Word document links not converting to WebHelp

I have an Word 2007 document that contains hyperlinks to send
an email and to jump to another place in the same document. I
imported the document into my RoboHelp project and all looks fine.
But when I create the WebHelp the links do not work. This is my
first really using RoboHelp. I had previously did "Save As..html"
in Word and then used HTML Workshop to create chm files. The links
in there work fine.

No, creating a chm does not work either. It seems whatever I
mark using "Hyperlink" in Word does not convert over to the
appropriate HTML tags. I looked at the html source and it basically
just has font info (underline, etc) - no link info.

Similar Messages

Word cross references not converting to hyperlinks

The cross references (i.e. {REF Welcome \h}) to bookmarks in
my Word document are not converting to hyperlinks in the HTML when
I have "Convert references into hyperlinks" checked when importing
the Word document (either in doc or docx format). This did work
with the older version Robohelp 5. Is there a setting I'm missing?
Thank you!
Pat

You said you've tried mapping styles.
I solved a similar situation. This involved a FrameMaker book imported by reference to RoboHelp. A cross reference to the paragraph style "Figure Title" was not getting converted.
I realized that in RoboHelp, I had mapped "Figure Title" to "None" or no output. (I do not want figure titles appearing in the online output, only in print).
Therefore, since the style was not mapped, the content was excluded and the cross reference did not get converted.
A different situation, but perhaps it can point you in the right direction.
Try changing the cross reference in FrameMaker to the next nearest heading, table title, or figure title. See if that makes a difference.
Make sure all the styles from each of your FrameMaker files is mapped to a RoboHelp style.

Word documents won't convert when combining

Similar to a problem from another post, Word documents will not convert when combining files. I’m only combining a few files at a time—when placed first, the Word document will stall at 10% converted. When placed anywhere else, it skips with an error saying it's unable to open the file, "please check to see if [ I ] have read permission for the...file." (It's my computer; who do I have to ask?) Other files convert/combine just fine (.png, jpeg’s.) I’m using a 32 bit version of XP and I do have the pdf converter from Word installed as an add in. Very annoying problem. Can anyone help?
Thanks

If you upgrade word the documents switch from .doc to .docx

The converted word document is not easily edited without having to correct the scewing, etc.

the converted word document is not easily edited without having to correct the scewing, etc. The final edited document is not suitable.

> I was able to get the first column resized and can
> see more text, but this also reduced the size of the third column
> automatically,
This sounds more like Word than Indesign. I've never been able to resize
a column in Word without messing up the column next to it. There's
probably a way to make Word columns behave properly; I just don't know
Word that well.
In Indesign, to make table columns act the way you're describing, you
must be either dragging the column wider from the left side; or (2)
holding down the shift key while you drag. Otherwise, making a column
wider just makes the table wider.
Try dragging from the right side without the shift key. You can also
select part or all of the column, go into the Table palette, and set the
column width exactly, by numbers (which is what I usually do, because I
like to make sure that my table adds up to exactly or less than the
width of the text column).
Sometimes I need to make my tables wider than the page, temporarily,
just so I can see everything in them and decide where I can lose enough
space to fit the whole thing on the page. Remember that you can reduce
cell insets, as well.
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Word document links won't open in IE 9

I got a user who cannot open up a word document link in sharepoint online that should display a word dialog box basically in IE 9. When clicking, nothing happens even if pop up blocker is off, but he can access the word documents from the link in Firefox.
I also found out that I am able to open it up under my windows profile on that machine so it must be a corrupted windows profile.
I reset IE
Cleared cache
Verified in registry in class roots that .html is set to htmlfile
Anything I can do besides redoing the user's windows profile?
Best regards, Joe C Partner Online Technical Community ----------------------------------------------------------------------------------------- We hope you get value from
our new forums platform! Tell us what you think: <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads 
</a>------------------------------------------------------------------------------------------ This posting is provided "AS IS" with no warranties, and confers no rights <hr>

Can you try Firefox Safe Mode to see if the problem goes away? You can restart in Firefox Safe Mode by either:
* Clicking the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and selecting ''Restart with Add-ons Disabled'', or;
* Holding the '''option''' key while starting Firefox.
If the issue is not present in Firefox Safe Mode your problem is probably caused by an extension, theme, or hardware acceleration.
Let us know how you get on.

