Word 2010 does not input in Russian when language is switched from English to Russian.

I have Word 2010 with Russian language pack.
When I switch language from English to Russian Word does not allow any input of Russian symbols until I press any symbol from English keyboard like any number, space or backspace. After that I can input Russian symbols.
This does not happen when I switch from Russian to English.
This does not happen in any other Office program (like Excel).
This does not happen with any other program like notepad or wordpad.

Another thing I've found out is that along with Standard PS/2 Keyboard I have installed HID Keyboard Device.
Can it be somehow related to my issue?
Hi,
How about on the system without this issue? Do you have HID Keyboard Device installed on it too?
You can try to install the HID Keyboard Device on the system with no issue, then check if the problem will start to occur. If the issue occurs after the installation of the device, the issue is probably caused by a conflict caused by the device.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Similar Messages

I would like to buy iphone4$ in Canada for my brother who lives in Russia. is it possible to change language on iphone from English to Russian, and will this phone work in Russia?

i would like to buy iphone4$ in Canada for my brother who lives in Russia. is it possible to change language on iphone from English to Russian, and will this phone work in Russia?

Language change is no problem, you can switch to anything in the tech specs.
http://www.apple.com/iphone/specs.html

Object does not match target type when raising an event from c# to VB6

I have a c# .net DLL that I use from a VB6 app. It exposes an event,
and the VB6 app is sinking it.
The VB6 app is receiving the event, as long as it is raised from the
main thread of the .net DLL.
I have an aync task being handled inside the DLL (delegate BeginInvoke). Any
attempt to raise the event from within that thread casuses the reported
error, even from within the AsyncCallback function, when the thread is ending.
I noticed that the delegate for the event is not declared inside the
interface. It's in that module, but above the interface definition:
    [ComVisible(false)]
    public delegate void LoggingEventHandler( string logData );
The event is declared in the class itself as:
    public class Processor : _Processor
        public event LoggingEventHandler        LogNotification;
Finally, to raise the event:
if ( this.Completed != null )
    this.Completed( true );
If I open the tlb with OLEVIEW, I can see the public event just fine. Of course, I expected to, as it's working up until the helper thread kicks in.
Now for the REAL WIERD PART! This DOES work on several servers that have
been in production for months. It's just this one server that it won't work
on. Same code. Resinstalled/registered it 1,000 times. It took me a while to
find that an error was even occuring, since it was being raised in the
seperate thread. In other words, I'm receiving the event just fine on a series of servers. This is a new machine we're trying to bring online. I suspect it's environmental, but I can't figure it out.
I don't understand why the publisher would be expecting a certain type of
subscriber in the first place... unless the error is really triggered by the client when the event reaches it. I've put logging into the client, though, and the first line of code inside the event is not being executed.
For the VB6 app, I reference the tlb file that is automatically created when
I compile (Interop is checked). I unregistered and re-registered the tlb on
the server. I regasm'd the dll itself. All dlls are in the same folder - not
in the GAC.
The stack trace is as follows:
   at System.RuntimeType.InvokeDispMethod(String name, BindingFlags
invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32
culture, String[] namedParameters)
   at System.RuntimeType.InvokeMember(String name, BindingFlags invokeAttr,
Binder binder, Object target, Object[] args, ParameterModifier[] modifiers,
CultureInfo culture, String[] namedParameters)
   at System.RuntimeType.ForwardCallToInvokeMember(String memberName,
BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData&
msgData)
   at HPFS.Queue.IProcessorEvents.LogNotification(String logData))

This is driving me nuts!
I sure would appreciate any suggestions.
I got this working on one of the two machines. The other machine had some other issues, so I had it re-imaged. It's been so long since I fixed the first one, that I can't remember exactly how I did it. Plus, I did so many things to it over two weeks, that I never really felt confident, anyway. But ... I could *swear* that the last thing I did back then to get this event to flow was to re-register the DLL's TLB.
So ... This is win 2k with FW 1.1 + SP1.
Completed is the delagate I'm trying to invoke.
this.Completed.Target.GetType().Name = "__comobject"
I've tried everything. Unregistered the .tlb. Unregistered the .net DLL. Verified that the app completely failed while unregistered. Created the TLB using RegAsm /tlb syntax.
I tried using CLR SPY. It registers nothing. It only lets me pick an EXE. This is a DLL tring to raise to an EXE.
I've looked at the TLB in OLE VIEW and I just don't know what I'm looking at.
Is there any other tool or technique I can use to audit/monitor/trap this? .net is giving me *** for details about what's failing. I wish I could somehow debug into exactly what it's trying to do and get more details on the failure.
Here's the error I'm getting:
(Code -1) Object does not match target type.<Source:mscorlib>(Stack:    at System.RuntimeType.InvokeDispMethod(String name, BindingFlags invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32 culture, String[] namedParameters)
   at System.RuntimeType.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParameters)
   at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
   at HPFS.Queue.IProcessorEvents.Completed(Boolean success)
   at HPFS.Queue.Processor.RequestDone())
Processor = the DLL I'm trying to raise the event from.
IProcessor = the event interface that's exposed through COM.

