Word cannot complete the save due to a file permission error when resaving Word document.

So I have to rename it to be able to save the document. This happnes once in a while. What's the reason? And what should be done? (From "Word" to "error" is the error message in the title)

Hi,
What Office version are you using?
Please try to start Microsoft Word in Safe Mode if it helps, following steps for Word 2010, the steps for Word 2007 are similar:
Click Start, point to All Programs, and then point to
Microsoft Office.
Press and hold the CTRL key, and then click the Microsoft Word 2010.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Office program, we can try to disable them. Normally, you could do the following to disable the conflict add-ins in your Word program:
Click File menu, click Options > 
Add-ins, click Go button in the Manage: COM Add-ins.
Check if there has any add-ins, clear the checkbox to disable them.
Close the Microsoft Word and restart it.
Add one check back each time to the list of Add-In, restart Microsoft Word, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
- You may also check Save Folder and Word Default Save Folder permission, make sure user account has Full Control and Modify permission.
Best regards.
William Zhou
TechNet Community Support

Similar Messages

  • Word cannot complete the operation because too many files are open

    Hello,
    I'm working on a 60 pg. document, and when I hit 'save', I get this annoying msg.:
    "word cannot complete the operation because too many files are open." I have no other files open, and I am unable to continue to work, because I cannot save - can anyone help? Thanks!

    Hello Kristina,
    Have you been able to save the file at all?
    More than anything, it seems to be a bug when you're trying to save to a server. There's more on the problem here. So what you can also try is simply saving the file to your desktop, or somewhere on your Mac's hard drive. That way you're saving the file locally instead of to a server. If that works, you've at least saved the file and can continue on. Otherwise, read on.
    If you can't do it from Word, then at least save your changes from another application. Open TextEdit. You should get a blank file on the desktop. Make sure it's set as a rich text file. You'll know just be looking at it. If you see a ruler and other buttons at the top of the TextEdit document window, it's rich text. If not, make it rich text by pressing CommandShiftT.
    Copy and paste your entire Word text into the TextEdit window. Save the TextEdit document to the desktop. Now that you've at least gotten your work saved, you can try some other things.
    If you're not trying to work on the file from, or save it to a remote server, then don't worry about the first workaround. It doesn't apply. Number two was poorly worded by John. He seems to assume everyone knows what RH is. I had to look it up. It means Remote Home folder. So open the Word preferences and click on FIle Locations. Highlight the first choice, Documents, and click on the Modify button. Choose any location you want on your Mac's hard drive. Click "Choose" and close the preferences. Can you now save the document to the folder you defined as the default save location?
    Spotlight is that little magnifying glass in the upper right corner of your screen by the time/date. There are a few methods to disable Spotlight. What John is saying that if the Mac is spending a lot of time indexing your drives at the same time you're trying to save your Word document, the intense processing time to index may be keeping Word from saving.
    If you've managed to at least save your file as a rich text TextEdit document, then shut all of your applications down and restart your Mac. Launch Word and open the TextEdit file. You may lose some formating if you've done tables or other things TextEdit can't save in Word's original form.

  • Cannot install the Tempro due to administrator privileges 1925 error

    Amongst others, with the same result, I downloaded Tempro from the Toshiba site and started with the installation. All went well untill the box popped up you do not have Admin. privileges and the installation of the program was terminated. Called the local Toshiba supplier whom offered a few clues, however none was successfull. Please help. Gawie

    Hi
    I found a MS knowledge base article about this error message 1925 and this appeared also while OFF2000 installation.
    http://support.microsoft.com/kb/217662
    Check it out
    > Something else that bothers me, am unable to download Vista updates due to this privilege nonsence!!
    But I think this Tempro issue has something to do with your system.
    In my opinion your system could be muddled up or some firewalls/antivirus settings affect the installation. I've noticed that many installation instructions for Vista say to disable your anti-virus/firewall software before installing. Check this too!

