WORD doc missing text from yesterday and goes missing on backup drive

Another mystery from the WORD kingdom. I just opened the WORD doc I work on each day (it's a blog) and noticed that last night's entry is completely GONE. I do saves as I go along and know that when I put it to bed for the night it was intact.
So, I figure, no worry, I will just go to the external drive and get it from there. I double click on the document within the backup finder window (I see it sitting there) and POUF - it disappears! GONE!
I just copied and pasted the entire text of the document into a new WORD doc and gave it a new name. Maybe somehow the file got corrupted??? I will also take a third measure and mail the document to my yahoo account, as an attachment and also with the text in the body of the email. Hopefully I will be covered now.
But this is very scary. It could have been another document or whatever. WHAT HAPPENED?
I'm going to run disk utility and verify/repair permissions. Or maybe I am doing this too much already. I have no idea.
Anybody have an explanation for what could have happened and how to avoid it happening again?
Thanks!

Call MS tech support. This happened once to me. It may have just been a memory/save problem. It probably wont happen again. At least this gives you something to blog about?

Similar Messages

Copying text from emails and Word into a GoLive 9 webpage

Most of my web work involves copying and pasting text from emails and/or Word onto a page created in GoLive and uploading it to the web. In the past this has never been a problem with previous versions of GoLive. Now with GoLive 9, I constantly get extra characters appearing such as "" where almost every space is located between sentences. Foreign characters often appear as strange symbols whereas they copied over perfectly (French and German-type accents etc) before.
When I copy something I now have to go to a menu item [type/HTML/paragraph format] to turn "paragraph" off which helps get rid of the extra formatting not wanted (often everything appears in a large bold font, even though it wasn't like this in the original document). Also until I turn off "paragraph" I am unable to align any of the text as it has a mind of its own, regardless of what the webpage is specifying, (ie left alignment, centred etc).
Is there any way to copy and paste text without having to editor and reformat it - just as one used to do in all previous versions of GoLive?

That is an interesting idea but is still really a lot of unnecessary mucking around when GoLive 9 should do all this automatically with no fuss at all. I have been using GL since its early PageMill days and never had this problem before.
I understand what you mean by using a blank page - I might give it a try.
I found CS2 was getting slower and slower on my PowerPC. I now have an Intel iMac. Sometimes I would go to open a GL file and I could make a cup of tea waiting for it to open (admittedly it was a large file with lots of table cells and photos). Now I can open the same file in a few seconds using GL9. I looked up the Adobe support for 10.5 and it was listed as having issues which wouldn't be resolved. Photoshop Elements 4 was listed the same yet I had had no problems with it. A friend had huge problems with InDesign when he changed to 10.5. I guess it varies from computer to computer.
Only yesterday my GL9 refused to open and thanks to these forums, we found out that yesterday's Opera browser update was the culprit. Having had such quick success using these forums I thought I would give this annoying copying problem a try and see if there was some setting I could change or something I could do to correct the fault.

Today i purchased exportpdf. when converting from pdf to word doc, the text does not show up on word doc. what to do?

when exporting pdf into a word doc the text does not show up on new doc. what to do?

Hi hamsa142,
Is this problem specific to one file, or does it happen with any file that you convert to PDF? How was the PDF created (using what application)?
For starters you may want to disable OCR as described in this document: How to disable Optical Character Recognition (O... | Adobe Community.
Please let us know how it goes.
Best,
Sara

Why can't I edit the Word doc I converted from a PDF?

Why can't I edit the Word doc I converted from a PDF?
Help! That is why I bought this software!

Hi linda007,
If you can't edit the file once it's converted to Word, it could be that the PDF was created from a scanned page, and then image text wasn't converted to searchable text. ExportPDF should perform Optical Character Recognition by default, but it can be disabled in Reader. Do you know whether OCR was disabled when you converted the page? If it wasn't, make sure that the correct language was selected for OCR. This option appears at the bottom of the ExportPDF panel in Reader, and in the Document Language (for Text Recognition) pop-up menu that appears after you select your file to convert in the ExportPDF online service.
If everything seems to have been set correctly, and you still can edit the text, please try triple-clicking to select the text in Word. Did that do the trick?
Best,
Sara

Just today web-sites I frequent like reddit, oregonlive and even FB started taking forever to load. I've made no changes from yesterday and today. Any thoughts?

