Word 2010 "An error occured and this feature is no longer functioning properly" after sequencing in App-V 4.6 SP3

Hi all,
I've got a very frustrating one at the moment - I'm trying to sequence Office 2010 Pro Plus, and am having real issues with word throwing the error above. I've tried sequencing both 'manually' using the guidance
here and also using the available Package Accelerator and get exactly the same problem using either method. On launch of Word 2010 in the 'Streaming' phase I throws the aforementioned
error. I have read
this post and have seen that Office must be installed to a unique location in the sequencing drive - I am using 'A:\Office 2010 Professional Plus'. I'm using App-V 4.6 SP3 (for RDS), but I've tried with the SP1 and SP2 sequencer to see if that made a difference
which it didn't.
If anyone has any suggestions for anything to try I'd be very grateful.
Many Thanks,
James

Hi Steve, thanks for your reply.
On the sequencer I used the following flags as two separate commands when installing manually and combined as one when using the Accelerator Package as recommended;
Licensing Flags: PROPLUS=1 VISIOPRO=1 PROJECTPRO=1 SPD=1
Virtual Proxies: ADDDEFAULT=Click2runOneNoteProxy,Click2runOutlookProxies,Click2runWDSProxy,Click2runOWSSuppProxies PACKAGEGUID={F453A898-EFDC-40E2-8C64-C2FD7AA4D4E9} PACKAGEVERSION=14.0.4763.1000 OUTLOOKNAME="Microsoft Outlook 2010" ONENOTENAME="Microsoft
OneNote 2010" MAPISERVER="Microsoft Virtual Office Simple Mapi Proxy Server" VIRTUALSEARCHHOST="Search MAPI Protocol Handler Host" MLCFG32CPL="Virtual Mail Control Panel Applet" OWSSUPPServer="Microsoft SharePoint Client Support Manager"
I haven't even got as far as the client yet unfortunately as I'm getting this error before I even leave the Sequencing environment!
And Nicke, thank you also for your comment. I have tried on a new sequencing VM and get exactly the same results. I haven't quite followed your guide to the letter (Haven't installed some of the software you do) but I have followed the App-V Sequencing Guide
from Microsoft and I must say I haven't had any issues with any other applications I've sequenced so far.
Many thanks.

Similar Messages

I no longer have the ability to use my IPad at work as a digital picture frame after the upgrade. This was the main reason I bought a second iPad for my business. Apparently this feature is no longer available. Is there an app that would work the same?

Is there an app that will act as a digital picture frame ( slide show ) when in screen saver mode? IOS7 no longer has this feature.this is very upsetting as it is one of the main reasons I bought an iPad for my store.

You still have the option of using the slideshow feature in the Photos app. It's not in the lock screen anymore, but it is stll available there.

After downloading i get "download error" message and "creative download is no longer functioning" then tells me to uninstall and download again, the same thing happens.

as per title!

Trentl44713328 do your current User account has sufficient permissions to write and modify the Users/<UserName>Library/Application Support/Adobe/ folder? You can find details on how to adjust file permissions at Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5.

After installing Mt.Lion on my 27" iMac (2010), my copy/paste and move files would no longer function after a few minutes of use. I re-opened in Safe Mode and found everything okay, so I was told it was a bad extension. Now what do I do?

I have tried to look for an extension like Air Print Activator, which I tried and ignored. I thought it might have some timing method that would stop my copying and pasting and moving files after a minutes ot two. So I re-installed the latest version and "uninstalled" it, hoping it would then remove an errant extension. But that didn't help. It seemed to start when I first tried out Mail and moving new emails into their mailboxes after reading. I tried to figure out how to do a Clean Install, too, but it would not allow me to "move" the InstallESD.dmg to a USB disk, "resource busy". Everyway I turn, I'm blocked from carrying out a method of finding the culprit, short of starting from scratch -- but losing years and years of mail, files, receipts, etc. It's just too much to sacrifice. I have no idea what to do next, since I have no idea what extension is causing it or how to isolate and destroy it. Any suggestion would be much appreciated.

You can try repairing the boot drive, Since you are running OS 10.6.8 you will need the OS DVD. Do you have it?
Please post back if you do, and need directions on how to do the disk repair.