  • Could not complete the export command because of an application error

    Every once in awhile I get the error, "Could not complete the export command because of an application error" when using the Save for Web option. It's really confusing because the error is not consistent. I don't get it all the time. In fact, 99% of the time I can save with no problems. When I quit Photoshop and reopen my files they seem to save just fine. Does anyone know why this happens, and how to prevent it from happening in the future?
    Here are my specs:
    Macintosh: iMac
    OS: 10.6.8
    Photoshop: CS3 (v10.0.1)
    Any help is greatly appreciated!

    No idea about the specific issue, but I like to pass on some general advice I have received myself here over time:
    Boilerplate-text:
    Are Photoshop and OS fully updated?
    As with all unexplainable Photoshop-problems you might try trashing the prefs (after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed) by pressing command-alt-shift on starting the program or starting from a new user-account.
    System Maintenance (repairing permissions, purging PRAM, running cron-scripts, cleaning caches, etc.) might also be beneficial, Onyx has been recommended for such tasks.
    http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html
    Weeding out bad fonts never seems to be a bad idea, either. (Validate your fonts in Font Book and remove the bad ones.)
    If 3rd party plug-ins are installed try disabling them to verify if one of those may be responsible for the problem.

  • Help me! "Could not complete the export command because of an application error"

    Please, help me!
    I've got the mistake "
    "Could not complete the export command because of an application error" when I save for web in PS3 in win
    thks so much,

    You need to provide much more info about your system or else this is pointless.
    Mylenium

  • Time Machine couldn't complete the backup due to a network problem

    Firstly apologies for the long post, I've been bottling these problems up and could now use some expert advice.
    I have a MacPro (10.6.3) with four internal drives (320GB system/apps. + 3x 750GB data, images etc) and a MacBook Pro (10.6.6) with a 320GB internal. With so much accumulated data (Mac user since SE FDHD) I wanted a reliable means to backup all my projects, books, papers, research, images etc. I had several bad experiences using Iomega drives (Ultramax and Storcentre) which were not very Mac compatible and shifted over to a 10TB LaCie 5Big Network 2 which is promoted as Time Machine compatible. Set up Time Machine (with a few hiccups) in Sept 2010 and it ran perfectly, backing up both main computers until March 2011. I have now experienced a string of problems backing up the MacPro, some of which have been resolved speaking to people, some by checking forums and some by using my own noddle to figure it out. The latest error message I am getting is "Time Machine couldn't complete the backup due to a network problem. Make sure your computer and the backup disc are on the same network, and that the backup disc is turned on. Then try again to back up."
    The circumstances of this are as follows: TM seems to be trying to completely back up everything already backed up from previous months so I am using the "exclude" option to do this in manageable chunks (5.54TB of 7.99TB is available so there is a lot of stuff on there, hence my reticence to erase and start again). I started a backup last night which said it was 242GB and when I came back hours later (I estimate 30GB and hour or 500MB a minute) it has failed with the error message above. I asked it to back up again and it said it now had 191GB to backup, at the next failure it was 142GB, dropping by approx 50GB a time (if there a maximum it can manage in one go?), the next time it was starting again with 242GB.
    I checked the disc it was backing up to, discovered it was now selecting Public-1, re-selected Public which houses the macpro.sparsebundle, dropped the backup size (Options) to 73GB and set it off again and it is backing up as I write. I am hoping it will complete and permit another chunk to be backup but the fact it looses network connection (seemingly) or has a maximum backup in one go, is annoying because it means you cannot leave it overnight and trust it to do the backups.
    The other problem seems to be a shut down by LaCie 5Big because several times (and once this morning) I have had this message "The file server "LaCie 5Big" has closed down, followed by a complete Lacie shut down and auto-reboot with all lights and whistles. Lacie think this could be a power supply problem and say they are sending me another power brick. They also say they do not support Time Machine (they should check their own literature) and suggest I use LaCie 5Big for 'drag and drop' backup. If I wanted to do that I could pick up a cheap and nasty HD from PCWorld, not this high end 10TB drive which cost over £1,000 !
    For a while y'day I could not even find the Lacie on the network but after changing the ethernet cable from Lacie to router (Linksys) it miraculously re-appeared so that problem may have been the original Lacie blue ethernet cable had developed a fault. Checking cables is an oft-overlooked option.
    A catalogue of errors, some solved, others still all pervading, so any words from the wise would be gratefully accepted.