Question
Just today web-sites I frequent like reddit, oregonlive and even FB started taking forever to load. I've made no changes from yesterday and today. Any thoughts? edit

asdfjava-er wrote:
The book that I'm using said it wasn't necessary for this because it's supposed to just make sure everything is working properly--which it's not.OK, if you want to ignore my advice, so be it, but please don't complain that it is not going to work without even trying it yourself.
asdfjava-er wrote:
Now this is the part I don't get. The book tells me to go to http://localhost:8080/ch1/Serv1 even though there are no files/folders that have the name Serv1.
Do you understand what the <servlet-mapping> declaration in the web.xml means? It is roughly just saying the appserver that it should port all requests on /Serv1 to the mentioned servlet.
a couple others like/ch1/WEB-INF/classes/Ch1Servlet.class and /ch1/WEB-INF/web.xml. The WEB-INF folder is not public accessible, so forget about that part.
"Resource not found" simply means that either the URL is wrong (case counts!) or that the resource is actually not there. I.e. not compiled, not deployed, not loaded, etcetera. Reading the appserver's startup logs might also help.

Im from canada and going to spain will a spaniard sim work on a canadian iphone?

im from canada and going to spain will a spaniard sim work on a canadian iphone?

If your phone is officially unlocked and the Spanish sim you want to use is from a supported iPhone carrier, you will have no issues. If your phone is not officially unlocked, you can't use any sim other than a sim from the carrier your phone is locked to. So, is your phone officially unlocked?

HT201342 My email is not arriving on my computer. The icon from get mail just keeps swirling. Yesterday I had many messages on the account. Today there is only one from yesterday and then there is a jump in time back to April 16 with no messages inbetw

I cannot get me.com mail on my computer today. The icon just keeps swirling. I have one message from yesterday and then it drops all read messages back to April 16. I have restarted the mail program several times.

Hello carouselmusic,
It sounds like you cannot get your iCloud email to download to the Mail app on your Mac. I would use the following troubleshooting to help resolve that from the article named:
iCloud: Troubleshooting iCloud Mail
chttp://support.apple.com/kb/ts4002
If you can't receive mail in OS X Mail
Locate the name of your iCloud account on the left side of the main Mail window. If your iCloud account name is dimmed and has a lightning-bolt symbol next to it, your account is offline. To bring your account online, make sure that your computer is connected to the Internet, then choose Mailbox > Take All Accounts Online. If that doesn't resolve the issue, follow these steps:
Choose Preferences from the Mail menu.
Click Accounts in the Preferences window.
Select your iCloud account from the list of accounts.
Click the Advanced tab and verify these settings:
Port: 993
Use SSL: (selected)
Authentication: either "Password" or "Apple Token"
If this does not resolve the issue, then use the following to remove, and then re add the account:
To remove an email account in Mail:
Open Mail (click it on the Dock or open it from the Applications folder).
From the Mail menu, choose Preferences..., or press Command-, (the Command and comma keys).
Click the "Accounts" icon.
Select the account you wish to remove.
Click the "-" (minus) icon. You will be alerted that "The account's setup information, mailboxes, messages, notes, and to do's will be deleted permanently from your computer."
If you are sure you want to remove the account and email messages from your computer, click "Remove" to complete this process.
And
Open Mail.
Choose Add Account from the File menu. If this is the first time you've opened Mail, you will be automatically prompted to add an account.
Enter your Full Name, email address, and password. See Mac 101: Mail article for more information.
From: Configuring Mail for your email account
http://support.apple.com/kb/ht1277
Thank you for using Apple Support Communities.
Cheers,
Sterling

How do I start Imac from scratch and the install my backup stuff anew

How do I start Imac 10.9.2 from scratch and the install my backup stuff anew

See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs,
Macintosh OS X Routine Maintenance,
Mac troubleshooting: What to do when your computer is too slow,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information.

I am switching from an iphone 4s to a 5s. When I try to restore from icloud and then choose a backup, it tells me "No iCloud backups are compatible with the version of iOS on this iphone." How can get into my new phone to update?

I am switching from an iphone 4s to a 5s. When I try to restore from icloud and then choose a backup, it tells me "No iCloud backups are compatible with the version of iOS on this iphone." How can get into my new phone to update?

UUpdate the new iphone to iOS 8.3 before you try to restore the backup.

How do I backup my Itune Library and Playlists to my Backup drive?

How do I backup my Itune Library and Playlists to my Backup drive? Where are they stored on my computer?

For iPhoto, see > iPhoto: How to move the Library folder to a new location
For iTunes, see > iTunes for Mac: Moving your iTunes Media folder

URGENT: Copying text from word doc to text module in smartforms

Hi ALl
I have a problem, when i copy texts from word documents to smartforms, some words getting clubbed together. there is no space. I tried justified and left aligned. In both i am getting problem like this. Is there any special way to copy and paste the text to text module from word.
Thanks
Murali

Try to copy to notepad first, then copy to the text module.

