Word documents (New and Existing) paper area does not work correctly

Hello all. I have a rather hard to explain situation with one of our workstations. It is an HP 8760w and it has had Office 2010 installed on it for quite some time. Currently, when opening a new document or any existing document, the program will look normal
but will not show a cursor on the page. Scrolling wll result in the page looking obscure as if a graphics inside the document stops working. Scrolling will cause lines of text to melt into each other and will duplicate lines of text. The ribbon functions fine
and hitting File brings up the entire menu like it should. Switching back to the document will show what was over that section in the file menu. How do I fix this? Installing and uninstalling office did not work along with changing the Normal.dot and deleting
the Data registry file.
All help is appreciated greatly.

Hi Travis,
This sounds more like a Graphic Driver or Graphics Card problem. You might try switching out the Graphic Card if that is possible on the system.
Another outside possibility might be a corrupt user profile, so you could create a different profile on the machine and try it. However, my guess would be the Graphics Card is failing.
Are you also certain there are no other Office add-ins loaded that might be causing this. Start Word in Safe Mode and see if this clears the problem. If it does, then systematically disable add-ins one at a time until the culprit is found.
Hope this helps
Kind Regards, Rich ... http://greatcirclelearning.com

Similar Messages

Help! Working with Kethley GPIB and NI DIO-24 does not work correctly.

Who encounter the same problem ?
tahnks a lot david.

If you are using LabVIEW Instrument Drivers, the following KnowledgeBase may be useful to you: http://ae.natinst.com/operations/ae/public.nsf/fca7838c4500dc10862567a100753500/3aa9f0de80c495d386256b98005efba7?OpenDocument.
However, if that is not helpful, I would suggest contacting Keithley for help. It sounds as though the driver for the card may not be compatibable with the Instrument Driver and you may need to do additional programming. Good luck!
-Heather S.
Applications Engineer
National Instruments

Last night I downloaded the latest Word update. Today the first Word document crashed and I lost 45 minutes of work in spite of having saved the document numerous times. Why is Word crashing the day after a safety update? I have Office 2008 for Mac

Last night I downloaded the latest Word update. Today the first Word document crashed and I lost 45 minutes of work in spite of having saved the document numerous times. Why is Word crashing the day after a safety update? I have Office 2008 for Mac

One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
Open Console in Applications>Utilities, check the system log for the date/time of the last problem & next startup for clues.

Hello everybody,i've forgot my apple password and i wanted to reset it to a new one but i also forgot the security question and the alternative email does not work and i am really need to log in to my apple i d because my iPhone 4g won't let me access it

Hello everybody,i've forgot my apple password and i wanted to reset it to a new one but i also forgot the security question and the alternative email does not work and i am really need to log in to my apple i d because my iPhone 4g won't let me access it so anyone can help me with it or can i put another apple id to it without putting the first password?THANKS FOR YOUR HELP.

Then call AppleCare and talk to someone in account security.

I have the iphone 5 and my lock button does not work. Can apple fix it or give me a new one. Can they still give me a new one even if I didn't buy my iphone 5 from them I bought it from verizon

I have the iphone 5 and my lock button does not work. Can apple fix it or give me a new one. Can they still give me a new one even if I didn't buy my iphone 5 from them I bought it from verizon

Alread asked and answered in your previous post - please do not post the same thing multiple times in multiple forums.
https://discussions.apple.com/thread/5164919

HT1212 My iPhones screen is broken(a black screen and the touch function does not work). I want to back it up, however I can't unlock it. I don't need to fix it, but i do need the information back up to new iPhone. How can i back it up?

My iPhones screen is broken(a black screen and the touch function does not work).I want to back it up, however I can't unlock it. I don't need to fix it, but i do need the information back up to new iPhone. How can i back it up?

i don't see a way for you to back up your phone, because it will require you to unlock the phone.

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.

Funny how you answer to "troll". (What's your handle on AT&T forums?)
Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction.

HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

My serial number for adobe photoshop elements 12 and premiere elements 12 does not work

My serial number for adobe photoshop elements 12 and premiere elements 12 does not work. On adobe.com it shows that the serial number I received is associated with adobe photoshop elements 9 and premiere elements 9. I have purchased those products in the past, but just recently upgraded to elements 12. I can use the the photoshop organizer, but can't open the photoshop editor.

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

Since upgrade to v29, pinned tabs don't appear and sometimes all tabs don't appear and open menu button does not work

My pinned tabs don't appear at any start and at some starts, I don't see the bookmarks toolbar (I can restore that by removing it from view-toolbars and then reselecting it). when this happens, FF also does not show any tabs and the Menu button does not work.
I have tried various suggestions found on here like deleting the sessionstore.js and re-installing FF, also tried disabling hardware acceleration in safe mode and still have the same problems.
Am reluctant to reset FF in case I lose my favourites and Bookmarks, is there anything else I can try?

Firefox may not have closed properly.<br />
You can try to update to Firefox 29.0.1 to be released tomorrow (Friday) to see if that helps with this issue.
See also:
*"Hang at exit": http://kb.mozillazine.org/Firefox_hangs
*"Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs

HT201412 my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

Here you go:
http://support.apple.com/kb/ts1559

When I open firefox before connecting (via 56k modem) or if I leave a previous section open, disconnect and then reconnect, firfox does not work, it remains offline, even though internet is connected. I have to close firefox and reopen

When I open firefox before connecting (via 56k modem) or if I leave a previous section open, disconnect and then reconnect, firfox does not work, it remains offline, even though internet is connected. I have to close firefox and reopen

Thanks for the reply. I never get the option to "Restore Previous History" from History. I don't even have the box checked that asks to delete the history when Firefox closes. I don't know what's wrong, no matter what, I always lose everything. I have the box marked "Show my windows and tabs from last time" for when I open Firefox, but it never shows that, just my homepage. Also, when I check my History, it only shows the pages that I opened since I started Firefox, nothing from before. Even if I were to open up 10 pages now, close Firefox, and open it, the history would only show the homepage that opened this time, not any of the 10 pages that I opened 5 minutes ago.

I have updated my iPhone 6 to iOS to 8.3 and the Blutooth still does not work

I Have updated mu iphone 6 to iOS 8.3 and the Blutooth still does not work in my car for hands free

Why would you expect it to work in 8.3, if it didn't work in a previous version? What troubleshooting have you done? Have you tried putting the car system into Pairing mode?

Word documents (New and Existing) paper area does not work correctly

Similar Messages

Maybe you are looking for