    I verified the macpro.sparsebundle and Time Machine backups in Disk Utility and it said both appeared to be Okay in green type. So that did not solve the issue. I did a Disk Utility repair a day or so again (despite Verify saying everything was fine) and said there was nothing to repair. I suspect two problems, the power brick may be faulty producing intermittent power and maybe causing the drive to close down (hopefully Lacie will send me a replacement to try) and second, I am thinking the network connection is getting dropped causing crashed backups without the Lacie shutdown/reboot sequence. The 73GB back up failed, I started it again at 54GB and it failed again, just started it again at 45GB - this is no way to progress!
    Perhaps the relatively new (last year) Linksys router is the problem, I find my MBP says AirPort is active but it fails to appear in Go>Server unless I switch it off and on again and perhaps a similar problem drops the connnection to the Lacie.

  • XML Report output giving error "word cannot open the file because....

    Hi All,
    Greetings!
    I have a standard report, 'Payables Posted Invoice Register".
    The report was going in to warning beacuse of some Invalid characters in the Data.
    I corrected the invalid characters and then ran the report ; it completed fine.
    But now when I try to open the report output, the output is not getting open but its allowing me to save the file.
    When I save it on my local machine and try to open it, I am getting an error as "word cannot open the file because it is larger than 512 megabytes".
    The document size showing is 664MB when I saved it on my machine. And the output type of the report is RTF and not PDF.
    Can anybody please help?
    Thanks,
    Sachin

    not sure, if the Microsoft word has limitation of file size.

  • "the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

    Hi all,
    I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
    It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
    "the finder cannot complete the operation because some data in [name of
    iMovie file] could not be read or written (Error Code 26)" or the
    message "A project file is missing. The file [name of the QuickTime
    movie inside the project.dv] couldn't be opened and is being skipped."
    This happened suddenly, I was able to save a backup version numerous
    times while working on the project.
    I followed some of Karl Petersen's advise on apple discussions. I opened
    the package contents, and everything seems to be there. The source file
    (original QuickTime movie) is there and can be opened and played. I
    replaced the current project file with the backup in the package
    contents, but that did not change anything. I was able to export the
    movie timeline into a new project as a single clip, but would like to be
    able to copy the current project.
    Thanks for any ideas..

    Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

  • I recently changed my apple ID but my previous apple ID is associated with my icloud account. I'm setting up my new iphone 6 and cannot complete the set up until I can sync my icloud account. Does anyone know how to change the icloud id?

    I recently changed my apple ID but my previous apple ID is associated with my icloud account. I'm setting up my new iphone 6 and cannot complete the set up until I can sync my icloud account. Does anyone know how to change the icloud id?

    Do the following:
    Make sure you are signed into iMessage and FaceTime with your current ID.  If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
    Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.)  Now go to Settings>iCloud, turn off Find My iPhone and enter your current password when prompted (even though it prompts you for the password for your old ID).  Then go to Settings>iCloud, tap Sign Out and choose Delete from My iPhone when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address back to the way it was.  Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your phone).

  • Time Machine spends hours partially backing up and then fails with "Time Machine couldn't complete the backup due to a network problem."  Tried suggestions I've seen on the forum.

