Word 2007 file not displaying from CHM file link

Hello all! I took the time to search around the forum before posting this, so I hope I didn't miss the answer somewhere.
I'm using RH 8, working on a Policy and Procedure manual, resulting in a CHM file. I've worked in earlier versions of RH with the same issues as everyone else (network deployment is a no-no, etc.), but this is the first time that I've had an issue with a linked-to Word file (linked as a "Link To File" link from within the project).
When navigating through the CHM file on a local drive, and upon clicking on a link to a Word file, I get this warning dialog box:
If you were to click "Open", you get a few-second delay (as if Word were opening), but then nothing happens. The Word file does not open. I believe the issue is with Office 2007. I tested this exact same CHM file on a PC running an older version of Office, and the Word file opens without issue.
Has anyone seen this type of behavior? Is there a RH 8-based solution?
Thanks for any help you can give!
Bob

Try Word Repair Toolbox, it's open source and may get your info back
http://www.word.repairtoolbox.com/
As free method to get your word documents back:
Word may have automatically saved your file.When you start Word the next time, if any AutoRecover files were found, results will be displayed in the Document Recovery pane. Auto recovery option for word 2007 are below:
1 Click the Microsoft Office Button, and then click Word Options.
2 In the Navigation Pane, click Save.
3 In the AutoRecover file location box, note the path, and then click Cancel.
4 Close Word.
5 Open the folder that you noted in step 3.
6 Look for files whose names end in .asd (AutoRecover files).
7 If you find the Word document that you are looking for, double-click it to open it.
8 Save it immediately.

Similar Messages

Include text file and display from text file

Ok. I'm found the site with the monkey on the the flash thing and all it shows is a name, email and something else and I used it and it works by including a txt file and displaying text from that file as putting down this information
name.text = this.name;
and I can't find the site anymore to get help.
I want to know how to include a PHP script that shows this information like this
text=something I need&username=My Name&email=[email protected]
I want to show this stuff on the flash but every time I execute by using it as localhost/test.php, it will show a sentax error.
This is really stressing me out and I need a lot of help on this stuff.
Can someone help me?

ok. let me describe something else.
there's 3 text boxes that is dynamic text.
one of them is called name
the other one is called email
and last one is called location
in the text file, it shows this for importing to the flash file
name=My Name&email=EMAIL&location=My Location
When viewing the flash file that you created, it shows the name, it shows the email, and it shows location.
When I do it on my own even with a text file, it keeps on saying that there is an error on line 1.
I found a site that shows how to do it and it shows what to put in a text file, and it shows the action script. On the FLA file that he shows me has a monkey on the flash file and it has 3 text boxes that I described above. As well as the text file, it is the same. I used the example and it worked but I can't find the example again. I don't know what happened to the website and I don't know what happened to the download I had but it is not downloaded any more. I have adanced systemcare pro so it clears out my recent web searches and my recent downloads so I can't find it. I did a google search on anything about action scripts. I even did a monkey action script search and I couldn't find it.
It's making me mad and I don't know what to do. This is stressing me out way more than you think.
UPDATE:
I did a google search on a file I found in my www folder and I found it. finally.
Here's the site.
http://www.kirupa.com/developer/mx/externaldata.htm
now, I need to figure out how to load it from a PHP file.

View the .rtf file not display the data in BI Publisher Enterprise.

Hi,
Platform: OBIEE 10g in NT XPsp2
View the .rtf file not display the data in BI Publisher Enterprise.
Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
It is showing only the .rtf file without data. Why there is no data?
Please guide me to solve this issue.
Thanks,
Jo

Thanks for you reply,
Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
We dint face this kind of issue while developing other reports.
So please let us know if you have any idea on why we are facing this issue.
Regards,
Maneesh

Bridge CS3 Does Not Display Pentax PEF files

Hi,
I am running Vista and have Bridge CS3 installed on my Notebook. I updated Bridge to v 2.1.1.9 and have added Camera RAW 4.5. My problem is that Bridge does not display Pentax RAW files from a K20 camera (its on the supported list). DNG and JPG files show correctly. Bridge only shows a PEF Icon for each image. When you double click on the Icon, the file opens in Camera RAW 4.5 correctly and also in Photoshop CS3.
Can anyone tell me what I need to do to see the PEF images in Bridge?
Thanks
Keith

Revisit the download page, look at the instructions, and make sure you unzipped ACR to the correct folder, and you don't have an ACR in two places.

