide that lists the 4 products, click on which one I wnat and have it go to that set of slides. Is this possible?

Yes, use hyperlinks.

Return vendor rejection from production line

Hi,
Guru,
How to return vendor rejection from production line and it should be vendor wise.
regards,
rakesh patel

Hi..
To achieve this requirement there are some developments are required.
e.g.:- One different movement type should be there for handling vendor rejection from production line to transit store.
One different transit store should be there for handling the rejections.
And you must know that particular material has come from which vendor e.g. 10nos are from xyz vendor and 7 nos from abc vendor.
Now you can do the transfer posting thru MIGO from production line to transit store. and can select supplier from partner tab.
Different movement type and storage location would be very helpful for reporting part. And maintain discipline.
Regards
Vivek.

Change over time on production line.

Hi Experts,
We have a scenario where we need to schedule the orders also considering the changeover times on a production line from one product to another. Suppose I am producing product A on the line and my next product is B, say the change over time is 10 mins. But suppose if I am changing from product C to product B, then the changeover time is 15 mins. Similarly it is different from one product to other based on what will be produced on the line next.
Like,
A---->B is 10mins
C----->B is 15 mins
D----->C is 30 mins and so on.
A big matrix exists for the same.
Is there any way that I will be able to handle this in standard SAP? Ideas will be much appreciated.
Regards,
Sachin

Hi,
You need to maintain the Setup Group Key in the routing, and then in capacity levelling table you group orders by this key, and then there's a function to reduce/change setup time for each order and for the group.
Definition of Setup Group Key - transaction OP43
Definition of Setup Matrix - transaction OPDA. In here you define the "new" setup times that substitute the "old" setup times, and are setup group dependent.
In the routing opration detail in CA02 or CA01 choose the setup group key on the "general Data" part.
For the capacity levelling part, it is too complex to guide you here.
Regards,
Mario

Wondershare-is it a good product line?

Similar Messages

Maybe you are looking for