Wont detect sd card after windows 8 upgrade

Hi
I need help. My HP Pavilion M7 1015dx wont read/detect any SD card after I upgraded to Windows 8.

What is the installed CPU?
Have you tried running the HP Support Assistant Tune-up utility?
Go into the Device Manager to see what the manufacturer of the External media card reader is.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

Skype does not recognize my headset after Windows 10 upgrade

Hi everyoneSkype stopped recognizing my headset after Windows 10 upgrade. I've tried the solution deactivating the "Allow applications to take exclusive control of this device" option. No success. The headset works on my other Windows 8.1 laptop and my Cellphone. Other applications, including Windows 10 microphone setup for speech recognition work. Here is something strange though. When I open up Skype audio tools and tap the microphone between thumb/finger Skype detects this and shows 4/5 green bars. Any ideas?
Voiceless in Vancouver

Your upgrade haven't changed the drivers properly.
1. Just go to Device Manager and delete the audio drivers.
2. Then restart your pc and switch on the internet.
3. Your drivers will be automatically installed by Windows Update.
** If your problem is solved then Mark this as Answer! **
** Please give Kudos If you want to Thank Me! **

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

Satellite A300D-15B - Webcam won't work after Windows 7 upgrade

My webcam doesnt work after Windows 7 upgrade. I have installed the drivers but still having no luck

Hi
The webcam is listed in device manager under the Imaging devices
There you should see USB Video Device.
If its not listed there, then I think that the device malfunctions or its disconnected.
The webcam is an usb device and its connected to USB controller.
I read in different threads that in some cases the cable could be loose and therefore the webcam would not be listed in device manager.
I such case the display lid needs to be disassembled and the cables should be checked.
In my opinion its a job for an technician.

No internet after windows 10 upgrade-Ralink RT3290wi-fi adapter

I have a Ralink RT3290wi-fi adapter . There is no internet after windows 10 upgrade. What i need to do or is there a driver for this adapter for windows 10. Please suggest Thanks Samrat

there are several posts about this on the microsoft forums about no internet after upgrading. here is one that migt help http://answers.microsoft.com/en-us/windows/forum/windows_10-networking/after-upgrading-from-windows-81-to-windows-10-no/42b1852e-4faa-47a2-85ca-dc8e190c7c27 here is another http://answers.microsoft.com/en-us/windows/forum/windows_10-networking/windows-10-network-adapter-problems/3e11b955-1e5f-43e0-8891-7fef24e693dd

Satellite C55-A5182 - Screen flickering after windows 10 upgrade.

Satellite C55-A5182: screen flickers after windows 10 upgrade....help!!!

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and I understand that you are having an issue with the Touchscreen on your HP Notebook - 15-ac020nr. You had mentioned that since your Windows 10 Upgrade, it no longer works. Have you tried doing all updates (Windows, HP Support Assistant, BIOS)?Have you tried restarting the Notebook a couple of times?Have you tried to run the Windows Troubleshooter? Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The HP Support Assistant will also help find a proper driver for you to use. Updated Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product. They will be released as they become available to HP. I did find a troubleshooting document for you called Touch Screen Issues. Although it does say it is for Windows 8, it will still work for Windows 10. Please follow the provided troubleshooting steps and re-post with the results. Have a great day!

Ideapad z400 touch after windows 10 upgrade

I am using the ideapad z400 touch and have been upgraded to windows 10. "Intel graphics card => I reinstalled the windows 8.1 driver from lenovo site", and my brightness problem is solved. I am facing the problem with the intel HD graphics 4000 display driver that I install from lenovo site. The driver seems like not fully compatible with windows 10. My screen will turn off after 5 minutes and when I move the mouse to wake it up I face the problem, the screen will freeze for a while and start to wake up and showed me the message "intel display driver.....has stopped responding and has recovered" This happens everytime after my screen turn off. Besides, my pc can't go to sleep mode. When I select sleep for my pc, the screen went black and it takes a long time to sleep but actually it is not, then it will shut down on its own. I have to press the power button to turn it on again. I think this problem is also related to the display driver. I have no problem with this display driver on windows 8.1. Will Lenovo come out the new driver that compatible with windows 10 from Lenovo site? The latest operating system they provide the drivers is untill windows 8.1. If they do not support the windows 10 driver I will roll back to windows 8.1 with no choice but I sincerely hope that I can keep using windows 10 on my pc I like it. Microsoft gives us one month time to roll back to windows 8.1. I don't know can I upgrade to windows 10 again if I found that Lenovo comes out their new drivers