ICO file not displaying at run time?

Hello Experts,
I an using fusion 11.1.2.1 32 bit. I have Copied the Icons as well as GIF files in C:\Oracle\Middleware\Oracle_FRHome1\forms\java folder.
At button property i set Iconic to yes
and file = addrow
Icon not display at run time.
but when i set file = abc.GIF
image is displaying at run time.
My doubt is that ICO file not displaying at run time while GIF file are displaying.
Do i need to change configuration ?
Please do the needful.
Thanks
Yash

Hi Yash,
First Try this steps
To resolve this issue, follow these steps:
Double-click My Computer, and then click Options on the View menu.
Verify that the Icon file type appears on the File Types tab. If the Icon file type does not appear in the Registered File Types box, skip to step 10.
Click Icon in the Registered File Types box, and then click Edit.
Verify that the following settings exist, and then click OK:
The Description Of Type box contains Icon.
If there is a Confirm Open After Download check box, it should be selected.
If the settings do not appear exactly as listed in step 4, click Remove, click Yes, and then click OK. If the settings do appear as listed in step 4, skip to step 10.
Click New Type.
In the Description Of Type box, type Icon.
In the Associated Extension box, type ICO.
Click OK, and then click Close.
Use Registry Editor to view theHKEY_CLASSES_ROOT\.icokey, and then verify that the default string contains the following value:icofileIf the .ico key does not exist, create it, and then insert the value listed above. If any other values exist in the .ico key, delete them.
Use Registry Editor to view theHKEY_CLASSES_ROOT\icofilekey, and then verify that the default string contains the following value:iconIf the icofile key does not exist, create it, and then insert the value listed above. If any other values exist, delete them.
Create a new key in the icofile key called DefaultIcon , and type %1 as this key's default value.
Quit Registry Editor, and then restart your computer.
Second Try this
Simple way
Copy your images to:
1
c:\Oracle\Middleware\as_1\forms\java\
Notes:
- Icon files may not be supported.
- In case of a Java security issue when using gif images, you will need to create a jar file and sign it with oracles sign-tool (see below, point 6).
- In case you having trouble with oracle’s sign-tool, do it directly with java’s
Recommended way
1. Create a “icons” folder and place all your gifs in there
i.e. “c:\Oracle\Middleware\as_1\forms\java\<icons>”
2. From within icons folder make a jar file of all the gif images:
1
jar -cvf frmicons.jar *.gif
3. Copy this new jar into “c:\Oracle\Middleware\as_1\forms\java\”
4. Edit/update formsweb.cfg file:
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\formsweb.cfg …to update/include:
1
2
3
4
5
6
7
8
9
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=codebase
# Forms applet archive setting for other clients (Sun Java Plugin...etc)
archive=frmall.jar,frmicons.jar
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar,frmicons.jar
5. Edit/update Registry.dat file:
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\forms\registry\oracle\forms\registry\Registry.dat
1
2
default.icons.iconpath=icons/
default.icons.iconextension=gif
At this point your icons should work normally, but if you get a security check of Java for gif files then proceed to the next step to fix this. TIP: May need to restart the weblogic/forms server for changes to take effect.
6. Sign your jar file with oracles sign_webutil.bat sign-tool.
path = c:\Oracle\Middleware\asinst_1\bin\sign_webutil.bat
Firstly, you need to edit the sign_webutil.bat as follows:
1
2
3
SET KEYSTORE_PASSWORD=my_password
SET JAR_KEY=webutil2 # will need to change for every run
SET JAR_KEY_PASSWORD=my_password
Secondly, set the environment path and finally run the command:
1
2
3
set path=c:\Oracle\Middleware\as_1\jdk\bin
cd c:\Oracle\Middleware\asinst_1\bin\
sign_webutil c:\Oracle\Middleware\as_1\forms\java\my_icons.jar
This will create your signed jar file. Once initialized from the web-app it should ask the user to “Trust” the certificate and never prompt again.
Other issues you may encounter and may need to edit/update the following files/registry entries as well:
formsweb.cfg
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\formsweb.cfg
1
2
3
4
5
6
7
8
9
10
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=codebase
# Forms applet archive setting for other clients (Sun Java Plugin, ...etc)
archive=frmall.jar, my_icons.jar
...or
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar, my_icons.jar
Registry.dat
path = c:\Oracle\Middleware\user_projects\domains\<my_domain>\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.1\config\forms\registry\oracle\forms\registry\Registry.dat
1
2
default.icons.iconpath=/forms/java
default.icons.iconextension=gif
Registry entries:
1
2
UI_ICON:<path_to_icons_dir>
UI_ICON_EXTENSION: "gif": ".gif" "ico": ".ico"
Credits and further information can be tracked for icons issue here and for jar file creation here.
Hope this will help.

