Wont load Stuck at Apple

I got a ibook and it had a few versions of OS on it and i loaded one up. The cd-drive is broken. Now, when started up the screen opens to the apple, it moves down maybe a centember and looks like it locks up and then stays like that. It wont load further. Is there anyone that has seen this before and would know what to do?
Ibook    

Boot from your install disc, run Disk Utility. The startup up disk may need repaiiring.
Using Disk Utility to verify or repair disks

Similar Messages

  • Wont load past gray apple screen

    my macbook pro wont load past the grap apple screen i cant figure out whats going on with it any suggestions past the "recommended" ones? there is a crack in my screen but i dont think that would do anything to the computer running, my first thought is the HDD but i dont want to replace it if i dont need to.

    sorry actually lion OS

  • My Macbook wont load past the apple screen.

    ok so I have a macbook from late 2007 and it's not loading past the apple screen. Yesterday it froze so decided to turn it off and it hasnt started up since. Ive tried safe mode, resetting the NVRAM/PRAM, and then i decided to restart it and press command v and a screen popped up saying.
    npvhash=4895
    PRE enabled
    64 bit mode enable
    darwin kernel version 18.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/release_1386
    vm_page_bootstrap: 246299 free pages and 15845 wired pages
    standard timeslicing quantum is 10000 us
    mig_table_max_displ = 73
    AppleACPICPU: Processor Id=0 LopicId=0 Enabled
    AppleACPICPU: Processor Id=1 LopicId=1 Enabled
    calling mpo_policy_init for TMSafetynet
    Security policy losded: Safety net for Time Machine (TMSafetyNet)
    calling mpo_policy_init for Quarantine
    Security policy Loaded: Seatbelt sandbox policy (Sandbox)
    Copyright (c) 1982, 1986, 1989, 1991, 1993
         The Regents of the University for Californai. All Rights reserved.
    MAC Framework successfully initialized
    isong 5242 buffer headers and 4096 cluster 10 buffer headers
    IOAPIC: Verdion 0x20 Vectors 64:87
    ACPI: System state [so s3 s4 s5] (s3)
    PFM64 0xf10000000, 0xf10000000
    [ PCI configuration begin ]
    PCI configurstion changed (bridge=1 device=1 cardbus=0)
    [ PCI configuration end, birdges 4 devices 17 ]
    AppleIntellCPUPowerManagement: (built 16:44:45  Jun  7 2011)ninitialization complete
    mbinit: done (64 MB memory set
    for mbuf pool)
    FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 001cb4fffe8bb384; max speed s400.
    rooting via boot -uuid from /choosen: 49342205-A733-3921-9F2C-4D88EAA7EB64
    Waiting on <dict ID="0"><key><string ID="1">[0Resources</key><string ID= "1">I0ResourceMatch</key><string ID= "2">boot -uuid-media-</string></dict>
    com.apple.AppleFSCompressionTypeZlib Kmod start
    com.apple.AppleFSCompressionType L\load succeeded
    appleIntelCPUPowerManagementClient : ready
    Got boot device = IOService:/AppleCPIPlatformExpert/PC1000/AppleACPIPCI/SATA@1F ,2/AppleAHCI/PRT2@2/I0AHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice /
    IOBlockStorageDriver/ST980811AS Media/IOGUIDPartitionScheme/Untitled 102
    BSD root: disk0s2, major 14, minor 2
    [Bluetooth: :CSRHIDTransition] switchToHCIMode (legacy)
    [Bluetooth: :CSRHIDTransition] transition complete.
    CSRUSBBluetoothHCIController: :setupHardware super returned 0
    AppleYukon2: Marvell Yukon Gigabit Adapter 88E8053 Singleport Copper SA
    AppleYukon2:RxingSize <= 1024, TxRingSize 256, RX_MAX_LE 1024, TX_MAX_LE 768, ST_MAX_LE 3328
    disk0s2: 1/0 error.
         0 [level 3] [ReadUid 0] [Facility com.apple.system.fs] [ErrType 10] [ErrNo 5] [10Type Read] [PbnukNum 50624960] [LblkNum 8] [FSLogMsgID 142858201] [FSLogMsgOrder First]
         0 [level 3] [ReadUid 0] [Facility com.apple.system.fs] [DevNode root_device] [MountPt /] [Path /usr/lib/dyld/ . .namedfork/rsrc] [FSLogMsgID 1462858201] [FSLogMsgOrder Last]
    /SourceCache/AppleFSCompression/AppleFSCompression-24.4/Common/commonUtilsKern.c :344: VNOP_GETXATTR com.apple.ResourceFork for /usr/lib/dyld: 5: error
    /SourceCache/AppleFSCompression/AppleFSCompression-24.4/Compressors/Type4/Compre ssorType4Imp.c.304: fh_getxattr /usr/lib/dyld: 5: error
    /SoundCache/AppleFSCompression/AppleFSCompression-24.4/Common/commonUtils.c:223: supplyChunk: error
    decmpfs.c:1149:decmpfs_pagein_compressed: err -1
    CODE SIGNING: cs_invalid_page(ox7fff5fc22000): p=1[launchd] clearing CS_VALID
    Sleep prevented by SB 1, SS 0, RS 1

