Word Browser Plug-in

I downloaded the schubert word browser plug-in, installed it according to the readme instructions, but when I go to a word document on safari, it just downloads it and saves it to the desktop like normal, without displaying it. I tried the pdf browser also, and had the same problem, like I had never downloaded it in the first place. I'm pretty sure I disabled quicktime, so I don't know what I'm doing wrong!

Hi -
Did you follow these instructions?
Safari across the board runs slower in Rossetta mode. That's because the OS has to translate the code for the various plug-ins etc. so they can be readable by the Intel processor. Also, the Flash plug-in may not work in Rosetta mode, which would preclude your being able to use Flash content. Maybe someone with an Intel Machiine will post here to confirm or refute this notion.
Thanks for the

Similar Messages

Error while downloading App World browser plug-in "not like others error"

Hi,
Ok I bought my first BlackBerry phone and I'm very happy with it. But while I was sitting up my e-mails and other things it ask to sing in with BlackBerry ID so I register at the website. After USING MY PC "windows 7 64-bit" I sing in it ask to install a browser plug-in. So I click download than save to desktop and ERROR can't download. After trying for a week with no luck I went for the back road opened Google and typed "AppWorldinstaller-en.msi" I fond a known website with the same file so I download and install successfully. After that went back to the BlackBerry ID sing in page entered my e-mail and pass and log on. The website checked for the plug-in and reply that it NOT INSTALLED how can that be possible??
PLEASE SOME ONE HELP ME
http://www.m5zn.com/uploads2/2012/2/13/photo/021312160218vajhk89zyxif1eo73drh75.jpg

Have you checked your programs and features list to see if it has already installed? I had exactly the same problem using windows 7 x64. It wasn't working and so I tried installing again and got your error. The chances are it's already installed but you're running the 64-bit version of Internet Explorer (or another 64-bit web browser) and the Appworld plugin is only 32-bit, so it wont run inside the 64-bit browser. If you run a 32-bit web browser and go back to Appworld, it should recognise the plugin is installed just fine.

Enable Commenting Tools in Adobe Acrobat under Browser Plug-in in Internet Explorer using

We have a problem in showing commenting tools in Adobe Acrobat under browser plug-in in Internet Explorer. Adobe Support cannot answer my question and refer me to Devnet here.
Our system is using browser plug-in to display PDF file by Acrobat under > > Internet Explorer (document viewer). The PDF documents have reader extension enabled.
We supposed that if a PDF page is viewed and I customize the toolbar, the same toolbar and icon will be displayed next time when I retrieve a page, only if I select "Review and Comment" icon, and it only applies for v8.0.0. If I do not select review and comment icon, or I have selected review and comment icon but > > use other version of 8.x, my selected toolbar and icon cannot reappear next time.
If my selected toolbar and icon do not appear, I can press F8 to hide the icons. If press F8 again to unhide the icons, all my selected icons can be shown this time. But it does not automatically re-appear if I open another documet viewer.
Kindly note that all PDF files have reader extension enabled, and only Acrobat 8.0.0 Professional is used in client PC. There is no Adobe Reader in the PC. The PDF version is 1.4 (Acrobat 5.x) or 1.5 (Acrobat 6.x). The user has comment rights since the PDF file has reader extension and Acrobat 8.0.0 is used. User has no problem in mark-up the PDF files, but has problem in showing the selected tools.
OS: Windows 2000 SP4
Browser: IE 6.0 SP1
Acrobat version: Acrobat 8.0.0 Professional
PDF version: 1.4 (Acrobat 5.x) or 1.5 (Acrobat 6.x)
Steps to produce the problem.
1. Scan paper document and create a batch of PDF files (one page per file)
2. Enable reader extension for all PDF files by LifeCycle.
3. Put the PDF files into a web based interface, entering a page number will open a new web browser which interface the browser plug-in and display the content of the imaged PDF file by Adobe Acrobat Professional 8.0.0.
4. Open a page. It only show a few icons on toolbar (see a.png).
5. Select the commenting icons to be shown (do not enabled in "review and comment)". The icons will be shown.
6. If the browser is closed, then use the web interface to open another page, the selected tools cannot be shown (same as a.png attached in my previous email).
7. Select "review and comment" tool. (see b.png attached in my previous email)
8. The selected tools are shown again (see c.png attached in my previous email).
9. Close the browser, use the web interface to open another page, the selected tools are still here.
10. Unselect "review and comment", the selected tools will be hidden next time when a page is opened by the web interface.
11. Close the browser, and open a new page in web interface, the PDF file will be shown, and the selected icons are hidden.
12. Press F8 to hide icons, all tools are hidden.
13. Press F8 to unhide icons, all selected tools that are not shown in step 11 are shown again
14. If Acrobat 8.0.0 is patched or updated, "review and comment" tool has no effect in "memorizing" the selected tools.

