Worbooks not visible in User menu after Upgrade from BW 3.0 to BW 7

Hi,
We're currently processing the Upgrade of our BW system.
We meet a problem about the visibility of our existing workbooks in User menu of the new Bex Analyzer. The system is apparently successfully upgraded, we nevertheless have this issue. We know that we have to convert the workbooks, but before doing that, we would like to see them....
Can someone help us ? Is maybe it a authorization problem ?
Thanks in advance for your help!
Steph.

Can you still see them in the 'old'  BEx?
If so: try to execute them there.  If you get no error => no authorisation problem.
Also, in the new BEx you can try to find them via the find button.
Bear in mind that with the NW04s BEx you don't see the whole menu tree, but only one level at the time.
I should also mention that there are problems with displaying favorites stored in folders.  Note 955979 solves that.

Similar Messages

  • ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

    After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
    Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
    My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
    Any ideas on how to get the iPod recognized again in iTunes under Leopard?

    Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
    iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
    iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
    Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
    Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

  • Universal Worklist UWL not working in NW04s SPS9 after upgrade from NW04

    Hello all,
    this is just a hint in case anyone has the same problem with the UWL.
    It happened to me in 2 cases, that in a Portal 7 SPS9 the UWL only showed a blank page after upgrade from NW04. In NW04 the UWL worked.
    The reason for it was something like a corrupt deployment (but there were no according error messages in any log files). The SAP Support told me to redeploy the UWLJWF*.sca according to note 895523, that worked.
    You can check whether the deployment is the reason of a non-working UWL setting the property "Launch Web Dynpro UI" to 'no'. Then the old HTMLB sources (that should work) are used (But it is not recommended to use the old sources anymore)
    Kind regards
    Andreas

    .. just a hint ..

  • Screens not working in ECC 6 after upgradation from 4.6c.

    Hi,
    The custom developed screens which where developed in 4.6c version is not working properly in ECC 6 after upgradation.Do i have to make any more changes for this .? If anyone have an idea please help me in this issue.The custom developed things are an extended functionality we have done to r/3.
    Regards,
    jinesh kumar c.

    Hi,
    Check the Transportatation Logs in STMS for the programs/screens and check whether they are successfully tranported or not?
    Because some times we get Dynpro errors for transportation of the screens.
    Reward if useful.
    regards,
    Anji

  • Font Book "not compatible" with 10.9 after upgrade from 10.7

    I upgraded from os x 10.7 to 10.9 on my iMac and now my font book won't open. I keep getting a message that says my version of font book is not compatible with 10.9. Is there a way to reinstall font book?

    No,
    You should download and install the 10.9.4 combo update. OS X Mavericks 10.9.4 Update (Combo)
    As with any system upgrade or update it is wise to backup first.

  • User Settings not working in Calendar Express after Upgrade from 6.2 to 6.3

    After Installing Patch 121657-19 the Calendar Express view seems to mix up
    the default preferences with the user selected preferences.
    For example let's say the user selects the green color scheme in the options panel,
    at the next login to Calendar Express the user gets for the default blue color scheme
    for the top frame, and the green colors for the middle frame.
    This seems to randomly change for each page and even between just reloading the
    page with the browser's reload button. It seems like each frame just randomly has
    either the default or the selected color scheme.
    This also seems to happens with the other User Preferences like "Default Initial View"
    or "Default Calendar Group".
    Any idea where to look to figure this out is greatly appreciated.

    mwohlf wrote:
    After Installing Patch 121657-19 the Calendar Express view seems to mix up
    the default preferences with the user selected preferences.I hit the same issue with a 6.2->6.3 upgraded system and a fresh 6.3 installation. A quick search didn't reveal any pre-existing bugs nor could I find any obvious problems delving into the xsl code -- please log a Sun support case to have this issue looked into further. Please note that in 6.3 calendar express is a deprecated interface so you should be making every effort to move to UWC/CE anyway.
    Regards,
    Shane.

  • Firefox 3.6.x will not start on Windows Vista after upgrading from 3.5.13

    I have tried to upgrade Firefox 3.5.x (currently 3.5.13) to several versions of Firefox 3.6.x (currently 3.6.10). Whenever I try to open Firefox after the 3.6.x install, nothing happens. This occurs even if I uninstall 3.5.x first. If I uninstall 3.6.x and reinstall 3.5.x everything works fine.