    reading this, your hdd has unfortunately died. have you backed your system up? if you have it is not as bad as it seems.
    you will have to buy a new drive and simply restore to that drive from the backup.

  • Imac wont start stuck on apple logo lion

    imac wont start its stuck ont the apple logo with loading ring just keeps spinning im running lion its a 2009 imac

    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk.
    If that doesn't help Reinstall the OS.

  • My iphone 3gs wont load past the apple logo

    my iphone wont charge or turn on. occasionally it will charge for 20seconds then it will get stuck on the apple logo then the screen will light up slightly as if it is going to turn on but then it goes off and i cant do anything with it again for days on end, can anybody help or is it time for a new phone?

    is the phone jailbroken? if it is, that could be the issue. if not, you should probably do a back up and then restore your iphone. if that doesn't fix it... well the phone is almost 5 years old, be happy you had it that long.

  • My iPod Touch turns on but wont load past the Apple?

    Does anybody know what has happened? I tried downloading some updates for my apps & the whole thing went blank for a moment, then the Apple appeared as if it were re-booting. Casually I waited, but it's now been stuck for about 30 minutes, I've since seen it flicker white & have attempted resetting it multiple times.
    Should I just try to let the battery die & try resetting again then? Or is there something I can do immediately?

    There here:
    iPhone and iPod touch: Frozen and unresponsive
    If not successful, do as you said, let the battery fully drain and charge and try again.

  • 3gs wont start. stuck at apple logo until out of battery

    My 3gs suddenly wont start when it ran out of battery and tried to charge it, when it had enough battery to turn on it just kept like that any help?
    3gs is latest version and jailbreaked
    haven't tried much to fix it, so i can do it all together

    Connect the iPhone to your computer and launch iTunes, then restart the iPhone by holding down the on/off and the home buttons until you see the Apple logo. If that don't fix you problem take a look at this link, http://support.apple.com/kb/HT1414

  • IPod Touch stuck at Apple logo

    My iPod Touch 2nd generation is stuck at Apple logo and won't turn on. It won't connect to iTunes either. Help.

    I am having this same issue. My battery died and now when I hook it into the computer Itunes doesnt recognize it and it wont load past the apple logo. I have tried resetting and holding down the buttons but nothing works

  • Desktop wont load

    The other day I was watching a dvd on my imac (only purchased in november) and all of a suddon it went haywire and the screen went half black and half pixilated. I of course turned it off, but now when i turn it on the desktop wont load. The apple symbol turns up and then turns to a broken symbol and the fan goes haywire. I can run the apple hardware test off the CD but that is it. I can't even start it up on the installation CD. Please help.

    Did you run the hardware test?
    Here is apples steps for trouble shooting an iMac G5 (iSight) that won't start up:
    http://docs.info.apple.com/article.html?artnum=106464
    Glor

  • My Macbook is stuck at the loading screen (the apple with the spinning circle beneath it). I went to Best Buy, they told me to call Apple Help and ask them to restore my unit. But Apple help wont help me without charging me. Help please !!

