Word for Mavericks, PC version with Boot Camp or Mac Office 2011?

I have clients who need work in Word for their PC environment. Pages is great, but doesn't always faithfully convert design to Word. Micro#@&^! isn't my favorite for anything but I'm trying to decide if I should purchase the PC version and run it via Boot Camp or purchase Office for Mac. Any recommendations?

If Microsoft Office is a fundamental tool in your workflow, as it is in mine, then I would recommend MS Office for Mac 2011. That is the easiest way.
Cheers
Pete

Similar Messages

  • Windows 8.1 with boot camp on mac mini  troubles

    After installing a licensed Windows 8.1 with boot camp on my mac mini (2012,i7,4gb ram) my mac os Mavericks have trouble with starting,and i can't run recovery and safe mode.Another problem-i don't have sound in windows,but windows show me no troubles,and red light apear!!!Please help!

    Hello Mickaelpopo,
    Thank you for the question.  It sounds like you are trying to install Windows 8.1 using Boot Camp 5 on your MacBook Pro.  Currently, Windows 8.1 is not a supported version of Windows for Boot Camp:
    Which versions of Windows work with Boot Camp 5?
    You can use:
    Microsoft Windows 8.0 (64-bit)
    Microsoft Windows 8.0 Pro (64-bit)
    Microsoft Windows 7 Home Premium (64-bit)
    Microsoft Windows 7 Professional (64-bit)
    Microsoft Windows 7 Ultimate (64-bit)
    Windows XP, Windows Vista, and Enterprise versions of Windows 7 and Windows 8 are not supported.
    Windows 8.1 is not supported with Boot Camp 5.
    You can find more information here:
    Boot Camp 5: Frequently asked questions
    http://support.apple.com/kb/HT5639
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Installing Windows 7 With Boot Camp on Mac Pro 3.1 w/GTX285 Video card

    I have an Early 2008 Mac Pro 3.1 running the latest version of OS 10.6 with all updates.  I have an nVidia GTX285 card installed in the Mac Pro that has been working fine for at least six months under OS 10.6 with Mac drivers downloaded from the nVidia web site and installed under OS 10.6.  I replaced the ATi 2600XT video card with the nVidia GTX285 in order to have CUDA support in Premier Pro CS 5 and it works beautifully.
    I now wish to install Windows 7 Professional 64 bit on this Mac Pro.  I have never had any version of Windows installed on this Mac Pro.  I am using Boot Camp assistant and a new full version of Windows 7 Professional 64-bit.
    My question is do I need to remove the GTX 285 graphics card and replace it with my AT 2600XT before installing Windows 7?  This would be a real pain to do because the two connectors to the motherboard are hard to get to.  However, since Apple never used the GTX285 in any of its computers, I am worried that I will not have any video display when I go to try and install Windows 7 with Boot Cam assistant. 
    Please advise me whether removing the graphics card is necessary before installing Windows 7 with Boot Camp.
    Thank you in advance for responding.
    Tom

    NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
    How I would proceed -
    Install Windows on its own drive. 
    Pull all the other drives.
    Boot from Windows 7 Pro DVD
    Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
    Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
    Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
    No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
    The Mac Pro is as close as anything to a standard Wintel workstation. 
    Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
    AV-Test.org Test Security-Software

  • Antivirus for iMac running Windows with Boot Camp

    I am running Windows on my Mac using Boot Camp. If I install an antivirus, will it protect me when I am logged into windows? Or do I need to install an additional antivirus when I am on Windows?

    You only need anti-virus protection for the Windows environment, though this will likely bring out a fire storm of debate.
    The most susceptible system is Windows so protect yourself there.

  • I need help with Boot Camp 2.1! Win XP

    I have downloaded the update on Windows XP SP2, but it will not install.
    "The installation encountered errors.... Try again at a different time." That's what comes up.
    I have tried everything! The command shell thing where you have to type the path of the update file (cmd.exe), I have checked the language code (yes it is 1033) and I have downloaded the files seperately. NOTHING WORKS! I have even re-installed Boot Camp.
    I have:
    Mac Pro
    10.5.4 Leopard
    Windows XP SP2
    Any help will be appreciated!

