Woofer and centre speaker not working

Hi, recently purchased a Creative P580 and I can't seem to get the woofer and centre speaker to work, I have a 5.1 sound card and it does support 4 channel sound, suuround sound is turned on, any ideas? thanks Pete

Pete,
You didn't mention specifically which card you have, or what kind of audio you're testing, but take a look at this knowledgebase article first. For music, for instance, you would need to enable CMSS if you want sound out of all of the speakers, as the source isn't real 5.1
Other than that, just make sure the speaker settings for the card are set to 5.1, and that you've adjusted specific volume levels for speakers (if it's available on your card - like a center speaker volume bar in the mixer).
Cat

Similar Messages

  • HT4587 My airport express and wireless airplay speaker are connected to wife, but airplay and homesharing are not working...what to do?

    My airport express and wireless airplay speaker are connected to WIFI, but airplay and homesharing are not working...what to do?  Everything was working fine until about two weeks ago, all of the sudden airplay has disappeared from the iphone, itunes on the laptop, and the apple remote for iphone.  I have restarted the router many times, re-setup the airplay speaker and the airport express and booth are showing as being properly connected to the router when I log into the router IP address.  I was on the phone with Apple support for 30 minutes they blames verizon, got on the phone with verizon and they stated the settings were all correct and compatible with apple, got back on the phone with apple and they again are blaming verizon and trying to get me to get an airport extreme because that would fix the problem...any suggestions, please!

    There are three Airport resets, soft, hard and factory default.  It would probably be beneficial if you tried each one in sequence.  Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.

  • Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

    Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

    Make sure the silent switch is not set to mute.  If you can see the red dot, it is on mute.
    It may think you have headphones plugged in, try plugging and unplugging a wired headset a few time.
    The next step would be to restore as new.
    If none of that works, a warranty exchange would be the resolution.    

  • TS3274 I plugged in my earphones and it does not work. it still plays on the Ipad speaker

    I plugged in my earphones and they do not work, it just playes thru the Ipad mini's speaker

    To do this in iMovie 11. use the SHARE menu. Share your project using the Share menu and choose Export Using QuickTime.
    In the Dialog box that comes up, choose Sound to AIFF, or one of the other sound options. This will create a file that you can drag into iTubes.

  • New X-Fi USB problem: Signal for sub and centre speaker seem to come through the same channe

    .. im not very technical so Ill try and explain this as best to my ability!!
    I recently purchased a X-Fi soundcard to use with my 5. surround sound system and I seemed to have a problem as soon as I set it up. When I play any music there is no bass at all, however when I switch the two input cables (centre/sub) over at the back of the sub there is too much bass and it sounds like its just the output for the centre speaker, only coming through the subwoofer and the centre speaker stops working.
    I'm on a Acer laptop if this hel
    ps.
    . im guessing its a problem with drivers as im almost certain the physical setup is ok. Ive tried a couple of other friends 5. setups with my soundcard and exactly the same thing happens.
    Im really stumped so any help or suggestions will be greatly appreciated.
    Cheers,
    Jamie?

    Ive tried looking for an option like this but cant seem to find one. Is it a standard feature with creative sound software?

  • I had an iphone 4s and it worked nice with facetime and imessage using my phone number but  it was stolen on December so I buy a new iphone 4s using the same cellphone number  but now imessage and facetime does not work with my number, it only works with

    I had an iphone 4s and it worked nice with facetime and imessage using my phone number but  it was stolen on December so I buy a new iphone 4s using the same cellphone number  but now imessage and facetime does not work with my number, it only works with my apple ID.   Please Help me I speak Spanish so  if my English is not ok  I´m sorry about it.
    Do you think that apple has to   reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s?? 

    I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more.  I am not always somewhere I can charge my phone.
    Your points are true; however it doesn't help me......

  • Internal speakers and headphones are not working

    I have hp g6 2231tx os Windows 8, brought it a month ago..now it's internal speakers and headphones are not working..I enabled in playback device from sound mixer and reinstalled drivers but still not working..it's because of hardware or software??

    Hi,
    It could be either Hardware or Software related, so try the following and let me know.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58517.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I have downloaded an app and it does not work

    I downloaded two apps. They are both are the same application, on;y difference is that one is the 2.0 version and the other 3.0 version.
    When I downloaded the 2.0 version I thought this was the latest version, but turns out there was another newer version. But I tried the 2.0 version first and this does not work on my mac. The application is Wondershare Data Recovery. It is not able to see any devices on my mac.
    So tried the 3.0 version and again same problem, does not work, funny because after careful researching on what product to buy I decided to download the trial version and it works fine. Only thing is that I need to but the full version to successfully retrive my disappeared images from memeory card, from my camera phone.
    anyway the point is, I have just wasted £95, and I would like this back, or at least the problem resolved. Any help would be appreciated.
    Thanks
    C

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Updated -
    I only find the v3.0 in the UK Mac App Store (MAS). But on the developer's website I find two separate apps; Wondershare Data Recovery for Mac, which is v3.0 and Wondershare Data Recovery for iTunes, which is v2. Where did you buy Data Recovery for iTunes? I don't find it sold in either the MAS or the iTunes App Store.
    Have you used the support link to the developer on the apps pane in the MAS? That is who Apple will direct you to contact.
    Did you remove the trial version before downloading and installing the paid MAS version(s)?