Some .htm file not displaying in Topic List, but displaying in RH11 folder

Hi All,
We are running a project using RH 11, team consist of 3 person (include me)
But we have problem with many .htm file from my 1st coworker, file not displaying in Topic List in my Robohelp and 2nd coworker.
Although we already get the latest file again and again
But .htm file displaying in all our RH11 folder.
In my 1st coworker RH, all file displaying in Topic List also RH11 folder, but when file generated then
Many files from 1st coworker, hyperlink is not working well (broken link / file not found)
Does anyone have experience about this problem
Thanks

First of all, make sure you do not have the following files in source control: .cpd, .pss, .ldb.
These files contain local information that can cause problems when in source control.
Then try this:
Everyone deletes the .cpd file.
Everyone gets the latest files for the whole project from source control.
Open the project.
Does everything now display correctly?
If yes, you need to make sure you delete the cpd file before opening the project each day, and also during the day if you know a co-worker has made changes that you need. This file is a database which includes a list of all the files Robohelp knows about. When other people are adding and removing files, this information no longer matches properly. I recommend doing a Get Latest in these situations as well, just to make sure Robohelp can find the correct information.
If you are still not seeing the correct files repeat the above process, but at step 2, pick the options to Overwrite local files. I can't say where you will see these options - they may be two checkboxes in a dialog box when you select Get Latest - it will depend on your source control application.
Hope this helps.

Files not displaying in list view?

I recently upgraded my MacPro (early 2008 8core) from Snow Leopard (10.6.8) to Lion.
At first i wanted to do a fresh install on my machine but soon realised it wasnt possible to import old accounts from another internal drive so i opted to upgrade the system instead.
After doing so I was faced with an odd problem of files not displaying in my finder windows when switching through internal drives or changing from 'file view' to 'list view' or 'column view' etc...
The attached screenshots were taken in sequence youll also note that the path bar & top window name dont update either.
The relevant drives are in healthy condition with several tests run over them to ensure their healthy(Disk Utility & Drive Genius). I have also run permissions repair, and a utility to empty cahces etc (OnyX). From what i can see its possibly something to do with the Finder not updating or refreshing the window? The issue seems to be isolated to the drives however intermittently the problem exists deeper into the directory on 'TerraTank' Volume.
The finder also crashes semi-frequently and the problem seems to dispaear for a while and revealing the contents of these volumes for a few mins.
I have also checked activity monitor to see if any particular process was going haywire and all seemed relativly normal.
Has anyone else experienced this problem?
Regards,
JP

Onyx may be causing problems. Don't use it on a non-backed up system, as cleaning caches may damage them, and make things not work. Make sure your Spotlight indexes all drives you wish to be searchable. Go to Apple menu -> System Preferences -> Spotlight and add each hard drive to the Privacy section, and then remove it again. Then click on the Spotlight menu every half hour to see when it stops saying that it is indexing. It might take a few hours. But once done, it should be fixed.