    My Macbook Pro is stuck at the loading screen (the apple with the spinning circle underneath). I went to Best Buy to get help, and they told me to call Apple Help and ask them to 'restore my unit', which he said is a matter of only about 4 mouse clicks. If it was so easy, I didn't understand why he couldn't do it for me. But he said that even though I have a 3 year warranty and protection plan with them, they were not responsible for this type of problem. Whatever.
    Anyway, so I called Apple Help, and even though he was familiar with my problem, it's been more than 90 days since I purchased the laptop, therefore I'd have to set up a service agreement to get his assistance, meaning I'd have to PAY him. So now i'm stuck, and I'm just hoping somebody knows what to do to help me
    I don't have any disc that I apparently need, and I don't remember ever getting one. However, if there is some other way to fix this issue, please let me know. Thanks for your time and assistance
    Brenna

    HI, have you blown the dust out lately?
    Does it boot better/further if allowed to cool?
    If you're sure the RAM is good, try the Hair Dryer trick...
    http://discussions.apple.com/message.jspa?messageID=13240047#13240047
    https://discussions.apple.com/message/15223603#15223603
    https://discussions.apple.com/message/15499912#15499912
    https://discussions.apple.com/message/15613068#15613068
    https://discussions.apple.com/thread/3270112
    https://discussions.apple.com/message/16053892#16053892
    No power light at all...
    https://discussions.apple.com/thread/3692775?tstart=0
    It can show on any G5, and even many other computers & electronic devices of the period.
    http://www.macintouch.com/reliability/pmg5.html
    http://lowendmac.com/ppc/power-macintosh-g5.html
    And see this last one in particular...
    https://discussions.apple.com/message/16781690#16781690
    Heat gun better...
    https://discussions.apple.com/thread/3916312?tstart=0
    If we don't get more help or answers here, feel free to join my site & ask...
    http://x704.net/bbs

  • Turned iphone off cause it wasnt working , not stuck on circle loading screen and apple screen, they go back n forth tried rebooting didnt work

    My iphone was acting up, so i turned it off and it got stuck on the black circle loading screen and apple screen, thhey go back and forth. tried rebooting it and it didnt work, goes to apple then back to circle loading screen. connect it to itunes reads it but wont sync it or restore it.

    From http://support.apple.com/kb/TS3694#error3194:
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it?

    Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it? I fear it may be stuck in some sort of reset loop which is stopping itunes from recognizing it. How do I go about the process of sending it in to apple if I cannot find a fix? Thank you in advance, it is greatly appreciated!!

    - See if placing the iPod in Recovery mode will allow a restore.
    - If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
    - Then time for an appointment at the Genius Bar of an Apples store.

  • My iphone 4s is stuck in a loop wont go past the apple logo

    hi my 4s seems to be stuck on a boot and wont load up past the apple logo and occassionally after several attepmts it has white nand error messages pop up at the top of the screen ive tried holding down the power key and home button to reboot  any more suggestions ? please help

    Mike19981 wrote:
    I just updated my phone today to ios 7 a iphone 4s once it turned on it wouldnt boot past the apple logo
    Perform a Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy...
    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • HT201407 during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings it took 4 hours an completed but my iphone still wont come on..what can i do to fix the problem? please

    during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings using itunes it took 4 hours and completed but my phone still wont come on..what can i do to fix the problem? please help #

    In trying to include what information all that I could I should have specified I DON'T KNOW THAT IT WAS DEFINATELY JAILBROKEN when I took it to the apple store they told me there's no way for them to tell if it was jail broken or not. I'm only going by what ppl have told me COULD HAVE BEEN DONE TO THE PHONE. With that said the only thing I know for sure is that the apple tech at the Genius Bar told me that someone took control of my root menu in February &amp; I've had no control of my phone since. I asked him how to regain control &amp; how he knew his exact words were "oh that is out of our scope of capabilities here at this level &amp; you would need an apple engineer to fix it". I said ok then how do I get an apple eng then? He laughed &amp; said you can't!!!! To which I was furious I came home &amp; called apple requesting to speak w/the fraud dept to file a report they said we don't have a fraud dept!! So after a 45 mn phone call again I left w/no answers.
    @TJBUSMC1973-
    I DON'T HAVE THOUSANDS OF DOLLARS TO SPEND HIRING AN ATTORNEY &amp; Although I appreciate your suggestion I fail to how an attorney would be able to facilitate in any way since there's no suspect. I cannot prove that it's him doing it so I certainly can't pursue legal action w/no proof &amp; no money. :'((
    Again I thank you for your advice but I don't think that will help.
    I was looking more for a TECHNICAL way to avoid this happening w/a new phone should I buy one or trying to get them out of my phone now! Such as installing some kind of software protection?? Someway to clear out the entire phone (other than factory reset which was done 10 x's w/no success, etc. if this person got in then there HAS TO BE A WAY OF GETTING HIM OUT, right????

