Wont charge after update to ISO 7

Why wont my Iphone 5 take any kind of chargers after update to ISO 7 HELP me !!!!

Your next step may be to make an appointment at your local apple store and have them check it out.
If the battery is totally dead, you may need to have it on a charger for at least half an hour before it shows any signs of life. But if there's something going on with your port then you can't do that. It may be time to bring in the pros and see if they can work anything out

Similar Messages

  • The Calendar on my 3gs wont work after updating to ISO 5. Help...

    Can anyone help. I have tried everything I know and have ever re-installed the phone but still nothing.
    The existing entries are in the Calendar but the + button is missing that allows you to add new entries.....?

    The same happened to me on my 4S.
    After doing a new restore, the "+" button came alive again.

  • Iphone 5 wont charge after updating IOS

    this *****, I lost factory charger, I know it has to do with the cheap one I have, what can i do

    There's always the buyback program for non-Apple chargers. You get an Apple charger for 10 bucks if you trade in a non-Apple charger.
    http://www.apple.com/support/usbadapter-takeback/

  • Appstore wont open after update ios 6.0

    appstore wont open after update ios 6.0. my imessages undelivered too. ps help

    yes i have connection. its solved already thanks to
    watanabe_apple
    This solved my questionRe: Install apps from AppStore after update ios6 is not working 
    Sep 25, 2012 9:26 AM (in response to pkruitz)
    1) Quit App Store in multi-tasking.
    •From the Home screen, click the Home button twice.
    •Tap and hold on the app.
    •When it starts to jiggle, tap the red in the top corner to close it;
    ***Please close all open apps on your phone***
    2) Tap Settings.
    3) Tap Safari.
    4) Tap Clear History.
    5) Tap the Clear History button.
    6) Tap Clear Cookies and Data.
    7) Tap the Clear Cookies and Data button

  • My itunes wont work after update

    my itunes wont work after update. whats the problem.

    also, the curser just goes round and round. cant close by clicking x, have to close frome the place that says close. then message says program not responding.

  • ITunes wont run after update today says missing file msvcr80.dll

    iTunes wont run after update today says missing file msvcr80.dll
    tried to reinstall, nothing changed.

    Check out the user tip below.
    https://discussions.apple.com/docs/DOC-6562

  • My ipad is locked and disabled after updating to iso 7.  I never had a password on it.

    my ipad is locked and disabled after updating to iso 7.  I never had a password on it.

    Even though you never had a passcode enabled, try the help here >  iOS: Forgotten passcode or device disabled after entering wrong passcode

  • Poor sound after updating to ISO 7

    Poor sound after updating to ISO 7. Before updating i had terrific sound both on my music and videos I recorded with my cam, i had to turn it down. Now, after update, i put volym on Max and can hardly hear the music or whatever. Anyone else with same problem?

    I also loved my iphone because it HAD great sound.  Since the update of the iso7 for my iphone 4s, i am missing my calls because I cannot hear the phone ringing.  The sound is so low even though I have it on the highest sound possible.  The is something in the update that caused this problem among others such as the phone blinking out while I am viewing videos.  Help Apple!  THe battery is going from 100 percent to 20 percent in two hours even when I have almost turned off everything on my iphone.  I need my sound back!  Apple please find out what happened in your update that caused the loss of the sound!

  • My iphone5c wont charge after its been water damaged but , its showing me the apple and showing that its dead/out of battery

    my iphone5c wont charge after its been water damaged but , its showing me the apple and showing that its dead/out of battery, WHY ?

    crisdeana31 wrote:
    my iphone5c wont charge after its been water damaged but , its showing me the apple and showing that its dead/out of battery, WHY ?
    Water damage is totally unpredictable. If it was salt water the phone is definitely dead. If it was not you MAY be able to recover it by putting it in a sealed plastic bag full of uncooked plain rice (not quick cooking or "converted") for at least a week without attempting to turn it on. Better yet, if you can get silica gel easily that works better than rice. If you have tried to turn it on it may be too late for this.

