Wont install or update the drivers.. urgent! :(

Hello,
Ive been used the BETA for a while now, and I was looking forward to upgrade to the final version 2.0.
When I insterted my Leopard disk and tried to update my drivers, it couldnt install the REMOTE, TRACKPAD or the KEYBOARD support.
I tried to uninstall these drivers through DEVICE MANAGER, so I can install the new ones from scratch, but they didnt want to install either.
Now my keyboard or my trackpad wont work under Windows....
Can anybody help me???

You should not uninstall these drivers from the device manager but use the software uninstall option to do this. If you can still use a mouse and the keyboard (unplug & re-insert the keyboard) then try a few other options.
To install the updated trackpad driver explore the Leopard DVD in Windows.
You will see a Driver folder, go into the Driver folder and continue into the Apple folder.
In the Driver\Apple folder are the Apple drivers for the remote, trackpad and keyboard. Just execute the individual installs to update the drivers.
This is really the brute force method, I propose this since you are currently in a bad state.
If you run into a similar problem in the future please use the software uninstall option in the control panel to remove the old drivers and use the repair functionality in the Boot Camp installer.

Similar Messages

  • My new 8th gen iPod nano is 'not recognized' by my computer. My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting...

    My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
    The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
    Thanks

    Try a different cable. And are you connecting directly to your computer or through a USB hub?

  • I can't connect my iPhone 5 to my windows 7, when I try to update the drivers it says access denied, help?

    I can't seem to connect my iPhone 5 to windows 7, it shows up under unspecified in the control panel but when I try to update the drivers it says access denied! Been at this for 3 days now! Tried numerous fixes, any help please?

    The iPhone 5 and iOS 6 require iTunes 10.7. Depending on what OS you have for your comptuer, could restrict you.
    Windows System Requirements
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista or Windows 7
    64-bit editions of Windows Vista or Windows 7 require the iTunes 64-bit installer
    250MB of available disk space
    Broadband Internet connection to use the iTunes Store
    Macintosh System Requirements
    Mac computer with an Intel Core processor and 512MB of RAM
    OS X version 10.6.8 or later
    Safari 4.0.3 or later
    400MB of available disk space 
    Broadband Internet connection to use the iTunes Store

  • HT1338 I'm trying to update the drivers on my epson dx4400 on Mavericks. Software update doesn't help. Any ideas?

    I'm trying to update the drivers on my epson dx4400 on Mavericks. Software update doesn't help. Any ideas?

    You could try deleting the /Library/Printer/EPSON and the /Library/Caches/Epson/ folder and then reinstalling the updates.

  • HT1551 after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

    after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

    The update failed - using a USB to microUSB lead (that Apple annoyingly don't include!), try to restore the AppleTV software to current version software using instructions here:
    http://support.apple.com/kb/HT4367
    Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

  • After installing latest update the contact photos don't show on incoming call

    After installing latest update the contact photos don't show on incoming call

    Possible iTunes issue:
    Try the following after adding photos.
    Go to file
    Then Home Sharing
    Select photos to share
    Click on All Photos already selected Do anyway
    When Apply turns black click on Apply
    Now go to Apple TV to see if photos there
    Or restart iTunes.
    Works for me every time photos do not appear on my Apple TV 3
    Hopefully will work for you.

  • HT3986 Can anyone help me update the drivers on Bootcamp.

    I use Bootcamp on my MacBook Pro (with Windows 7) for playing games and it has been working great.  I recently purchased Battlefield 3 for PC and installed and it says I need to update the Nvidia drivers to a more recent patch, so I went to the website and downloaded it, but when I go to install them it says "This graphics driver could not find compatible graphics hardware".  I have tried looking at a bunch of websites and can't find anything.  Can anyone help me or tell me where to go to find help? It would be much appreciated!
         Thanks,   Zack

    You can not change the date of birth on the account. Apple makes that clear up front when the account is created.
    The only way to "fix" this is going to be for him to create a new account with the correct information. Any apps purchased with the old one will need to be re-purchased with the new account. They can not be transferred.