    Did you check your security software (firewall)?
    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
    See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

  • Some Calculations are not working in Discoverer 10g after upgrade from 4.1

    Hi Gurus,
    We are recently upgraded Oracle Discovere 10g from 4.1, some calculations are not working in Discoverer 10g. I appreciate if you could fix below calculation(s) in 10g.
    CASE WHEN TRUNC("Expenditure Item Month") = '31-JAN2007' THEN SUM(Wtd Qty A) WHEN TRUNC("Expenditure Item Month") = '28-FEB-2007' THEN SUM(Wtd Qty A) WHEN TRUNC("Expenditure Item Month") = '31-MAR-2007' THEN SUM(Wtd Qty A) END
    Thanks & Regards
    Vikram

    Sabra,
    Not sure exactly what this might be... there could be an issue there.
    Please make sure that you review the upgrade.log. Are there any errors / warnings?
    Also, you might wanna peek the Metalink Note:262623.1 - Master Note for OracleAS Portal Upgrade Issues, where you'll find some nice things where to start looking at.
    Later you may wanna open a Service Request into the Oracle Support.
    I hope it helps...
    Cheers,
    Pedro.

  • Old iMessages not showing on iPhone 6 after upgrade from iP5

    Hey guys,
    I've picked up my iP6 today and I can't see any of the old iMessages I've had. They are still showing on my MBP but not on the new iPhone (MBP is still running Mavericks as I don't want to upgrade before I submit the project for work next week... just a precaution ). Any ideas?

    I haven't done a recent backup - any chance I can get them synced via iCloud? I've assumed this would happen since it's being constantly synced with everything else I've got running on iOS

  • TS1493 files not visible on ipod nano after disconnect from itunes

    I have an iPod Nano (6th generation - 16 Gb) which was purchased in early 2011. All of a sudden all files in all categories (music, audiobooks, podcasts, etc) are no longer visible once it is disconnected from iTunes on my laptop. When reconnected to the laptop the files are visible again in iTunes - so they are still on the device.  I have searched the Apple online support info and that only seems to provide complicated and unhelpful information about redesigating hard drive network maps etc., which is an action I am not prepared to risk for fear of making a bad problem worse, or contacting my "administrator" - which is me!  Can anyone offer any solutions that don't require a PhD in computer science?

    Here are a couple of additional pieces of information that might provide a clue:
    1) At home, my iPod shows up as having the name I used when I registered it. On the second computer, my iPod shows up with the name DATA1.
    2) I have an iPod 4GB mini. At home, that's pretty much the amount of space that shows up in the disk space bar (near the bottom) of iTunes. However, on the second PC, the disk space bar shows 10.35 GB used, 15.66 GB free! Which is just freaky, since it's still a 4GB iPod mini.
    3) According to the iTunes display, everything is transferring absolutely smoothly. Since the iPod is configured to transfer music manually, the Do Not Disconnect sign is flashing throughout, but when I'm done and click on the eject iPod button in the lower right hand corner, it turns off, just the way it's supposed to and I can disconnect my iPod. It's just that my songs aren't visible anywhere on my iPod when I try then to play them.

  • Autoconfig is not running on Db Tier after upgrade from 9.2.0.6 to 9.2.0.8

    ADX Database Utility
    getConnection() -->
    sDbHost : hari
    sDbDomain : qsoftindia.com
    sDbPort : 1521
    sDbSid : RANI
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@hari.qsoftindia.com:1521:RANI
    Connection obtained
    -------------------ADX Database Utility Finished---------------
    Verifying connection to the Database
    Connection to the Database established
    Verifying existance of the table: ADX_PRE_AUTOCONFIG
    Table does not exist. Exiting RestoreProfile...
    The log file for this session is located at: /home/applmgr/ranidb/9.2.0/appsutil/log/RANI_hari/03281437/adconfig.log
    Message was edited by:
    Hariprasad M V