  • Adobe wont print after update 9

    Can't print after updating to Adobe reader 9. Using a B&W multi "old girl" Lanier 5235 and I tried uninstalling Adobe and reinstalling without help. I can print a PDF file via Preview and I csan print word files via word etc. etc using the diff. cases in the printer, but Adobe just wont print after update. Any good ideas from you guys?

    Quite sure its Snow Leopard that made it impossible for me to get to the diff. trays. And this link (http://support.apple.com/downloads/LanierPrinter_Drivers_for_Mac_OS_X_v106) is the only one that doesnt work . Furthermore I asked Lanier if they knew about it, but they didnt seem to have a clue... a bit funny I think... also frustrating though

  • Ipad 3 won't charge after updating to ios 6. even with apple charger

    ipad 3 won't charge after updating to IOS6. even with apple charger. just say "not charging" next to the battery symbol

    Hi,
    I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
    Will monitor it and if no joy will go to a apple store
    Thanks

  • Anyone has any problem after updating to iSO 4.3.1 ?

    anyone has any problem after updating to iSO 4.3.1 ?
    I would like to know before updating mine.

    My 3G kept freezing after iSO 4.2.. and after reading the forums I updated both my Itunes and software to iOS 4.3.1, now I've lost my notes, contacts, calender entries and so far in the last ten minutes it's turned off and restarted itself and sync'd continually about 5 times.
    So basically I'm still where I was before only more cranky. In addition, I live in Australia and there are no Genius places here, there is no support from Apple unless you pay for it even by an email, you basically end up fending for yourself under a supposed warranty that isn't worth the paper its printed on.
    It you haven't already guessed, I'm more than a little ****** off.
    If I'd known how much trouble this was going to be, I don't think I would have spent the $400 odd dollars to buy it.
    If its not right by the weekend I'm taking it back to the shop I bought it.

  • My 4g not working after update to ISO 7`0`3

    the internet conection 4G not working After update to ISO 7-0-3 please what can i do to solv the poplem

    Hi there tarig azhari,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS3780
    -Griff W. 

  • My iphone wont charge its update prblm or not

    my iphone wont charge its update prblm or not..........

    How are you charging the device?  Are you using the Apple brand provided charger & cable?  Are you connecting it to a USB port on a computer or directly to a power outlet?  How long are you leaving the device to sit an charge?

  • Iphone4s battery drains while charging on updating to ISO 8.1

    phone4s battery drains while charging on updating to ISO 8.1
    RBV

    hi, i was trying to look for the "ENERGY MANAGER" but i couldn't find it. also i searched it by typing but it's not showing, do you thing it has been deleted when the 8.1 was installed? 
    rsanz wrote:
    Go into Lenovo Energy Manager > click on the menu button > Settings tab > turn OFF conservation mode.
    This setting is designed to help conserve the health of your battery if you tend to use your laptop while plugged in.  It's not good for the battery to be held at 100% for long periods of time, so instead this setting stops chargins when the battery reaches 60% to prevent battery damage.

Maybe you are looking for

  • Discoverer and Logical Standby

    We don't wish to run Discoverer against our production database. To that end, we have set up a logical standby on another db server. We plan to allow our users to run their Discoverer reports using the data from the standby database. Q: Does anyone h

  • My Fonts are not working

    Yesterday I reinstalled my CS5 on a new computer.  Now when I go to open a file I had from my last computer (Illustrator) I get an error message the "TallPaul" is no available and it automatically converts it to something else.  How do I get "TallPau

  • Records Management instance node for report

    Hello all! I'm trying to set up a record model in SCASEPS transaction to start GM_BUDGET_OVERVIEW via a report Instance Node. In the Instance Node attributes I've set CSELNAME PVERSION=0. Now I'm trying to fill in automatically the Grant number (whic

  • Purchase price history

    Hi, Client requirement is that he has to view or see all the price history of a particular PO prices provided by the vendor. For example actually a PO has been created with  a price of RS.180/- per piece. And later vendor has decreased the PO price t

  • How to establish communication between dynpro and Applet running in Portal

    Hello SDN, I have a problem with concept of my app and would be glad if You can help me.  -  I needed a graphics engine to draw a map during a dynpro runtime, and i made applet for it because dynpro don't offer suitable api. Map have to show some dat