Word 2011 in Lion, cannot insert multiple images, crashes...

Greetings all,
Having made the great switch to Lion last week, I have difficulty with Word '11. When trying to create a document with more than one picture, the program allows the first insertion, but thereafter it is not possible to add another. I have tried opening iPhoto and doing a copy/paste, however this causes a crash and the usual 'send error report'.
The only thing that works is if I close the document and quit word, restart and then I can add only one more image. Deep breath. Rpt. And so on.
Grateful for any suggestions,
D.

Dear coocooforcocoapuffs,
Thank you for your suggestions.
I have tried with the console open and got messages as follows:
7/26/11 4:55:54.979 PM Dock: kCGErrorIllegalArgument: CGSSetWindowListSystemAlpha: Failed
7/26/11 4:55:54.979 PM Dock: kCGErrorIllegalArgument: CGSSetWindowListSystemAlpha: Failed
7/26/11 4:56:53.096 PM Microsoft Word: NSOutlineView Warning: reloadData called while in the middle of doing a reloadData (break on NSLog to debug)
7/26/11 5:02:30.922 PM Microsoft Word: NSOutlineView Warning: reloadData called while in the middle of doing a reloadData (break on NSLog to debug)
The dragging & double-click doesn't work.
I tried inserting images from areas other than iPhoto, and this worked, as well as with various file types.
I also opened Pages and the whole process works fine.
Headscratcher, eh?
D.

Similar Messages

Cannot stamp multiple images anymore

running v 3.2.1 and I cannot stamp multiple images any more. I can lift and stamp one at a time but when I select to end and attempt to stamp it only stamps the last image in the batch. any help is appreciated!
Thanks Dave

Hello Dave,
Check if you have "Primary only" activated.
That looks like a case of "Primary only".
If you have set the "Primary only"-flag, any changes only apply to one image of the selection.
Uncheck the button with the "1" in a square above the film strip.
You can also deselect this option from the "Edit" menu.
Regards
Léonie

Insert multiple images

How to insert multiple images into html document ?
From the menu Insert > Image you can't choose more than 1 image... how strange is that ?!?

Well ... here's one way you can put 100 photos onto a page in DWCS4
First - be sure all photos are web ready - I had one straight from my camera and at 4+MB it was a bit TOO LARGE!)
Next - have them in a folder outside of DW and select them.
Next - drag them into Design View and drop them and answer all the popup screens
Like this:
Respond to the following:
And Picture One is there .... continue several hundred more times (though is goes pretty fast)
and now there are five ....
And in a browser -
And browser resized -
Hope this helps ..... But like Nancy says "Happy Clicking"

How to insert multiple images

How to insert multiple images in SQL/MySQL using servelet

donsankar wrote:
How to insert multiple images in SQL/MySQL using serveletuse a BLOB
are you sure you need to store images in the database?
why not store the image on the file system and store a link to the image file in the database
you really don't gain much putting images in the database

Inserting Multiple Images into oracle database using JDBC

I wanted to insert multiple images into database using JDBC by reading it from the file... and i am passing photos.txt(my text file) as an input parameter... I have inserted all the values into the database except for the image part... this is my content of photos.txt file and i have copied all the images into the folder
*" C:\\photos "*
*1,in1.jpg,108,19,in-n-out*
*2,in2.jpg,187,21,in-n-out*
*3,in3.jpg,308,41,in-n-out*
*4,in4.jpg,477,52,in-n-out*
*5,in5.jpg,530,50,in-n-out*
and i want to store in1.jpg,in2.jpg,in3.jpg,in4.jpg,in5.jpg into the oracle databse using JDBC.... i have tried a lot using BLOB column.... and i have created my table as
CREATE TABLE PHOTO(
ID NUMBER NOT NULL PRIMARY KEY ,
Name BLOB,
X DOUBLE PRECISION,
Y DOUBLE PRECISION,
Tags VARCHAR2(40)
try { // for restaurant System.out.println();System.out.println();System.out.println(); System.out.print(" Creating Statement for Photo...\n"); stmt2 = con.createStatement (); stmt2.executeUpdate("delete from PHOTO"); stmt2.executeUpdate("commit"); PreparedStatement stmt3 = con.prepareStatement ("INSERT INTO PHOTO VALUES (?, ?, ?, ?, ?)"); System.out.print(" Create FileReader Object for file: " + inputFileName1 + "...\n"); FileReader inputFileReader2 = new FileReader(inputFileName1); System.out.print(" Create BufferedReader Object for FileReader Object...\n"); BufferedReader inputStream2 = new BufferedReader(inputFileReader2); String inLine2 = null; String[] tokens; // String[] imageFilenames = {"c:\\photos\\in1.jpg","c:\\photos\\in2.jpg","c:\\photos\\in3.jpg","c:\\photos\\in4.jpg","c:\\photos\\in5.jpg", // "c:\\photos\\in6.jpg","c:\\photos\\in7.jpg","c:\\photos\\in8.jpg","c:\\photos\\in9.jpg","c:\\photos\\in10.jpg","c:\\photos\\arb1.jpg","c:\\photos\\arb2.jpg", // "c:\\photos\\arb3.jpg","c:\\photos\\arb4.jpg","c:\\photos\\arb5.jpg","c:\\photos\\den1.jpg","c:\\photos\\den2.jpg","c:\\photos\\den3.jpg", // "c:\\photos\\den4.jpg","c:\\photos\\den5.jpg","c:\\photos\\hop1.jpg","c:\\photos\\hop2.jpg","c:\\photos\\hop3.jpg","c:\\photos\\hop4.jpg","c:\\photos\\hop5.jpg"}; File file = new File("C:\\photos\\in1.jpg"); \\ ( Just for example ) FileInputStream fs = new FileInputStream(file); while ((inLine2 = inputStream2.readLine()) != null) { tokens= inLine2.split(","); st2 = new StringTokenizer(inLine2, DELIM); stmt3.setString(1, tokens[0]); stmt3.setBinaryStream(2, fs, (int)(file.length())); stmt3.setString(3, tokens[2]); stmt3.setString(4, tokens[3]); stmt3.setString(5, tokens[4]); stmt3.execute(); //execute the prepared statement stmt3.clearParameters();
As i am able to enter one image file by above code in1.jpg in to the oracle database.... but i am not able to insert all the image file in to the database.....do tell me what should i do.... and can you give me the example on the basis of the above code of mine...
do reply as soon as possible..