    Time Machine spends hours partially backing up and then fails with "Time Machine couldn't complete the backup due to a network problem."  I've tried various suggestions I've seen on the forum but nothing has worked.  TIme Machine worked fine for the last two years and just suddenly started having this problem every time.  The only thing that was a little different is that the computer was off for a week while on vacation and then I added a large amount (20 GB) of photos. Now the requested backup size is 82GB, which is large, and process proceeds very slowly for 2-3 hours before failing with the message mentioned.  I have more than enough available backup storage space for it.  Before failing, Time Machine has backed up no more than 12GB or so of the backup.  It fails during different files each time.
    I've turned off the computer sleep feature, and I've checked that the NAS is set to never automatically power down. I normally backup over Wi-Fi, but I've also tried connecting to Ethernet and it still has the same problem.  It's odd because I also have a MacBook Pro that is still backing up fine to the same NAS using the MacBook's Time Machine. 
    I am using an iMac with OS X 10.6.8 and an Iomega StorCenter ix2-200 NAS.
    I have system logs that I can share if helpful.  The logged messages vary a bit from run to run, but here are some messages that I've been seeing:
    I always get this message near the beginning of the backup:
    Event store UUIDs don't match for volume: Macintosh HD
    I've gotten this messsage a number of times:
    Bulk setting Spotlight attributes failed.
    One Day
    Stopping backupd to allow ejection of backup destination disk!
    Another day
    1/7/12 10:44:20 AM
    mDNSResponder[18]
    PenaltyTimeForServer: PenaltyTime negative -112916, (server penaltyTime -1132397006, timenow -1132284090) resetting the penalty
    1/7/12 10:46:37 AM
    kernel
    ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x1106be94
    1/7/12 10:46:37 AM
    kernel
    AFP_VFS afpfs_DoReconnect started /Volumes/TimeMachine prevTrigger 0 currTrigger 1
    Another Day
    1/6/12 8:03:22 AM
    Google Chrome[164]
    Cannot find function pointer CMPluginInFactory for factory 3487BB5A-3E66-11D5-A64E-003065B300BC in CFBundle/CFPlugIn 0x16f99e20 </Users/smarmer/Library/Contextual Menu Items/Google Notifier Quick Add CM Plugin.plugin> (not loaded)
    1/6/12 8:04:02 AM
    com.apple.backupd[193]
    Copied 7.5 GB of 67.0 GB, 8866 of 8866 items
    1/6/12 8:06:58 AM
    /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[1013]
    No valid tickets, timing out
    1/6/12 8:29:44 AM
    mDNSResponder[19]
    PenaltyTimeForServer: PenaltyTime negative -148702, (server penaltyTime 2056822773, timenow 2056971475) resetting the penalty
    1/6/12 8:59:22 AM
    kernel
    ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xa5ac380
    1/6/12 8:59:22 AM
    kernel
    AFP_VFS afpfs_DoReconnect started /Volumes/TimeMachine prevTrigger 0 currTrigger 1
    1/6/12 8:59:22 AM
    kernel
    AFP_VFS afpfs_DoReconnect:  doing reconnect on /Volumes/TimeMachine
    1/6/12 8:59:22 AM
    kernel
    AFP_VFS afpfs_DoReconnect:  soft mounted and hidden volume so do not notify KEA for /Volumes/TimeMachine
    1/6/12 8:59:22 AM
    kernel
    AFP_VFS afpfs_DoReconnect:  Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/TimeMachine
    1/6/12 8:59:22 AM
    kernel
    AFP_VFS afpfs_DoReconnect:  connect to the server /Volumes/TimeMachine
    1/6/12 8:59:22 AM
    kernel
    ASP_TCP asp_SetTCPQoS:  sock_settclassopt got error 57
    Another day
    1/5/12 3:48:55 PM
    mdworker[2128]
    CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    1/5/12 4:24:54 PM
    mDNSResponder[19]
    PenaltyTimeForServer: PenaltyTime negative -42698, (server penaltyTime 1148718961, timenow 1148761659) resetting the penalty
    1/5/12 4:29:58 PM
    com.apple.backupd[2074]
    Copied 586.4 MB of 67.0 GB, 9891 of 9891 items
    1/5/12 4:39:00 PM
    kernel
    ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xa1c0380