Apple TV and Home Sharing "An error occurred loading this content"

Recently I moved and switched my homeshare library from my Mac to a Window8 PC. I'm running the same network equipent, but the bandwidth to the internet was less in the new place then the old one so I wanted to store more on the PC. My bandwidth to the internet is slow at times so I like to download to my PC and watch the shows on my appletv. I thought it might be a Windows 8 issue, but I powered up my Mac Pro (2008) again and it has the same problem. I thought it might be a WIFI issue so I ran network wires, same issue. The only new thing I can think that happened was the apple tvs recently took a SW update, I'm not sure what version they had before. (tend not too look at versions when things are working).
What I know:
All the shows play fine when I stream. (they can just take a 5-10m to start due to internet bandwidth, but they play fine).
Some shows play fine with homesharing (I have found no common thread between ones that do and don't).
All shows play fine on my PC in iTunes
Between my 2 AppleTvs (both running version 6.1) It is consistent which shows will play in home sharing and which will not. There have been a couple shows that will play on one but not the other and a couple shows that won't play one day but will the next day.
I have tried playing a show that will not play over and over for 10m. The status remains the same.
If the show has an option to resume playing or start from beginning. I'll be asked "Resume/Start over" first then be told "An error occurred loading this content"
The first time I try and play a show it takes 5-10 seconds to give me an error, repeat attempts typically take < 1 second to show the error.
Most shows on both my AppleTVs with home sharing return an error "An error occurred loading this content". I've tried running network wires, rebooting, holding menu and shift down to reboot, pulling power. I have examined the files that play versus ones that do not and they all appear to be in good working order. As an example. Episode 1, Season 2 of Big bang theroy plays fine, but Eposodes 2-5 don't, but then Episodes 6-8 do play ok. I find the same problem with Movies and Music Videos.
Setup Facts:
Asus Wireless Router is connected to my DSL modem into the Ausus router WAN port. The ASUS router creates a network 192.168.1.X my DSL has a 192.168.0.1 IP address.
On the AppleTV it has a valid IP address and I'm fairly confident the network is ok since I have NO issues streaming any shows from the internet via Music, TV shows, Movies, Hulu, Netflicks, etc.
PC is running Windows 8 and I've disabled all power reduction settings to be always ON. (Again some shows play fine, the ones that play seem to always play). Running itunes version 11.1.5.5
All the shows are ones I've downloaded iTunes. None of the shows are handbraked home videos.
AppleTV version 6.1 for both AppleTVs.
What I've tried:
Power Clearing Devices
Switching locations of Apple TV with different TVs
Trying Mac Pro and Windows 8 Home Shares
WiFi and networked
Changing HDMI Cables.
Every TV I have, 1: Sony (new), 1 LG (about 2 yers old), 1 Samsung (about 5 years old).
Any Adivce?

I have it working now.. BUT I still don't have 100% on both appleTVs. I'd guess it's closer to 99% (which is a huge improvement).
What I've done since:
First I verified that I had open on my firewall the correct ports. I use AVG Internet security so verified I had it setup ok. (this was after I tried a few times with it off). (this produced no improvement)
TCP
direction both ways
local ports 3689
remove port(s): all
remote addresses:all
UDP
direction both ways
local ports 5353
remove port(s): all
remote addresses:all
Might have been over kill, but I assigned both AppleTVs a fixed IP 192.168.0.200 and 201. by their MAC address on my router. I then added them to the whitelist in AVG Internet Security
I saved changes and rebooted my PC, AppleTVs and PCs
It still didn't work. (I described the above because when I tried removing them no shows played, so more an FYI if 100% of your shows don't play).
I then downloaded itunes (11.5) same version I was running.
I used 7-zip (winrar should work too) to unzip the file iTunes64Setup.exe into a folder iTunes64Setup. This is important, which I'll explain in the next steps.
I then ran the iTunes64Setup.exe and selected repair.
it then told me it could not find iTunes64.msi. which I gave it the directory iTunes64Setup that I had expanded the iTunes64Setup.exe into that directory. (Really apple??? This one anoyed me that it was in the EXE but I had to manually expand it and put it somewhere for you to refind )
It completed the setup and I rebooted my PCs and AppleTVs again.
I went to a show that was consistently not playing and it worked on both TVs. I'd say 99% are working fine now. What's special about the remaining shows I do not know. If the file was corrupt I would not expect to be able to play it on another appletv.
The few files that don't play:
I'm now convienced that my network is fine. with 99% playing ok. If it was an intermitent problem with the network I'd expect that re-attempts to play the shows would produce different outcomes.
What have I tried:
I've done a factory reinstall of the appleTV. (my advise is don't waste you time, it did nothing except eat up 30m of my time watching redownload and then entering passwords).
I've tried deleting the shows that don't play (which do play on my computer) and redownloading them (same outcome) (again, my advice would be don't waste your time). When I did a check of the files they redownloaded identically with only the creation dates different.
Open to move things to try. Any ideas anyone?