Versioing: CVS Status not displaying new repository files

I did some quick searches and did not find this in the forum. Hopefully it is not a duplicate. If so, please point me to the original thread.
We have a multi-developer project underway with Creator. We are using CVS for the shared source repository. When one developer checks in a new file and other developer's use the CVS Status option, the new files do not display as 'Needs Checkout'. Of course, any files the user already has checked out display with the appropriate status but new repository files are missing.
Since we use CVS extensively, right now the developers communicate the new files and then check them out via command line CVS. We have the IDE set in 'expert' mode, etc.
Is this a know bug or is there some setting for the IDE to get it to display files with status 'Needs Checkout' from the cvs repository?

As per the documentation at:
http://ximbiot.com/cvs/manual/cvs-1.11.22/cvs_10.html
Based on what operations you have performed on a checked out file, and what operations others have performed to that file in the repository, one can classify a file in a number of states. The states, as reported by the status command, are:
Needs Checkout
Someone else has committed a newer revision to the repository. The name is slightly misleading; you will ordinarily use update rather than checkout to get that newer revision.
...Thus the 'cvs status' command works only on local files and 'Needs Checkout', from cvs documentation itself, is a misnomer and is really more like 'Needs Update'.
In Creator (and NetBeans), the nodes on the cvs explorer actually map to physical files and thus do not display nodes for files that may only be in the server. But you do raise an interesting question though; creator could display virtual nodes for files not in local workspace thereby providing a preview before actual checkout...

.nef files not displayed in my content window!

.nef files not displayed in my content window. I just want to work, not screw around fixing thing. How come the .nef files won't display anymore? The new .nef files don't display.
Thanks for your help.
--max

Well, I'm afraid I'm not going to be a lot of help. From what I see, if everything is installed correctly it should be working. I know that there has been a few challenges associated with Vista, but I don't know enough about that aspect to really comment. I'm still using Windows XP.
As far as Camera Raw is concerned, there have been four updates since CS3 was released. If you haven't done any updates you are probably in for a pleasant surprise. New controls have been added that most people have found to be quite valuable. The most current version of Camera Raw is 4.3.1. The first thing I would suggest is for you to download that update and get it installed and see it that makes a difference.
I know you indicated that you don't want to have to do a lot of fine tuning of the program. But Adobe Camera Raw (ACR) is updated frequently, and you always want to make sure you have the most current version. If the new version of ACR doesn't resolve your issues the problem "might" be related to Vista. And I'm afraid I cannot help you with that at all.

Word 2003 will not import a .PSD file

Using PSE5
To my surprise, Office/Word 2003 will not import a .PSD file created by PSE5. I am talking about a simple, Insert, Picture, From File... into an existing document.
Is there a way to make .PSD files compatible with Word? If not, what is the best file format to save in from PSE5 to use with Office?
Additionally, does anyone have a URL that explains the pros/cons of the various file formats (like where they are best used, etc.)?
Thanks!
Bob

I would be surprised if MS Word could handle proprietary formats like PSD. As Ken says, convert to JPEG's. That works fine. I have written many travelogues in Word with JPEG images.

LaserJet Pro Scans, prints test page but will not print from a file

I installed a LaserJet Pro200 MFP M276nw on my wife's Toshiba Satellite (Windows 7 64Bit OS) laptop yesterday (Printer is brand new out of the box). I installed with a wireless connection. It will print a test page and also scan wirelessly but will not print from a file i.e. a PDF. I installed it on my HP Probook this morning and it works fine. Any suggestions would be appreciated. The thought of paying Geek Squad 75 bucks rubs me the wrong way, especially since i just paid them 100 for an extended warranty. Thanks!