jwenting wrote:
that depends. Putting the images in BLOBs prevents the file locations stored in the database from getting out of synch with the filesystem when sysadmins decide to reorganise directory structures or "archive" "old" files that noone uses anyway.True, but it really comes down to a business decision (cost-benefit analysis). If you have the bucks, the expertise, and the time, go with the Blobs, otherwise go with the flat files.

Insert multiple images in one slide and setting dsiplay time for each

Hi,
I am using Adobe Captivate4.
I could not able to insert multiple images in one slide and set display time for each image.
Need help in this regard.

This is not about background image.
I have 3 images and want to insert in one slide only. I could able to insert image1 for first time, but could not able to insert image2 and image3.
I have followed the same steps: Insert Menu>Image.

MS word 2011 and Lion 10.7.2

Dear All,
After updating to Lion 10.7.2, I have encountered this error message when trying to save files in MS Word to my own hard drive. This happens after a couple of minutes use.
'You cannot save while the file is in use by another process. Try saving the file with a new name. (xxxxxx.docx)'
This makes MS Word very dangerous to use, as the autosave sometimes fails. Any ideas or hints, or will I need to downgrade to 10.7 and wait until Apple or MS offers a solution?
Many thanks.

Same problem here. All software up to date. I have an extra issue in that word 2011 completely crashes my finder as well on occaision, to the point where only a full restart will fix it. I saw an answer to the first problem in a microsoft PC forum that says it's a known problem and to turn off auto save. That is not an option for me! If only pages did cross refernces and captions I could get rid of word!

Cannot select multiple images in iPhoto '08?

What am I doing wrong? I want to select multiple images to either print several on a page, or publish to a gallery, but for the life of me I cannot find a view which shows me all photo thumbnails or all thumbnails in an album or all in an event. I can spin the mousewheel to singly go through them, or I can hit edit and go to full screen where I get a thumbnail bar and can select multiples and view them at the same time, but printing or publishing this selection only recognizes the first photo as selected. If I try to select View>Thumbnails, the subsequent menu options are grayed out, and the top one is "hide" even though I see no thumbnail bar. Is there something very obvious I'm missing, or has something gone awry and I should reinstall?
<Edited by Host>
Any one can help them?
Thanks

There's a slider down right of the iPhoto Window - drag it left.
Regards
TD

Unable to edit PDF created by Word 2011 on Lion.

Two weeks ago I upgrade my 24-inch iMac from Snow Leopard to Lion on which I am running Adone Acrobat 9 Pro (with all the latest updates).
My challenge is that I am trying to edit a PDF file created using Microsoft Word 2011 for Mac. When I print the file from Microsoft Word 2011 for Mac and click on the PDF button, the only option I see to create a PDF file is "Save as PDF", so this is the only option open to me. (I seem to recall that there used to be a 'Save as Adobe PDF' optionm, that is no longer there.
When I open the PDF file in Adobe Acrobat 9 Pro I get the folloiwng message:
"Acrobat was unable tp make this
document accessible because of the
following error:
Bad PDF; error in processing fonts.
<unsupported Type 2 font>[1]
Please not that some pages of this
document may have been changed.
Because of this failure, you are advised to
not save these changes."
Any thoughts as to how I can create a file using Microsoft Word 2011 for Mac and then be able to edit it in Adobe Acrobat 9 Pro?

Steve,
Might M. Kazlow's announcement be relevant?
Announcement: Mac OS X.7 Lion Compatibility and Acrobat X
Mac OS X.7 is not fully compatible with Acrobat X.
Please see http://kb2.adobe.com/cps/905/cpsid_90508.html for more details.
by MichaelKazlow at Jul 20, 2011 1:17 PM
Be well...