Add new document link not working in upgraded sharepoint 2013?

Hello there,
Upgraded SharePoint team sites from 2010 to 2013. add new document link not working for shared document in upgraded sharepoint 2013?. it is specially not working on machine where Office web apps set up with this sharePoint server and it
is working fine with environment Office web apps not configured with Sharepoint.
Looking resoluion /suggestion, thanks in advance.
Regards,
Sushil

Hi Sushil,
According to your description, my understanding is that the add new document link was not working on machine where Office web apps set up with this SharePoint server after you upgraded SharePoint team sites
from 2010 to 2013.
For your issue, it can be caused by integrating Office Web Apps with upgraded SharePoint Site.
Firstly please make sure claims-based authentication is used by the SharePoint web application that is used to create the new document. Only web applications that use claims-based authentication can open
files in Office Web Apps. To determine the authentication provider for a web application, follow these steps:
1.In SharePoint 2013 Central Administration, click Manage web applications.
2.Select the web application that you want to check, and click Authentication Providers on the ribbon.
The authentication provider must be displayed as Claims Based Authentication for Office Web Apps to work correctly with the web application. To resolve this issue, you can delete the web application and recreate
it using claims-based authentication, or you can change the authentication method of the web application.
Secondly, make sure the WOPI zones match on the SharePoint 2013 and the Office Web Apps Server farm.
To do this, run the following command on the SharePoint Server:
Get-SPWopiZone
The result will be one of the following:.
internal-https
internal-http
external-https
external-http
Next, run the following command on the SharePoint Server.
Get-SPWOPIBinding
In the output, look for WopiZone: zone. If the results from Get-SPWopiZone don’t match the zone that is returned by Get-SPWOPIBinding, run the Set-SPWOPIZone -Zone cmdlet on the SharePoint Server to change
the WOPI zone to match the result from Get-SPWOPIBinding.
If not work, you can try to disconnect SharePoint 2013 from Office Web Apps Server and re-configure Office Web Apps for SharePoint 2013.
For more information, please refer to the article:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Just updated to Lion. Didn't realize things like reading a Word document would not be supported. How do I get these files back and how I do read them going forward? When a PC user sends me a word document won't I be able to open it and read it?

Just updated to Lion today, 11/22/11. I did not realize things likes reading a Word document would not be supported. "You cannot open this because PowerPC applications are no longer supported." How am I supposed to read and open Word documents from PC users? Any insight is helpful, thanks!

You have Word 2004 which is PPC based. Lion is not able to execute PPC code. You have to upgrade. Or you can do as I do an open them in Pages, since I refuse to allow anything from Microsloth on my Mac.
Allan

How do I edit a word document that was converted from a PDF

How do I convert a word document that was converted from a PDF

To convert a Word file to PDF:
(1) Use Acrobat XI (File - Save As Other - Microsoft Word - .... )
(2) Use Adobe's online subscription service "PDF Pack"
To cleanup a Word file created from the export of PDF page content -
Open the DOCX, DOC, or RTF with MS Word.
Perform edits, corrections, etc (cleanup).
Be well...

HT1284 How can I backup word documents and not have them crowd my screen? Thanks.

Hi. How can I backup word documents and not have them crowd my screen? I know, you guessed it. I'm a novice, but not ashamed!

Please explain what you mean when you say backup Word documents crowds your screen.
I don't see any connection between backup and your screen.
Allan

The word document dose not check my spelling and grammar anymore even I have reset many times..What shall I do?

The word document dose not check my spelling .... What shal I do? through I have reset many times..
Thank you.

Hello 7513,
I'd recommend enabling disk mode on the iPod, then restoring via iTunes as detailed in the following article.
iPod Displays a Red "X" Icon
http://support.apple.com/kb/TS1463
Cheers,
Allen

My word document is not responding and I did not save it prior to this event. I don't want to loose my work. what should I do?

my word document is not responding and I did not save it prior to this event. How do I fix this without loosing my work?

Open a new document in the TextEdit application and copy and paste the contents of the frozen Word document in the new TextEdit doc and save to your desktop. Force close Word if it won't close normally, reboot the PC, open the TextEdit document you previously created and copy the contents from the TextEdit doc back into a new Word document and hopefully all will be well.