    I have found a solution!
    Well not for installing Boot Camp 2.1 but for installing XP SP3 with Boot Camp 2.0!
    I found it on a website but I can't remember which one. But here is what I did.
    Start> Run:
    Type: regedit
    Click "OK"
    On the left side of the window there should be a panel with folders name similar to "HKEY_....". Click on:
    HKEYLOCALMACHINE> SOFTWARE> Microsoft> Windows> Current Version> Double click "Setup"
    On the window should appear a few files next to the panel on the left. The file type should have "REG" then something after it.
    Check in the "Name" column that you DO NOT have "BootDir". If you do then this is not the answer for you!
    If you don't have that file:
    Click EDIT> NEW> STRING VALUE
    Name it: BootDir
    Right click the file and go to Modify.
    Then type in: C:\ and press OK (Or if another drive is your main drive (eg. D) then type in the letter of that drive instead of C (eg. D:\)).
    Restart the computer and go into Windows again. Then download the SP3 update in whatever way you have done before.
    The installation should continue without the message saying "You need more memory" or something.
    FOR WINDOWS XP!

  • Simple how-to guide to adding windows 7 64-bit to mavericks with boot camp

    Simple how-to guide to adding windows 7 64-bit to mavericks with boot camp
    *Please note I accept no responsibility for issues occurring from the use of this guide, please use at your risk
    **Please note I do not propose or support using illegal copies of Windows software or licenses
    Required technical skill: minimal
    Required time: approx 1-2 hours
    Required items: Mac, USB drive or DVD-R
    Get a version of Windows 7 64-bit:
    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/canno t-find-digital-river-download-site/66a8439b-0d16-4b70-92f7-1c8486a46ebf
    Windows 7 Downloads are still available.
    Download the appropriate Windows 7 .ISO file which includes Service Pack 1
    (Note: must match what your product key version is for)
    Windows 7 Home Premium 32Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
    Windows 7 Home Premium 64Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso
    Windows 7 Professional 32Bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
    Windows 7 Professional 64Bit: http://msft.digitalrivercontent.net/win/X17-59186.iso
    Windows 7 Ultimate 32Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
    Windows 7 Ultimate 64Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso
    Burn this image file (.iso) to a USB drive or DVD-R:
    USB drive:
    Get a blank USB drive with 8 GB+ capacity
    Format this drive to Fat32 (Windows and Mac shared format), this will erase the drive!:
    Finder > Applications > Utitilies > Disk Utility > Partition > 1 > Fat32
    Extract the image file to the drive exposing its files:
    Finder > Applications > Utilites > Boot Camp Assistant
    Click both "Create a Win 7 or later version install disk" and "Download the latest windows support software from Apple" and advance
    Locate your image (iso) file, example: /Users/Christoper/Downloads/X17-58997.iso.download/X17-58997.iso
    Destination disk is your USB flash drive that was formatted to fat32, if it does not appear it may be in the wrong format
    Click continue, this process takes a long time (30 mins - 1.5 hour estimated), it may appear that it is freezing because progress bar stops at times, do not stop it, let it keep running.  If you are unsure it is still going, open finder > click the drive > get info, and look at the size of the files.  Then close finder wait a few seconds, get info again and see that file size is slightly larger.  The final file size was 4+ GB for me
    or DVD-R:
    I have not used a DVD-R but this is how I expect it to work:
    Insert black DVD-R
    Finder > Applications > Utitilies > Disk Utility > Burn
    Locate your image (iso) file, example: /Users/Christoper/Downloads/X17-58997.iso.download/X17-58997.iso
    Partition HD for WIndows 7:
    Finder > Applications > Utilites > Boot Camp Assistant
    Choose the 3rd option Install Windows 7
    It will ask you to select a size of your Harddrive space for Windows OS, this will eat up some of the free space on your Mac HD.  How much space is enough for a Windows OS?  Depends on how many programs you plan to install on it.  If you are just using for surfing web and running MS Office, probably 30-40 GB is enough, and this is what I did.  Remember this space will be used up from your existing HD and not usable when you are in Mac OS.  This process takes about 10 mins I think
    Install Win 7 OS:
    With USB drive in port or DVD in drive, restart laptop. 
    It will bring up the Win 7 installer on boot up
    Select the OS type that you have a registered key for
    It will ask you to find a HD to use for Win 7 OS:
    Select the HD you just created, if you try to continue it will complain that HD is wrong format (because MAC formatted it to a MAC compatible HD, we will fix this)
    Select the HD, there is a button to the right for "advanced" I believe is the text of it.  It will allow you to reformat the drive, choose NTFS which it requires.  Then proceed
    Proceed to setup Win with your preferences
    Type product key from your OS purchase or an existing one that you are moving from another machine
    Select Default Boot Drive:
    By default it selects Windows as your default OS to boot at power up, most people want Mac OSX to be the default, so this can be changed:
    Finder > System Preferences > Startup Disk > select Mac
    Enjoy having Windows on your Mac!