That option is nothing to do with the PDF being editable, it's to control the display of the toolbars. "Reading Mode" is when the toolbars are hidden and the black head-up display navigation bar appears at the bottom of the screen.
PDFs displayed within a web browser with Acrobat/Reader X are not editable, nor can you apply markups, unless you're within a browser-based-review workflow. You have to save a copy locally and open it in desktop mode to make any changes.

Maintaining Comment & Markup Toolbar under Browser Plug-in

Dear all,
We have a problem in showing Comment and Markup Toolbar in Adobe Acrobat 9.3.3 Pro under browser plug-in in Internet Explorer 7 under Windows Vista. Here is our environment.
OS: Windows Vista Ultimate SP1 (latest updates applied)
Browser: Internet Explorer 7.0 (latest updates applied)
Acrobat version: Acrobat 9.3.3 Professional (latest updates applied)
PDF Producer: Acrobat Distiller 8.0.0
PDF Version 1.6 (Acrobat 7.x) with reader extension enabled
In Acrobat under brower plug-in, if I enable comment toolbar, then I retrieve another page, the comment toolbar will disappear. Kindly advise if the toolbar can be maintained.
Thanks & regards,
William Leung

We enabled Adobe Reader Extension because it allows auto-saving of markup via browser plug-in with Acrobat Professional. If Reader extension is not enabled, the Acrobat Professional via browser plug-in does not have comment and markup toolbar to be enabled.
Now our problem is that is reader extension is enbled, we can enable comment and markup toolbar. However, when next page is loaded, the toolbars are reset and user have to customize the toolbar again.

How do I get a browser plug-in to work if it isn't compatible with my version of Mozilla

I have McAfee Site Advisor installed which as far as I know is a browser plug-in and I keep on getting prompts to update to Firefox 6. However I noticed that when I tried to update, my site advisor wont work this this version and so for this reason I haven't updated. Can anyone tell me if there is a way of making the above mentioned plug-in to work, as this is one plug-in I rely on and don't want to do without.

https://community.mcafee.com/thread/36733

How to detect the Acrobat Browser Plug-in version installed on a users system for non-IE browsers?

How to detect the *Acrobat Browser Plug-in version* installed on a users system, on Firefox, Safari, Opera, etc?
Or one script for detecting Plug-in version for major browsers. Need full example code.

Wrote an article on this with code samples (Javascript + HTML) - basically there are differences between IE and other browsers. Chrome natively comes with the Chrome PDF Viewer so I've incorporated that in my detection script.
The script detects the browser type, and the installed acrobat version...
Have a look here:
Detect the Adobe Reader Plugin

Browser plug-in with mac run-time engine problem

I have repeatdly tried to get web browser (Both Explorer 5.2.3 and Safari) VI viewing on my Mac (OS 10.4.2). I have reinstalled the run time engine (Labview 7.1.1 as downloaded from NI) numerous times with no luck. I get the usual "Browser plug-in required" message.
Doing a seach on my machine in the Internet plug-in folder reveals no new plug-ins after installation of the RTE.
I can run this VI work fine on a remote PC running Explorer, so I think my VI server is running fine. I quit the PC before trying it on the MAC to avoid any license limitations.
Any suggestions? Is the browser plug in available as a seperate down load? I could not locate it on the NI site.
Thanks
-G