  • How to install (not update) the HP LaserJet 1020/1022 on Mountain Lion? The Apple Software Update doesn't show nothing.

    Hi guys,
    I'm trying to install my HP LaserJet 1020 on my new Mountain Lion anyway I'm not able to find any driver! The HP says that I can update or install this printer using the Apple Software Update anyway I don't see any update or installation on it.
    Does someone know a way to download a driver or find a solution for this problem? With previous version of the OS It was possible to download a .dmg for the HP LaserJet 1022 (the driver was the same for both versions, 1020 and 1022). I tried to download and install the driver for Snow Leopard anyway I don't see any entry when I try to select a driver for my printer during the installation phase (the list contain only two very generic drivers for HP printers).
    Thanks for your time!

    The HP says that I can update or install this printer using theApple Software Update anyway I don't see any update or installation on it.
    Updates are only available if the software has already been installed.
    HP is responsible for updating their drivers for Mountain Lion compatibility. Not Apple.
    Doubtful the driver for Snow Leopard will run on Mountain Lion.

  • Itunes wont install always get the same messege

    Tried to install itunes on my new computer that i bought. Downloaded the Installer and when i try to install It comes up with the messege "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.
    Any Suggestions? Ive removed it. downloaded it again. and still nothing. updated the computer.

    Problem has been fixed. Turns out it was a Windows issue not itunes. thanks

  • After installing several updates, the system is unstable

    Hello,
    I tried to install my mac mini server several times, all works fine, but after installing the updates from Apple update service, the VPN, Workgroup manager makes problems.
    In the last case I installed the last great update for the snow leopard server and the last update was the Safari update. After the Safari update the connection is very slow and I get no VPN connection. Also when I start the workgroup manager for example I need 5 minutes to connect to the server.
    thx

    Thx for the fast answer....
    (Ok tried it once again to install the system with all updates and with the last update (Aiport update for mac mini) the same problem occurs.)
    changeip -checkhostname
    Primary address = 192.168.1.194
    Current HostName = xxxx.local
    DNS HostName = xxxx.local
    The names match. There is nothing to change.
    dirserv:success = "success"
    thx

  • Error after Installing and updating the DADS.CONF file

    I was able to get all the software installed for AE 3.0.1 and open the HTTP Server prior to updating the DADS.CONF File.
    So far I have not been able any errors in the Apache/Apache/logs directory that point to the issue.
    When I put the following DADS.CONF file in place:
    # ============================================================================
    # mod_plsql DAD Configuration File
    # ============================================================================
    # 1. Please refer to dads.README for a description of this file
    # ============================================================================
    # Note: This file should typically be included in your plsql.conf file with
    # the "include" directive.
    # Hint: You can look at some sample DADs in the dads.README file
    # ============================================================================
    Alias /i/ "c:\oracle\product\10.2.0\db\Apache\Apache\images\"
    AddType text/xml xbl
    AddType text/x-component htc
    <Locations /pls/apex>
    Order deny, allow
    PlsqlDocumentPath docs
    AllowOverride None
    PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
    PlsqlDatabaseConnectString ASGUSMAUDV01:1521:APPEXP ServiceNameFormat
    PlsqlNLSLanguage AMERCAN_AMERICA.AL32UTF8
    PlsqlAuthenticationMode Basic
    SetHandler pls_handler
    PlsqlDocumentTablename wwv_flow_file_objects$
    PlsqlDatabaseUsername APEX_PUBLIC_USER
    PlsqlDefaultPage apex
    PlsqlDatabasePassword apex
    Allow from all
    </Location>
    I cannot not even access the HTTP Server using the default connect sting. Any help in looking over the DADS.CONF file is appreciated.
    Thanks