    Why use Boot Camp: Sometimes you need to run a windows only program.  Boot Camp lets you do that with the speed and smoothness of a full windows OS. 
    How is it different from Mac Virtual Machine: A VM allows you to run another OS simultaneously while you are running OSX, while in a window similar to any other application.  A VM is not as fast, smooth, and may have limited screensize/view.   
    Is it possible to have a VM and Boot Camp: Yes, and I do this because sometimes I want to use a VM quickly without shutting down, sometimes I want the advantages of Boot Camp
    How do I get Windows in VM: how-to here:
    https://discussions.apple.com/thread/6043251

  • HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

    Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
    P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
    my bootcamp version in windows 7 is 2.1..

    Uninstall 2.x totally
    Use CCleaner Registry tool
    Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
    BC 2.2 was XP and Vista only

  • I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit.  Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help.  Currently I am running Version 3.0.4 (322).

    I need to know which update(s) I can apply to help stabalize the system.

    Typing the body of the thread message in the title, huh? -)
    I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit.  Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help.  Currently I am running Version 3.0.4 (322).
    Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
    Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out.  --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
    You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
    I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
    Mac 101: Using Windows on your Mac via Boot Camp
    https://support.apple.com/kb/HT1461
    http://www.apple.com/support/bootcamp/
    Helpful Apple Support Resources (Forum Overview)
    Boot Camp Support 
    Boot Camp Manuals
    Boot Camp 5.0 Drivers
    http://support.apple.com/kb/DL1638
    Frequently asked question
    http://support.apple.com/kb/HT4818
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
    https://support.apple.com/kb/HT4569
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    http://www.apple.com/support/bootcamp/
    Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
    Yes, you can download the Boot Camp 5 Support Software here.
    http://support.apple.com/kb/DL1638
    How do I use the Boot Camp 5 Support Software I downloaded from the web page?
    The download file is a .zip file. Double click it to uncompress it.
    Double-click the Boot Camp disk image.
    Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
    Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
    Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
    When your system restarts your Windows 8 installation is done.
    Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
    How do I format USB media to the FAT file system?
    Use Disk Utility to format a disk to use with a Windows computer. Here's how:
    Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
    Open Disk Utility.
    Select the disk you want to format for use with Windows computers.
    Click Erase, and choose one of the following from the Format pop-up menu:
    If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
    If the size of the disk is over 32 GB, choose ExFAT.
    Type a name for the disk. The maximum length is 11 characters.
    Click the Erase button and then click Erase again.
    Which versions of Windows are supported with Boot Camp 5?
    64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