Hi G,
Lets try this. Install the LV71NPlugin file, in the attached image, in the /Library/Internet Plug-Ins directory. I had to save the image with a different extension to be able to upload it to the forum so...
1) Download the file
2) Change the file extension from "abc" to "dmg"
3) Copy LV71NPlugin to /Library/Internet Plug-Ins
Please let me know if this works for you.
Thanks
Chris J
Attachments:
LabVIEW71BrowserPlugin.abc ‏83 KB

Checking for not up-to-date add-ons the latest VLC browser plug-in v. 1.0.5 'Goldeneye' is reported te be obsolete. Why?

The add-on causes no troubles as far as I'm aware of, and despite the recent VLC-application updates, browser plug-in 1.0.5 is still the latest version. Why is Firefox add-on check reporting this plug-in as being obsolete? A newer one is not available.

Dear Swarnava,
Yes, VLC 2.0.0 is installed. And so is the browser plug-in 1.0.5, which hasn't been updated for a long time. That's why I'm wondering why Firefox 'thinks' there's a new version of that particular plug-in available.
Best regards,
Robbert

Browser plug-in for ejre1.4.2

Hi,
I tested the ejre1.4.2 on my Atmel at91sam9263 platform and it works fine in Linux. However, it does not come with browser plug-in. Unfortunately, other Jave SE embedded packages do not work with this armv5 processor. Is it possible to get a web browser plug-in to work with this ejre1.4.2? I googled for a java web plug-in and found things like icedtea-gcjwebplugin, gcjwebplugin and classpath. Anybody know whether they works with ejre?
Many thanks,
Derek

Hi, assuming your are referring to Jeffrey Freidl then can I just say that his plug-ins add so much more flexibility to any that might already exist in LR and I think he only expects the minimum set by Paypal as the minimum donation.
You can try them for a number of days before deciding to donate.
I did and I wouldn't be without them.

Adobe Contribute web browser plug-in

I can't seem to find much information about the use of Adobe Contribute web browser plug-in
I found a download link: http://helpx.adobe.com/contribute/kb/firefox-4-firefox-5-plug.html
however it doesn't seem to want to install with my version of firefox
I have the latest version fo firefox
thanks
Jon

Is it possible to set (not save) temporarily an annotation on document opened in browser?

Control Adobe Reader browser plug-in programmatically

Is it possible to control the size of the
Adobe Reader Browser plug-in programmitically?
I would like to be able to:
1) Reduce the size of the plugin, so that I can use the
botton half of the browser to display other information.
2) Change/Reload/Specify a different document to display.
3) Programmitically zoom or chnage pages.
I would like to do this with ASP.NET, if possible.
I've seen thrid party ASP.NET controls that do this.
I would prefer to use the Adobe plug-in.
Thanks

Try reinstalling Lion:
Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Browser Plug in

Greetings,
I apologize if I'm posting in the wrong forum.
Whenever I visit the following page:
http://ca.blackberry.com/apps-software/devices/
I get a message saying: "This webpage wants to run the following add-on: 'BlackBerry WebSL Browser Plug-In' from 'Research In Motion'. This only happens in Internet Explorer.
Why am I being asked to download a plug-in? What does it do?
Thanks,
Shane.
Z10 STL100-3 (version 10.3.1.2708)
LTE Playbook (version 2.1.0.1917)