    Contents of the ERROR.LOG
    [Tue Aug 21 12:39:44 2007] [notice] FastCGI: process manager initialized
    [Tue Aug 21 12:58:33 2007] [notice] FastCGI: process manager initialized
    Both of these were using the blank DADS.CONF
    Access.log (Blank DADS.CONF)
    162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET / HTTP/1.0" 200 15062
    162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/upperbox.gif HTTP/1.0" 200 153
    162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/green-green.gif HTTP/1.0" 200 952
    162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/green-content.gif HTTP/1.0" 200 809
    162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/blue-content.gif HTTP/1.0" 200 37
    162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asytrnse.gif HTTP/1.0" 200 148
    162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asytrsm.gif HTTP/1.0" 200 924
    162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asysrtb.gif HTTP/1.0" 200 901
    162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asysrt.gif HTTP/1.0" 200 1015
    162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asylrhs.gif HTTP/1.0" 200 910
    162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/rhshadow.gif HTTP/1.0" 200 59
    162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/asylttb.gif HTTP/1.0" 200 863
    162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/asysrb.gif HTTP/1.0" 200 923
    162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/welcomeHTTP.gif HTTP/1.0" 200 2780
    162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/bisspace.gif HTTP/1.0" 200 43
    162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/asybase.gif HTTP/1.0" 200 49
    162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/tree_document.gif HTTP/1.0" 200 97
    162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/art3.gif HTTP/1.0" 200 18752
    162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/lowerbox.gif HTTP/1.0" 200 150
    162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/relatedapps_cctitle.gif HTTP/1.0" 200 279
    162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/slieghright.gif HTTP/1.0" 200 69
    162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/asytlse.gif HTTP/1.0" 200 830
    162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/home_banner_2.gif HTTP/1.0" 200 6505
    162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/portals.css HTTP/1.0" 200 14795
    162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/space.gif HTTP/1.0" 200 43
    I have found no other errors.

  • Mac book wont install software updates

    mac book wont install software updates

    Dog74,
    what does it do when you try to install a software update?

  • Vista Service Pack 1 wont install. Update keeps asking for it.

    Installed Service Pack 1 with Windows Update. Update History says it was successful but it is not in the Installed Updates and Windows keeps asking for SP1 over and over. Vista SP3 is there.
    I have tried to install it directly, I closed all security programs and fire wall. I looked to see if there is any missing updates. I've restarted the computer. I have followed all the instructions on the support site.
    Service Pack 3 is installed.
    I just don't know what to do.
    I have Vista Home Premium 32bit

    Hi
    To be honest I never had any problems with my Vista updates
    The Vista updates automatically every time when Im online and when new updates are available
    How did you try to update the Vista OS?
    Did you download the SP1 firstly to HDD or did you run an automatic update?
    If the automatic update does not work try to download the SP1 firstly and then start the update procedure:
    The SP1 can be downloaded here:
    http://www.microsoft.com/windows/downloads/default.aspx

  • Can I update the drivers for my MBP ?

    Hi,
    I' m having big troubles connecting to the internet at my work. I can log on to the net and load some pages - but not google and many others. This is really strange.
    I'm thinking/hoping that maybe i can update my drivers. Can this be done on a MBP ? Where can I see what driver I'm using ?
    Sincerely
    Christian

    Hmmmm....where to begin? First off, 'drivers' are controllers for external devices (or internal ones, technically) but would have nothing to do with internet access +to selected web pages+, and would only affect general internet access if you are using some non-standard way of accessing the network (e.g. an ExpressCard WAN or a USB wireless device).
    It smells more like a DNS or proxy server issue. Is there an IT department that can help? You caould also try an alternate browser like FireFox (but any browser should load google!).
    Hope this helps...

  • HT1338 how do I update the drivers on my Macbook Air to enable me to use my broadband dongle?

    I have repeatedly tried to install my BB dongle to my MB Air with no success.  One of my mates thinks it may be a driver issue and I should download the drivers for the dongle from the apple site.  Anyone have any ideas?

    Whatever drivers you require for your broadband dongle will not originate from Apple. Check its manufacturer's website.

Maybe you are looking for