  • A Potential Convert Looking for Some Help with Boot Camp

    I posted this in the Macbook Pro forums, and somebody directed me here. Hopefully you can help me with my questions.
    Hello,
    I have been a PC user ever since I can remember. I have loved the operating system and have had a Dell Laptop for 4 years now without any problems at all. I have no qualms with the Windows Operating Systems. But, it is time for me to get a new laptop, as I will soon be heading off to college. I was thinking about getting another PC, as they are significantly cheaper than the lower-end MBP that I would get, but I was also thinking about trying out a Mac. I plan on using this laptop for most of my undergraduate education though, so I don't want to buy something and find out it isn't what I want or I can't use it. So, if you would help me, I would like to ask some questions about the lower-end Macbook Pro, and I may just end up getting one.
    First things first, I am going to be going into engineering, likely mechanical or systems, at either WPI, Northeastern, or Tufts. Ah the experience of choosing colleged. I know Tufts uses AutoCAD, WPI uses SolidWorks, but I am not sure which Northeastern uses. Either way, I most certainly will be using a CAD program. I know that most CAD programs do not work on Macs, so I will likely be using Boot Camp. I have though seen on these boards that the AutoCAD licensing does not work with Boot Camp, or that some users have faced major problems with it. If this is so, then it is highly likely that I will be unable to get a Mac as that program is going to be an absolute necessity. Even if this is just a small percentage of the population, I do not want to find mine being of major issue. For those of you who have gotten it to work, how difficult was the installation, and have you had any issues with AutoCAD or the like? With this in mind, would you even suggest that I get a MBP?
    Another Boot Camp question. I have read many posts on these boards discussing different partitioning options, yet I still am unsure what they all mean. I expect to use the Windows side for more than just AutoCAD. I likely will install some games on it for when I am bored, and Microsoft Office, as I do not wish to spend the extra money buying Office for Mac and I need to have the versatility of Excel that I have heard is not found in the Mac version. What is the difference between these two partitioning types, which would you recommend, and how much storage should I partition if I get a 200GB hard drive?
    Yet another Boot Camp question, sorry for so many of these. My friend who has a Mac lauds it for its security, nobody makes viruses for Macs. As I will most definitively be using Windows in Boot Camp, would this compromise this security? I know it will be Windows, but I still imagine that it would be encoded somewhat differently then normal, but I could be wrong. Also, if it is possible for the Windows portion to get a virus, could that affect the Mac portion?
    Also, I don't use an iPod. I suppose I always thought they were overpriced for what they do. Instead I use an Iriver Clix 2, and I love it. The only thing is, I use Windows Media Player to sync it with my library. I know many have qualms with WMP, but I personally favor it more than iTunes, but that is just me. I do not believe that you can download it for a Mac. If I were to download it for the Windows portion, I am assuming that I would have to switch to Windows in order to listen to my music then, correct? I can also add music to it via Windows Explorer. Can I do so through the "Finder"?
    Finally, is the battery life any different when using Windows than when using Leopard? I will likely be using the Windows portion in the class room.
    Sorry for the long-winded post, but I am certainly hoping that I can get some solid answers to make an educated decision before getting my next laptop. I would like to thank you very much for any help that you are able to give me. I do hope you can help me quickly. Thank you.
    Message was edited by: Pyrojoe

    I can't answer all your questions, especially not anything having to do with CAD.
    I still imagine that [Windows] would be encoded somewhat differently then normal,
    No. Windows is Windows. You will need a good Windows antivirus, firewall and antispyware program. It is unlikely that a Windows virus will infect the Mac partition because, ordinarily, Windows doesn't know how to do anything with the HFS+ formatted Mac partition. However, the existence of products like MacDrive means that it is possible to teach Windows how to write to the Mac partition, so I see no reason why a virus could not be programmed to.
    If I were to download it for the Windows portion, I am assuming that I would have to switch to Windows in order to listen to my music then, correct? I can also add music to it via Windows Explorer. Can I do so through the "Finder"?
    Yes. Probably/yes.
    Finally, is the battery life any different when using Windows than when using Leopard?
    Yes. Windows does not have the battery management that Leopard has. The battery runs down much quicker in Windows.
    You didn't ask, but depending on what kind of engineering you want to study, you may be interested in, or even need to, use some flavour of Unix/Linux. On the one hand, you could always create a partition on a PC--or wipe Windows--and install Linux on the PC. That could even be a good learning experience. On the other hand, Mac OS is Unix, but preinstalled. So with a Mac, you would already have a platform for writing shell scripts, you would have Perl and Python built-in, you would have an IDE (XCode Tools) for C/C++/Objective C/Java as well as gcc and make tools already on the disks which come with the computer, and so on.
    Message was edited by: Mr.Lobotomy

  • How much does windows 7 version that is used with boot camp?

    hello everybody
    combien coute une version windows 7 que l'on utilise avec boot camp?
    how much does windows 7 version that is used with boot camp?
    thanks

    Wait for Windows 8 2012-10-25 and use the free Preview or Trial version for now is another option.
    Windows 8:
    http://msdn.microsoft.com/en-us/windows/apps/default
    https://blogs.msdn.com/b/b8/
    http://www.zdnet.com/blog/hardware/windows-8-an-installation-walk-through/14768
    http://www.gizmodo.com.au/2012/03/windows-8-on-a-macbook-air-beautiful-and-kinda -broken/

  • I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

    I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
    I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

    While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
    https://discussions.apple.com/community/windows_software/boot_camp

  • I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

    i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

    Kappy wrote:
    Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
    You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
    http://support.apple.com/kb/DL1638
    Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

  • Will Windows 8.1 upgrade work with Boot Camp on OS X Mavericks?