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and I understand that you are having an issue with the Touchscreen on your HP Notebook - 15-ac020nr. You had mentioned that since your Windows 10 Upgrade, it no longer works. Have you tried doing all updates (Windows, HP Support Assistant, BIOS)?Have you tried restarting the Notebook a couple of times?Have you tried to run the Windows Troubleshooter? Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The HP Support Assistant will also help find a proper driver for you to use. Updated Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product. They will be released as they become available to HP. I did find a troubleshooting document for you called Touch Screen Issues. Although it does say it is for Windows 8, it will still work for Windows 10. Please follow the provided troubleshooting steps and re-post with the results. Have a great day!

Display Not Filling Screen After Windows 10 Upgrade

After performing Windows 10 upgrade the display on the monitor has a one inch vacant area around the entire display. The resolution is set correctly to 1920 x 1080. There is no way of extending it through the display settings in the PC. The upgrade was made from Windows 7. I have checked via HP and there is no Windows 10 driver available for this monitor even though Microsoft qualified all software and hardware compatible for the upgrade. The adapter is version 8.970.100.9001, dated 1/13/15. I don't know if the graphics card, ATI Radeon HD 4350 connected via HDMI, has any affect on this problem. I would appreciate any help.

I have the same problem with this monitor on using my HP Pavilion dv6 with an ATI Mobility 4200 series chip. The problem is caused by the driver inserting overscan into the picture. I can't find a way to tell Windows 10 to remove the overscan, and the Catalyst Control Center is not compatible with Win10 either. I wonder if this monitor is reporting itself as a "TV" and that's the issue: if so, a driver update could fix it.

K8T Neo FIS2R wont detect gfx card

Hi, im back again with a brand spankin new mobo (old one was faulty).
The problem this time is that it wont detect the gfx card. I've tried the Radeon 9800 and my GF4800Ti. Both work in my old reliable PC, but not in the one I'm building.
This means that when i turn on the comp, my screen wont acknowledge theres a signal coming to it.
Also a problem wih the power switch. The power switch turns it on, but wont turn it off :/.
Any troubleshooting tips anyone can give me? :(

Ok, take the RAM out and try to boot with the just the MB and CPU right after you have reset the CMOS. See if you get beeps. Also a couple of other things to suggest.
Have you checked the connections from the speaker inside the box to the front panel and then on to the MB? Also the connections from the power switch on the front panel likewise on to the MB?
Is posbible that its posting correctly, espceially without the video card, but you jst can't hear it.
Also I don't see that you ever tried to start up with a graphics card that you know works in another machine. Can you try that too?

Restore Computer Back to Vista after Windows 7 upgrade and back again?

I got Satellite L505-S6946 that came with Vista Home Premium installed (I immediately made backup-5 disks in all). I got the free Windows 7 upgrade disk from Toshiba and upgraded my laptop. I messed up and did not make the backup disks like I should have. I had to reinstall windows 7 more than once (shouldn't let others use my computer!) and it hasn't seem to run quite the same after reinstall. I also noticed that for a driver Intel ICH9 Family SMBus Controller 2930 it says no device driver installed. I didn't notice that before. And I have tried to install it. Whatever the cause, to me it just doesn't seem to run the same. I was wondering if I could go back and reinstall Vista from my disks and then upgrade to windows 7 with my upgrade again (and this time make backup copy!)? I apologize in advance if this is a stupid question but I am not really computer savvy. Thank You. Jakey58