OSX Mountain Lion - Cannot change desktop image

I used an image I'd downloaded as desktop wallpaper. I have tried to change it to the default image, other images, sold colours, but the same image always returns after I reboot (warm and cold boots). Note that I can change the desktop image, but it always reverts back to the old image. The changes do not stick. I cannot locate the image in Finder. Any ideas?

I have the same situation as Marc; however, I do not have access to images. The multicolor circle keeps turning.
This application (Desktop & Screen Saver) is not working anymore.
Thank you.
Guillermo

LR 2.2 on OS X 10.5.6 - Cannot reject multiple images on 2nd display Grid

Hi there,
For some reason, if I select multiple images on Grid View on my 2nd display and click 'X' to apply the Reject Flag, only the first image selected will get the X Flag. However, if I do the same exact with the Grid on my primary display, all images selected will get the X Flag.
Any ideas on what could be causing this? Is this a feature that I am missing an understanding of?
TIA!
Brian

Hmmmm... thanks for the confirmation. It just seems so odd that Adobe would feel the need to 'classify' the 2nd display as a second-class citizen. Would it really be that much more resource-intensive to allow me to take action on multiple photos on the 2nd display?
Oh well, perhaps in a future build.

Mac Mini 2011 / Lion Cannot insert disc into slot??

When I try to insert a disc (music) into the slot, it only goes in slightly less than half way.
It is never pulled in by the mini.
Early in this mini's life, I loaded tons of music cd's on the mini.
How do we fix this problem? TIA.

1. Go into Spotlight from the top of your MacBook on the menu bar.
2. And search for "CDs & DVDs" (It's also in the System Preferences)
Click on it and a small CDs & DVDs window will pop up with options of what happens when you insert a disk into the drive
3. By then, try inserting a disk in (while that window is open. This kinda wakes up your drive to accept the disk). It should accept it.
4. If nothing happens, then manually open the program that should be opening when you insert the disk or go to Finder (Eg. if it's an audio disk, then open iTunes)
5. If opening the program still does not activate the drive to start spinning the disk, then close the programs and windows you opened, and repeat step 1-4 and the disk should be spinning and automatically opening the proper program.
Or go into Terminal app and type in: drutil ejec
The drutil ejec tip is credited to Dan8954
Hope that helps!

How do I insert multiple images inline with text in Pages 5.0?

I have over 20 images in my iPhoto library that I want to insert in a document one after the other (inline with text).
How do I do this without having to insert them one by one and going into the image options to change the formatting? It's a pain to have to do it this way...
I tried using the media browser in Pages, but it seems you can only add them one by one. So I exported the pictures from iPhoto into a folder, selected them all in Finder and dragged them onto my document. All the images appeared stacked on top of each other in a random spot on my page. I can't select them all for some reason. So again, I have to click on them one by one to the formatting? Why is this not simpler? Am I missing something?

If you use the Help in your Pages 5 you will find the followings link http://help.apple.com/pages/mac/5.0/?lang=en#/tanca246d3ac

Cannot select multiple images

I click on the first image, and then hold the shift key and click on a second image, but it only selects the second image. This used to work!

Here's the keyboard issue. It was my error. Nothing wrong with the
program or computer.
I use mouse without borders. That let's me use one keyboard and mouse
between multiple computers. My main keyboard was pointing to my work
computer. The Wacom tablet was being used to select the images on my
Lightroom computer. I should have been using the keyboard on my Lightroom
computer. That's why holding down the shift key on the work computer was
not allowing me to select images on the Lightroom computer.
Like I said before. Total user error.
Alton

Mountain lion cannot handle multiple monitors. Why?

Runnig Mountain Lion 10.8.1 on a MacPro Early 2009.
Mountain lion has screwed my multiple monitor life up! With Lion I was able to have 5 multiple monitors rotated 90 degrees running without a hitch. I know... I am a visual learner . I have 3 Nvidia Geoforce GT 120 512 MB graphics cards. All bought from apple. Why can't mountain lion handle multiple monitors in any rotation? Is there going to be a fix soon? like 10.8.2? Does anyone know if apple is working with Nvidia to correct this? I am back to just 1 90 degree rotated monitor.This hurts.

10.8.3 DOES NOT WORK for me.
this did NOT solve my problem... I responded too soon.
Yes I am able to have 6 monitors in portrait mode with 3 Nvidia Geoforce GT 120 512MB graphics cards but as of yesterday, my whole system shuts down and reboots. This happened 3 times in the span of about an hour.
I removed all but 2 monitors running on only 1 Nvidia Geoforce GT 120 512MB graphic card and the system crashes stopped.
So I am back to either waiting again for some resolution from apple or looking into buying newer graphics cards.
Oh well, it was fun while it lasted... a whole day.
Again, I can't get no satisfaction...

Word 2011 in Lion, cannot insert multiple images, crashes...

Similar Messages

Maybe you are looking for