    Will Windows 8.1 upgrade work with Boot Camp on OS X Mavericks?

    Welcome to Apple Support Communities
    Of course. Make a backup of your files in Windows, and install Windows 8.1 as an upgrade. The Windows support software supports it without any issue, so if it is updated, you do not have to worry

  • Can I install Windows 7 with boot camp on my computer, but install all my PC games for it on an external hardrive?

    I have a new Mac, but I want to install Windows 7 with boot camp on it. However, I would only really be using it for gaming.
    On another post, someone said that you could not install boot camp entirely onto an external hardrive. As boot camp would only be for gaming, then could I install all my games (when I'm given the option to chose the file of where to install) onto an external drive which is correctly formatted? (what is the format too?) Also, would USB 3.0 be ok, or would thunderbolt be a better option (hoping its USB)
    Thank you

    you will be fine and either are more than enough for even an SSD.
    NTFS of course.
    Might look thru Google to see if anyone has managed to boot Windows from Thunderbolt, I think someone managed after install and then made a restore image and placed on Tb storage device.

  • Can I install Windows 7 with boot camp, but install all my PC games for it on an external hardrive?

    I have a new Mac, but I want to install Windows 7 with boot camp on it. However, I would only really be using it for gaming.
    On another post, someone said that you could not install boot camp entirely onto an external hardrive. As boot camp would only be for gaming, then could I install all my games (when I'm given the option to chose the file of where to install) onto an external drive which is correctly formatted? (what is the format too?) Also, which would allow for a faster gameplay, USB 3.0 or Thunderbolt? as fast gameplay is important
    Thank you

    How to move steam to another drive: 
    Delete everything in the Steam folder except for the "steam.exe" and the "steamapps" folder
    Move the steam folder over to the secondary drive you want it on
    Open the "steam.exe" and it will reconfigure steam
    Log in and BAM! All your games are recognized
    Now, you can put what ever games you want on the SSD with Steam Mover (or junctions)
    Create another folder on the C:\ drive and name it (C:\Users\Sean\Steam Games)
    Run Steam Mover and have it move the game to that location and you are done!
    Now go play the games you want!
    How to have steam on the SSD while having the games on either the SSD or HDD: 
    Delete everything in the Steam folder except for the "steam.exe" and the "steamapps" folder
    Have the "steam.exe" to a folder made on the C:\ drive (C:\Users\Sean\Steam)
    Have the "steamapps" folder on the HDD you want to store your games (D:\User\Program Files\Steam\steamapps)
    Make a junction from the "steamapps" folder to the SSD folder with the "steam.exe" in it
    Open the "steam.exe" and it will reconfigure steam
    Logged in and BAM! All your games are recognized and steam is on the SSD and the games on the other drive.
    Now, you can put what ever games you want on the SSD with Steam Mover (or junctions)
    Create another folder on the C:\ drive and name it (C:\Users\Sean\Steam Games)
    Run Steam Mover and have it move the game to that location and you are done!
    Now go play the games you want!

Maybe you are looking for

  • Failover cluster not cleanly shutting down service

    I've got a two node 2008 R2 failover cluster.  I have a single service being managed by it that I configured just as a generic service.  The failover works perfectly when the service is stopped, or when one of the machines goes down, and the immediat

  • DW & BBEdit template issues

    Hi there, I'm trying the integration between Dreamweaver (CS4) and BBEdit 9 for the first time, and I largely work on files in DW with templates attached that have large chunks of un-editable sections (grayed out). First, I noticed that once you laun

  • How to download english version iBooks Author from the Belgian store?

    I have downloaded Ibooks Author from the Belgian store and after looking up on prefferences I see that there are no language options.  The version I downloaded seemed to have only French language funcionalities.  I appreciate it if someone can help m

  • Cannot sign in through android app

    I am able to s n to the community and through my browser to change account details but am unable to sign in through my android app. I only have the app and do not have a computer to check anything. It was literally working just early this morning/lat

  • Help: Oracle8i installation on Linux6.0

    I could use some help with the installation of Oracle8i I have downloaded the single file version of the enterprise and I have gotten JDK116_v5 installed and running. I am new to this.. Can any one help. null