Satellite L505-S6946
Just adding my two cents worth...
We have lots of machines running Windows Vista. (I'm typing this message on one.) They work just fine. I never even consider upgrading them to Windows 7.
Just because the Geeks don't like Vista and just because Microsoft wants you to use the latest and greatest doesn't mean you must upgrade.
I've heard some people put solar panels on the shady side of the house where the neighbors can see them.
-Jerry

Satellite A500 fn keys not working at all after windows 7 upgrade

Hi everyone,
I'm using Satellite A500 which i just did the windows 7 upgrade (32 bit) yesterday, however, i can no longer use the FN key on the keyboard which i'd use it very often.
can anybody help??? much appreciated!!
mav

Hi, thanks for your reply,
I'd some search on the forum, however, there're some similar issue, but they are not A500 model, so i m not sure it's reference.
yeah i did download and install the value added package, and restarted my flash cards, and i did change the setting of the flash card, at least now i can use it by moving my mouse to the top of the screen and they pop up. but yet, the FN key still not working at all.
i couldnt really find "common modules" or "hot key" to download, could anyone post the link here? if that would make my FN key work just like before?
Thanks alot!

On my DV7 laptop the digital media slot wont detect any cards.

The internal digital card reader does not detect a card.I have tried different cards. The cards do work fine if i use an extremal card reader. Iis this a driver problem or a hardware failure. I have reloaded the drivers . I recently lost a microwave oven due to a lighting strike on my apartment building.
Any suggestions or advice would be greatly appreciated.

Hi @FrankIvie60 ,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dv7 Notebook and having an issue with the card reader. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices. This will give the Notebook a fresh look at the USB devices when you connect them.
Here is a document on troubleshooting Memory Card readers for Windows 8.
Here is a document on troubleshooting the USB devices. The section that might help the most is USB device not dectected.
Hope this is helpful.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Detecting PCI Cards in Windows Xp using VISA

i have written a program to detect the cards for all Platforms.
When i use it LAb veiw RT it works fine but when i use it in Windows XP it does not work at all.
I have used VISA for detection .
Please find the code as attachment
Suresh Thangappan
Attachments:
PXi_info.zip ‏30 KB

Hello,
I ran the VI in my XP and it gives me an error because I don't have any PXI instrument, but if I do a GPIB it works fine. So, what do you mean by it doesn't work?
Does it gives you an error? What error and which VI is giving it?
Make sure that you have installed VISA in this XP machine and that versions match.
Let me know
Ricardo S.

Lenovo G40-70 - Which is the correct drivers after Windows 10 upgrade

Hi All, After my recent upgrade to Windows 10, I realised that the driver's preloaded by Mcrosoft are different from provided at Lenovo Official Support site. http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/g40-70-notebook-lenovo?linkTrack=hp_c1:r1_My%20Products_G40-70%20Laptop%20(Lenovo) So, should I go to update all drivers with the Lenovo's one even everything working fine after the upgrade? Regards,

Hi All, After my recent upgrade to Windows 10, I realised that the driver's preloaded by Mcrosoft are different from provided at Lenovo Official Support site. http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/g40-70-notebook-lenovo?linkTrack=hp_c1:r1_My%20Products_G40-70%20Laptop%20(Lenovo) So, should I go to update all drivers with the Lenovo's one even everything working fine after the upgrade? Regards,

Won't sleep after windows 10 upgrade

After the windows 10 upgrade, laptop won't go into sleep mode completely as before.Most often I've to put my laptop in sleep and then resume my works ASAP but after upgrading to windows 10, it is so painful to start/force-start the lappy everytime.!! The power light blinks fastly and the sudddenly stops in the last thereby putting laptop in freeze/shut down state!!I've updated all video audio drivers.Continuosly am going on installing all the Windows System update coming out daily, still nothing works out.Somewhere I read, the problem is in BIOS driver, I'm not that tech guy so I'm totally in the dark.Some one please help me out.

I just remembered that when it was in the blue screen loop the error that it was reporting was WDF _ VIOLATION.

Wont detect sd card after windows 8 upgrade

Similar Messages

Maybe you are looking for