Link to external Word document does not work (in RoboHelp 8)

I am trying to insert a link to an external MS Word document (.doc) from HTML help (.chm) using RoboHelp for Word (version 8). When I compiled in WinHelp 2000 format, I used the EF macro to do this. We converted our Help project format and now the EF macro doesn’t work when compiling HTML Help. Is there a way to do this?
By the way, I need to stick with using RoboHelp for Word. Although I’d prefer to use RoboHelp HTML, my help project won’t convert correctly to RoboHelp HTML.

First of all, is it just this one project that has a problem compiling? Can you compile one of the tutorial projects? If so I think this may require a bit of dectective work to see what is causing the issue. Take a copy of your project. Now delete half the topics and see if it compiles. If it does, add some more content and compile again. If it doesn't compile, compile the other half. As a result of these actions (and by repeating) you'll be able to narrow down what the issue is.
Read the RoboColum(n) for mutterings on RoboHelp, Technical Communication Suite and technical communication.

Hyperlink word with bookmark not converted in HTML

Hi,
I use RH10 to create an HTML help from several Word documents.
I have a problem with Word hyperlink that is not converted in the HTML output. In my RH10 project, i have 2 link word document. I created with Word an hyperlink with bookmark in a document called docA.docx on another Word document called docB.docx. The docB.docx document contains the bookmark called by the docA.docx document. The hyperlink property in Word is "docB.docx#myBookmark".
This hyperlink works fine with Word, when i clic on the link in the docA.docx the docB.docs document is open by Word.
Problem appears when i update the word document in RH10 to generate HTML document. The HTML hyperlink token href="" is generated so there is no hyperlink on the HTML output.
When i remove the bookmark in the Word document the HTML hyperlink token href="docB.docx" is generated. So i don't know if it's a RH10 bug or if this feature is not supported by RH10.
For information, i used hyperlink with bookmark because cross-reference is not allowed with multiple document.
Regards,

your example show a conversion of a cross-reference in Word.
I'm talking about classic hyperlink in Word.
Clic on hyperlink
Select an another Word file containing a bookmark
Clic on the "Bookmark" button in english version of Word ("Signet..." in my french version) and select the bookmark
When you clic on "OK" button the hyperlink path is updated with the bookmark
And this path link is not converted in the HTML generated by RH. If i change the "#" by another character the generation is ok.

Visio drawings embedded in Word documents don't convert correctly

Hi,
Windows XP, with all available patches.
Word 2007, with all available patches.
Visio 2002, with all available patches.
Acrobat X pro (trial at this point) with all available patches.
I have some long word documents that have many visio drawings embedded within them. When I try and convert the word document to a pdf using the Adobe Acrobat tab that gets installed within Word, I find that the document gets converted without any errors, but when I view the document, some of the Visio drawings are not displayed correctly. In particular, the arrows at the ends of many of the connectors are missing.
Is this a known problem? Is there a reasonable workaround available?
I have tried severl other PDF creators and they work with no problem - the Adobe Acrobat is the only converter I have tried that exhibits this behaviour, and at the moment it is preventing me from buying the full version.
Thanks for any assistance you can provide.

Hi ,
If you look down the reply typing section you will find 'Attach Files' box . You can attach the files there , much like I have done in my previous post .
If you cannot still do that you may go to acrobat.com ,create a free account (if you don't have already) and upload the files to your account and pass on the Link to the files here on the forums .
Let me know in case of any issues .
Thanks,
Apoorv

Import of Word Document is not working

Hello, I wanted to import a word document but it is not
working. Draging droping is not working (just puts me link) and
through the menu (File > Import > Word Document ... ) is not
working.
Does somebody knows why.
Here is an image:
Image
Dreamweaver Menu

Good catch! Thanks, Alan.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alan" <[email protected]> wrote in
message
news:C5B334E2.31EDC9%[email protected]..
> your first screenshot-
>
>
http://www.janik.cc/b/dreamweaver-word-im.jpg
>
> shows an icon in the bottom bar for OpenOffice.
>
> Does that machine have Word installed?
> Dreamweaver doesn't import the .doc file directly, it
uses part of Word to
> do it. If Word is not installed, the Word import into
dreamweaver will not
> work.
>
> --
> Alan
> Adobe Community Expert, dreamweaver
>
>
http://www.adobe.com/communities/experts/
>
>
>

Word document links not converting to WebHelp

Similar Messages

Maybe you are looking for