Format Painter in Word 2010 does not hold all formatting for text, anything change?

I have been using the Format Painter tool since 2003. In the 2010 version in Word, I can duplicate what seems to be a bug. I have a line of text that a few words are blue and bolded. I wanted to copy that formating, so I click in the word (or select a
portion of text -- works the same either way) and then paint over the text to be modified. The text I had selected was Calibri, bold and blue, my resulting text was Times, and blue...it lost the bolding and the font somehow. Has the tool changed in 2010?

"shevaun" wrote in message
news:[email protected]...
I have the exact same problem. I'm finishing a document someone else created with wacky fonts/sizes/underlines/bullets/hanging indents etc all over the place. I selected all, made it Arial size 11, set the line spacing to 1.5 and removed any underlines.
I went into paragraph and set line spacing before and after to 0, and removed spaces between paragraphs of the same style.
As an example of random behaviour here is what just happened.
One piece of text is arial, 11, with a checkbox bullet. When I look at its style while it is highlighted, there is no style selected.
I use format painter to bring the top style down to the bottom one, and the bottom one changes to Times New Roman, 10, with the checkbox bullet and the new tab indent.
[---] I think format painter should apply a style, period. Forget the 'Normal' style of the document, because when I'm matching format styles, I want that style, not whatever the Normal style is set to.
The format painter only “records” paragraph formatting (including paragraph styles) if you select a whole paragraph. If you select multiple paragraphs, there might be conflicting settings, and the format painter can’t store all of the formatting.
When you are reformatting a whole document, the format painter is a less useful tool. Instead, do the following: Make a printout of the document for reference. Then apply Normal style to all paragraphs (Ctrl+Shift+N) and manually apply the appropriate
style to headings, lists, and any other paragraphs of your document. Modify styles to suit your needs.
Stefan Blom, Microsoft Word MVP

Portege 2010 does not boot - blank screen

Hi There
I need some help as my 2010 does not boot up. When I press the power button the power light comes on but I get nothing on the screen.
It was working when my brother was using it until the mouse froze and then he powered it off. He then powered it back on in which case only the power light came on with nothing on the screen.
The hard drive was clicking when it was working so I do have a gut feeling that the hard drive must have died and causing the laptop not to come back on as when I power it on I don't get no hard drive light or sound form the hard drive at all.
I don't even get anything on screen. Not even the red Toshiba boot sign. So that's worry in me as well.
Many Thanks, Jagz

Hi
I dont think its a HDD problem.
If the HDD would be dead you will get a message on the screen saying the notebook is not able to find a booting device.
If the Toshiba splash screen does not appear I think its something wrong with the motherboard. I assume the graphic card is dead. But to be 100% sure a check is needed.
In my opinion you should ask a service partner or an technician for an help.

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

When closing "Word" it does not fully close and I have to force close it to shut down my computer, any suggestions?

When closing "Word" it does not fully close and I have to force close it to shut down my computer, any suggestions?

Sounds like Word is corrupt, I would uninstall the app and then reinstall. Also there is a MS Office for Mac forum, you can find it at: Office for Mac Product Forums

Parked document 1000 700010042 2010 does not exist, Message no. FP076

Hi,
There is one Document which is not on tax return but made a entry in a GL account (VAT).
When I display document from FB03 for fiscal year 2010 the transaction code FB03 is diverting to FBV3 and giving error message : "Parked document 1000 700010042 2010 does not exist" "Message no. FP076"
I also checked the tables "BSEG" & "BKPF" where this document is visible to me also I checked the GL line items from FBL3N for the VAT GL where this document is showing in line items report, but when i double clik to display this documents again am getting screen of FBV3 with the same error message.
can any one let me know what could be the problem? and how to resolve this issue?
Many thanks in advance.
Regards,
Abdul

Hi Venkata,
Thanks for the information....
Addition to the above information ... there are 3 line items are there in this document 1 - K (Vendor), 2 - S (GL).
The strange thing I can see is against 1st line item (K-Vendor) there is a clearing document updated.
So if there is a clearing document against vendor line that means this document is no more in parking ...
I am not sure why system is performing like this...
Can anyone help me on this ....
Thanks in advance.
Regards,
Abdul

Word substitution does not work on texts

Word substitution does not work when texting. It's fine in all other applications. Not even the pre defined substitutions like "mypin" works within text.

yoyongsc wrote:
Mine doesn't work in all applications, bbm, text, email, etc.
Verry odd! My Word Sub works well in all of those you've listed.
It does not work in commenting on BBM group pictures and in some BBM Channel comments... works every where else.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Word file does not open automatically on export

When I click on the Export to Word icon from the toolbar the file exports to C:\Program Files\SAP Business One\Worddocs\<company>\<bp ID>\<filename.doc> but it doesn not open automatically as it does in Excel.
I can open the file once exported but I have to go into that path to do so. Is there something I can do to have it open automatically? MS Word does not even come up when the file is exported. I'm using MS Office 2007 and SAP Business One 8.8 PL 13.