  • The music buttons in the control centre are not working ,What should i do to get them working

    the soft music buttons in control centre are not working,
    what should i do to get them working

    Try trashing  apple.com.dashboard.plist from preference library and restarting Mac.
    Quit all applications.
    Open Finder- Click the left most icon on the Dock.
    Holding option key click the Go menu from the menu bar.
    Select Library and then Preference folder.
    Select   apple.com.dashboard.plist   and move it to trash.
    Restart Mac.

  • IPhone4S external speaker not working

    i hv try clear the headphone jack but not working,
    clear the dust outside the speaker not working
    what else can i do, as i don't want to update my mobile which it might coz all the memories within the mobile lost....
    what to do??

    RRFS Northern Nevada
    Re: External speaker port not working 
    May 11, 2012 8:25 AM (in response to Tremolo Arm)
    A few days ago I tried to help a guy with Bose External Speakers and we found the male jack isn't quite long enough to make the connection:
    PROBLEM SOLVED!!
    Just to share information for others who might come across this problem with Bose or any other external speakers, where the male jack doesn't quite go in far enough for the MacBook to recognize it, here is the solution that worked for me:
    http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
    This is a very inexpensive solution and works great for me.  I'm listening to my Bose speakers now and they sound great!!  Thank you to all of you for your suggestions and help troubleshooting.

  • After upgrading IO5 speaker not working

    Please advice how to resolve speaker problem after upgrading to IO5, speaker not working and volume bar is missing too.

    What Troubleshooting Steps have you tried...
    The Basics are Restart... Reset... Restore
    Reset your phone:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
    iPhone Reset
    http://support.apple.com/kb/ht1430

  • HT201401 I have I phone 4s and the speaker stop working suddenly, I can hear through the headphone, please advice what is the problem? Thanks

    I have I phone 4s and the speaker stop working suddenly, I can hear through the headphone but when I remove the headphone can not hear anything , please advice what is the problem? Thanks

    Thanks for your reply, but what shall I do now ? I bought this phone from china's apple store, and I am in Egypt so there is no warranty for this phone in my county, please advice how can I solve this problem? Is there any troubleshooting tips I can follow to solve this problem ?
    Thanks  

  • Hp solution centre alone not working in my windows 7 which has 13 version driver

    I installed the hp full pack for hp d1360 software from hp website. Every other thing including hp update are working perfectly. But the HP solution centre is not working. I have tried repeated uninstall or install but to no avail.
                   Moreover, if i update the patch file then i get Read Error with a blank screen. What does that denotes and how to solve this problem. Hp experts would see my post and give the correct solution.
                          I have tried all the things, and what is prevented me from accessing the hp solution centre, a great feature, which could not be assessed.

    Please run the HP Print and Scan Doctor.
    If this does not resolve the issue, please feel free to write back for additional troubleshooting instructions.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • My new iPhone 4S speaker not working why?

    my iPhone 4S iOS 7.0.3,model MF266HN/A,8GB one speaker not working why? What can I do?

    All iPhones are mono. Stereo is only available on Earphones.
    Bottom left is mic and right is the speaker.

  • Dc7700, window7, machine speaker not working. migrating from window xp to 7

    dc7700, window7, machine speaker not working. migrating from window xp to 7

    Hi:
    Just download and install the latest Realtek HD audio driver from the Realtek site.
    Accept the agreement. Download and install either the first or second driver on the list depending on whether you installed the 32 or 64 bit version of W7.
    http://www.realtek.com.tw/downloads/downloadsView.​aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT​...
    Paul

Maybe you are looking for

  • UNABEL TO DO WRITE-UP FOR ASSET AS IT IS ASKING FOR COST OBJECT.

    Hi I am unable to do writ-up asset as error message is coming saying that cost element require a cost object assignment. But in asset master we have cost object assignment. I have checked my all configuration seems to be correct but i don't know why

  • In lion mac mail show or hide message preview

    in mac mail the message preview says to double-click the separator bar to show or hide preview.  I do and it closes ok, but will not open again.  I double click on both sides it does not open again.  Is there a macro to open and close the preview pan

  • Report to find out POs sent to supplier via fax or email

    All, Is there any standard report to see POs sent to supplier via fax? In other words list to see if POs are sent or no. Please advice. Thanks

  • Changing Look and Feel of Annual Appraisal document

    Hi all, I have the requirement to change the look and feel of Annual Appraisal document. I need to add a header to the first column in Appraisal document. I am confused as to where the changes are to be made (In HAP_DOCUMENT,Annual template or BSP co

  • My problems with getRequestDispatcher

    My piece of code: req.getRequestDispatcher("myfile").include(req,res); out.println("</P>***TAIL***"); 'myfile.java': import java.io.*; import javax.servlet.*; import javax.servlet.http.*; public class burua extends HttpServlet { protected void doGet(