Welcome to the HP Forums JBottensek,
I see by your post that the printer won't print a PDF document from the one computer.
I can help you with this issue.
I have provided a document to go through the steps which should resolve this issue for not being able to print PDF documents. Cannot Print PDFs from Adobe Reader.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I have some mp3 files not purchased from itunes on my ipod nano; recently got a new laptop - how can i transfer now those mp3 to itunes?

i try to transfer mp3 files; not purchased from itunes, from my ipod nano to my new laptop/itunes/itouch. i dont have the original files/cd;s anymore and no backup! can somebody help please

http://support.apple.com/kb/HT1329 How to use your iPod to move your music to a new computer

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

FatalInternalException The metadata for type "XYZ" did not come from a file,.....

Hy !
Did KODO have Problems if there is a mix of jdo metadata files in
build.dir and in external jar's while registering a Schema with the
MappingToolTask ?
We extracting all *.jdo files from additional jars to a metadata dir and
also copying all *.jdo files from the current build.dir, because KODO
only supports a single Fileset for the Metadatafiles.
The Ant Schema Task looks like:
<target name="schema-create-kodo" depends="init-kodo-schematool">
     <echo message="Schema Create for KODO"/>
     <taskdef name="kodo-schematool"
          classname="kodo.jdbc.ant.MappingToolTask"
          classpathRef="jdo.schematool.class.path"/>
     <kodo-schematool action="refresh">
     <config propertiesFile="${zeus.persistence.jdo.properties}"/>
     <fileset dir="${jdo.metadata.dir}">
          <include name="**/*.jdo" />
     </fileset>
     <classpath>
          <pathelement path="${compile.project.class.path}"/>
     </classpath>
     </kodo-schematool>
</target>
jdo.schematool.class.path: is the Path for the KODO Schematool
zeus.persistence.jdo.properties: ist the kodo.properties file
jdo.metadata.dir: is the dir with all metadatafiles
compile.project.class.path: is the classpath including a build.dir with
class files + metadatfiles and differnet additional jar files containing
also enhanced classes with corresponding metadata files
and that fails with:
[kodo-schematool] kodo.util.FatalInternalException: The metadata for
type "class com.wuerth.phoenix.bcserver.base.versan
t.PCapacityStruct" did not come from a file, and therefore we cannot
determine where to place the corresponding mapping
information. If you are using metadata from a jar or other resource,
you should use one of the other available mapping
factories.
com.wuerth.phoenix.bcserver.base.versant.PCapacityStruct comes from a
jar which also contains a metadatafile.
We are wondering because if we exlicit give a different metadata file
via a fileset the Schematool should ignore the other Metadata files
inside the jar + build.dir !?
mfg
Christian

The only Apple computers that have a Mag Safe connector are MacBook laptops (MacBook, MacBook Pro and MacBook Air).
The Mac mini 2010 and 2011 models have a standard power connector, I believe it is called an IEC C7 connector. You can see a picture of the back of the Mac mini here http://www.apple.com/macmini/design.html
Older Mac mini models prior to 2010 have a proprietary connector. While the following page is for a very old PowerPC Mac mini the connector is the same on early Intel Mac mini models as well. See http://support.apple.com/kb/HT3019

Flash files not displaying in Firefox, Safari, and Opera. Most recent Shockwave installed, private b

Flash files not displaying in Firefox, Safari, and Opera. Most recent Shockwave installed, private browsing active in Firefox? Works perfectly in Chrome and Internet Explorer. HELP!!!!

I suppose it would have helped if you knew what it was supposed to look like! I'm using Shockwave Flash 11.7.700.169 and the version of Firefox I'm on is 20.0
When you see it in Firefox - do the thumbnail populate the grid? See attached populated and un-populated.
Populated grid is with Chrome.
Thanks!
Thanks in advance!

Word 2007 file not displaying from CHM file link

Similar Messages

Maybe you are looking for