    bokon0n wrote:
    1/11/12 8:53:30 AM
    com.apple.backupd[1169]
    Warning: Destination /Volumes/TimeMachine does not support TM Lock Stealing
    1/11/12 8:53:30 AM
    com.apple.backupd[1169]
    Warning: Destination /Volumes/TimeMachine does not support Server Reply Cache
    Those indicate that your NAS is not fully compatible with Snow Leopard. 
    1/11/12 8:53:35 AM
    kernel
    jnl: disk2s2: replay_journal: from: 67182592 to: 78680064 (joffset 0xa7b8000)
    1/11/12 8:53:39 AM
    kernel
    jnl: disk2s2: examining extra transactions starting @ 78680064 / 0x4b09000
    1/11/12 8:53:39 AM
    kernel
    jnl: disk2s2: Extra txn replay stopped @ 79056896 / 0x4b65000
    1/11/12 8:53:49 AM
    kernel
    jnl: disk2s2: journal replay done.
    1/11/12 8:53:49 AM
    fseventsd[41]
    event logs in /Volumes/Time Machine/.fseventsd out of sync with volume.  destroying old logs. (253512 14 253512)
    1/11/12 8:53:50 AM
    kernel
    hfs: Removed 1 orphaned / unlinked files and 0 directories
    That looks like a problem was found with the file system (data) on the TM disk.  I don't know the details, but OSX tried to recover it from the journal, and found extra data on the drive.    Likely a result of the incompatibility mentioned above.
    1/11/12 9:47:40 AM
    com.apple.backupd[1169]
    Bulk setting Spotlight attributes failed.
    That's a problem writing to the NAS drive.
    But the backup continued after all this.
    1/11/12 1:25:07 PM
    kernel
    ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x9d00b44
    Something caused a disconnect.  Can't tell from the log what it was.
    I doubt it's a problem with something in OSX being damaged or corrupted, but reinstalling OSX isn't a major hassle, so might be worth a try.
    To be incompatible with Snow Leopard, this NAS must be at least a couple of years old.  It may be beginning to fail.
    Contact the maker.  See if there's an update to make it compatible with Snow Leopard.  If so, that might fix it.
    If not, or if that doesn't fix it, see if they have any diagnostics that will shed any light.

  • WinRM cannot complete the operation. Verify that the specified computer name is valid, that the computer is accessible over the network

    The Exchange Management Shell fails to connect in Exchange 2013 environment, this is a DAG environment and previously it indicates another error message, which is in my another thread. We fixed that error by delete the retired proxy entry in the server registry,
    after that the error is gone but changed to below one, anyway the EMS still fails to connect to all servers:
    VERBOSE: Connecting to NSWVIP999WTMBX.air.abc.au.
    New-PSSession : [NSWVIP999WTMBX.air.abc.au] Connecting to remote server NSWVIP999WTMBX.air.abc.au failed with the
    following error message : WinRM cannot complete the operation. Verify that the specified computer name is valid, that
    the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows
    access from this computer. By default, the WinRM firewall exception for public profiles limits access to remote
    computers within the same local subnet. For more information, see the about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : WinRMOperationTimeout,PSSessionOpenFailed
    Failed to connect to an Exchange server in the current site.
    Enter the server FQDN where you want to connect.:
    Then it just show can't connect to all the exchange servers, from the wording it seems pointing to the Windows firewall settings for winRM, but when I look at the windows firewall found it's turned off. We use Sophos enterprise for the security, but all
    other 3 exchange servers didn't have the same issue.