HT201210 The iPod "iPod" could not be restored. An unknown error occurred (1).This is my Ipod 32 GB, which is out of warranty and is 1G-A1213 and had gone kaput, after having issues with iTunes Software as it was not able to run Music on my IPod when conn

The iPod "iPod" could not be restored. An unknown error occurred (1).This is my Ipod 32 GB, which is out of warranty and is 1G-A1213 and had gone kaput, after having issues with iTunes Software as it was not able to run Music on my IPod when connected.
I have wasted my precious 2 days and nights and am lost all my hope...APPEAL TO ALL GEEKS TO RESOLVE MY ISSUE ON HUMANITARIAN GROUNDS ATLEAST WITH SOME VALID TIME OF YOURS.
All mails can be sent to [email protected]
Restore of Ipod back up is present...but is not getting restored due to some iTunes issue with playing my music files.It says restoring and extracts but failes in 1 min with the said error.

Other users and reported error 1 but I have not seen a solution.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Why won't my videos play? They start on the device that they are on, then stop and I get an error message...An error occured loading this content.

Why won't my videos play? They start on the device that they are on, then stop and I get an error message...An error occured loading this content. This comes up on all of my computers. I reset the Apple TV to Factory Settings and still get the same message.

Hi There,
I had the same problem took me several hours to try and sort it out but nothing worked.
I then went to the following apple link
http://support.apple.com/kb/TS5376
Follow everything to a T and you will get the use of your Itunes again.
Hope this helps. Good luck (And remember to breath lol )

An error occurred loading this content when we hit play. We have been getting it for 3 days. Today I bought another rental and we are getting the same error. We have tried rebooting and also resetting. We are unable to get the movie. The Netflix is good.

An error occurred loading this content try again later. This happens when we hit play after we rented a movie. This has been going on for 3 days

I have the same problem. Cant do the software update and can't download a Rented movie.
Viewing Previews of movies and all else seem fine.

I rented a movie The King's Speech. But I couldn't download it because I kept receiving an error message saying "An error occurred loading this content. Try again later." However, I could rent other movie and watch it. Young

I rented a movie The King's Speech. But I couldn't download it because of an error message saying "An error occurred loading this content. Try again later. I tried it several times, but I still get the same error message. I tried other movie and could download and watched it. Therefore, I assume that only this movie makes trouble. Am I right? If I am right, should I ask a refund to Apple for this movie?

I posted the same sort of problem in the thread
https://discussions.apple.com/message/15562522#15562522
I noticed in my instance that it is HD content that is giving me the same problem, but Standard Definition (SD) content downloads and plays no problem.
Would this be the same with you? Have you been able to download a play an HD rented movie?

I am facing an issue " Denied connection per minute from one ip address" why this error occur and how to resolve it? is it really harmful for my TMG Server or not??