Hi Alan.......
i guess what you need to do is Go to Administration> System Initialization> Print Preferences
Select the Document say Invoice on Per Tab and tick on Export to MS-Word.
Once you add the AR Invoice it will be exported to MS Word automatically.......
Hope this will solve your problem.....
Regards,
Rahul

Right click with mouse in Word 2013 does not give the list with translate and synonyms etc

since i upgraded to windows 8.1 right click on words in word 2013 does not open the regular list where you can tap on synonyms and translate.
it does work if i touch the screen.
i moved to mouse mode but it does not help
can anyone help...
i am starting to hate windows 8.1 and word 2013 because of this feature not working

Hi
I have tested in my computer and it worked well.
Normally when we type a wrong spelling, right clicking the word does not give a list with translate and synonyms.
Check to make sure your spelling is right.
if the issue persists, Start Word in safe mode to check the issue:Hold "Ctrl" key and click into the program.
It is also recommended that you do a repair for your Office suites in
Control panel>Program and features>Office>Change>Repair
Thanks
Tylor Wang
TechNet Community Support

Outlook 2010 does not receive rss messages

Hi,I have recently uninstalled a freeware VPN.
After that outlook 2010 does not receive messages (bizarrely firefox works fine, but internet explorer does not)!
I keep receiving error code: 0x800c0008
I made sure that it is properly uninstalled.
Thank you for your help!

Hi,
Have you subscribed any RSS Feeds before? Please go to File > Info > Account settings > "RSS Feeds" Tab and check if all the feeds are healthy (connection successful?). Remove them to check
whether you would still receive the error code anymore.
More information: http://office.microsoft.com/en-001/outlook-help/unsubscribe-from-an-rss-feed-HA010024271.aspx
The following KB could help you solve your issue.
Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
http://support.microsoft.com/kb/813514
In addition, I would like to suggest you ask this in the Outlook Forums:
http://social.technet.microsoft.com/Forums/en/outlook/threads
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

The first row behind the words,Why does not be displayed?

The first row behind the words,Why does not be displayed?
The first line of why will automatically fill?
The File(IDcs6) [Link to know attack page removed by moderator]
Message was edited by: Peter Spier

Filedown has a nasty reputation in English-speaking countries - plenty of antivirus/antimalware apps block everything there by default, which is what Peter has done. It doesn't mean that your link is malicious, only that it's hosted somewhere that has been used to host malware in the past.
I'm pretty sure, Peter, that there aren't any nonbreaking spaces there, because I'd wager that there aren't any spaces there at all. It's justified text, and the reasons why it will or will not break are sometimes obscure when using composers that aren't the J composer. Chinese text is usually entirely free of spaces, except in certain circumstances, usually involving European language inserted into Chinese text. Sometimes, for reasons I don't understand, InDesign will simply treat Chinese as if it were English, and only break at spots permissible in Euro languages. That's not the case here - it obviously breaks between two Chinese glyphs, so something else is up here.
Which version of InDesign are you using? Are you keying the text directly into InDesign, or are you placing, or copying/pasting?
If you're using an English version of InDesign, I would suggest trying to save your Chinese text as raw text or RTF and File -> Place that. If you choose RTF, try to mark it with Chinese language in your RTF editor (Word?) if possible.
Is No Break applied anywhere in your text? You can check in the Story editor (Control/Command Y) to see what styles and formatting are applied.

Number range for trans./event type WA in year 2010 does not exist

Dear Sir,
when i used t-code mb1c to initiate the stock, it occured this error message 'Number range for trans./event type WA in year 2010 does not exist'. i've used t-codes(OBMT,FBN1,OBH2), but it still doesn't work. can you tell me how to solve this problem, please? thanks! the detail error messages as below:
Number range for trans./event type WA in year 2010 does not exist
Message no. M7562
Diagnosis
The number range for document number assignment has not been maintained in the year 2010 for the transaction/event type WA.
Procedure
Contact your system administrator.
If you are authorized to do so, do you want to check the number ranges for the
Material documents
Reservations?

Follow the below instruction as specified in note 370236.
Maintain the number range intervals in Transaction OMBT or in Transaction SNUM. For every interval of the previous year, there should exist an interval with a year specification that is larger than or equal to the current year.Then assign the interval to a number range group.
The attached analysis report 'ZNRIVCHECK' carries out the following check:
If the year and the document type are entered, the report checks whether an interval exists for the document type and for the year.
If the year is entered or the year and the number range object are entered, the program checks whether the intervals of the previous years exist for all of the year-dependent objects in the specified year.Check whether intervals are needed for all entries of the results list and whether the interval was assigned to the number range groups.
thanks
G. Lakshmipathi

I rented a movie and it downloaded but the movie skips and i can hear the words but the picture does not? and now the movie is gone from the library and i only rented it an hour ago? what do i do?

I rented a movie and it downloaded but the movie skips and i can hear the words but the picture does not? and now the movie is gone from the library and i only rented it an hour ago? what do i do?

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Word 2010 does not input in Russian when language is switched from English to Russian.

Similar Messages

Maybe you are looking for