    Hi Lynn,
    Thanks for your analyst and reply, I run the command as you suggested and checked accordingly to Task Manager, but seems none of them indicates a firewall or anti-virus.
      TCP    0.0.0.0:80             0.0.0.0:0              LISTENING       4
     TCP    0.0.0.0:808            0.0.0.0:0              LISTENING       2260
     TCP    172.17.2.123:444       172.16.2.127:8050      ESTABLISHED     4
     TCP    172.17.2.123:444       172.16.2.127:8069      ESTABLISHED     4
     TCP    172.17.2.123:444       172.17.2.127:8053      ESTABLISHED     4
     TCP    172.17.2.123:10952     172.16.2.68:80         ESTABLISHED     3296
     TCP    172.17.2.123:11185     172.16.2.90:8080       SYN_SENT        468
     TCP    172.17.2.123:11190     172.16.2.90:8080       SYN_SENT        15268
     TCP    172.17.2.123:11330     172.16.2.90:8080       SYN_SENT        1296
     TCP    [::]:80                [::]:0                 LISTENING      
    4
     TCP    [::]:808               [::]:0                 LISTENING      
    2260
     TCP    [::1]:6001             [::1]:8028             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8029             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8030             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8031             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8032             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8033             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8034             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8035             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8036             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8037             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8040             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8041             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8048             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8049             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8059             ESTABLISHED     4764
     TCP    [::1]:6001             [::1]:8060             ESTABLISHED     4764
     TCP    [::1]:8028             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8029             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8030             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8031             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8032             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8033             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8034             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8035             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8036             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8037             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8040             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8041             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8048             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8049             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8059             [::1]:6001             ESTABLISHED     9980
     TCP    [::1]:8060             [::1]:6001             ESTABLISHED     9980
     TCP    [fe80::9054:e8f5:f885:8105%20]:808  [fe80::9054:e8f5:f885:8105%20]:9901
     ESTABLISHED     2260
     TCP    [fe80::9054:e8f5:f885:8105%20]:9901  [fe80::9054:e8f5:f885:8105%20]:808
     ESTABLISHED     4868
    This is the full result, among them
    4 -- System -- NT Kernel & System
    468 -- There is no process associated with PID 468
    1296 -- svchost.exe -- Host Process for Windows Service
    2260 -- SMSvcHost.exe -- SMSvcHost.exe
    3296 -- CcmExec.exe -- CCM Executive
    4764 -- Microsoft.Exchange.RpcClientAccess.Service.exe -- Microsoft.Exchange.RpcClientAccess.Service.exe
    4868 -- Microsoft.Exchange.ServiceHost.exe -- Microsoft.Exchange.ServiceHost.exe
    9980 -- w3wp.exe -- IIS Worker Process
    15268 -- ServerManager.exe -- Server Manager

  • When I try to export the file in word, I get the error "The Save as command has not been able to develop this document. Unable to create file"

    When I try to export the file in word, I get the error "The Save as command has not been able to develop this document. Unable to create file".
    Win7 Pro, 64bit
    Acrobat XI Pro, tryal

    Create a one word pdf file. Try converting to word. If that fails, try a complete uninstall, run the cleaner tool, then re-install.
    Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs

  • MAC OS:Word cannot locate the server application for AcroExch.Document.7.objects

    In MAC OS,installed Adobe reader ,When I double click a pdf file in Word2011,it shows"Word cannot locate the server application for AcroExch.Document.7.objects".what can i do to fix it?

    I found out through someone else. The "how to" find the place to add it was more challenging.
    Instructions:
    1. Take the Webarchive file and save it on your computer (anywhere is fine).
    2. Open MacMail and go to preferences>signatures and create a signature with any name and filler text. Close Macmail.
    3. Open your finder, go to the "Library" folder. If you cannot view your Library folder, open up "terminal" and simply paste in: chflags nohidden ~/Library/
    (this will allow you to view your Library folder from now on)
    4. In your library folder, go to Mail>Mail Data>signatures
    5.Copy the name of the signature file that is already in the signatures folder. It should look something like "079ADD83-A19F-4597-BBFC-4F35858894DE" After copying that name, delete the file.
    6. Go to the webarchive file you saved and rename it the name of the file you just deleted. Then paste that into the library>Mail>Mail Data>signatures folder.
    7. Open your macmail and see if it worked!
    If my directions are not clear, you may find the following article helpful from step 5:  http://code.coneybeare.net/how-to-make-an-html-signature-in-apple-mail-f
    Now here's how I managed to find my Library/Mail in OSX 10.7.3:
    Menu: Go
    Choose: Home
    Library
    Mail
    Vs
    Mail Data
    Signatures
    Hope this helps!

  • ERROR :SCRIPT7002: XMLHttpRequest: Network Error 0x2efd, Could not complete the operation due to error 00002efd. File: default.html