  • Iphone stuck with apple symbol and wont start up

    i updated my iphone and when it finished and went to reboot it just stays stuck on the apple symbol it constantly reboots and will never connect to my laptop i dont know what to do if anyone can help please do

    Hi,
    Luca224 & Ingo2711. Thanks for bringing this topic. on 29th Nov. I faced the same problem on my iPhone 3GS 32GB Firmware 3.1.2, iPhone stuck with apple symbol and wont start up. I have tried with 10 Seconds Sleep/wake-up button + home button to reset. But didn't work. Did google about an hour with many blogs. Finally I made a call to 3 iPhone care and spent 30 minutes and explained whatever I have done; iPhone customer care asked me to go to nearby iPhone service center in Sydney. BUT BY LUCK CLICKED ON iTUNE AND GOT THE OPTION FOR ONLINE FORUM FOR APPLE iPHONE. Many many thanks to Ingo2711 who has given the solution link and also thanks to Luca224 , who raised the issue. I feel, this is a common problem with iPhones those who using iPhone 3GS 3.1.2...... but try the link http://support.apple.com/kb/HT1808 and thanks to Luca224 & Ingo2711. PLEASE FOLLOW THE INSTRUCTION CAREFULY:
    1. Verify you have iTunes 7.5 or later. Apple recommends using the latest version of iTunes.
    2. Disconnect the USB cable from the iPhone or iPod touch, but leave the other end of the cable connected to your computer's USB port.
    3. Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off. _+(in my case - red slider didn't appear, but i pressed the Sleep/Wake button until the iPhone went off, finally it was just off... i was frustrated... tried 3 times with more patience )+_
    4. Press and hold the Home button while reconnecting the USB cable to iPhone. When you reconnect the USB to iPhone, the device should then power on. +_( Do exactly as it says)_+
    Note: If you see the message "Charging... Please Wait" or you see the screen pictured below, let the device charge for at least 10 minutes to ensure the battery has some charge and then start with step 2 again. +_(True ... for me it happened 3 times)_+
    5. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. +_( I was nearly frustrated at my 3rd attempet; my thumb was hurting as I was holding the home button for few minutes..... but finally it worked yahooooooooooooooooo...... suddenly changed my decision.... about going to 3/Apple service center)_+
    6. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message:
    If you don't see the "Connect to iTunes" screen, then disconnect the USB cable from iPhone and repeat steps 3-6.
    Because you must restore iPhone or iPod touch, iTunes will not recover data from the device, but if it was previously synced on the same computer and the same user account, it should restore a backup (if available). See document HT1414, "Updating and Restoring iPhone Software."
    If you are still unable to restore the iPhone using this method, check Apple support for further troubleshooting and/or service options.
    Note: If you sync both an iPhone and an iPod touch to the same computer, make sure you select the correct backup to restore your settings from (don't select an iPhone backup if you have an iPod touch and don't select an iPod touch backup if you have an iPhone).
    **** ( BACKUP FROM YOUR iTUNES : MAC/PC; AS I GOT MY 95% DATA FROM THERE.... GOOD LUCK)******* IF IT WORKS PLEASE POST YOUR EXPERIENCE....*
    THANKS

Maybe you are looking for

  • How to delete the delta queue in the ECC

    Hi everyone! After I tryed to save a new Infopackage and I have the error : (Deltas already loaded for request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG init. selection; no 2. init Message no. RSM1071 Diagnosis Deltas have already been loaded for the init. sele

  • Impact of upgrading SAP 4.6C to ECC6.0 to Java application

    Hi, Currently, my Java application is: 1. using SAP 4.6C as backend 2. using Java 1.4 3. using SAP Enterprise Connector in SAP Netweaver Developer Studio 7.0.15 to generate the BAPI proxies 4. using JCo 2.1.8 If now the backend SAP system is going to

  • Can the system name of the Fabric Interconnects be changed

    I need to change the system name of the Fabric interconnects I have given eg. EDCD the FI now have EDCD-A EDCD-B I need to change it to ... ECCD-A ECCD-B.. is it possible ?

  • Unexpected value matrix(1,0,0,1,NaN,NaN) parsing transform attribute Anychart

    We are running Oracle Apex 4.2 and whenever a user creates a new session,  the chart on the home page shows the No Data Found Message. However, when you refresh or submit the page, the correct data and rendering appears. On the initial page load, the

  • What is DME

    < MODERATOR:  Message locked.  Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. > Hi,          kindly can anyone tell me what is DME and how it can be configured