    After applying 3253460 & 5478710 patch i am getting this error.
    AutoConfig Services Phase
    Running Service Process 1 of 1 for AppsUtil
    Executing script in InstantiateFile:
    /home/applmgr/ranidb/9.2.0/appsutil/install/RANI_hari/adcrobj.sh
    script returned:
    adcrobj.sh started at Tue Apr 3 14:15:37 IST 2007
    Parameters passed are : APPS apps
    The environment settings are as follows ...
    ORACLE_HOME : /home/applmgr/ranidb/9.2.0
    ORACLE_SID : RANI
    TWO_TASK :
    PATH : /home/applmgr/ranidb/9.2.0/Apache/perl/bin:/home/applmgr/ranidb/9.2.0/bin:/usr/bin:/usr/sbin:/home/applmgr/ranidb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/home/applmgr/ranidb/9.2.0/Apache/perl/bin:/home/applmgr/ranidb/9.2.0/Apache/perl/bin:/home/applmgr/ranidb/9.2.0/bin:/usr/bin:/usr/sbin:/home/applmgr/ranidb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/applmgr/bin
    LD_LIBRARY_PATH : /home/applmgr/ranidb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/home/applmgr/ranidb/9.2.0/ctx/lib
    SQLPLUS Executable : /home/applmgr/ranidb/9.2.0/bin/sqlplus
    SQL*Plus: Release 9.2.0.8.0 - Production on Tue Apr 3 14:15:37 2007
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.8.0 - Production
    adcrobj.sh exiting with status 1
    ERRORCODE = 1 ERRORCODE_END
    .end std out.
    .end err out.
    WHAT SHALL I DO

  • HP Media Center PC m1050e - Can't connect to internet after upgrade from XP to Windows 7

    My desktop PC with Windows 7 will not connect to the internet after upgrading from XP to Windows 7 Home Premium.  This upgrade actually required saving files and a fresh install of Windows 7.  When getting Router support help to load a new driver, I keep getting a an error message "Realtek Network Contoller Was Not Found".  They say it's an issue that HP will need to help resolve.  Can anyone help?
    This question was solved.
    View Solution.

    Thank you very much for your help.  I will look into the two options you gave me.

  • About Me link is not visible in Welcome Menu if placed on custom location in Custom Master Page

    Experts,
    I am facing a problem in my -ongoing SP 2013 project's branding. The problem is with Welcome Menu. I need to put the welcome menu at a custom place rather than in ribbon area. for this I added welcome menu snippet inside my Master Page HTML but there is
    a problem with it. On ribbon link "About Me" is visible while at the same time link "About me" is not visible on welcome menu which has been inserted on custom place. below images describe my problem more accurately.
    I need help in this regard if some one can help me. For your information My User Profiles are properly configured and working. 
    HBkhan

    Hi Haris,
    I tested the same scenario in my environment, and the link will display My Settings link instead of About Me link when there is more than one welcome menu in the page.
    If you want to put the welcome menu at a custom place rather than in ribbon area, I recommend you remove the welcome menu in the ribbon area(suitebar) after putting the other welcome menu at the custom place.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Smartview reports do not open in HFM v11.1.2.1 after upgrade from v9.3.1.

    Smartview reports when I attempt to open in HFM v11.1.2.1 (after upgrade from v9.3.1), points me to launch v9.3.1 workspace. Any advise pls... Thanks, Mark

    Mark,
    I still don't fully understand the issue. Smart View is not launched from Workspace -- it is instead run from within one of the Microsoft Office products (Excel, Word, PowerPoint, Outlook). Are you instead asking about Financial Reports? These are run from the Explore menu within Workspace. You can view these as html or PDF.
    A little more confusing is the fact that Smart View can run a Financial Report from within any of the Office products. In any case, when you use Smart View in 11.1.2.1 you could open a connection to the Workspace server (the connection in Smart View is defined in the Smart View options under Advanced > Shared Connections URL). Assuming you have provided a correct URL there, pointing to the 11.1.2.1 workspace server, you should see the available shared connections when you open a new conenction.
    I re-read your e-mail and wonder if you are confusing things a bit. If you log into Workspace, using Internet Explorer, each user has their own preferences as to what page launches by default upon login. I think you are saying that a usr logging into the 11.1.2.1 workspace somehow has a default page leading them back to the 9.x workspace? If so, check their preferences to examine the default document and it's URL. Once logged into Workspace, choose File > Preferences > General, to view the Startup page. You can make any changes here, but this is user-by-user.
    --Chris                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • My ipad will not stay activated after upgrading from version 7 to version 8.

    After upgrading from version 7 to version8 I cannot keep my ipad activated.  I have tried online tech support and visited an Apple store with no one able to tell me what is happening.  Some said it might be had ware problems.  Other say it might be software problems.  With vs 7 I never had the problem.. I have anolder ipad with vs 5 and do not have the problems.  any feed back from anyone.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Maybe you are looking for