    Hi ,all
    I am beginner for windows 8 app development.
    I created simple project on domain name called www.aaa.com and also hosted web services on same domain. at that time i was able to access web services on my application code using AJAX. Then i created same project on another domain called www.bbb.com then
    i tried to access wcf services from www.aaa.com domain. at that time my javaScript console is throwing this error "SCRIPT7002: XMLHttpRequest: Network Error 0x2efd, Could not complete the operation due to error 00002efd.
    File: default.html". I tried some thing on both end on web services project as well as windows 8 app.
    AT app side in package.appxmanifest file i added below code.
    <Capabilities>
        <Capability Name="privateNetworkClientServer" />
        <Capability Name="internetClient" />
      </Capabilities>
    AT web services side in web.config file i added following settings.
    <serviceHostingEnvironment aspNetCompatibilityEnabled="true"
            multipleSiteBindingsEnabled="true" />
        <standardEndpoints>
          <webScriptEndpoint>
            <standardEndpoint name="" crossDomainScriptAccessEnabled="true" />
          </webScriptEndpoint>
        </standardEndpoints>
    but above all diagnostics are not working for me.
    and one more thing at www.bbb.com domain in sample android app while i am trying to consume my wcf services it is working fine. the problem is specifically for windows 8 app only.
    Here is sample code which i had written in default.html file
    <!DOCTYPE html>
    <html>
    <head>
    <meta charset="utf-8" />
    <title>DemoWebService</title>
    <!-- DemoWebService references -->
    <script src="/js/default.js"></script>
    <script>
    var personNameVar = "Hardik";
    var dataIn = '{' + '"personName":"' + personNameVar + '"}';
    $.ajax({
    url: "http://SomeIP:SomePort/Service1.svc/HelloWorld",
    type: "POST",
    contentType: "application/json; charset=utf-8",
    data: dataIn,
    dataType: "json",
    success: function (data) {
    var object = JSON.parse(data.d);
    if (object.Error == '') {
    $('body').html(object.Response);
    error: function (error) {
    $('body').html(error);
    </script>
    </head>
    <body>
    </body>
    </html>
    so is there any help. I am eagerly waiting for it.
    P.S I am accessing www.aaa.com web services using VPN.
    Thanks in advance,
    Hardik

    In that case, I recommend that you collect a Network trace using a tool such as Microsoft Network Monitor or Wireshark to understand what IP Address is the connection being made to. The 0x2efd error correlates to the WinINet error: ERROR_INTERNET_CANNOT_CONNECT
    meaning that the connection with the remote server cannot be established. When you collect a network trace, try looking for the TCP-SYN signal and see whether your remote server responds with a SYN-ACK.
    Windows Store Developer Solutions, follow us on Twitter:
    @WSDevSol|| Want more solutions? See our blog

  • WINRM error : The WinRM client cannot complete the operation within the time spe cified

    Dear All
    Please find
    We have developed a management pack on RMS which is analyzing information from linux by using module with calling winrm.
    In mentioned module before calling winrm through netcat , the agent status will be controlled on target host.
    But this error on specific sles host will halt the executing workflow .
    This workflow will working successfully after couple of intervals and again the error coming up.
    Although the workflow is halting by the mentioned error a  task that used the same module is working fine without any error on that host and
    This workflow is running on other instances of the discovered class correctly
    (on SLES hosts sles11 and sles10 64bit) .
    Error :
     The WinRM client cannot complete the operation within the time spe cified. Check if the machine name is valid and is reachable over the network and  firewall
    exception for Windows Remote Management service is enabled. Error number:  -2144108250 
    The WinRM client cannot complete the operation within the time specified. Check if the machine name is valid and is reachable over the network and firewall exce ption for Windows Remote Management
    service is enabled.
     Linux host :
    SLES 10 32 bit
    SP2

    Hi,
    Any error or warning for the operation manager log under event viewer?
    Based on my research,
    Possible Causes for this issue:
    The host is unreachable due to incorrect name resolution, network outage, or
    host outage
    A network or host-based firewall is blocking TCP port 1270 connectivity to the target host
    Resolutions
    Verify that Management Server can ping the agent host by Fully-Qualified
    Domain Name
    Verify that no network firewalls or host firewall is blocking TCP port 1270
    In addition, check whether you have heartbeat failures in your environment for linux, if so, please go through the below link:
    OpsMgr: UNIX/Linux Heartbeat Failures After Applying KB2585542
    http://operatingquadrant.com/2012/01/12/opsmgr-unixlinux-heartbeat-failures-after-applying-kb2585542/
    Hope this helps.
    Regards,
    Yan Li
    Regards, Yan Li

Maybe you are looking for