Hello SGoodman,
the BlackBerry WebSL Browser plugin is a legit activeX developed by RIM.
Some reminders: currently when you want to upgrade the OS on your BlackBerry smartphone, you have several ways:
use the option on your device, the installation is made "OTA" : over the air.
connect your device to your PC, and use Desktop Manager, and let Desktop Manager find the relevant OS installer (= the most recent from your carrier)
connect your device to your PC, and use Desktop Manager, after installing the OS you want (= one that matches your device model)
connect your device to your PC, without using Desktop Manager. In this case, you can rely on Internet Explorer for Windows OS, after installing some kind of "desktop manager lite" that will do the same as item 2.
so when you browse that page, Internet Explorer tries to install what needs to be installed for item 4.
HTH.
comment : I strungly advise you to use item 3 (control is power)
comment : I strongly advise you to never ever use item 1 unless your life is in danger. Or if you believe your life is not spicy enough.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Browser plug-in without RTE?

Can I get only the browser plug-in from somewhere? As the whole RTE is >32 MB to download I would like to have a smaller download file which only contains the web client functionality... Is this possible?
Thanks

Hi Axiom,
Unfortunately there is no easy way to do that. Please read the answer of Justin for a very good answer:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=506500000008000000EBC20000&ECategory=Distributed+I%2FO.FieldPoint
Regards,
Luca
Regards,
Luca

Web browser plug-in for publishing a front panel

I have a number of automated systems operating through the corporation. Support is becoming an issue. I plan on running an application on a server, the front panel will look like a 'tech support request form'. Accessed through a browser, users on the LAN will access the "form" and log in a support request. On the back end the VI will log the request to a DB and email me to alert me to the issue
Just read in an excerpt of the LTR that to accomplish this the client machines must have:
"To operate remote panels from a browser, you must first have the LabVIEW 6.1 run-time engine and browser plug-in installed on the client machine."
The runtime engine is no problem, but what , and where, is the br
owser plug-in? and will it operate with both/either Netscape / IE?
Lawrence M. David Jr.
Certified LabVIEW Architect
cell: 516.819.9711
http://www.aleconsultants.com
[email protected]

I looked through the source code on the html pages, there is some javascript detection. I'm running Win2k and IE 6 and don't have the 6.1 run-time engine on the machine and get prompted to install it.
If you view source of any of the live experiment pages search for "ftp.ni.com" and that should take you to the right place in the html for the script.
Johnathan's post mentiond that NS is only supported for versions greater than 4.7 so that might be one issue with your current setup. I'm sure there has got to be a way to detect your browser version too and then inform people that if they're using an older version they need to upgrade to view the remote panel. Of course, I said I'm sure it's possible which doesn't mean I know myself ho
w to do it ;-) I have seen it on some sites when functionality isn't available for older versions like NS 3.x
One other thing, depding on how you're going to deploy the application and how much control you have over the machines accessing the pages. If the detection is a javascript based detection then you might want to include a detection to make sure people have javascript turned on in the first place. If you think that would be useful let me know and I'll try and see if I can find something.
I'm waiting to hear back from somebody on the NS issues and to confirm the javascript working for both browsers. I'll let you know as soon as I have more information.
Best of luck,
Kamran - NI

Browser plug-in problem?

When I goto the (quicktime) movie trailer website and select a HD movie trailer and try to start it by clicking say the 720p button, nothing happens until I click somewhere again and then the quicktime player pops up.
It does this both in Internet Explorer 7 and in Firefox 2, I also observed this behavior on another system. Maybe a bug in the event handler of the browser plug-in? Previous versions did not do this, 1 click was enough.

Hi G,
Lets try this. Install the LV71NPlugin file, in the attached image, in the /Library/Internet Plug-Ins directory. I had to save the image with a different extension to be able to upload it to the forum so...
1) Download the file
2) Change the file extension from "abc" to "dmg"
3) Copy LV71NPlugin to /Library/Internet Plug-Ins
Please let me know if this works for you.
Thanks
Chris J
Attachments:
LabVIEW71BrowserPlugin.abc ‏83 KB

Word Browser Plug-in

Similar Messages

Maybe you are looking for