I am facing an issue " Denied connection per minute from one ip address" why this error occur and how to resolve it? is it really harmful for my TMG Server or not??
Error Description:
The number of denied connections from the source IP address 10.0.0.X exceeded the configured limit. This may indicate that the host is infected or is attempting an attack on the Forefront TMG computer.
electrifying

Hi,
this may be a false/positive log record.
First check the services and applications on the effecting machine (NETSTAT -ANO) to see which connections the machine has established or tries to establish.
Check the machine against viruses and spyware.
if you don't find any viruses / spyware or "mysterious" connections, create a connection exception limit in the flood mitigation settings on your TMG Server:
http://www.isaserver.org/articles-tutorials/configuration-security/TMG-Firewall-Flood-Mitigation-Part1.html
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

TS3623 "An error occurred loading this content..try again later" is the message that I get when using my Apple TV remote. I click on Breaking Bad; then I click on an episode and get the message which I just quoted. Is this a Netflix problem?

Why am I getting the following message when using my Apple TV remote on Netflix: "An error occurred loading this content....try again later?

Make sure DNS is set to ISPs (settings - general - network - DNS should be set to automatic). Trey rebooting ATV, and router. Make sure all are up to date.

Can't play rented movies. They appear to download OK and the timer accurately reports days remaining to watch. But whenever I try to play the movie I get this message, "An error occurred loading this content. Try again later."

Can't play rented movies. They appear to download OK and the timer accurately reports days remaining to watch. But whenever I try to play the movie I get this message, "An error occurred loading this content. Try again later.". Have been using the Apple TV for 2 weeks and everything else seems to work OK. The Apple TV reports its SW is up to date. I've tried this with two movies rented frim iTunes directly from the Apple TV.

If after you download the movie, you navigate away and do something else with your Apple TV the content you have downloaded will be overwritten and you'll need to download it again. It's a pain in the neck for many who have slow downloads but it's something that comes with using volatile memory rather than a hard drive for storage.
Perhaps you're not doing this, but I thought it worth mentioning.

Help - Receive message "an error occurred printing this document" when using airport express and Ipad

Hi, I am trying to set up an airport express hub to work with a Star tsp100 receipt printer and IPad 2. The IPad is being used to accept credit card payments and I was hoping to print receipts out wirelessly using the airport express and receipt printer. I checked to make sure the airport express has the latest firmware and it does. The IPad software is also updated to the latest 7.1. I then connected the Airport express and IPad and the network setup with no problems. I connected the receipt printer to the airport express using the USB slot available. While the printer comes up as available, when I attempt to print something, I get the error message "An error occurred printing this document" and I can cancel or Try again. No matter how many times I try, I continue to get this message and I lost as to the cause. When I disconnect and reconnect, another instance of the printer appears, but receive the same cryptic error message when I try to print. Totally lost, please help

Hi kelston3,
In order to print from an iPad you will need to use a printer that is compatible with AirPrint, which is described in the following article -
About AirPrint
http://support.apple.com/kb/HT4356
AirPrint printers must be wireless on your network - not connected via USB to the base station. There is a list of printers that are known to be compatible with AirPrint in the article.
Thanks for using Apple Support Communities.
Best,
Brett L

HT201406 I was printing and printer jammed. iPad gives the command; an error occurred printing this document Cancel Try Again - no response to either command and the iPad will not let me shut down.

I was printing docs from my iPad and the printer jammed. iPad's screen now shows: an error occured printing this document - Cancel Try Again - the touch screen will not respond to any command. Cannot turn it off, cannot cancel and cannot try again. I've turned the printer off and restarted it.

Try a reset. Nothing is lost
Reset: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
BTW, you posted in the iPod topuch forum.

I try to send emails after I have recieved. They are hotmail accounts. message says"cannot send mail and error occurred delivering this message. I have tried deleting and restarting. I have tried shutting phone down completely and restarting. no help...

I am trying to send emails via a hotmail account on my i phone 5 and get the following message despite recieving e mails. "cannot send mail an error occurred delivering this message"... i have tried to restart phone to no avail. I have tried to delete and re input account to no avail. I need help

Hello lclaunch22
You may need to validate the account with Hotmail. When logged in to the Hotmail account on a computer, there are instructions on how to do this.
iOS: Setting up Hotmail, Outlook, Live, or MSN email accounts
http://support.apple.com/kb/ht1694
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Word 2010 "An error occured and this feature is no longer functioning properly" after sequencing in App-V 4.6 SP3

Similar Messages

Maybe you are looking for