Acorbat Pro xi word integration strips text from pages

Hi,
I have Acrobat Pro XI and Ofice 2012, both fully up to date.
When creating a PDF from the Acrobat tab on the ribbon, Acrobat will create the PDF but will strip the text from the first page. It leaves the pictures on the page, only removes text. If I select the "Different First Page" check box in "Headers and Footers", the PDF document is created sucessfully. This is not going to be acceptable.
This issue has only come about since the update to XI from X. I have removed XI and installed X again to test, X still works and XI does not.

Found the problem.
Adobe, I found a BUG. I want a year of cookies. Not the virtual type, I want real cookies. Chocolate. Maple.
Word 2013 ...
Create a doc and put some sort of FIELD in the footer. I used STYLEREF and choose a Style. That's a very common thing to do for keeping the title of your document in the footer.
Now ... insert a SHAPE. Make that shape sit BEHIND the text.
DONE.
Create your PDF. The text won't be visible.
BUG.
Cookies.
Chris.

Using Word doc after converting from PDF

I have just purchased Adobe Export PDF purely to complete a Job Aaplication form in Word rather than PDF but the Word document does not allow me to edit it properly - i.e. I cannot expand the text boxes to make them bigger and when I try to add in information like my name and the post I'm applying for, it moves existing text from the original PDF doc onto different lines. I assumed once I'd converted it I could use it like a normal Word doc but it seems not. Please advise what I'm doing wrong, thank you.

Hi Disc9,
In order to help you. Let me know which application of Adobe you are using including the version.
Also let me know the complete workflow how you convert the PDF to docx/doc.
Regards.

Can not edit Word docs after converting from a ExportPDF file. The PDF file is converted into a non-editable Word Doc image.

Converting a PDF file (scanned copy Adobe Reader X) to a Word Doc using ExportPDF conversion. The Word Doc created is a image file which is not editable. I need an editable Word Doc file.

Hi robertw,
Can you please tell me more about how the PDF was created? (If you don't know, choose File > Properties, and look for the PDF Producer on the Description tab.)
If the PDF was created by a third-party PDF creator, it may be that it's not well-written, and that can affect the quality of the conversion. See Will Adobe ExportPDF convert both text and form... | Adobe Community.
That said, you may be able to select the text by triple-clicking in the Word document.
Please let us know how it goes.
Best,
Sara

How to secure word docs, access only via username and password?

I have created a CMS (Content Management System) where
residents can access publicly made available word documents
uploaded via the web by authourised members of a residents
association. (no password needed)
password only needed to upload
I have also created a section for excecutive members only
where documents for coming meetings are kept, but are not yet
available to general residents. (password is needed to view these)
All works fine apart from the executive section, all the
documents seem to get 'spidered' no matter what is in the robot.txt
file.
this i know as i have been tracking visitors to it.
the pages are not yet live or in use as i want to be sure
that these 'not for public viewing' file are not viewed until they
are in the public folder.
each section will have their own folder, but google has
'spidered' all pages! it seems that google and other sites are not
taking notice of the robot.txt, i have read on some sites that this
is common. how they do this is beyond me, i though that you could
only spider a site that had a home page and that you follow all
links contained within this initial page.? seems that this is not
the case.
what other methods can i try out that will protect these
files.
(please do not reply with, do not put them on the site!) i
have had this with other forums in the past.
only sesible answers please.
and thank you in advance for your time.

i have been busy looking around but not finding anything.
My PHP scripts at present accept the word docs and store them
in folders, lets say, www.site.com/secretfolder/...
One suggestion is to have them in a database, this is not
idea, but is going to be the last resort.
the idea i like most is to have the outside the root www
folder.
what i am not sure of is how i allow access to them if normal
access can not be used. i.e. www.site.com/myfolder/file.doc
one way that has been suggested is streaming but this
completely eludes me, i first thought streaming was for sound and
video, but that aside, please can someone provide some links to
sites that show some examples or more information on how i do this.
i do not need the file to be uploaded as i can change my
scripts to upload to the new folder that is outside the root www
folder, what i do not understand is how i get the file back from
this outside root folder to the user that is wanting to view it.
my way of thinking is to create a temp folder inside the www
folder but this means that the files will then be available to the
robots again and if i was to have the folder cleaned after the file
is taken what happens if the server or the persons pc was to crash
or something, then the script will not complete and the file will
still be available to view by the robots.
or is their another way

WORD doc missing text from yesterday and goes missing on backup drive

Similar Messages

Maybe you are looking for