Wont load , gives message "The procedure entry poin..2 lines of symbols...could not be located in th edynamic link

'''bold text'''when I try to get online I get the following message..
The procedure entry point ...(2 lines of symbols) could not be located.

Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox version if possible.
*Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup

Similar Messages

When i try to start firefox all i get is this message (the procedure entry point is next active contex could not be located in the dynamic link js3250.dill.)

the massage is all i get

Do a clean (re)install.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

When trying to start firefox a message comes up " the procedure entry point IS Thread Desktop composited could not be located in the dynamic link library user32.dll" I then tell it okay as this is the only button it has abd it then takes me into the Add-o

When trying to start firefox a message comes up " the procedure entry point IS Thread Desktop composited could not be located in the dynamic link library user32.dll" I then tell it okay as this is the only button it has abd it then takes me into the Add-on window and freezes up and I then have to reboot and avoid using firefox
== This happened ==
Every time Firefox opened
== After trying to install Firefox upgrade and IE8 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.125 Safari/533.4

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Running windows 7 64 I get this error from downloader.exe The procedure entry point ?GetRegisterInfo@@GXPADHOH@Z could not be located in the dynamic link library transport_dll.dll

I keep getting this message from downloader.exe running Windows 7 64 bit O/S each time I start Firefox 3.6.9. The procedure entry point ?GetRegisterInfo@@GXPADHOH@Z could not be located in the dynamic link library transport_dll.dll. I have uninstalled Firefox and reinstalled it on a number of occasions but this message box persists. I can still use Firefox by just clicking the message away but it is an annoyance when starting the program. Thank you for any info you can provide me on this.

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

I got problem on installing iTunes. When I clicked iTunes out, two windows popped out. One said the procedure entry point CFAttributed String Create Mutable could not be located in the dynamic link library Core Foundation.dll.

I got problem on installing iTunes. When I clicked iTunes out, two windows popped out. One said the procedure entry point CFAttributed String Create Mutable could not be located in the dynamic link library Core Foundation.dll. and one just said *Itunes was not installed correctly. Please re install I Tunes Error 7 (windows error 127) . I've tried uninstalling and reinstalling it. But either way cant work. I really need some of your help! PLS HELP ME!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The error shares a similar pattern to that in the third box, so a similar approach should work. Look for CoreFoundation.dll in C:\Program Files (x86)\Common Files\Apple\Apple Application Support, delete it, then repair Apple Application Support.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Error message The procedure entry point ?GetIsWrapLocationValid@@YAFPBVIStandOffData@@@Z could not b

The procedure entry point
?GetIsWrapLocationValid@@YAFPBVIStandOffData@@@Z could not be found in the dynamic link library Public.dll
I get this message when trying to launch InDesign CS3. It's been working fine until today.

http://kb2.adobe.com/cps/829/cpsid_82947.html
Bob

After upgrading to v11.1.4 error: The procedure entry point ?video ... could not be located in the dynamic lybrary link webkit.dll. Please advise

After upgrading to v11.1.4 I get the error when attempting to open iTunes:
The procedure entry point ?videoTracks@QTMovie@@QBE?AV?$Vector@V?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VC rashOnOverflow@2@@***@XZ could not be located in the dynamic link library C:Program Files (x86)Common FilesAppleApple Application SupportWebKit.dll.
Please advise. I uninstalled and re-installed all Apple products numerous times now - so this is not the solution.

Try the following user tip:
iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes

The procedure entry point ?fastFree@***@@YAXPAX@Z could not be located in the dynamic link library JavaScriptCore.dll?

After upgrading from the recent version of iTunes, I kept seeing the error message (in the title). I have uninstalled, reinstalled, restarted, and not sure what else to do. All help is appreciated.
Thanks,
Jacob

Rather than following the current version (at the time that I write this post) of that Apple knowledgebase document, I'd suggest first using this user tip:
iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes
(Removing all dlls from the iTunes program files folder is generally overkill for these particular entry point errors ... the typical cause is just the misplaced out-of-date QTMovieWin.dll file.)

I have started to get the message on screen after I start my pc(apply SyncNotifier.exe the procedure entry point xml Text reader ConstName could not be located in the dynamic link library libxm12.dll.

The message I keep getting above has started to appear each time I start my pc. How do I deal with it? I have uninstalled and reinstalled itunes but no luck.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libxml2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Restart the programme, it should not display that message, it should be clear.
Good Luck

The procedure entry point ?fastFree@***@@YAXPAX@Z coulnd not be located in the dynamic link library JavaScriptCore.dll

*** is this about?

Rather than following the current version (at the time that I write this post) of that Apple knowledgebase document, I'd suggest first using this user tip:
iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes
(Removing all dlls from the iTunes program files folder is generally overkill for these particular entry point errors ... the typical cause is just the misplaced out-of-date QTMovieWin.dll file.)

I can't get my emails because I keep getting the message The Procedure entry point PORT_LoadLibery From Origin could not be located in the dynamic link libery ect

How do I stop getting this message to come up and be able to get my mail. The Procedure entry point PORT_Load Library From Origin could not be located in the dynamic links library
== This happened ==
Every time Firefox opened
== today

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

What do I do when I try to open Fifrefox 4 & get the message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll?

2 days ago, I got a message about upgrading to Firefox 4.0. I didn't do it immediately, due to lack of time. Later that day, I tried to open Firfox & got the message: Firefox can't start because xul.dll is missing. Reinstall the program to fix this. I tried several times to open Firefox & got the same result. I tried rebooting. Same result. So I opened Internet Explorer & went to the Firefox website & followed the instructions to download Firefox 4. After that, I used it last night & left my laptop hibernating last night, then continued to use it this morning. Then I closed Firefox. When I next tried to reopen Firefox, I got the new message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll. Again, I can only access the internet with Internet Explorer. Also, I have a done a good many Windows updates over the last 2 days as well. What can I do to get Firefox to open? Thank you for your help.

This is what I did to resolve this problem. First, I uninstalled Firefox 4 & removed the Firefox folder left behind. I made sure to NOT select the option to delete personal information. Next, I backed up all of the important files on my computer. Next, I upgraded my Windows 7 to Service Pack 1, which was pending in my updates folder. Then, I went to Mozilla's website & downloaded Firefox 4 again, making sure to select only the Firefox browser and not Thunderbird too. http://www.mozilla.org/ When prompted to close any open programs, I closed Internet Explorer (which I had used to get to the Mozilla website) and I disabled my Norton anti-virus. I then completed the installation & it works just fine now. It loaded all of my personal data, such as bookmarks, it remembered my password, etc. It's fine for my needs, as I'm not a heavy user of special add-ons & plug-ins. Some of those may not work yet with the new version.

I downloaded the latest version of itunes. Now I cannot open iTunes. I receive this error message: The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll. Thoughts?

I downloaded the latest version of iTunes on my PC. Now I cannot open iTunes. I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll" After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)". I've uninstalled iTunes and reinstalled to no avail. I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck. I also tried system restore and that did not fix the problem. Any thougths on a repair?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a

After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is su

After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)

If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update.

When I open my computer I receive the following message: The procedure entry point sqlite3_wal_checkpoint couldnot be located in the dynamic link library SQLite3.dll How can this be corrected? I never got this message before and I have a iPhone and iPad

When opening Windows 7 I'm receiving the following message The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.......I have never rec'd this before............I have a iPhone and iPad...............How can this be corrected without interferring with the information on my computer? Thanks

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Wont load , gives message "The procedure entry poin..2 lines of symbols...could not be located in th edynamic link

Similar Messages

Maybe you are looking for